Search

In this paper, for the sake of enhancing the security of wireless transmission, we proposed a novel system based on spatial and direction modulation (SDM) combined with generalized spatial modulation (GSM) which is aided by covert information mapping (CIM), termed as the CIM-GSDM system. In such a system, the legitimated user is equipped with distributed receivers so as to demodulate the conveyed signal by exploiting its indices while disturbing eavesdroppers for information security. More specifically, part of the information is modulated into the indices of the legitimated distributed receiver subsets with the aid of the mapped covert information and the interference matrix, while another part of the message is arranged by conventional amplitude-phase modulation. The proposed system can reap the benefits from both GSM and CIM to make eavesdropper suffer great mixture. Furthermore, the detection scheme and theoretical analysis of error performance are discussed as well. The simulation results exhibit that the bit error rate (BER) performance of legitimate user is much better than that of the eavesdropper while the proposed scheme improves the security compared to the original CIM-SDM system at the same spectral efficiency. [ABSTRACT FROM AUTHOR]

Intelligent Reflecting Surfaces (IRS) and Multiple-Input Single-Output (MISO) technologies are essential in the fifth generation (5G) networks and beyond. IRS optimizes the signal propagation and the coverage and is a viable approach to address the issues caused by fading channels that limits the spectral efficiency, while MIMO enhances data rates, reliability, and spectral efficiency by using multiple antennas at both transmitter and receiver ends. This paper proposes an IRS-assisted MISO system using the Orthogonal Space-Time Block Code (OSTBC) scheme to enhance the channel reliability and reduce the Bit Error Rate (BER) in wireless communication systems. The proposed system exploits the benefits from the transmit diversity gain of the OSTBC scheme as well as from the bit energy to noise power spectral density (Eb/No) improvement of the IRS technology. The presented work explores these combined technologies across different modulation schemes. The obtained results outperform the similar previously published works by considering higher-order modulation schemes as well as the deployment of rate ¾ OSTBC-assisted IRS. Moreover, the obtained results demonstrate that the integration of OSTBC with IRS can yield significant performance improvements in terms of Eb/No by 7 dB and 13 dB when using 16 reflecting elements and 64 reflecting elements, respectively. [ABSTRACT FROM AUTHOR]

Most of Optical Camera Communication (OCC) systems benefit from the rolling shutter mechanism of Complementary Metal-Oxide Semiconductor (CMOS) cameras to record the brightness evolution of the Light-Emitting Diode (LED) through dark and bright strips within images. While this technique enhances the maximum achievable data rate, the main difficulty lies in the demodulation of the signal extracted from images, subject to blooming effect. Thus, two main approaches were proposed to deal with this issue, using adaptive thresholds whose value evolves according to amplitude changes or detecting signal variations with the first-order derivative. As the second method is more robust, a new demodulation method based on the detection of the zeros of the first-order derivative of the extracted signal was proposed in this paper. Obtained results clearly show an improvement in the extracted signal demodulation compared to other methods, achieving a raw Bit Error Rate (BER) of 10−3 around 50 cm in a Line-Of-Sight scenario, and increasing the maximum communication distance by 43.5%, reaching 330 cm in the case of a Non-Line-Of-Sight transmission. [ABSTRACT FROM AUTHOR]

In addressing the multifaceted problem of multiple-input multiple-output (MIMO) detection in wireless communication systems, this work highlights the pressing need for enhanced detection reliability under variable channel conditions and MIMO antenna configurations. We propose a novel method that sets a new standard for deep unfolding in MIMO detection by integrating the iterative conjugate gradient method with Tikhonov regularization, combining the adaptability of modern deep learning techniques with the robustness of classical regularization. Unlike conventional techniques, our strategy treats the Tikhonov regularization parameter, as well as the step size and search direction coefficients of the conjugate gradient (CG) method, as trainable parameters within the deep learning framework. This enables dynamic adjustments based on varying channel conditions and MIMO antenna configurations. Detection performance is significantly improved by the proposed approach across a range of MIMO configurations and channel conditions, consistently achieving lower bit error rate (BER) and normalized minimum mean square error (NMSE) compared to well-known techniques like DetNet and CG. The proposed method has superior performance over CG and other model-based methods, especially with a small number of iterations. Consequently, the simulation results demonstrate the flexibility of the proposed approach, making it a viable choice for MIMO systems with a range of antenna configurations, modulation orders, and different channel conditions. [ABSTRACT FROM AUTHOR]

Underwater wireless optical communication (UWOC) systems face challenges due to the significant temporal dispersion caused by the combined effects of scattering, absorption, refractive index variations, optical turbulence, and bio-optical properties. This collective impairment leads to signal distortion and degrades the optical receiver's bit error rate (BER). Optimising the receiver filter and equaliser design is crucial to enhance receiver performance. However, having an optimal design may not be sufficient to ensure that the receiver decision unit can estimate BER quickly and accurately. This study introduces a novel BER estimation strategy based on a Convolutional Neural Network (CNN) to improve the accuracy and speed of BER estimation performed by the decision unit's computational processor compared to traditional methods. Our new CNN algorithm utilises the eye diagram (ED) image processing technique. Despite the incomplete definition of the UWOC channel impulse response (CIR), the CNN model is trained to address the nonlinearity of seawater channels under varying noise conditions and increase the reliability of a given UWOC system. The results demonstrate that our CNN-based BER estimation strategy accurately predicts the corresponding signal-to-noise ratio (SNR) and enables reliable BER estimation. [ABSTRACT FROM AUTHOR]

In this paper, new schemes have been proposed for the estimation of the additive white Gaussian noise (AWGN) channel with intersymbol interference (ISI) in an iterative equalization and decoding system using low-density parity check (LDPC) codes. This article explores the use of the least squares algorithm in various scenarios. For example, the impulse response of the AWGN channel h was initially estimated using a training sequence. Subsequently, the impulse response was calculated based on the training sequence and then re-estimated once using the sequence estimated from the output of the LDPC decoder. Lastly, the impulse response was calculated based on the training sequence and re-estimated twice using the sequence estimated from the output of the LDPC decoder. Comparisons were made between the performances of the three mentioned situations, with the situation in which a perfect estimate of the impulse response of the channel is assumed. The performance analysis focused on how the bit error rate changes in relation to the signal-to-noise ratio. The BER performance comes close to the scenario of having a perfect estimate of the impulse response when the estimation is performed based on the training sequence and then re-estimated twice from the sequence obtained from the output of the LDPC decoder. [ABSTRACT FROM AUTHOR]

In the ever-evolving landscape of modern technology, integrating communication and sensing systems has become increasingly essential for a wide range of applications, from military and defense to autonomous vehicles and beyond. The integration offers a convergence of capabilities that enhances operational efficiency and provides adaptability in complex environments. In this paper, we develop, in simulation and experiment, an integrated communication and sensing system, exploring the cutting-edge utilization of spread spectrum and radio-over-fiber (RoF) photonic technologies. RoF technology inherits the benefits of optical fibers, which include low attenuation and longer reach distance compared to other media. First, we consider the integration of communication and sensing functions using a spread spectrum–binary phase-shift keying waveform. In this integrated system, the sensing function is performed using a radar system. The performance of the proposed system is evaluated in terms of the peak-to-sidelobe ratio of the radar correlator output and the bit error rate for the communication system. The results are obtained through extensive MATLAB simulations. Next, we consider the realization of the proposed integrated communication and sensing system using photonics technology. This phase commences with the utilization of specialized photonics-based software for extensive simulations at different fiber lengths, which is an essential foundational step toward the practical implementation of the proposed system using photonics. Lab experiments are also presented to validate the simulation results. [ABSTRACT FROM AUTHOR]

Free-space optical (FSO) communication has received widespread attention as a high-bandwidth, low-latency communication technique. However, the scintillation effect caused by atmospheric turbulence leads to intensity fluctuations of the transmission signal, which, in turn, affects the performance of the FSO communication system. This paper proposes a channel correlation-based adaptive power transmission for FSO communications. Based on the correlation between uplink and downlink turbulence channels, the power of the reverse transmission signal is adjusted by the fluctuation strength of the received uplink or downlink transmission signal and the channel correlation coefficient to improve the system's performance. The proposed technique is investigated through a simulation using established uplink and downlink channels with different link distances and turbulence intensities. The simulation results show that the bit error rate (BER) performance of the proposed technique is significantly improved compared to the fixed threshold decision (FTD) technique, and it is close to the adaptive threshold decision (ATD) technique. The proposed technique provides an effective optimization scheme for FSO communications. [ABSTRACT FROM AUTHOR]

The intelligent reflecting surface (IRS) is an emerging technology that can conquer visible light communication's (VLC) dependency on the line-of-sight (LoS) channel by offering additional non-light-of-sight (NLoS) communication links. In this paper, a newly proposed electro-tunable intelligent reflecting metasurface is deployed in dimmable single-input single-output (SISO) VLC systems. We aim to improve the bit error rate (BER) performance by jointly optimizing the transmit constellation and the reflectance of the IRS units. To this end, the optimization problem can be solved in two steps. The minimum distance of the received constellation is firstly maximized by a convex problem, which guarantees the minimum BER. Then, the transmit constellation and the synchronously-tunable reflectance of the IRS units that correspond to the optimal received constellation are determined with an iterative alternate optimization algorithm. Finally, the simulation results show the BER performance improvement and the dimming relaxation benefit of the tunable IRS-aided SISO VLC systems. [ABSTRACT FROM AUTHOR]

Underwater optical wireless communication (UOWC) systems provide the potential to establish secure high-data-rate communication links in underwater environments. The uniqueness of oceanic impairments, such as absorption, scattering, oceanic turbulence, and air bubbles demands accurate statistical channel models based on empirical measurements for the development of UOWC systems adapted to different types of water and link conditions. Recently, generalized Gamma and a mixture of two generalized Gamma probability density functions (PDF) were proposed to describe the statistical behavior of small and large air bubbles, respectively, when considering several levels of particle-induced scattering. In this paper, we derive novel closed-form analytic expressions to compute the bit error rate (BER) and outage performance using both proposed PDFs for various scattering conditions. Furthermore, simple asymptotic expressions are obtained to determine the diversity order of each scenario. Monte Carlo simulation results verify the obtained theoretical expressions. Our results also reveal that UOWC systems present lower BER and outage performance under more turbid water cases with respect to the tap water case due to the higher diversity order and despite the significant increases in pathloss at short link distances. Particle-induced scattering provides an inherent mechanism of turbid waters to mitigate air bubble-induced fluctuations and light blockages. [ABSTRACT FROM AUTHOR]

With the increasing demand for marine biosensing and water–air collaborative rescue in national production and life, establishing a robust cross-medium communication link has become one of the hotspots. Among them, microwave acoustic cross-medium uplink communication technology has been widely studied for its advantages of being able to be used all day and in all weather, there being no need for relay, and having high concealment. The principle is to extract the frequency of the acoustic water surface waves from the phase history of the radar echoes. However, wave interference can cause discontinuity of the phase history, resulting in difficulty in extracting the acoustic water surface waves and an increase in bit error rate (BER). This article analyses the reasons for the discontinuity of phase history and innovatively proposes a method for extracting acoustic water surface waves based on phase compensation. The discontinuity points of the phase history are compensated based on whether the range bin changes. Then, low-frequency water surface fluctuations and discontinuity points are filtered out through second-order differential joint outlier removal, which can effectively reduce the influence of phase history discontinuity on time–frequency analysis and communication decoding. The effectiveness of the proposed method was verified through simulations and experiments. The experimental results indicate that the BER of the proposed method is 25% of that of the Wavelet–Kalman Filtering method. The proposed method provides a new approach for microwave acoustic cross-medium uplink communication. [ABSTRACT FROM AUTHOR]

Signal detection is crucial in multi-input multi-output orthogonal frequency division multiplexing (MIMO-OFDM) systems, yet classical detection methods often struggle with nonlinear issues in wireless channels. To handle this challenge, we propose a novel signal detection method for MIMO-OFDM system based on the fractional Fourier transform (FrFT), leveraging the robust time series processing capabilities of long short-term memory (LSTM) networks. Our innovative approach, termed IM-LSTMNet, integrates LSTM with convolutional neural networks (CNNs) and incorporates a Squeeze and Excitation Network to emphasize critical information, enhancing neural network performance. The proposed IM-LSTMNet is applied to the FrFT-based MIMO-OFDM system to improve signal detection performance. We compare the detection results of IM-LSTMNet with zero forcing (ZF), minimum mean square error (MMSE), simple LSTM neural network, and CNN–LSTM network by evaluating the bit error rate. Experimental results demonstrate that IM-LSTMNet outperforms ZF, MMSE, LSTM, and other methods, significantly enhancing system signal detection performance. This work offers a promising advancement in MIMO-OFDM signal detection, presenting a deep learning-based solution that effectively improves the system signal detection performance. [ABSTRACT FROM AUTHOR]

The bit error rate (BER) in relation to the signal-to-noise ratio (SNR) serves as a widely recognized metric for assessing the performance of communication systems. The concept of SNR is so integral that many existing studies presume its definition to be understood, often omitting the specifics of its calculation in their simulations. Notably, the computation of SNR from the perspective of the transmitter yields distinct behaviors and outcomes compared to that from the receiver's side, particularly when the channel encompasses more than mere noise. Typically, research papers utilize the transmitter-side (or ensemble-average) SNR to benchmark the BER performance across various methodologies. Conversely, the receiver-side (or short-term) SNR becomes pertinent when prioritizing the receiver's performance. In the context of simulating the long-term evolution (LTE) downlink, applying both SNR calculation approaches reveals that the receiver-side SNR not only produces a significantly lower BER compared to the transmitter-side SNR but also alters the relative BER performance rankings among the channel models tested. It is deduced that while the transmitter-side SNR is apt for broad performance comparisons, it falls short in thoroughly examining the BER behavior of a receiver across varying SNR scenarios. Therefore, the transmitter-side SNR is useful when comparing the performance of the simulated system with other studies. Conversely, if the primary concern is the actual BER performance of the receiver, the receiver-side SNR could provide a more accurate performance assessment. [ABSTRACT FROM AUTHOR]

One of the key advantages of terahertz (THz) communication is its potential for energy efficiency, making it an attractive option for green communication systems. Coherent THz transmission technology has recently been explored in the literature. However, there exist few error performance results for such a wireless link employing coherent THz technology. In this paper, we explore a comprehensive terrestrial channel model designed for wireless line-of-sight communication using THz frequencies. The performance of coherent THz links is analyzed, and it is found to be notably affected by two significant factors, atmospheric turbulence and pointing errors. These could occur between the terahertz transmitter and receiver in terrestrial links. The exact and asymptotic solutions are derived for bit error rate and interrupt probability for binary phase-shift keying coherent THz systems, respectively, over log-normal and Gamma–Gamma turbulent channels. The asymptotic outage probability analysis is also performed. It is shown that the presented results offer a precise estimation of coherent THz transmission performance and its link budget. [ABSTRACT FROM AUTHOR]

This novel research introduces a game-changing architecture design for Quasi-Cyclic Low-Density Parity-Check (QC-LDPC) decoders in Fifth-Generation New-Radio (5G-NR) wireless communications, specifically designed to meet precise specifications and leveraging the layered Min-Sum (MS) algorithm. Our innovative approach presents a fully parallel architecture that is precisely engineered to cater to the demanding high-throughput requirements of enhanced Mobile Broadband (eMBB) applications. To ensure smooth computation in the MS algorithm, we use the Sub-Optimal Low-Latency (SOLL) technique to optimize the critical check node process. Thus, our design has the potential to greatly benefit certain Ultra-Reliable Low-Latency Communications (URLLC) scenarios. We conducted precise Bit Error Rate (BER) performance analysis on our LDPC decoder using a Hardware Description Language (HDL) Co-Simulation (MATLAB/Simulink/ModelSim) for two codeword rates (2/3 and 1/3), simulating the challenging Additive White Gaussian Noise (AWGN) channel environment. [ABSTRACT FROM AUTHOR]

Due to the low-complexity implementation, direction-of-arrival (DOA) estimation-based one-bit quantized data are of interest, but also, signal processing struggles to obtain the demanded estimation accuracy. In this study, we injected a number of noise components into the receiving data before the uniform linear array (ULA) composed of one-bit quantizers. Then, based on this designed noise-boosted quantizer unit (NBQU), we propose an efficient one-bit multiple signal classification (MUSIC) method for estimating the DOA. Benefiting from the injected noise, the numerical results show that the proposed NBQU-based MUSIC method outperforms existing one-bit MUSIC methods in terms of estimation accuracy and resolution. Furthermore, with the optimal root mean square (RMS) of the injected noise, the estimation accuracy of the proposed method for estimating DOA can approach that of the MUSIC method based on the complete analog data. [ABSTRACT FROM AUTHOR]

We present a novel photon-acid diffusion method to integrate polymer microlenses (MLs) on a four-channel, high-speed photo-receiver consisting of normal-incidence germanium (Ge) p-i-n photodiodes (PDs) fabricated on a 200 mm Si substrate. For a 29 µm diameter PD capped with a 54 µm diameter ML, its dark current, responsivity, 3 dB bandwidth (BW), and effective aperture size at −3 V bias and 850 nm wavelength are measured to be 138 nA, 0.6 A/W, 21.4 GHz, and 54 µm, respectively. The enlarged aperture size significantly decouples the tradeoff between aperture size and BW and enhances the optical fiber misalignment tolerance from ±5 µm to ±15 µm to ease the module packaging precision. The sensitivity of the photo-receiver is measured to be −9.2 dBm at 25.78 Gb/s with a bit error rate of 10−12 using non-return-to-zero (NRZ) transmission. Reliability tests are performed, and the results show that the fabricated Ge PDs integrated with polymer MLs pass the GR-468 reliability assurance standard. The demonstrated photo-receiver, a first of its kind to the best of our knowledge, features decent performance, high yield, high throughput, low cost, and compatibility with complementary metal-oxide-semiconductor (CMOS) fabrication processes, and may be further applied to 400 Gb/s pulse-amplitude modulation four-level (PAM4) communication. [ABSTRACT FROM AUTHOR]

In order to meet the increasing requirements of speed and distance, an advanced digital signal processing (DSP) algorithm is preferred without changing the system structure in intensity modulation and the direct detection (IM/DD) system. As the transmission distance increases, the power fading induced by dispersion must be mitigated. In addition, linear and nonlinear inter symbol interference (ISI) introduced by bandwidth limitation and device imperfections becomes an obstacle to achieving higher capacity. The Gerchberg–Saxton (GS) algorithm was recently used to compensate for dispersion. In this paper, GS-based pre- and post-compensation schemes in the IM/DD system with nonlinearity were investigated. We investigated and compared the performance of the GS-based pre- and post-compensation algorithm in a 28 GB aud four-level pulse amplitude modulation (PAM-4) transmission over 40 km standard single-mode fiber (SSMF). The bit error rate (BER) achieved a threshold of 3.8 × 10−3 using look-up-table (LUT), FFE, and the GS-based pre-compensation algorithm without iterations. Turning to the GS-based post-compensation scheme, 80 iterations are needed. However, the demand for FFE is reduced. The algorithm selection depends on the tolerance of the transmitter or receiver complexity in specific scenarios. The joint LUT and GS-based pre-compensation algorithm may be a preferable approach in scenarios where a low-complexity receiver is desired. [ABSTRACT FROM AUTHOR]

In this paper, a novel ultraviolet (UV) scatter communication scheme is presented, designed to dynamically adjust the signal duty cycle to optimize on–off keying (OOK) modulation and reduce the bit error rate (BER), particularly under varying rate settings. This approach addresses the significant challenge posed by LED tailing effects, which cause signal fluctuations and increase BER in high-speed communications. This BER suppression scheme is proposed for the first time in UV communication research, enhancing communication performance without the need for additional hardware or complex algorithms. A UV communication model that incorporates both path loss and LED tailing effects is introduced, with the probability density function of the signal from transmitter to receiver derived. By varying the signal duty cycle, tailing-induced BER is effectively minimized. Additionally, a closed-form expression for signal transmission BER using a single-scattering model is provided, and the proposed UV communication system is validated through comprehensive simulations and experimental tests. The results indicate that LED tailing has a pronounced impact on BER at higher communication speeds, while its effects are less significant at lower speeds. By optimizing the duty cycle parameters for various communication rates, findings demonstrate that lower duty cycle settings significantly reduce the BER at higher speeds. This further demonstrates the excellent performance of the proposed UV communication solution for OOK-modulated optical communication. [ABSTRACT FROM AUTHOR]

We propose a novel reception scheme for twin single-sideband (twin-SSB) signals using just a single photodetector (PD), significantly reducing the system complexity and cost. To detect a twin-SSB with power-unbalanced quadrature-phase shift keying (QPSK) sidebands upon detection via a single PD at the receiver side, two QPSKs carried in two sidebands are coherently superposed and detected in a 16-ary quadrature amplitude modulation (16-QAM) format. This technique notably diminishes the linearity and effective number of bits required for the transmitter components in high-speed optical transmission systems. Moreover, a hierarchical blind-phase search (HBPS) algorithm is proposed to compensate for the imperfect phase rotation of QPSK signals during transmission. To demonstrate the effectiveness of our proposed method, we successfully conducted simulations of 112 Gb/s 16-QAM signal transmission over a 10 km standard single-mode fiber (SSMF), achieving bit error ratios (BERs) of 7.84 × 10 − 4 , well below the 7% hard-decision forward error correction (HD-FEC) threshold of 3.8 × 10 − 3 . In addition, the synthetic transmission scheme proposed in this paper is compared with the traditional 16-QAM signal transmission scheme, and the results show that the proposed scheme does not introduce a performance cost with the same received optical power (ROP) and transmission distance. [ABSTRACT FROM AUTHOR]

This paper presents an analytical study of signal clipping that leads to the noise/distortion in the waveform of DC-biased optical orthogonal frequency division multiplexing (DCO-OFDM)-based visible light communication (VLC) systems. The pilot-assisted (PA) technique is used to reduce the high peak-to-average power ratio (PAPR) of the time-domain waveform of the DCO-OFDM system. The bit error rate (BER) performance of the PA DCO-OFDM system is investigated analytically at three different clipping levels as well as without any clipping. The analytical BER performance is verified through simulation and then compared to that of the conventional DCO-OFDM without PAPR reduction at the selected clipping levels. The PA DCO-OFDM system shows improved BER performance at all three clipping levels. [ABSTRACT FROM AUTHOR]

This paper advocates for spatial simultaneous functioning (SSF) over time division multiple access (TDMA) in joint communication and sensing (JCAS) scenarios for improved resource utilization and reduced interference. SSF enables the concurrent operation of communication and sensing systems, enhancing flexibility and efficiency, especially in dynamic environments. The study introduces joint design communication and sensing scenarios for single input single output (SISO) and multiple input multiple output (MIMO) JCAS receivers. An MIMO-JCAS base station (BS) is proposed to process downlink communication signals and echo signals from targets simultaneously using interference cancellation techniques. We evaluate the communication performance and sensing estimation across both Rayleigh and measured realistic channels. Additionally, a deep neural network (DNN)-based approach for channel estimation and signal detection in JCAS systems is presented. The DNN outperforms the traditional methods in the bit error rate (BER) versus signal-to-noise ratio (SNR) curves, leveraging its ability to learn complex patterns autonomously. The DNN's training process fine-tunes the performance based on specific problem characteristics, capturing the nuanced relationships within data and adapting to varying SNR conditions for consistently superior performance compared to the traditional approaches. [ABSTRACT FROM AUTHOR]

Sixth-generation (6G) wireless networks demand a more efficient implementation of non-orthogonal multiple access (NOMA) schemes for severe multipath fading environments to serve multiple users. Using non-orthogonal multiple access (NOMA) schemes in IoT 6G networks is a promising solution to allow multiple users to share the same spectral and temporal resource, increasing spectral efficiency and improving the network's capacity. In this work, we have evaluated the performance of a novel progressive pattern interleaver (PPI) employed to distinguish the users in interleaved division multiple access (IDMA) schemes, suggested by 3GPP guidelines as a NOMA scheme, with two multi-carrier modulation schemes known as single-carrier frequency-division multiple access (SC-FDMA) and orthogonal frequency-division multiplexing (OFDM), resulting in SC-FDMA-IDMA and OFDM-IDMA schemes. Both schemes are multi-carrier schemes with orthogonal sub-carriers to deal against inter-symbol interference (ISI) and orthogonal interleavers for the simultaneous access of multiple users. It has been suggested through simulation outcomes that PPI performance is adequate with SC-FDMA-IDMA and OFDM-IDMA schemes in terms of bit error rate (BER) under multipath channel conditions. Moreover, regarding bandwidth requirement and the implementation complexity of the transmitted interleaver structure, PPI is superior to the conventional random interleaver (RI). [ABSTRACT FROM AUTHOR]

Although RFID(radio frequency identification) tags do not require a direct line of sight, their operational range is often characterized as being limited. Indeed, in the case of passive RFID tags, the interrogating signal from the transmitter needs to reach the tag's radio transponder and trigger a nearly omnidirectional scattered signal to be harvested by the receiver. This two-way (from Tx to the tag and back to Rx) channel exhibits increased attenuation not only due to the doubled distance (in case Tx and Rx are collocated) but also to the uncontrolled (i.e., unfocused) backscattering. In the work at hand, we propose a way to control the backscattered radiation and focus the produced beam towards the direction of the reader (the Tx-Rx device). Indeed, one can utilize the concept of retrodirective arrays to immediately control the direction of departure of the backscatter link, maximizing the scattered power towards the reader and thus delivering an increase in the operational range of the tag. This of course means that in this case, the tag should be equipped with a minimum of two element radiators. Thus, retrodirective RFID array tags are introduced in the current work to increase the operating range with minimal costs and levels of complexity since 90° hybrids are used to achieve proper backscattering. To evaluate the proposed passive tag array, performance aspects are addressed. Specifically, we examine the Bit Error Rate with respect to the Signal to Noise Ratio for the retrodirective tag, the one antenna, the broadside, and the spatial diversity array. The results prove that the proposed tag allows for a significant increase in the operational range. [ABSTRACT FROM AUTHOR]

We propose a neural-network-based watermarking method that introduces the quantized activation function that approximates the quantization of JPEG compression. Many neural-network-based watermarking methods have been proposed. Conventional methods have acquired robustness against various attacks by introducing an attack simulation layer between the embedding network and the extraction network. The quantization process of JPEG compression is replaced by the noise addition process in the attack layer of conventional methods. In this paper, we propose a quantized activation function that can simulate the JPEG quantization standard as it is in order to improve the robustness against the JPEG compression. Our quantized activation function consists of several hyperbolic tangent functions and is applied as an activation function for neural networks. Our network was introduced in the attack layer of ReDMark proposed by Ahmadi et al. to compare it with their method. That is, the embedding and extraction networks had the same structure. We compared the usual JPEG compressed images and the images applying the quantized activation function. The results showed that a network with quantized activation functions can approximate JPEG compression with high accuracy. We also compared the bit error rate (BER) of estimated watermarks generated by our network with those generated by ReDMark. We found that our network was able to produce estimated watermarks with lower BERs than those of ReDMark. Therefore, our network outperformed the conventional method with respect to image quality and BER. [ABSTRACT FROM AUTHOR]

The underwater acoustic (UWA) channel causes large propagation delays and reduces the bit error rate (BER) of wireless communication systems. The t-distribution is the optimal distribution to perform UWA noise. In this study, polar-coded differential chaos shift keying (DCSK) and quadrature chaos shift keying (QCSK) communication with UWA noise are considered. First, we have proposed a PDF for the UWA noise channel, and based on this PDF, the theoretical BER is derived. Second, polar coding's performance is determined to demonstrate the improvement in the BER performance compared to the uncoded UWA system by means of Monte Carlo simulations. The experimental results prove that the nearest model that is applicable to the UWA channel is a t-distribution with five and six degrees of freedom. The BER formulas of the proposed systems are derived and compared with the simulation results. The results confirm the performance improvement of the polar-coded chaotic modulation systems over uncoded systems in UWA channels. [ABSTRACT FROM AUTHOR]

Mobile visible light communication (VLC) is key for integrating lighting and communication applications in the 6G era, yet there exists a notable gap in experimental research on mobile VLC. In this study, we introduce a mobile VLC system and investigate the impact of mobility speed on communication performance. Leveraging a laser-based light transmitter with a wide coverage, we enable a light fidelity (LiFi) system with a mobile receiving end. The system is capable of supporting distances from 1 m to 4 m without a lens and could maintain a transmission rate of 500 Mbps. The transmission is stable at distances of 1 m and 2 m, but an increase in distance and speed introduces interference to the system, leading to a rise in the Bit Error Rate (BER). The mobile VLC experimental system provides a viable solution to the issue of mobile access in the integration of lighting and communication applications, establishing a solid practical foundation for future research. [ABSTRACT FROM AUTHOR]

Multiple-input multiple-output orthogonal frequency division multiplexing (MIMO-OFDM) technology is widely used in integrated radar and communication systems (IRCSs). Moreover, index modulation (IM) is a reliable OFDM transmission scheme in the field of communication, which transmits information by arranging several distinguishable constellations. In this paper, we propose a sparse reconstruction-based joint signal processing scheme for integrated MIMO-OFDM-IM systems. Combining the advantages of MIMO and OFDM-IM technologies, the integrated MIMO-OFDM-IM signal design is realized through the reasonable allocation of bits and subcarriers, resulting in better intercarrier interference (ICI) resistance and a higher transmission efficiency. Taking advantage of the sparseness of OFDM-IM, an improved target parameter estimation method based on sparse signal reconstruction is explored to eliminate the influence of empty subcarriers on the matched filtering at the receiver side. In addition, an improved sequential Monte Carlo signal detection method is introduced to realize the efficient detection of communication signals. The simulation results show that the proposed integrated system is 5 dB lower in the peak sidelobe ratio (PSLR) and 1.5 × 10 5 lower in the number of complex multiplications than the latest MIMO-OFDM system and can achieve almost the same parameter estimation performance. With the same spectral efficiency, it has a lower bit error rate (BER) than existing methods. [ABSTRACT FROM AUTHOR]

With the development of the Internet and information technology, optical fiber communication systems need to meet people's information demand for large capacity and high speed. High-order phase modulation and channel multiplexing can improve the capacity and data rate of optical fiber communication systems, but they also bring the problem of bit error. To improve the transmission quality and reliability of optical fiber communication systems, forward error correction (FEC) coding techniques are commonly used, which serve as the fundamental approach to enhance the quality and reliability of fiber optic communication systems, ensuring that the received data remain accurate and reliable. The FEC in optical fiber communication systems is divided into three generations. The first generation FEC is mainly hard decision codewords, represented as RS code. The second generation FEC is mainly cascaded code, which stands for interleaved cascaded code. The third generation of FEC mainly refers to soft decision codes, which are represented as low-density parity-check (LDPC) codes. As a kind of FEC, LDPC codes stand out as pivotal contributors in the field of optical communication and have gained remarkable attention due to exceptional error correction performance and low decoding complexity. Based on IEEE802.16e standard, LDPC code with specific code length and rate is compiled and simulated in MATLAB and VPItransmissionMaker 10.1 and successfully incorporated into polarization multiplexed differential quadrature phase shift keying (PM-DQPSK) coherent optical transmission system. The simulation results indicate that the bit error rate (BER) can be reduced to 10−3 when the optical signal-to-noise ratio (OSNR) reaches 14.2 dB, and the BER experiences a reduction by nearly three orders of magnitude when the OSNR is 17.2 dB. These findings underscore the efficacy of LDPC codes in significantly improving the performance of optical communication systems, particularly in scenarios demanding robust error correction capabilities. This study provides valuable, significant results regarding the potential of LDPC codes for enhancing the reliability of optical transmission in real-world applications. [ABSTRACT FROM AUTHOR]

This paper studies the maximum reliability of multi-hop relay UAVs, in which UAVs provide wireless services for remote users as a coded cooperative relay without an end-to-end direct communication link. In this paper, the analytical expressions of the total power loss and total bit error rate are derived as reliability measures. First, based on the environmental statistical parameters, a LOS probability model is proposed. Then, the problem of minimizing the bit error rate of static and mobile UAVs is studied. The goal is to minimize the total bit error rate by jointly optimizing the height, elevation, power and path loss and introducing the maximum allowable path loss constraints, transmission power allocation constraints, and UAV height and elevation constraints. At the same time, the total path loss is minimized to achieve maximum ground communication coverage. However, the formulated joint optimization problem is nonconvex and generally difficult to solve. Therefore, we decomposed the problem into two subproblems and proposed an effective joint optimization iteration algorithm. Finally, the simulation results are given, and the analysis shows that the optimal height of different reliability measures is slightly different; thus, using the mobility of UAVs can improve the reliability of communication performance. [ABSTRACT FROM AUTHOR]

Orthogonal chirp division multiplexing (OCDM) offers a promising modulation technology for shallow water underwater acoustic (UWA) communication systems due to multipath fading resistance and Doppler resistance. To handle the various channel distortions and interferences, obtaining accurate channel state information is vital for robust and efficient shallow water UWA communication. In recent years, deep learning has attracted widespread attention in the communication field, providing a new way to improve the performance of physical layer communication systems. In this paper, the pilot-based channel estimation is transformed into a matrix completion problem, which is mathematically equivalent to the image super-resolution problem arising in the field of image processing. Simulation results show that the deep learning-based method can improve the channel distortion, outperforming the equalization performed by traditional estimator, the performance of Bit Error Rate is improved by 2.5 dB compared to the MMSE method in OCDM system. At the 7.5 to 20 dB region, it achieves better bit error rate performance than OFDM systems, and the bit error rate is reduced by approximately 53% compared to OFDM when the SNR value is 20, which is very useful in shallow water UWA channels with multipath extension and severe time-varying characteristics. [ABSTRACT FROM AUTHOR]

This article presents a technique for reducing the stabilization length of steady-state modes in step-index plastic optical fibers (POFs), which is significant for sensor networks, Internet of Things, signal processing, and data fusion in sensor systems. The results obtained with the com- putational tool developed suggest that the D-shape created in the POF effectively reduces the stabi- lization length of the modes and, by extension, minimizes the dispersion effects of the modes by filtering out high-order modes. Applying the analysis to commercial POFs, the authors experimen- tally verified a reduction in the stabilization length of modes from 27 to 10 m and from 20 m to 5 m. Reducing the mode stabilization length minimizes the bit error rate (BER) in short-length SI-POF- based optical links operating at 250 Mbp/s. A reduction from 7.6 × 10−7 to 3.7 × 10−10 was achieved. [ABSTRACT FROM AUTHOR]

Smart cities like Neom require efficient and reliable transportation systems to support their vision of sustainable and interconnected urban environments. High-speed trains (HSTs) play a crucial role in connecting different areas of the city and facilitating seamless mobility. However, to ensure uninterrupted communication along the rail lines, advanced communication systems are essential to expand the coverage range of each base station (BS) while reducing the handover frequency. This paper presents the dual transceiver free space optical (FSO) communication system as a solution to achieve these objectives in the operational environment of HSTs in Neom city. Our channel model incorporates log-normal (LN) and gamma–gamma (GG) distributions to represent channel impairments and atmospheric turbulence in the city. Furthermore, we integrated the siding loop model, providing valuable insights into the system in real-world scenarios. To assess the system's performance, we formulated the received signal-to-noise ratio (SNR) of the network under assumed fading conditions. Additionally, we analyzed the system's bit error rate (BER) analytically and through Monte Carlo simulation. A comparative analysis with reconfigurable intelligent surfaces (RIS) and relay-assisted FSO communications shows the superior coverage area and efficiency of the dual transceiver model. A significant reduction of up to 76% and 99% in the number of required BSs compared to RIS and relay, respectively, is observed. This reduction leads to fewer handovers and lower capital expenditure (CAPEX) costs. [ABSTRACT FROM AUTHOR]

A novel visible-light communication (VLC) system with 4 × 1 multi-input–single-output (MISO) channels is designed. In the system, the filter bank multicarrier (FBMC) and offset quadrature amplitude modulation (OQAM) techniques are used to generate downlink signals. The principles and implementation methods are proposed and analyzed, and the light intensity and received light power distribution of four LED emitters are discussed. The results demonstrate that it not only satisfies the requirements of indoor information access but also provides daily lighting. The used FBMC-OQAM signals exhibit better reception performance than orthogonal frequency division multiplexing (OFDM) signals. The system used has a lower bit error rate (BER) and larger access bandwidth compared to a 1 × 1 single-input–single-output (SISO) system. It has the potential for application advantages in future indoor VLC system applications. [ABSTRACT FROM AUTHOR]

A novel inserting pilot scheme to generate and distribute a frequency 16-tupling millimeter wave (MMW) radio over fiber (ROF) system without the bit walk-off effect via Mach–Zehnder modulators (MZMs) is proposed. The operation principle is analyzed and the feasibility of our proposed scheme is verified by simulation test. The main part of our scheme is a ±8th-order sidebands generator (SG), which is constructed by four MZMs connected in parallel. In the back-to-back (BTB) transmission case, by properly adjusting the voltage and initial phase of the radio frequency (RF) drive signals of the MZMs, ±8th-order sidebands are generated by the SG. In the data transmission case, the data signal is first split into two beams, one of which modulates the RF drive signal with an electrical phase modulator (PM) while the other is amplified by an electrical gainer (EG), and then the two beams are combined into one and used as the composite RF drive signal of the MZMs. By adjusting the modulation index of the PM and the gain of the EG, the data signal can only be modulated to the +8th-order sideband of the output of the SG. The optical carrier from the continuous wave (CW) laser is split into two paths: one is sent into the SG, and the other is used as a pilot signal. The output signal of SG is combined with the pilot signal and is transmitted to the base station (BS) via optical fiber. At the BS, the pilot signal is filtered out by a fiber Bragg grating (FBG) and used as the carrier for the uplink for carrier reuse. After filtering out the pilot, the signal from the FBG, which is composed of ±8th-order sidebands, is injected into a photodetector, and a frequency 16-tupling MMW with downlink data is generated. The key parameters' influence on the bit error rate (BER) and Q factor in the system is also analyzed. Our scheme can not only effectively overcome the bit walk-off effect caused by optical fiber chromatic dispersion and greatly increase the fiber transmission distance but can also effectively improve the performance and the tunability of system. Therefore, it has important application prospects in ROF systems. [ABSTRACT FROM AUTHOR]

In ultraviolet (UV) communication, On–Off Keying (OOK) is the primary modulation technique. Compared to OOK, frequency modulation offers stronger resistance to path attenuation. Currently, research on frequency modulation demodulation schemes for UV communication is limited, mainly employing waveform detection and laser pulse response methods, which require high detection sensitivity to light. This study presents a novel frequency modulation communication scheme using discrete Poisson channel distribution and optical pulse signal processing algorithms, enhancing the signal processing sensitivity of the existing frequency modulation scheme to the level of photons. The proposed system model is rigorously evaluated through theoretical derivations and simulations. Additionally, a hardware system integrating optical pulse counting, frequency detection, and clock data recovery algorithms is developed. Experimental results show the system achieving a 5 kbps transmission rate under frequency modulation. In non-line-of-sight (NLOS) scenarios, communication reaches up to 65 m, with the receiver elevation angle ranging from 10° to 25° and the bit error rate (BER) stabilized at 10−4, while in line-of-sight (LOS) situations, the BER remains at 10−5 up to 400 m and 10−4 up to 700 m, achieving the farthest distance and fastest communication rate achievable in the current FSK modulation scheme of ultraviolet communication systems. The integrated components enhance its applicability in communication systems. This study offers a valuable addition to UV communication technology. [ABSTRACT FROM AUTHOR]

As the Internet of Things (IoT) continues to expand, wireless communication is increasingly widespread across diverse industries and remote devices. This includes domains such as Operational Technology in the Smart Grid. Notably, there is a surge in resource-constrained devices leveraging wireless communication, especially with the advances of 5G/6G technology. Nevertheless, the transmission of wireless communications demands substantial power and computational resources, presenting a significant challenge to these devices and their operations. In this work, we propose the use of deep learning to improve the Bit Error Rate (BER) performance of Orthogonal Frequency Division Multiplexing (OFDM) wireless receivers. By improving the BER performance of these receivers, devices can transmit with less power, thereby improving IoT devices' battery life. The architecture presented in this paper utilizes a depthwise Convolutional Neural Network (CNN) for channel estimation and demodulation, whereas a Graph Neural Network (GNN) is utilized for Low-Density Parity Check (LDPC) decoding, tested against a proposed (1998, 1512) LDPC code. Our results show higher performance than traditional receivers in both isolated tests for the CNN and GNN, and a combined end-to-end test with lower computational complexity than other proposed deep learning models. For BER improvement, our proposed approach showed a 1 dB improvement for eliminating BER in QPSK models. Additionally, it improved 16-QAM Rician BER by five decades, 16-QAM LOS model BER by four decades, 64-QAM Rician BER by 2.5 decades, and 64-QAM LOS model BER by three decades. [ABSTRACT FROM AUTHOR]

Advanced light sources in the blue-green band are crucial for underwater wireless optical communication (UWOC) systems. Vertical-external-cavity surface-emitting lasers (VECSELs) can produce high output power and good beam quality, making them suitable for UWOC. This paper presents a 108 m distance UWOC based on a 100 mW 490 nm blue VECSEL and an acousto-optic modulator (AOM). The high-quality beam, which is near diffraction-limited, undergoes relatively small optical attenuation when using a conventional avalanche photodiode (APD) as the detector and employing 64-pulse position modulation (PPM). At the time-slot frequency of 50 MHz, the bit error rate (BER) of the UWOC was 2.7 × 10−5. This is the first reported AOM-based UWOC system with a transmission distance over 100 m. The estimated maximum transmission distance may be improved to about 180 m by fully utilizing the detection accuracy of the APD according to the measured attenuation coefficient of the blue VECSEL used. This type of UWOC system, composed of a high-beam-quality light source and a conventional detector, make it more closely suited to practical applications. [ABSTRACT FROM AUTHOR]

The code-shift keying (CSK) modulation method can achieve higher information transmission rates without changing the spread spectrum signal bandwidth. In order to optimise the spread spectrum modulation and demodulation of GNSS signals, in addition to the signal structure, binary phase-shift keying (BPSK) and CSK signals using time-division multiplexing are proposed. A tracking method based on the BPSK-CSK signals is also proposed, which generates the P-branch local codes by fast Fourier transform to obtain the code-slice spacings for the E-branch and the L-branch local codes. Then, the tracked BPSK signals and tracked CSK signals are compared and analysed. Finally, the bit error rate (BER) and tracking error of each method are compared and analysed by comparing with the tracking of conventional BPSK signals and tracking of CSK signals, in order to verify the convergence process of the I-branch integral value. The BPSK-CSK signal tracking method proposed in this paper combines the high information transmission rate of CSK-modulated signals and the low BER of BPSK signals, and the results provide a solid foundation for high-precision GNSS services. [ABSTRACT FROM AUTHOR]

The practical implementation of massive multi-user multi-input–multi-output (MU-MIMO) downlink communication systems power amplifiers that are energy efficient; otherwise, the power consumption of the base station (BS) will be prohibitive. Constant envelope (CE) precoding is gaining increasing interest for its capability to utilize low-cost, high-efficiency nonlinear radio frequency amplifiers. Our work focuses on the topic of CE precoding in massive MU-MIMO systems and presents an efficient CE precoding algorithm. This algorithm uses an alternating minimization (AltMin) framework to optimize the CE precoded signal and precoding factor, aiming to minimize the difference between the received signal and the transmit symbol. For the optimization of the CE precoded signal, we provide a powerful approach that integrates the majorization-minimization (MM) method and the fast iterative shrinkage-thresholding (FISTA) method. This algorithm combines the characteristics of the massive MU-MIMO channel with the second-order Taylor expansion to construct the surrogate function in the MM method, in which minimizing this surrogate function is the worst-case of the system. Specifically, we expand the suggested CE precoding algorithm to involve the discrete constant envelope (DCE) precoding case. In addition, we thoroughly examine the exact property, convergence, and computational complexity of the proposed algorithm. Simulation results demonstrate that the proposed CE precoding algorithm can achievean uncoded biterror rate (BER) performance gain of roughly 1 dB compared to the existing CE precoding algorithm and has an acceptable computational complexity. This performance advantage also exists when it comes to DCE precoding. [ABSTRACT FROM AUTHOR]

When a platform carrying a space laser communication system moves through the atmosphere, the relative motion of the turret and the air produces fluctuations in the air density, which affects the beam propagation, and, hence, the laser communication performance. In this paper, we propose a performance analysis method for the space laser communication link to the airborne platform. By employing this method, which is based on a flow field simulation, we are able to determine the laser link's communication performance curves for various flying situations. At an altitude of 5 km and a signal-to-noise ratio (SNR) of 10 dB for the laser communication link, the bit error rate (BER) under a flight speed of 0.4 Mach is 5.1 × 10 − 4 . With each 0.1 Mach increase in speed, the BER decreases by approximately 6 × 10 − 5 . If the flight speed is 0.8 Mach and the flight altitude increases from 5 km to 10 km, the BER decreases from 7. 26 × 10 − 4 to 1. 89 × 10 − 4 , but the system becomes more sensitive to changes in flight speed. Under the same flight altitude conditions, the beam spot on the downwind side is more affected by airflow, resulting in a general increase in the BER by approximately one order of magnitude, compared to the upwind side. [ABSTRACT FROM AUTHOR]

In this work, we present a novel four-channel coherent optical chaotic secure communication (COCSC) system, incorporating four simultaneous photonic reservoir computers in tandem with four coherent demodulation units. We employ a quartet of photonic reservoirs that capture the chaotic dynamics of four polarization components (PCs) emitted by a driving QD spin-VCSEL. These reservoirs are realized utilizing four PCs of a corresponding reservoir QD spin-VCSEL. Through these four concurrent photonic reservoir structures, we facilitate high-quality wideband-chaos synchronization across four pairs of PCs. Leveraging wideband chaos synchronization, our COCSC system boasts a substantial 4 × 100 GHz capacity. High-quality synchronization is pivotal for the precise demasking or decoding of four distinct signal types, QPSK, 4QAM, 8QAM and 16QAM, which are concealed within disparate chaotic PCs. After initial demodulation via correlation techniques and subsequent refinement through a variety of digital signal processing methods, we successfully reconstruct four unique baseband signals that conform to the QPSK, 4QAM, 8QAM and 16QAM specifications. Careful examination of the eye diagrams, bit error rates, and temporal trajectories of the coherently demodulated baseband signals indicates that each set of baseband signals is flawlessly retrieved. This is underscored by the pronounced eye openings in the eye diagrams and a negligible bit error rate for each channel of baseband signals. Our results suggest that delay-based optical reservoir computing employing a QD spin-VCSEL is a potent approach for achieving multi-channel coherent optical secure communication with optimal performance and enhanced security. [ABSTRACT FROM AUTHOR]

A short reference differential chaotic shift keying communication system based on reference signal scrambling transformation (RSST-SR-DCSK) is proposed in this paper. The system introduces information-bit-driven scramblers at the transmission end to effectively eliminate the correlation between the reference signal and information signal. At the receiving end, a descrambler is used to restore the correlation, thereby enhancing information transmission security. Additionally, the system employs a short reference transmission mechanism to further increase the information transmission rate. The transmitter and receiver structures of the system are designed through signal structure analysis. Theoretical analyses and simulations conducted in an additive white Gaussian noise (AWGN) channel demonstrate promising performance, including a low bit error rate (BER) and a favorable data-energy-to-bit-energy ratio (DBR). Simulation verification is performed to examine the impact of parameters on the bit error rate performance. A comparative analysis with traditional DCSK and SR-DCSK systems highlights the superior performance of the RSST-SR-DCSK system. [ABSTRACT FROM AUTHOR]

Physically unclonable functions (PUFs) are crucial for enhancing cybersecurity by providing unique, intrinsic identifiers for electronic devices, thus ensuring their authenticity and preventing unauthorized cloning. The SRAM-PUF, characterized by its simple structure and ease of implementation in various scenarios, has gained widespread usage. The soft-decision Reed–Muller (RM) code, an error correction code, is commonly employed in these designs. This paper introduces the design of an RM code soft-decision attack algorithm to reveal its potential security risks. To address this problem, we propose a soft-decision SRAM-PUF structure based on the elliptic curve digital signature algorithm (ECDSA). To improve the processing speed of the proposed secure SRAM-PUF, we propose a custom ECDSA scheme. Further, we also propose a universal architecture for the critical operations in ECDSA, elliptic curve scalar multiplication (ECSM), and elliptic curve double scalar multiplication (ECDSM) based on the differential addition chain (DAC). For ECSMs, iterations can be performed directly; for ECDSMs, a two-dimensional DAC is constructed through precomputation, followed by iterations. Moreover, due to the high similarity of ECSM and ECDSM data paths, this universal architecture saves hardware resources. Our design is implemented on a field-programmable gate array (FPGA) and an application-specific integrated circuit (ASIC) using a Xilinx Virtex-7 and an TSMC 40 nm process. Compared to existing research, our design exhibits a lower bit error rate ( 2.7 × 10 − 10 ) and better area–time performance (3902 slices, 6.615 μ s ECDSM latency). [ABSTRACT FROM AUTHOR]

As single-mode-fiber transmission systems are reaching their capacity limits, spatial-division multiplexing (SDM) techniques have been investigated to increase the per-fiber capacity. However, the compatibility with current single-mode transponders severely hinders the near-term deployment of SDM systems. In this paper, we experimentally propose two real-time SDM transmission schemes using commercial single-mode 400 G dual-polarized 16 quadrature amplitude modulation equipment. In the first experiment, 60 km weakly coupled single-mode 7-core fiber with a pair of fan-in and fan-out devices are adopted. In the second experiment, the fiber link consists of 60 km/150 km weakly coupled few-mode fiber (FMF) and low-modal-crosstalk mode multiplexers, in which only non-degenerate LP01 and LP02 modes are utilized. In order to investigate the effect of splice on SDM fiber links, 20-roll, 3 km multicore fibers (MCFs) and FMFs are spliced and tested in the experiments. The bit error rates of all SDM experiments are all below 4.75 × 10−2 forward-error-correction threshold of the 400 G transponders. The experimental results prove that the near-term deployment of SDM systems could be accelerated by utilizing weakly coupled MCFs or non-degenerate modes of weakly coupled FMFs which are compatible with commercial single-mode transponders without any software or hardware modifications. [ABSTRACT FROM AUTHOR]

This paper proposes a whistle-generative adversarial network (WhistleGAN) that generates whistles for biomimetic underwater covert acoustic communication. The proposed method generates new whistles to maintain covertness by avoiding the repetitive use of the same whistles. Since the human ear perceives octave frequency such that low-frequency resolution is relatively larger than that of low frequencies, the proposed WhistleGAN uses mel filter banks to keep the fidelity in mimicking while reducing the complexity. The mean opinion score test verified that the whistles generated by the proposed method and the recorded real whistles have a similar score of 4.3, and the computer simulations proved that the bit error rate performance of the proposed method is the same as that of the real whistle. [ABSTRACT FROM AUTHOR]

This study proposes and presents a new central office (CO) for the optical metro access network (OMAN) with an affordable and distinctive switching system. The CO's foundation is built upon a novel optical multicarrier (OMC) generation technique. This technique provides numerous frequency carriers that are characterized by a high tone-to-noise ratio (TNR) of 40 dB and minimal amplitude excursions. The purpose is to accommodate multiple users at the optical network unit side in the optical metropolitan area network (OMAN). The OMC generation is achieved through a cascaded configuration involving a single phase and two Mach Zehnder modulators without incorporating optical or electrical amplifiers or filters. The proposed OMC is installed in the CO of the OMAN to support the 1.2 Tbps downlink and 600 Gbps uplink transmission, with practical bit error rate (BER) ranges from 10−3 to 10−13 for the downlink and 10−6 to 10−14 for the uplink transmission. Furthermore, in the OMAN's context, optical fiber failure is a main issue. Therefore, we have proposed a possible solution for ensuring uninterrupted communication without any disturbance in various scenarios of main optical fiber failures. This demonstrates how this novel CO can rapidly recover transmission failures through robust switching a and centralized OLT. The proposed system is intended to provide users with a reliable and affordable service while maintaining high-quality transmission rates. [ABSTRACT FROM AUTHOR]

Four-level pulse amplitude modulation (PAM4) can transmit more information in the same symbol interval, effectively improving the information transmission rate and frequency band utilization of visible light communication (VLC). This paper proposes a method for encoding and decoding the PAM4 signal based on FPGA. The PAM4 signal is studied and analyzed under different channel noise models. The research results show that the bit error rate (BER) performance of the PAM4 signal is the best under the additive noise model. The influence of the multiplicative noise on the BER of the PAM4 signal is much greater than that of the additive noise. The BER performance of the PAM4 signal depends on the variance of the noise data. The greater the variance, the worse the BER performance. At the same time, an indoor VLC system based on PAM4 is designed. The simulation results verify that the system scheme is feasible and provides a way to further realize high-speed signal transmission. [ABSTRACT FROM AUTHOR]

Wireless power and data transmission (WPDT) solutions for medical implants are highly desired. However, achieving a high-power transmission efficiency and data rate simultaneously over an inductive link remains a significant challenge. This paper presents an innovative WPDT circuit that incorporates additional MOSFETs with an inductor in a Class-E power amplifier (PA), achieving amplitude-shift keying (ASK) modulation to address this issue. Firstly, the efficiency of the inductive power transmission link and Class-E PA was analyzed, providing design insights. Then, leveraging the insights, the proposed circuit was designed in such a way that it could effectively switch between two load networks to maintain high transfer efficiency for ASK modulation. Based on the load networks, the relationship between introducing the inductor's value and the data modulation index (MI) was derived to help achieve the desired high-power transmission efficiency. Additionally, the design and calculation of the proposed circuit are also presented. Finally, the proposed circuit was validated through simulations and experiments, demonstrating a power delivery to a load of 84.1 mW with a power transmission efficiency of 70.8% at a data rate and carrier frequency of 3 Mbps and 16 MHz, respectively. Furthermore, the bit error rate (BER) is less than 10−6 with an MI of 10%. [ABSTRACT FROM AUTHOR]

We derived the formula for the detection probability, signal-to-noise ratio (SNR), and average bit error rate (BER) for the signal orbital angular momentum (OAM) state carried via non-uniformly correlated high-order Bessel–Gaussian beam propagation in a turbulent atmosphere. The wavelength, receiver aperture, beam width, strength of the turbulent atmosphere, and topological charge effect on detection probability, SNR, and average BER of the signal OAM state were demonstrated numerically. The results show that the signal OAM state with low topological charge, a small receiver aperture, a narrow beam width, and a long wavelength can improve the performance of optical communications systems under conditions of weak atmospheric turbulence. Our results will be useful in long-distance free space optical (FSO) communications. [ABSTRACT FROM AUTHOR]