Search

The present work is focused on developing Ti-xTa porous alloys processed by the space holder method and solid-state sintering. The volume fraction of Ta ranged between 20 and 30 wt.%. The sintering kinetics was evaluated by dilatometry tests. Sintered materials were characterized by SEM, XRD and computed tomography. Porosity features and permeability were determined from 3D images, and their mechanical properties were evaluated from microhardness and compression tests. The sintering behavior and the final microstructure are driven by the Ta diffusion into the Ti, slowing down the densification and modifying the transition temperature of α-to-β. Due to β-stabilization, martensite α′ was obtained after sintering. Mechanical properties are reduced because of the β-stabilization and pore addition, being predominantly the pore effect. Permeability depended on the pore characteristics, finding values close to the human bones. It was concluded that powder metallurgy generates highly TixTa alloys with a combination of α, β and α′ Ti phases as well as remaining Ta particles that are beneficial to improve the biocompatibility and osseointegration of such materials. Being the Ti25Ta40salt alloy the most suitable for orthopedic implants because of its characteristics and properties. [ABSTRACT FROM AUTHOR]

We present a novel Ti64/20Ag highly porous composite fabricated by powder metallurgy for biomedical applications and provide an insight into its microstructure and mechanical proprieties. In this work, the Ti64/20Ag highly porous composites were successfully fabricated by the space holder technique and consolidated by liquid phase sintering, at lower temperatures than the ones used for Ti64 materials. The sintering densification was evaluated by dilatometry tests and the microstructural characterization and porosity features were determined by scanning electron microscopy and computed microtomography. Permeability was estimated by numerical simulations on the 3D real microstructure. Mechanical properties were evaluated by simple compression tests. Densification was achieved by interparticle pore filling with liquid Ag that does not drain to the large pores, with additional densification due to the macroscopical deformation of large pores. Pore characteristics are closely linked to the pore formers and the permeability was highly increased by increasing the pore volume fraction, mainly because the connectivity was improved. As expected, with the increase in porosity, the mechanical properties decreased. These results permitted us to gain a greater understanding of the microstructure and to confirm that we developed a promising Ti64/20Ag composite, showing E of 7.4 GPa, σy of 123 MPa and permeability of 3.93 × 10−11 m2. Enhanced adaptability and antibacterial proprieties due to Ag were obtained for bone implant applications. [ABSTRACT FROM AUTHOR]

A detailed experimental and numerical investigation was performed on a Ti6Al4V/xCoCrMo biomedical composite for bone implant applications. The aim was to understand the effect generated by the addition of different volume fractions of CoCrMo particles on a Ti6Al4V matrix composite processed by powder metallurgy. Distribution of CoCrMo particles inside a matrix was observed by computed microtomography. Three-dimensional image analysis allowed for the deduction that the mechanism that permitted percolation within the powder mixture was the cluster formation at 30 vol.% of CoCrMo and at a coordination number of Co–Co contacts of 2.8, which confirms existing models. Densification during powder compaction was driven by larger indentations at the Ti–Co contacts for lower quantities of CoCrMo than for those reaching percolation. Sintering was studied by dilatometry tests at 1130 °C, and results indicated that solid-state sintering generated the formation of a rigid skeleton. This endured the stress generated by the eutectic reaction liquid, which filled the interparticle porosity, resulting in relative densities above 90%. Microstructure was analyzed by SEM and X-ray diffraction, and results showed a Ti6Al4V matrix surrounded by a Ti2Co eutectic phase. In addition, the hardness of composites increased up to three times compared to the Ti6Al4V alloy. It was concluded that the best properties were obtained from 20 vol.% of CoCrMo. [ABSTRACT FROM AUTHOR]

A new processing route is proposed to produce graded porous materials by placing particles of Ti6Al4V with different sizes in different configurations to obtain bilayer samples that can be used as bone implants. The sintering behavior is studied by dilatometry and the effect of the layers' configuration is established. To determine pore features, SEM and computed microtomography were used. Permeability is evaluated by numerical simulations in the 3D real microstructures and the mechanical properties are evaluated by compression tests. The results show that a graded porosity is obtained as a function of the size of the particle used. The mechanical anisotropy due to the pore size distribution and the sintering kinetics, can be changed by the particle layer arrangements. The Young modulus and yield stress depend on the relative density of the samples and can be roughly predicted by a power law, considering the layers' configuration on the compression behavior. Permeability is intimately related to the median pore size that leads to anisotropy due to the layers' configuration with smaller and coarser particles. It is concluded that the proposed processing route can produce materials with specific and graded characteristics, with the radial configuration being the most promising for biomedical applications. [ABSTRACT FROM AUTHOR]