Search

Triticale is recognized worldwide because of its high protein and lysine contents, high production capacity, and adaptability to biotic and abiotic stress conditions, these qualities being taken over from wheat and rye. Triticale is widely used in various fields, such as animal feed in various forms, medicine, baking, beer and alcohol brewing, cellulose, bioethanol industry, and many others. Thus, the demand for triticale grain is increasing, and this has led to the research and improvement in culture technology to obtain superior products, both quantitatively and qualitatively. The purpose of this study was to identify the best varieties of triticale cultivated in the northwest of Romania, sown in different plots, and fertilized on the ground. Additionally, this study was carried out over a period of two years at the Livada Agricultural Research and Development Station, Satu Mare County. This study was located on acidic soil with a pH between 5.19 and 6.65 and a humus content of 2.82%. The climatic conditions in the reference period were extremely variable; in the first year, a deficit of more than 90 mm of precipitation was registered, and in the second year of this study, an increase of more than 34 mm. The effects of additional fertilization were influenced by the level of precipitation. In 2023, additional fertilization with foliar fertilizer brought production increases of 884 kg/ha, compared with 2022, where foliar fertilization in drought conditions led to a decrease in production. The Utrifun variety proved to be the most productive; this foliar fertilized and with biostimulator, sown at 550 seeds/m2, recorded an increase in production of over 4500 kg/ha compared with the Negoiu control and sown at 650 seeds/m2 and fertilized with foliar fertilizer had an increase of over 4370 kg/ha compared with the Negoiu control. It recorded a production of 9700 kg/ha sown at 550 seeds/m2 and fertilized only on the soil, and sown at 450 seeds/m2 and additionally fertilized with foliar fertilizer recorded a production of 10.900 kg/ha. Utrifun was followed by Zvelt which, sown at 450 seed/m2 and fertilized on the soil, recorded 9500 kg/ha, ensuring an increase of 1800 kg/ha compared with the Negoiu control. The lowest production was achieved by the Tulnic variety, which is 2022, sown at 650 seed/m2 and fertilized on the ground, recorded 5874 kg/ha, 1621 kg/ha less than the control variant. The increases in production obtained by these varieties will be confirmed in a subsequent study under different climatic conditions. [ABSTRACT FROM AUTHOR]

Lager yeast, which is mainly used for lager beer brewing, withstands significant oxidative stress during brewing process, leading to its rapid aging in serial beer brewing. Mitophagy plays a critical role in the antioxidant stress response of yeast. However, the relationship between mitophagy and the antioxidant capacity of yeast is still unclear. Previous studies indicated that ATG gene family in mitophagy significantly affects the antioxidant capacity of yeast cells in beer brewing. Herein, the expression of ATG8, ATG11, ATG32, DNM1, and MMM1 genes was regulated. The results showed that the overexpression of ATG8 and ATG11 significantly reduced the intracellular ROS contents to 52.05% and 22.57% of the initial state, respectively, and helped to maintain a high mitochondrial vitality during serial fermentation. Disruption of ATG8, ATG11 and ATG32 resulted in significant decrease in cell vitality when exposed to H2O2 stimulation. Meanwhile, the disruptions of these genes were detrimental to the balance of intracellular ROS. Excess DNM1 activity could affect the cellular energy balance and ATP depletion under prolonged stress conditions. The repression of MMM1 led to lower ATP levels during serial beer fermentation. The ATG8, ATG11, and ATG32 genes might be potential targets for regulating the antioxidant capacity of yeast. The current work provides new insights into improving the antioxidant capacity of yeast through mitophagy regulation. [ABSTRACT FROM AUTHOR]

An increase in the consumer demand and the availability of gluten-free products has led to several brewers investigating brewing with grains other than barley. The primary grain of choice has been sorghum. These new gluten-free beers have a unique flavor and aroma, which previous research has shown is the result of differences in concentration for key chemical compounds, including ethyl butyrate, butyl acetate, isoamyl acetate, ethyl caproate, hexyl acetate, 1-octanol, nonanal, ethyl octanoate, and ethyl decanoate. This study focused looked at the influence different strains of yeast had on the concentration of these key compounds. Beer was brewed using either barley or sorghum malt extract. The concentrations of these key volatile compounds were determined using Solid Phase Microextraction (SPME) with Gas Chromatography and Mass Spectral (GC-MS) detection. Overall, it was found that the concentrations of these compounds were statistically different in the beers brewed from these two grain types. However, the yeast strain had no significant impact on the concentrations. [ABSTRACT FROM AUTHOR]

In recent years, demand for low-alcohol and alcohol-free beers has been rising. Of the many methods of producing such beers, many have expensive implementation requirements or drawbacks in terms of beer quality. The exploration of non-Saccharomyces yeast species presents a promising opportunity to overcome these challenges. These yeasts, with their diverse metabolic capabilities and unique flavor profiles, offer the potential to create innovative and flavorful low-alcohol beers. The study investigates the feasibility of using selected non-Saccharomyces yeasts for brewing low-alcohol beers, focusing on fermentation kinetics, physicochemical parameters, and the sensory attributes of the final product. The evaluated yeast species were Kluyveromyces lactis MG971263, Metschnikowia pulcherrima MG971247 and MG971250, Torulaspora delbrueckii MG971248, Wickerhamomyces anomalus MG971261, and W. onychis MG971246. Two strains of Saccharomyces cerevisiae were used as a control. The results of the study show that selected non-Saccharomyces yeast species might be used to produce low-alcohol beers. The non-Saccharomyces yeast allowed the researchers to obtain beers with an alcohol content in the range of 0.5–1.05%, while the control beer brewed with US-05 had an alcohol content of 3.77%. Among the evaluated strains, the strains M. pulcherrima MG971250 and T. delbrueckii MG971248 were found to be rated better in a sensory evaluation than the brewed and low-alcohol strains of S. cerevisiae. [ABSTRACT FROM AUTHOR]

The hop variety Saaz is well known over the world and is usually used for brewing of lager beers. Recently, the new related varieties Saaz Late, Brilliant, Comfort, and Shine were registered. Information about these varieties is splintered and often available only in the Czech language in regional journals. This review (i) summarizes previously published data (breeding history, genetic data, basic parameters such as yield, sensory profile, concentrations of key technologically important hop compounds), (ii) presents long-term data (2004–2021), and (iii) shows similarities/differences among these varieties. All Saaz varieties are typically fine aroma hops with a relatively low content of alpha bitter acids ranging from 5 to 7 wt%, cohumulone amounts lower than 30% rel., and hop oil content of about 1.0 wt%. Even though the new varieties have no identical chemical parameters to the original Saaz, they can substitute this established standard as well. Furthermore, the varieties Saaz Comfort and Saaz Shine show high resistance to Pseudoperonospora humuli as well as very good tolerance to drought. [ABSTRACT FROM AUTHOR]

The production of beer, a beverage of global cultural and industrial importance, has a significant impact on the environment due to the use of natural resources and the emissions generated during the various stages of the production process. Therefore, this article examines the sustainability of beer production through a review of literature articles that have used Life Cycle Assessment (LCA) to assess its environmental impacts. A systematic literature review was conducted by selecting peer-reviewed articles published between 2001 and July 2024 using databases such as Scopus and Google Scholar. The search included studies analyzing different stages of the beer life cycle, from raw material production to packaging and distribution, using specific keywords related to LCA and brewing. The results showed that energy use and packaging are the two critical aspects identified in the review, which represent a significant part of the environmental footprint. However, it is important to note that the available studies on the subject are few and heterogeneous and they use different methodologies, impact categories, and functional units, which complicates the comparison and synthesis of results, limiting the ability to draw definitive conclusions. Recommendations were made to improve sustainability, including the adoption of more efficient technologies, the use of recycled materials for packaging, and the implementation of sustainable agricultural practices. These strategies could aim to significantly reduce the overall environmental impact of beer production. [ABSTRACT FROM AUTHOR]

This study explored beer consumers' and producers' perceptions of using local fruit and agroindustrial by-products in brewing. An online survey was conducted in Italy with 496 beer consumers and 54 beer producers. The survey assessed sociodemographic information, consumption behavior, and support for brewery neolocalism, along with brewers' perceptions of the sustainability of their breweries. Findings showed high consumers' involvement in sustainable eating and high support for breweries utilizing local resources and operating in a sustainable way. Breweries rated their sustainability practices as moderate, and most of them considered their efforts in using local raw materials and repurposing by-products as "excellent". Both consumers and producers considered beer made with agroindustrial by-products less tasty than those with local fruit (p < 0.05), but no significant difference in willingness to buy was observed (p > 0.05). According to cluster analysis results, the ideal consumer profile for sustainable beers was characterized by a higher proportion of females prioritizing sustainability and local sourcing over sensory quality. Therefore, using local materials or agroindustrial by-products can align brewers' practices with consumers' preferences, enhancing competitiveness and market positioning by fostering a sense of sustainability and locality. [ABSTRACT FROM AUTHOR]

Bottle conditioning of beer is an additional fermentation step where yeast and fermentable extract are added to the beer for carbonation. During this process, yeast must overcome environmental stresses to ensure sufficient fermentation in the bottle. Additionally, the yeast must be able to survive for a prolonged time, as a decline in viability will lead to alterations in the product. Here, we investigated the effects of bottle conditioning on beer using six different yeast strains from the brewing, wine making, and distilling industries over 120 days. The ale and lager strains resulted in a beer possessing typical characteristics of a pale ale-style beer, whereas sparkling wine and distilling yeast strains resulted in aromas that were uncharacteristic, which was expected. In addition, we observed that the various strains had different propensities to survive during bottle conditioning. Proteomic analysis was performed to ascertain protein abundance changes and reveal biological processes that potentially enabled specific yeast strains to survive longer during secondary fermentation. Our results showed that proteins associated with oxidoreductase activity and mitochondrial ribosomes were increased in the yeast strain with superior survival and were able to respond to cellular stress more effectively, whereas proteins associated with cell wall modulation were increased in the strain with poor survival characteristics. Overall, we demonstrated the impact of yeast selection on bottle conditioning and the biological processes involved in yeast physiology under these conditions. [ABSTRACT FROM AUTHOR]

Red clover (Trifolium pratense) is a fodder plant grown in many regions of the world. It is also known as a medicinal plant. Red clover contains large amounts of isoflavones, which are, due to their similarity to estrogen, called phytoestrogen; it is believed that they can increase the concentration of estrogen in women. Some studies have refuted this information, but this topic is still being researched. The aim of the work was to produce beer to which red clover is added during the boiling phase and to monitor the transfer of isoflavones from red clover to beer. Red clover was not added to the control sample during boiling. During production and fermentation, the basic physical-chemical properties of wort and beer were monitored, as well as acceptability among potential consumers, which was determined by sensory analysis. The results show that phytoestrogens do end up in beer. The analyzed beer contained biochanin A, formononetin, genistein, and daidzein, in a total concentration of 12.42 µg/mL. The control sample contained none of the aforementioned compounds. Sensory analysis gave promising results, and the tested consumers all approved the taste, smell, and aroma of the produced beer. The most notable aroma that was singled out by consumers was "hay-like". [ABSTRACT FROM AUTHOR]

Over the last two decades, the craft beer industry has significantly developed with the emergence of thousands of microbreweries all over the world. These are mostly small companies that cannot afford the cost of the process monitoring systems that are usually embedded in the machinery used by industrial breweries, but they need to monitor and control the production process in order to guarantee a constant quality of beer. The development of low-cost systems for monitoring the production process would help microbreweries obtain the desired product quality consistency. In this paper, the authors propose a low-cost system for the real-time identification of the different phases of the alcoholic fermentation of beer. The first results prove the ability of the proposed system to monitor the fermentation and to detect anomalies in the process promptly. [ABSTRACT FROM AUTHOR]

This study focuses on the diversified utilization of the sugarcane industry, and sugarcane syrup, as a by-product of the sugarcane industry, is a good raw material for fermentation. Bringing sugarcane syrup into beer is conducive to the enrichment of the sugar industry, and it can improve the flavor of beer and make it more aromatic. This study determined the optimal fermentation process for beer. By analyzing the consumption rate of the carbon and nitrogen sources of raw materials, the nutrient utilization of yeast, and the causes of differences in flavor substances, the flavor composition and flavor stability of beer were determined by SPME-HS-GC-MS technology. The results showed that beer brewed with sugarcane syrup as an auxiliary raw material met the basic specifications of beer. The addition of sugarcane syrup to the wort base increased the utilization of amino acids by the yeast, and LS (lager with added cane syrup) increased the nine flavor compounds of the beer, which constituted the basic flavor of the beer, bringing new flavor compounds compared with the normal all-barley beer. Forced aging experiments showed that LS produced fewer aging compounds than OWBL. Various experiments have shown that it is feasible to ferment beer with sugarcane syrup instead of partial wort. [ABSTRACT FROM AUTHOR]

Sour beers play an important role in the brewing market, and their production has been growing exponentially. In light of this, six microorganisms directly related to this class of beer were studied, and the fermentation behavior of six strains used in the past for traditional commercial Berliner Weisse beer production was monitored. The microorganisms used were Lactobacillus brevis, Lactobacillus parabrevis, Brettanomyces bruxellensis, and Brettanomyces anomalus and two strains of Saccharomyces cerevisiae. The six microorganisms were selected in a previous work, and a comparison between single and mixed fermentations was carried out via daily measurements of the fermentation parameters like pH, extract, and cell count during 22 days. The ability to isolate a specific microorganism from a mixed culture was investigated using three commonly used nutrient media and aerobic/anaerobic growth conditions. Both Lactobacillus and Brettanomyces could be isolated; however, the conditions imposed were not sufficient in order to isolate Saccharomyces. Fermentations carried out with LAB and Brettanomyces showed a decrease in Lactobacillus growth if compared to pure fermentations, but no influence on the growth of Brettanomyces could be perceived. In general, fermentations carried out in the presence of Saccharomyces were dominated by this yeast. Its quick growth seems to be responsible for the high end pH values observed as well as the decrease in cell growth for both LAB and Brettanomyces. A decrease in the cell viability of Saccharomyces was followed by an increased growth of the other microorganisms involved, possibly meaning that the molecules released through apoptosis are used by both LAB and Brettanomyces as a valuable nutrient source. The volatile compound concentrations of the first group were higher in fermentations with Saccharomyces, whereas esters' concentration was higher in fermentations carried out only with Brettanomyces and Lactobacillus. Furthermore, understanding how these microorganisms interact during the fermentation process can help brewers better control production and ensure the consistency in the quality of the final product. The end pH values and acidity reached levels acceptable for Berliner Weisse beer. This innovative approach certainly contributes to the evolution and refinement of the art of brewing. [ABSTRACT FROM AUTHOR]

The exploration of space is becoming more feasible, and with this comes the possibility of performing fermentations in microgravity. Our study explores the potential effects of microgravity on a standard brewing model fermentation. As the fermentation of barley wort has been studied for centuries, there is an established foundation of knowledge with which to compare any changes that occur under microgravity. A modified ASBC miniature fermentation protocol (Yeast-14) was conducted within a Yuri 2.0 microgravity chamber to examine the response of Saccharomyces pastorianus to simulated microgravity conditions. Our findings reveal that yeast exhibited accelerated growth rates under microgravity compared to standard conditions. Additionally, the microgravity environment led to significantly lower levels of volatile compounds such as isoamyl acetate and 2-phenethyl acetate in the final product. Further genetic analysis showed significant downregulation of the ATF2 gene in the control group, potentially the mechanism behind the observed decrease in volatile compounds. These results show that while fermentation under microgravity is likely to eventually be commonplace, there may be changes in rate and gene expression that are beneficial or detrimental to the final product depending upon the desired characteristics. [ABSTRACT FROM AUTHOR]

In this study, a critical review was carried out using the Web of ScienceTM Core Collection database to analyse the scientific literature published to date to identify lines of research and future perspectives on the presence of chemical pollutants in beer brewing. Beer is one of the world's most popular drinks and the most consumed alcoholic beverage. However, a widespread challenge with potential implications for human and animal health is the presence of physical, chemical, and/or microbiological contaminants in beer. Biogenic amines, heavy metals, mycotoxins, nitrosamines, pesticides, acrylamide, phthalates, bisphenols, microplastics, and, to a lesser extent, hydrocarbons (aliphatic chlorinated and polycyclic aromatic), carbonyls, furan-derivatives, polychlorinated biphenyls, and trihalomethanes are the main chemical pollutants found during the beer brewing process. Pollution sources include raw materials, technological process steps, the brewery environment, and packaging materials. Different chemical pollutants have been found during the beer brewing process, from barley to beer. Brewing steps such as steeping, kilning, mashing, boiling, fermentation, and clarification are critical in reducing the levels of many of these pollutants. As a result, their residual levels are usually below the maximum levels allowed by international regulations. Therefore, this work was aimed at assessing how chemical pollutants appear and evolve in the brewing process, according to research developed in the last few decades. [ABSTRACT FROM AUTHOR]

Humulus lupulus (hop) is a necessary material in beer brewing because its female inflorescences (called hop cones) give a floral aroma, bitterness and foam stability to beer. Various aspects of growth conditions in the cultivation area, especially temperature, strongly affect the yield and quality of hop cones. Recent estimates suggest that climate change accompanied by global warming is negatively impacting hop production, with high temperatures reducing the expression of genes that regulate beneficial secondary metabolites in hops. This underscores the need for techniques to enhance hop tolerance to high temperatures. This study explores the potential of N-acectylglutamic acid (NAG), a non-proteinogenic amino acid, to confer hops with tolerance against oxidative and heat stress by suppressing ROS accumulation. Exogenous NAG treatment activated the expression of HlZAT10/12 and HlHSFA2, which are putative homologues considered master regulators in response to oxidative and heat stress in Arabidopsis thaliana (Arabidopsis). Additionally, histone acetylation, a histone modification associated with transcriptional activation, was increased at these stress-responsive genes in the NAG-treated hops. These findings reveal NAG as a potential chemical compound to mitigate hop production reduction caused by high temperatures and suggest the conservation of epigenetic modification-mediated regulation of gene expression in response to environmental stresses in hops. [ABSTRACT FROM AUTHOR]

The diversity of alcohol beverage microorganisms is of great significance for improving the brewing process and the quality of alcohol beverage products. During the process of making alcoholic beverages, a group of microorganisms, represented by yeast and lactic acid bacteria, conducts fermentation. These microorganisms have complex synergistic or competitive relationships, and the participation of different microorganisms has a major impact on the fermentation process and the flavor and aroma of the product. Strain selection is one of the key steps. Utilizing scientific breeding technology, the relationship between strains can be managed, the composition of the alcoholic beverage microbial community can be improved, and the quality and flavor of the alcoholic beverage products can be increased. Currently, research on the microbial diversity of alcohol beverages has received extensive attention. However, the selection technology for dominant bacteria in alcohol beverages has not yet been systematically summarized. To breed better-quality alcohol beverage strains and improve the quality and characteristics of wine, this paper introduces the microbial diversity characteristics of the world's three major brewing alcohols: beer, wine, and yellow wine, as well as the breeding technologies of related strains. The application of culture selection technology in the study of microbial diversity of brewed wine was reviewed and analyzed. The strain selection technology and alcohol beverage process should be combined to explore the potential application of a diverse array of alcohol beverage strains, thereby boosting the quality and flavor of the alcohol beverage and driving the sustainable development of the alcoholic beverage industry. [ABSTRACT FROM AUTHOR]

Biosynthesized silver nanoparticles (AgNPs) are widely used in varied applications, which are morphology dependent. Consequently, a morphology-controlled synthesis is mandatory. Although there are several studies focused on the plant extract-based biosynthesis of metallic nanoparticles, the use of extracts obtained from agro-wastes is scant. Furthermore, information regarding morphology modification through the use of additional agents is even more scarce. Thus, in this study, AgNPs were synthesized using a malt extract (ME) obtained from an artisanal beer brewing process residue. Additionally, sodium chloride (NaCl), gum arabic (GA), and talc (T) were used in an attempt to modify the morphology of AgNPs. XRD, DLS, SEM, and TEM results demonstrate that stable AgNPs of different sizes and shapes were synthesized. FTIR, HPLC analysis, and the quantification of total proteins, free amino acids, reducing sugars, and total polyphenols before and after AgNPs synthesis showed that ME biomolecules allowed them to act as a source of reducing and stabilizing agents. Therefore, this study provides evidence that ME can be successfully used to biosynthesize AgNPs. Additionally, the antibacterial activity of AgNPs against Gram-negative and Gram-positive bacteria was evaluated. Results indicate that AgNPs show a higher antibacterial activity against Gram-positive bacteria. [ABSTRACT FROM AUTHOR]

Increasingly high interest in yeast–yeast interactions in mixed-culture fermentation is seen along with beer consumers' demands driving both market growth and requests for biotechnological solutions that can provide better sensory characteristics. In this study, Lachancea thermotolerans and Saccharomyces cerevisiae with a cell population ratio of 10:1 were inoculated for sour beer fermentation while the process conditions within the brewing industry remained unchanged. With L. thermotolerans producing lactic acid (1.5–1.8 g/L) and bringing down the pH to 3.3–3.4 whilst adding no foreign flavors herein, this study revealed a new natural, fruity sour beer with a soft, sour taste. In this study, the double-yeast mixed-culture fermentation produced more flavor substances than a single-culture process, and plenty of isobutyl acetate and isoamyl acetate enhanced the fruit aroma and balanced the sour beer with a refreshing taste. While playing a positive role in improving the beer's quality, the double-yeast mixed-culture fermentation developed in this study helps to offer an alternative mass production solution for producing sour beer with the processes better controlled and the fermentation time reduced. The stress responses of the L. thermotolerans during the fermentation were revealed by integrating RNA sequencing (RNA-Seq) and metabolite data. Given that the metabolic flux distribution of the S. cerevisiae during the fermentation differed from that of the non-Saccharomyces yeasts, transcriptional analysis of non-Saccharomyces yeast and S. cerevisiae could be suitable in helping to develop strategies to modulate the transcriptional responses of specific genes that are associated with the aroma compounds released by S. cerevisiae and non-Saccharomyces yeasts. In the case of some non-Saccharomyces yeast species/strains, the diversion of alcoholic fermentation and the formation of a great number of secondary compounds may, in part, account for the low ethanol yield. [ABSTRACT FROM AUTHOR]

The ascendency of the craft beer movement within the brewing industry may be attributed to its commitment to unique flavours and innovative styles. Mixed-culture fermentation, celebrated for its novel organoleptic profiles, presents a modelling challenge due to its complex microbial dynamics. This study addresses the inherent complexity of modelling mixed-culture beer fermentation while acknowledging the condition monitoring limitations of craft breweries, namely sporadic offline sampling rates and limited available measurement parameters. A data-driven solution is proposed, utilising an Autoregressive Recurrent Neural Network (AR-RNN) to facilitate the production of novel, replicable, mixed-culture fermented beers. This research identifies time from pitch, specific gravity, pH, and fluid temperature as pivotal model parameters that are cost-effective for craft breweries to monitor offline. Notably, the autoregressive RNN fermentation model is generated using high-frequency multivariate data, a departure from intermittent offline measurements. Employing the trained autoregressive RNN framework, we demonstrate its robust forecasting prowess using limited offline input data, emphasising its ability to capture intricate fermentation dynamics. This data-driven approach offers significant advantages, showcasing the model's accuracy across various fermentation configurations. Moreover, tailoring the design to the craft beer market's unique demands significantly enhances the model's practicable predictive capabilities. It empowers nuanced decision-making in real-world mixed-culture beer production. Furthermore, this model lays the groundwork for future studies, highlighting transformative possibilities for cost-effective model-based control systems in the craft beer sector. [ABSTRACT FROM AUTHOR]

Although proline is the most or second most abundant amino acid in wort and grape must, it is not fully consumed by the yeast Saccharomyces cerevisiae during alcoholic fermentation, unlike other amino acids. Our previous studies showed that arginine, the third most abundant amino acid in wort, inhibits the utilization of proline in most strains of S. cerevisiae. Furthermore, we found that some non-Saccharomyces yeasts utilized proline in a specific artificial medium with arginine and proline as the only nitrogen source, but these yeasts were not suitable for beer fermentation due to their low alcohol productivity. For yeasts to be useful for brewing, they need to utilize proline and produce alcohol during fermentation. In this study, 11 S. cerevisiae strains and 10 non-Saccharomyces yeast strains in the Phaff Yeast Culture Collection were identified that utilize proline effectively. Notably, two of these S. cerevisiae strains, UCDFST 40-144 and 68-44, utilize proline and produce sufficient alcohol in the beer fermentation model used. These strains have the potential to create distinctive beer products that are specifically alcoholic but with a reduction in proline in the finished beer. [ABSTRACT FROM AUTHOR]

Dry-hopping is the addition of hops to the wort on the cold side of the brewing process. Unlike standard hop additions, its main purpose is not to produce a characteristic bitterness but to extract as much of the hop essential oils as possible, which are largely lost in the standard hopping process. When dry-hopped, it is possible to obtain a beer with an aroma that is difficult to achieve when hops are used on the hot side of the brewing process. As a result, this process has become very popular in recent years, particularly in beers that belong to the 'craft beer revolution' trend. In addition, the usefulness of this process is increasing with the development of new hop varieties with unique aromas. This article presents the main components of hops, focusing on those extracted during the process. Changes in the composition of beer bittering compounds and essential oils resulting from this process are discussed. This paper presents the current state of the knowledge on the factors affecting the degree of extraction, such as hop dosage, the time, and temperature of the process. Issues such as process-related physicochemical changes, hop creep, low flavor stability, haze formation, and green flavor are also discussed. [ABSTRACT FROM AUTHOR]

Yeasts are ubiquitously present in different natural sources. Some of these yeasts have interesting characteristics for the production of fermented food products. This study characterized Lachancea thermotolerans and L. quebecensis isolated from insects to determine their brewing potential. The yeasts were evaluated according to their fermentative potential in glucose and maltose-defined media and their resistance to ethanol and hop. Finally, craft beer was elaborated at a laboratory scale (10 L). The yeasts utilized glucose as the only carbon source and produced 3.25 ± 1.77, and 4.25 ± 1.06% (v/v), of ethanol for L. thermotolerans and quebecensis, respectively. While in the maltose-defined medium, ethanol content reached 3.25 ± 0.45, and 3.92 ± 0.36, respectively. The presence of alpha acids and ethanol affected the growth of L. quebecensis, which showed lower growth at 90 IBU and 8 ethanol% (v/v) mixtures. The craft beer brewed with L. quebecensis in monoculture experiments showed fruity flavors associated with ethyl acetate and isoamyl acetate. The ethanol content reached 3.50 ± 0.46% (v/v). The beer pH was 4.06 ± 0.20, with a lactic acid concentration of 1.21 ± 0.05 g/L. The sensory panel identified the beer as "fruity", "floral", "hoppy", "sweet", and "sour". To our knowledge, this is the first time L. quebecensis was reported as a potential candidate for sour beer production with reduced ethanol content. [ABSTRACT FROM AUTHOR]

Among them, the brewing microorganisms mainly come from I Jiuqu i , pit mud and fermented grains, and together affect the brewing process and flavor quality of I Baijiu i and rice wine. A large number of aroma-producing yeasts are found in the fermentation process of I Baijiu i , and the application of these yeasts in fruit wine fermentation can help improve the flavor of fruit wine. Food brewing technology is an important technology in the modern worldwide food industry, which uses the specific traits of microorganisms to produce food by traditional or modern engineering techniques. During the brewing process, a variety of brewing microorganisms use sugar, cellulose and other raw materials to grow and produce more than 100 flavor substances, which can form different flavor types of I Baijiu i and rice wine. [Extracted from the article]

Most agro-industrial wastes are lignocellulosic biomass. Several technologies have been developed to convert these residues to value-added products. Among these processes, pyrolysis refers to the thermal degradation of organic materials. Microwave-assisted pyrolysis (MAP) is more advantageous than conventional pyrolysis because it offers time savings, increases heating efficiency, and promotes a more precise process control. In this work, the microwave-assisted pyrolysis (MAP) of brewer's spent grain (BSG), the main waste of the brewing industry, was studied, focusing on its liquid product. The effects of temperature, moisture content, and catalyst (calcium oxide) percentage on the product distribution and hydrocarbon content in the liquid product obtained were investigated. Although a high liquid yield of 71.8% was achieved with a BSG moisture content of 14%, the quality of the product (hydrocarbon yield) in this condition was not so attractive (21.60%). An optimization study was carried out to simultaneously maximize bio-oil yield and quality. The optimum conditions obtained were a temperature of 570 °C and a catalyst/biomass ratio of 12.17%. The results of the liquid product composition at the optimum point are promising given the presence of aromatic hydrocarbons, organic compounds of great interest to the industry. [ABSTRACT FROM AUTHOR]

Plastic pollution and food waste are two pressing global challenges that require immediate attention and innovative solutions. In this study, we address these challenges by upcycling brewers' spent grain (BSG) into biodegradable composite films. BSG, a by-product of the beer brewing process, is commonly discarded in landfills or used as animal feed. By utilizing BSG as a raw material for biodegradable films, we simultaneously reduce waste and decrease plastic pollution. To create the composite films, we employed poly(vinyl alcohol) (PVA) and glycerol as binder materials, along with hexamethoxymethylmelamine (HMMM) as a water-repelling agent. By varying the ratios of these components, we investigated the effects on film properties. Our characterization included assessing moisture uptake and tensile properties. The results revealed that the practical BSG content in the films was 20–60 wt%. Films with this composition exhibited a balance between moisture absorption and mechanical strength. The addition of glycerol improved the flexibility and toughness of the films, while HMMM reduced moisture absorption, enhancing their water resistance. This study contributes to the development of sustainable materials by showcasing the potential of upcycling BSG into valuable biodegradable films. By transforming food waste into useful applications, we reduce environmental burdens and promote a circular economy. Further research is warranted to explore the potential applications and optimize the properties of BSG-based composites. [ABSTRACT FROM AUTHOR]

Pichia kudriavzevii is one of the major non-Saccharomyces cerevisiae yeasts in Chinese baijiu brewing, which has shown a substantially higher tolerance to acid, heat, and ethanol. Exploring the mechanism of P. kudriavzevii could have a positive effect on the artificially controlled production of baijiu. In this study, an efficient acetic-acid-tolerant P. kudriavzevii strain, Y2, was isolated from the yellow water of strong-flavored baijiu brewing waste, and its molecular mechanism of acetic acid tolerance was investigated through a comparative transcriptomic analysis. The strain Y2 could tolerate 12 g/L of acetic acid. According to the Kyoto Encyclopedia of Genes and Genomes (KEGG) pathway enrichment analysis, differentially expressed genes (DEGs) were mainly enriched in oxidative phosphorylation, the citrate cycle, glycolysis/gluconeogenesis, and carbon metabolism under low (AL group) and high (AH group) concentrations of acetic acid. However, the DEG enrichment was more profound in the AH group when compared to the control. Compared with the AL group, the expression of genes related to oxidative phosphorylation was more significantly upregulated, while in terms of the TCA cycle, phosphoenolpyruvate carboxykinase was significantly upregulated in both the AH and AL groups and was positively correlated with tolerance to acetic acid. This was followed by citrate synthase, isocitrate dehydrogenase, malate dehydrogenase, and succinate dehydrogenase. These results illustrated a possible mechanism of acid tolerance by regulating the metabolism-related pathways in P. kudriavzevii and provided a basis for the further investigation of the acid tolerance mechanism. [ABSTRACT FROM AUTHOR]

To the best of our knowledge, there are no studies on the effects of molecular hydrogen (H2) on microorganisms. In this study, we performed co-culture experiments using two microorganisms involved in sake brewing: sake yeast strain K1401 and the kuratsuki bacterium Kocuria strain TGY1127_2. The cells were suspended in water or water containing H2 and statically incubated at 4 °C for 2 h before co-culture. Sake taste was estimated using a taste sensor. The taste of sake was affected by H2 treatment of kuratsuki Kocuria as well as sake yeast. These results strongly suggest that H2 treatment alters the physiology of kuratsuki bacteria and sake yeast. We showed that sake undergoes H2 treatment of the microorganisms involved in sake brewing to boost its variety and meet the market demand. [ABSTRACT FROM AUTHOR]

Beer is one of the oldest and most common beverages worldwide. The phenolic contents and antioxidant properties of beer are crucial factors in evaluating its nutritional quality. Special beers brewed with the addition of adjuncts are gaining in consumer preference, in response to demands for healthy food and new gustatory and olfactory stimuli. Many studies recently dealt with functional beers brewed with the addition of adjuncts. This review focuses on bioactive molecules, particularly the composition of phenolic compounds, and the antioxidant activity of beer. The current knowledge concerning the effect of the addition of adjuncts in the form of fruit, vegetables, herbs, and natural foods on the polyphenol content, antioxidant properties, and phenolic profile of beer is reviewed, with an outline of the emerging trends in brewing processes. Future studies need to complete the identification and characterization of the bioactive molecules in beer, as well as studying their absorption and metabolic fate in humans. [ABSTRACT FROM AUTHOR]

The food and beverage industry is constantly evolving, and consumers are increasingly searching for premium products that not only offer health benefits but a pleasant taste. A viable strategy to accomplish this is through the altering of sensory profiles through encapsulation of compounds with unique flavors. We used this approach here to examine how brewing in the presence of yeast cells encapsulated in alginate affected the sensory profile of beer wort. Initial tests were conducted for various combinations of sodium alginate and calcium chloride concentrations. Mechanical properties (i.e., breaking force and elasticity) and stability of the encapsulates were then considered to select the most reliable encapsulating formulation to conduct the corresponding alcoholic fermentations. Yeast cells were then encapsulated using 3% (w/v) alginate and 0.1 M calcium chloride as a reticulating agent. Fourteen-day fermentations with this encapsulating formulation involved a Pilsen malt-based wort and four S. cerevisiae strains, three commercially available and one locally isolated. The obtained beer was aged in an amber glass container for two weeks at 4 °C. The color, turbidity, taste, and flavor profile were measured and compared to similar commercially available products. Cell growth was monitored concurrently with fermentation, and the concentrations of ethanol, sugars, and organic acids in the samples were determined via high-performance liquid chromatography (HPLC). It was observed that encapsulation caused significant differences in the sensory profile between strains, as evidenced by marked changes in the astringency, geraniol, and capric acid aroma production. Three repeated batch experiments under the same conditions revealed that cell viability and mechanical properties decreased substantially, which might limit the reusability of encapsulates. In terms of ethanol production and substrate consumption, it was also observed that encapsulation improved the performance of the locally isolated strain. [ABSTRACT FROM AUTHOR]

In recent years, brewer's spent grain (BSG) has gained attention as a plant-based protein source because it occurs in large quantities as a by-product of beer brewing. BSG can contribute to future food requirements and support the development of a circular economy. In light of the dynamic developments in this area, this review aims to understand the proteins present in BSG, and the effect of extraction techniques and conditions on the composition, physicochemical, and techno-functional properties of the obtained protein extracts. The water-insoluble hordeins and glutelins form the major protein fractions in BSG. Depending on the beer brewing process, the extraction technique, and conditions, the BSG protein isolates predominantly contain B, C, and ϒ hordeins, and exhibit a broad molecular weight distribution ranging between <5 kDa and >250 kDa. While the BSG isolates obtained through chemical extraction methods seem promising to obtain gelled food products, physical and enzymatic modifications of BSG proteins through ultrasound and proteolytic hydrolysis offer an effective way to produce soluble and functional protein isolates with good emulsifying and foaming capabilities. Specifically tailored protein extracts to suit different applications can thus be obtained from BSG, highlighting that it is a highly valuable protein source. [ABSTRACT FROM AUTHOR]

Glycated hemoglobin (HbA1c) is the most important factor in diabetes control. Since HbA1c reflects the average blood glucose level over the preceding three months, it is unaffected by a patient's activity level or diet before a test. Noninvasive HbA1c measurement reduces both the pain and complications associated with fingertip piercing to collect blood. Photoplethysmography is helpful for measuring HbA1c without blood samples. Herein, only two wavelengths (615 and 525 nm) were used to estimate HbA1c noninvasively, where two different ratio calibrations were applied and their performances were compared to a work that used three wavelengths. For the fingertip type, the Pearson's r values for HbA1c estimates were 0.896 and 0.905, considering the ratio calibrations for the blood vessel and whole finger models, respectively. Using another value (HbA1c) calibration in addition to the ratio calibrations, we could improve this performance such that the Pearson's r values of the HbA1c levels were 0.929 and 0.930 for the blood vessel and whole finger models, respectively. In a previous study, using three wavelengths, the Pearson's r values were 0.916 and 0.959 for the blood vessel and whole finger models, respectively. Here, the RCF of the S p O 2 estimation was 0.986 when the S p O 2 ratio calibration was applied, while in a previous study, the RCF values of the S p O 2 estimation were 0.983 and 0.986 for the blood vessel and whole finger models, respectively. Thus, we have shown that HbA1c estimation using only two wavelengths has a comparable performance to previous studies. [ABSTRACT FROM AUTHOR]

The study of emotional responses from consumers toward beer products is an important digital tool to obtain novel information about the acceptability of beers and their optimal physicochemical composition. This research proposed the use of biometrics to assess emotional responses from Mexican beer consumers while tasting top- and bottom-fermented samples. Furthermore, a novel emotional validation assessment using proven evoking images for neutral, negative, and positive emotions was proposed. The results showed that emotional responses obtained from self-reported emoticons and biometrics are correlated to the specific emotions evoked by the visual, aroma, and taste aspects of beers. Consumers preferred bottom-fermentation beers and disliked the wheat-based and higher-bitterness samples. Chemical compounds and concentrations were in accordance to previously reported research for similar beer styles. However, the levels of hordenine were not high enough to evoke positive emotions in the biometric assessment, which opens additional research opportunities to assess higher concentrations of this alkaloid to increase the happiness perception of low or non-alcoholic beers. [ABSTRACT FROM AUTHOR]

Beer is the most consumed alcoholic beverage; with 177.5 million kiloliters produced every year, it is one of the most relevant food products. Diacetyl is a typical byproduct of yeast metabolism that is formed during the fermentation inside breweries. The perception of this high volatile and butter-like flavor molecule varies according to the kind of beer, from a positive and highly sought characteristic to a characteristic that is avoided. Furthermore, its toxicity when inhaled has been proven. Typical diacetyl analysis includes voltametric detection and chromatographic analysis techniques. Using metal oxide sensors (MOS), this analysis can become fast and cost-effective, evaluating the differences in diacetyl concentrations through resistance variation. The S3+ (Nano Sensor Systems s.r.l.; Reggio Emilia, Italy; device can recognize volatile compounds through a tailormade array of different materials. The results can be shown on a PCA that is directly generated by the instruments and can be used to manage the productive process through an IoT integrated system. Testing different beer typology through electrochemical sensors allows for the validation of this new approach for diacetyl evaluation. The results have shown an excellent ability to detect diacetyl in different beer samples, perfectly discriminating among different concentrations. [ABSTRACT FROM AUTHOR]

Most gluten analysis methods have been developed to detect intact gluten, but they have shown limitations in certain foods and beverages in which gluten proteins are hydrolyzed. Methods based on G12/A1 moAbs detect the sequences of gluten immunogenic peptides (GIP), which are the main contributors to the immune response of celiac disease (CD). Immunogenic sequences with tandem epitopes for G12/A1 have been found in beers with <20 mg/kg gluten, which could be consumed by CD patients according to the Codex Alimentarius. Therefore, an accurate method for the estimation of the immunogenicity of a beer is to use two moAbs that can recognize celiac T cell epitopes comprising most of the immunogenic response. Here, a specific and sensitive method based on G12/A1 LFIA was developed to detect GIP in beers labeled gluten-free or with low gluten content, with an LOD of 0.5 mg/kg. A total of 107 beers were analyzed, of those 6.5% showed levels higher than 20 mg/kg gluten and 29% showed levels above the LOD. In addition, G12/A1 LFIA detected gluten in 15 more beer samples than competitive ELISA with another antibody. Despite their labeling, these beers contained GIP which may cause symptoms and/or intestinal damage in CD patients. [ABSTRACT FROM AUTHOR]

Wine and beer are the most appreciated and consumed beverages in the world. This success is mainly due to their characteristic taste, smell, and aroma, which can delight consumer's palates. These olfactory characteristics are produced from specific classes of volatile compounds called "volatile odor-active compounds" linked to different factors such as age and production. Given the vast market of drinking beverages, the characterization of these odor compounds is increasingly important. However, the chemical complexity of these beverages has led the scientific community to develop several analytical techniques for extracting and quantifying these molecules. Even though the recent "green-oriented" trend is directed towards direct preparation-free procedures, for some class of analytes a conventional step like derivatization is unavoidable. This review is a snapshot of the most used derivatization strategies developed in the last 15 years for VOAs' determination in wine and beer, the most consumed fermented beverages worldwide and among the most complex ones. A comprehensive overview is provided for every method, whereas pros and cons are critically analyzed and discussed. Emphasis was given to miniaturized methods which are more consistent with the principles of "green analytical chemistry". [ABSTRACT FROM AUTHOR]

During the beer brewing process, some compounds are formed in the primary fermentation step and may affect the final quality of beer. These compounds, called off flavors, such as diacetyl, are produced during fermentation and are related to a buttery taste. The use of acetolactate decarboxylase (ALDC) in the traditional beer brewing process may significantly increase productivity since it allows for a faster decrease in the adverse flavor caused by diacetyl. However, production costs directly impact its application. For this reason, we analyzed the effect of different cultivation media on ALDC production by Bacillus subtilis ICA 56 and process economics. Different carbon and nitrogen sources, including agro-industrial residues, were evaluated. The best result was obtained using sugarcane molasses and corn steep solids (CSS), allowing a 74% reduction in ALDC production cost and an enzyme activity of 4.43 ± 0.12 U·mL−1. The enzymatic extract was then characterized, showing an optimum temperature at 40 °C and stability at different pH levels, being able to maintain more than 80% of its catalytic capacity between pH values of 3.6 and 7.0, with higher enzymatic activity at pH 6.0 (50 mM MES Buffer), reaching an ALDC activity of 5.30 ± 0.06 U·mL−1. [ABSTRACT FROM AUTHOR]

Craft breweries tend to use special raw materials and also special ingredients (spices, herbs, fruits) to typify beers, but the metabolic activities of yeasts play a primary role in defining the sensory characteristics of this beverage. Saccharomyces cerevisiae and Saccharomyces pastorianus are yeast species usually used for ale and lager beer production. The selection and use of new yeast starters with peculiar technological and enzymatic characteristics could represent the key point for the production of beers with good and distinctive organoleptic properties. In this study, the fermentative performance of S. cerevisiae 41CM yeast isolated from the vineyard environment for ale and lager craft beer production on a laboratory scale was evaluated. The commercial yeast S. cerevisiae Fermentis S-04 and S. pastorianus Weihenstephan 34/70 were used as reference strains. S. cerevisiae 41CM showed fermentative kinetics similar to commercial starters, both in lager (12 °C) and ale (20 °C) brewing. In all beers brewed, the largest percentage of volatile compounds synthesized during the fermentation were alcohols, followed by esters, terpenes, and aldehydes. In particular, S. cerevisiae 41CM starter contributed a higher relative percentage of esters in the ale beer than that detected in the lager beer, without ever synthesizing unwanted volatile compounds. [ABSTRACT FROM AUTHOR]

Coffee bean bagasse is one of the main by-products generated by industrial coffee production. This by-product is rich in bioactive compounds such as caffeine, caffeic and chlorogenic acid, and other phenols. The aims of this work are to optimize the extraction conditions of phenolic compounds present in coffee bean bagasse and incorporate them into stout-style craft beers, as well as to determine their effect on the phenol content and antioxidant capacity. The optimal conditions for extraction were 30% ethanol, 30 °C temperature, 17.5 mL of solvent per gram of dry sample, and 30 min of sonication time. These conditions presented a total phenol content of 115.42 ± 1.04 mg GAE/g dry weight (DW), in addition to an antioxidant capacity of 39.64 ± 2.65 μMol TE/g DW in DPPH• and 55.51 ± 6.66 μMol TE/g DW for FRAP. Caffeine, caffeic and chlorogenic acids, and other minor compounds were quantified using HPLC-DAD. The coffee bean bagasse extracts were added to the stout craft beer and increased the concentration of phenolic compounds and antioxidant capacity of the beer. This work is the first report of the use of this by-product added to beers. [ABSTRACT FROM AUTHOR]

The use of wild yeasts, isolated from different environments, is becoming the most interesting option for the production of new beers. The objective of this study is to evaluate the potential of seven non-conventional yeast strains from five different species (Saccharomyces cerevisiae, Hanseniaspora guilliermondii, Metschnikowia pulcherrima, Torulaspora delbrueckii, and Zygosaccharomyces bailii) isolated from Madrid agriculture to produce type ale beer. Wild yeast strains were evaluated at laboratory and pilot plant scales under different fermentation conditions (pure, aerated, and sequential culture). Strain S. cerevisiae SafAle S-04 was used as a reference. Throughout the fermentation of beer, volatile compounds were determined by GC and residual sugars by HPLC, among other parameters. The yeast strains used for the fermentation in pure culture conditions were unable to ferment maltose and maltotriose (0.73–1.18% v/v of ethanol). The results of the study under aerated conditions showed varying levels of higher alcohol and ester concentrations. It should be noted that the strain CLI 1057 (S. cerevisiae) fermented maltose in the presence of oxygen (Kluyver effect). This strain also showed a high production of 4-vinyl guaiacol, making it suitable for producing beers with a phenolic profile. Finally, three strains (H. guilliermondii, Z. bailii, and T. delbrueckii) were evaluated in sequential culture together with commercial strain and found to improve the organoleptic characteristics of the brewed beer. These approaches offer the opportunity to add new product characteristics to the beers. [ABSTRACT FROM AUTHOR]

Rye is used in some applications in the food and beverage industry and for the preparation of functional foods. It is an interesting raw material in malting and brewing due to its characteristic contribution to the beer's color, turbidity, foam and aroma. The aim of this work was to optimize the micro-malting process of a rye landrace. The response surface methodology (RSM) was applied to study the influence of three malting parameters (germination time, germination temperature and degree of steeping) on the quality traits of malted rye. Long germination times at high temperatures resulted in an increase in the extract and Kolbach index. The model for the apparent attenuation limit showed a particular pattern, whereby time and temperature inversely influenced the response. The lowest viscosities were determined in the worts produced from highly modified malts. Optimization of the variables under study was achieved by means of a desirability function and a genetic algorithm. The two methodologies provided similar results. The best combination of parameters to optimize the malting process on the rye landrace under study was achieved at 6 days, 12 °C and 44 g/100 g. [ABSTRACT FROM AUTHOR]

Hop (Humulus lupulus L.) is a plant used as an ingredient in beer or employed for its anti-inflammatory properties. The cultivation of hops is currently dedicated to the brewing industry, where mainly female flowers are used, whereas aerial parts, such as leaves, are considered coproducts. Osteoarthritis is the most common musculoskeletal disease associated with low-grade cartilage inflammation. Liposomes have been shown to be promising systems for drug delivery to cartilage cells, called chondrocytes. The aim of our work was to vectorize hop extract valorized from coproducts as a therapeutic agent to alleviate inflammation in human chondrocytes in vitro. Liquid chromatography allowed the identification of oxidized bitter acids in a methanolic extract obtained from the leaves of Cascade hops. The extract was encapsulated in rapeseed lecithin nanoliposomes, and the physicochemical properties of empty or loaded nanoliposomes exhibited no difference. Increasing concentrations of the hop extract alone, empty nanoliposomes, and loaded nanoliposomes were tested on human chondrocytes to assess biocompatibility. The appropriate conditions were applied to chondrocytes stimulated with interleukin-1β to evaluate their effect on inflammation. The results reveal that encapsulation potentiates the hop extract anti-inflammatory effect and that it might be able to improve joint inflammation in osteoarthritis. Furthermore, these results also show that a "zero waste" chain is something that can be achieved in hop cultivation. [ABSTRACT FROM AUTHOR]

One of the ingredients used for brewing is barley, which should be malted; it is considered the most polluting agricultural input. On the other hand, food wastage is today a widespread problem that causes significant environmental damage and also generates large economic losses worldwide. One of the most wasted food products is bread; it is estimated that hundreds of tons of bread are wasted every day worldwide. In this study, the brewing of ale beers with bread was carried out. For this purpose, up to 50% of the malt weight was replaced by different types of bread: wheat bread, whole wheat bread, rye bread, and corn bread. A physicochemical and sensory comparison was made with 100% malt ale beer. All beers brewed with bread had an alcoholic strength similar to that of the control beer, except the corn beer. Beers brewed with whole grain bread showed a higher antioxidant capacity and a higher total polyphenol content. The sensory analysis presented different profiles depending on the type of bread; in general, the addition of bread created a greater olfactory intensity in nose. Thus, it was found that it is possible to brew beer with bread substituting up to 50% of the malt. In addition, it was also shown that the beer brewed with whole wheat bread had similar characteristics to the control beer, even improving some beneficial health properties, representing a great advantage for the brewing industry all over the world. [ABSTRACT FROM AUTHOR]

The biotransformation of hop aroma, particularly by the cysteine S-conjugate beta-lyase enzyme (CSL), has been a recent topic of tremendous interest among brewing scientists and within the brewing community. During a process often referred to as biotransformation, yeast-encoded enzymes convert flavorless precursor molecules found in barley and hops into volatile thiols that impart a variety of desirable flavors and aromas in beer. Two volatile thiols of particular interest are 3-mercaptohexan-1-ol (3MH) and its acetate ester, 3-mercaptohexyl acetate (3MHA), which impart guava and passionfruit flavors, respectively. In this study, a parental Saccharomyces cerevisiae brewing strain that displayed low thiol biotransformation activity was genetically manipulated (GM) to substantially increase its thiol biotransformation potential. Construction of this GM strain involved integration of a gene encoding a highly active CSL enzyme that converts thiol precursors into the volatile thiol, 3MH. Three additional strains were subsequently developed, each of which paired CSL expression with expression of an alcohol acyltransferase (AAT) gene. It was hypothesized that expression of an AAT in conjunction with CSL would increase production of 3MHA. Fermentation performance, sensory characteristics, and 3MH/3MHA production were evaluated for these four GM strains and their non-GM parent in 1.5hL fermentations using 100% barley malt wort hopped at low levels with Cascade hops. No significant deviations in fermentation performance (time to attenuation, final gravity, alcohol content, wort fermentability) or finished beer chemistry were observed between the GM strains and the parent strain with the exception of the speed of vicinal diketones reduction post-fermentation, which was quicker for the GM strains. The GM strains produced beer that had up to 73-fold and 8-fold higher 3MH and 3MHA concentrations than the parent strain, achieving concentrations that were up to 79-fold greater than their sensory detection thresholds. The beers were described as intensely tropical and fruity, and were associated with guava, passionfruit, mango, pineapple and sweaty aromas. These experiments demonstrate the potential of genetic modification to dramatically enhance yeast biotransformation ability without creating off flavors or affecting fermentation performance. [ABSTRACT FROM AUTHOR]

The Volatile Organic Compounds (VOCs) of common wheat of different origin (variety and altitude of cultivation) and craft wheat beers produced by using the wheat themselves were analyzed by SPME GC-MS. The VOCs of wheat kernels and wheat beers were compared, and 14 common flavor-active compounds were identified. Principal component analysis was used to describe changes in the profile of common volatiles induced by beer processing. A unifying approach by Generalized Procrustes analysis (GPA), which considers the overall characteristics of the datasets, permitted linking the VOCs of wheat to those of beers and to define a common flavor pattern. Despite the beer processing deeply affecting the overall volatilome profile, a consensus map permitted to clearly classify the VOCs profile of five out of six samples. This work revealed that differences in wheat VOCs induced by wheat variety and cultivation site were reflected in different beer aromatic profiles, highlighting the importance of origin on the wheat and beers' flavor. This unifying approach to flavor analysis by GPA could be of help in sight of a certification of origin, since it may contribute not only to the definition of wheat origin but also of the "terroir" of wheat beer thereof. [ABSTRACT FROM AUTHOR]

Research into the suitability of domestic raw materials, including, for example, new wheat cultivars and fruit additives for the production of flavoured beers, is increasingly being undertaken by minibreweries and craft breweries. The fruits of the Saskatoon berry are an important source of bioactive compounds, mainly polyphenols, but also macro- and microelements. The fruits of two Canadian cultivars of this species, 'Honeywood' and 'Thiessen', were used in this study. Physicochemical analysis showed that wheat beers with the addition of non-ozonated fruit were characterised by a higher ethanol content by 7.73% on average. On the other hand, enrichment of the beer product with fruit pulp obtained from the cv. 'Thiessen' had a positive effect on the degree of real attenuation and the polyphenol profile. Sensory evaluation of the beer product showed that wheat beers with the addition of 'Honeywood' fruit were characterised by the most balanced taste and aroma. On the basis of the conducted research, it can be concluded that fruits of both cvs. 'Honeywood' and 'Thiessen' can be used in the production of wheat beers, but the fermentation process has to be modified in order to obtain a higher yield of the fruit beer product. [ABSTRACT FROM AUTHOR]

The use of non-Saccharomyces yeasts in brewing is a useful tool for developing new products to meet the growing consumer demand for innovative products. Non-Saccharomyces yeasts can be used both in single and in mixed fermentations with Saccharomyces cerevisiae, as they are able to improve the sensory profile of beers, and they can be used to obtain functional beers (with a low ethanol content and melatonin production). The aim of this study was to evaluate this capacity in eight non-Saccharomyces strains isolated from Madrid agriculture. For this purpose, single fermentations were carried out with non-Saccharomyces strains and sequential fermentations with non-Saccharomyces and the commercial strain SafAle S-04. The Wickerhamomyces anomalus strain CLI 1028 was selected in pure culture for brewing beer with a low ethanol content (1.25% (v/v)) for its fruity and phenolic flavours and the absence of wort flavours. The best-evaluated strains in sequential fermentation were CLI 3 (Hanseniaspora vineae) and CLI 457 (Metschnikowia pulcherrima), due to their fruity notes as well as their superior bitterness, body, and balance. Volatile compounds and melatonin production were analysed by GC and HPLC, respectively. The beers were sensory-analysed by a trained panel. The results of the study show the potential of non-Saccharomyces strains in the production of low-alcohol beers, and as a flavour enhancement in sequential fermentation. [ABSTRACT FROM AUTHOR]

Hops are widespread as a wild plant in almost all Northern and Central Italy, and the characterization of wild populations is attracting considerable interest in verifying their potential use. The development of hops as agricultural crop can be an interesting opportunity, both for farms that would have available a new crop to be included in the crop system and for craft breweries interested in characterizing beers with local raw materials. In the present work, 14 wild hop accessions coming from various Italian locations were characterized and compared with 2 commercial varieties (Cascade and Hallertau Taurus) grown in the same environments. The cones were analyzed to measure the content of α- and β-acids, polyphenols, flavonoids, and the anti-radical power. The α-acid content of wild hops was generally low, while the β-acid content was very variable and quite high in some samples. The content in polyphenols and flavonoids and the antiradical power were high and generally similar to those of the commercial varieties. Therefore, the analyzed genotypes are not very suitable for use as bitter hops in beer production, while further analysis may indicate a possible use as aroma hops, or for herbal and pharmaceutical purposes, thanks to their antioxidant content. [ABSTRACT FROM AUTHOR]

Microalgal biomass is widely studied for its possible application in food and human nutrition due to its multiple potential health benefits, and to address raising sustainability concerns. An interesting field whereby to further explore the application of microalgae is that of beer brewing, due to the capacity of some species to accumulate large amounts of starch under specific growth conditions. The marine species Tetraselmis chui is a well-known starch producer, and was selected in this study for the production of biomass to be explored as an active ingredient in beer brewing. Cultivation was performed under nitrogen deprivation in 250 L tubular photobioreactors, producing a biomass containing 50% starch. The properties of high-starch microalgal biomass in a traditional mashing process were then assessed to identify critical steps and challenges, test the efficiency of fermentable sugar release, and develop a protocol for small-scale brewing trials. Finally, T. chui was successfully integrated at a small scale into the brewing process as an active ingredient, producing microalgae-enriched beer containing up to 20% algal biomass. The addition of microalgae had a noticeable effect on the beer properties, resulting in a product with distinct sensory properties. Regulation of pH proved to be a key parameter in the process. [ABSTRACT FROM AUTHOR]

The hop plant is seasonal, but beer production continues throughout the whole year. The quality of hops begins to decrease immediately after harvesting; therefore, maintaining the highest possible quality is important. A good indicator of hop freshness is the hop storage index (HSI). In this study, three different varieties of hops with five different HSI values, from 0.3 to 0.7, were used for brewing with the dry hopping technique. The main goal was to evaluate the impact of the HSI value on beer quality in terms of hop aroma and bitterness. Alpha acids, iso-alpha acids, humulinones, bitterness units and hop aroma compounds were chemically analysed. Sensorial analysis was also conducted on all samples. Decreases in the intensity and quality of hop aroma were detected with increasing HSI. The quality of bitterness was also reduced. High HSI also led to undesirable gushing. Beers brewed with hops with HSI values greater than 0.4 had deviations in aroma and bitterness when compared with beers brewed with fresh hops. [ABSTRACT FROM AUTHOR]

Brazil is one of the three largest beer producers in the world. Four basic ingredients are needed as raw material for the production of beer: water, malt, yeast, and hops (Humulus lupulus L.). Until recently, almost all of the hops in Brazil were imported from other countries. However, in the last decade, hop cultivation in Brazil has emerged due to the increase in the number of new craft breweries, which have demanded diversified raw material for the production of various types of beer. Hops is considered a short-day, temperate species, so the major challenge for the development of hop cultivation in Brazil, with high-yield capacity and with local typicity of bitterness and aroma, is the adaptation of cultivars to the photoperiod conditions in subtropical regions. This review addresses the history of hop cultivation in Brazil and characterizes the main climatic elements of three emerging subtropical growing regions located at different latitudes, such as air temperature, photoperiod, solar radiation, and water availability, to provide support for the development of new technologies for hop cultivation, including supplemental lighting, irrigation, and mulching. [ABSTRACT FROM AUTHOR]