Search

Permanent magnet synchronous machines (PMSMs) with an overhang structure can increase power density by compensating for the increased magnetic energy of permanent magnets. To analyze the overhang structure, a three-dimensional (3D) analysis of PMSMs is essential. However, 3D analysis takes a long time and the modeling process is complicated in the initial design stage. To overcome these problems, a magnetic equivalent circuit technique is applied to the 2D model. In this paper, an optimal design method for PMSMs with an overhang structure is proposed based on the semi 3D magnetic equivalent circuit (MEC) and random walk method. By using semi 3D MEC, it is possible to quickly analyze PMSM and obtain accurate electromagnetic analysis results considering the overhang effect. Moreover, the volume and weight of PMSM can be minimized by optimizing the rotor's four design parameters using a random walk algorithm. To obtain high efficiency, the objective function is selected so that copper loss is minimized under the same constraints. The validity of the proposed design technique is verified by comparing the analysis results of semi 3D MEC and 3D finite element method for the derived optimal model. [ABSTRACT FROM AUTHOR]

This paper is about the magnetic field analysis of an interior permanent magnet motor (IPM motor) by using the equivalent magnetic circuit method (EMC method), which requires a small amount of computation time compared with the finite element method (FEM). IPM motors have a specific shape of rotor in which the permanent magnets are embedded. Therefore, in the bridge region, the magnetic saturation is generated due to the shape of the permanent magnet, which affects the magnetic flux density distribution in the air gap and the characteristics of the IPM motor. Thus, to design an IPM motor, the magnetic saturation effects should be considered along with the rotor shape. In addition, because the rotor of the IPM rotates at a high speed directly in connection with the load, the stress generated from the rotor must be stably distributed. Consequently, according to the rotor shape characteristics of the IPM, the stress is concentrated in the thin bridge region during high-speed rotation. When the stress generated in the bridge region exceeds the yield stress of the rotor iron core material, the bridge part is destroyed. Therefore, it is important to analyze the stress that occurs in the rotor during high-speed rotation in the rotor design stage of the IPM. In this study, we analyzed the magnetic field characteristics of an IPM motor using its equivalent magnetic circuit while considering the magnetic saturation in the bridge region. The stability of the rotor was determined by presenting a safety factor based on the maximum stress generated at the rotor for each speed. We derived the stator natural frequency to evaluate the resonance possibility between the electrical frequency and the stator natural frequency. Finally, the validity of the constructed equivalent magnetic circuit was verified by comparing the results with those obtained via the FEM analysis and experiments. [ABSTRACT FROM AUTHOR]

In general, high-speed machines should be designed with high efficiency electromagnetic and mechanical characteristics. It is important to analyze the electromagnetic loss for a design with high efficiency. In this study, the effects of the magneto–motive force and time harmonics of the stator current according to the winding distribution of a high-speed permanent magnet motor on the electromagnetic characteristics were comparatively analyzed using analytical methods and FEM. In addition, the final model was proposed by analyzing the relationship between the magnet usage according to the rotor shape and the electromagnetic and mechanical properties according to the winding patterns. Finally, the optimal model was manufactured and the validity was experimentally verified. [ABSTRACT FROM AUTHOR]

In general, high-speed machines should be designed to satisfy electromagnetic and mechanical characteristics. In this study, the design of high-speed permanent magnet synchronous generator with two different shaft materials considering overhang effect and mechanical characteristics was performed. It was confirmed that the leakage magnetic flux generated by the two shaft materials electromagnetically affects the high-speed generator. Additionally, it is important to accurately predict the natural frequency mode and critical speed to prevent damage and vibration of the rotating body owing to scattering during high-speed rotation. Therefore, the mechanical characteristics of the designed model were analyzed. In this study, we propose a design method that considers both the electromagnetic effects and mechanical characteristics. Subsequently, verification was performed through experiments and comparisons for the validity and reliability of the proposed design method. [ABSTRACT FROM AUTHOR]

This study deals with the noise, vibration, and harshness (NVH) characteristic analysis of permanent magnet synchronous motors (PMSMs) for electrical machines, such as electrically driven tools that are used in industries. An improved NVH design is needed for application to industrial tools. In general, the electromagnetic NVH characteristics of PMSMs are classified into electromagnetic excitation sources, such as total harmonic distortion of EMF, torque pulsation, magnetic pull force, and unbalanced magnetic force (UMF). This study compares the vibration and noise generated by fractional pole/slot combinations. In PMSMs with fractional pole/slot combinations, UMF is an important NVH source. PMSMs generate UMF because of armature reaction fields based on the pole/slot combinations and harmonics of magnetic flux density. UMF was derived using the finite element method, and the rotor vibration analysis was performed using electromagnetic mechanical coupling analysis. The analysis results and the effect of electromagnetic excitation characteristics on the rotor vibration of the PMSMs were compared and analyzed. [ABSTRACT FROM AUTHOR]

In this study, we performed an electromagnetic characteristic analysis of a permanent magnet synchronous machine considering the current waveform based on static rotor eccentricity. First, the characteristics of the back electromotive force were analyzed through the no-load analysis of the analysis model according to static rotor eccentricity. Next, a dynamic analysis was performed through mathematical modeling of a permanent magnet synchronous motor and PWM method. The input current during operation was derived through the dynamic analysis, and the core loss analysis was performed using derived input current. The core loss analysis was performed using the case where the fundamental wave current was applied and the input current derived through the dynamic analysis, and the results were compared. [ABSTRACT FROM AUTHOR]

In this study, we performed the electromagnetic and mechanical characteristic analyses of an 8-pole 12-slot interior permanent magnet synchronous motor (IPMSM). Permanent magnet synchronous motors are classified into surface permanent magnet synchronous motor and interior permanent magnet synchronous motors according to the type of rotor. The IPM type is advantageous for high-speed operation because of the structure where the permanent magnet is embedded inside the rotor, and it has the advantage of having a high output density by generating not only the magnetic torque of the permanent magnet, but also the reluctance torque. However, such a motor has more vibration/noise sources than other types, owing to changes in reluctance. The sources of motor noise/vibration can be broadly classified into electromagnetic, mechanical, and aerodynamic sources. Electromagnetic noise sources are classified into electromagnetic excitation sources, torque pulsations, and unbalanced magnetic forces (UMFs). Vibration and noise cause machine malfunctions and affect the entire system. Therefore, it is important to analyze the electromagnetic vibration source. In this study, the electromagnetic characteristics of an IPMSM were analyzed through the finite element method to derive the UMF. Vibration and noise analyses were performed by electromagnetic–mechanical coupling analysis, and vibration and noise characteristics based on electromagnetic noise sources were analyzed. [ABSTRACT FROM AUTHOR]

This paper presents an electromagnetic analysis and experimental verification to optimize the noise, vibration, and harshness (NVH) characteristics of a permanent magnet synchronous generator (PMSG) for wave energy converters (WECs). WECs applicable to breakwater installed in island areas require a wider operating range and a robust design for maintenance compared with wind-turbine systems. Owing to the use of a permanent magnet with a high energy density, the PMSG has a higher power density than other types of generators; however, strong electromagnetic excitation forces that affect the NVH characteristics are generated. Therefore, in this study, the electromagnetic forces are analyzed through an electromagnetic-field analysis using a subdomain analytical method. Based on the analytical solution, electromagnetic forces were determined. Four electromagnetic excitation forces were classified, and the methods for reducing electromagnetic excitation forces are presented here. Finally, a method for evaluating the system resonance through electromechanical analysis is presented. The proposed analysis, optimization, and experimental study are validated through comparison with finite-element analysis and experimental results. [ABSTRACT FROM AUTHOR]

In this study, a magnetic field is analyzed using an analytical method and compared with the electromagnetic characteristics of 8-pole 9-slot and 8-pole 12-slot permanent magnet synchronous machines considering rotor eccentricity. The magnetic flux density and back electromotive force (EMF) are derived using perturbation theory and electromagnetic theory. First, the Fourier modeling of a permanent magnet is performed through magnetization modeling, and two analysis regions are set based on several assumptions for applying the analytical method. Accordingly, the governing equations of the analysis regions are derived in the form of Poisson and Laplace equations. In addition, the undefined coefficients of the general solutions are calculated through general solutions and appropriate boundary conditions, and the magnetic flux density and back EMF of the air gap region are derived based on the definition of the magnetic vector potential. The results obtained using the analytical method are compared with the finite element method and experimental results. In addition, we perform a torque analysis considering rotor eccentricity and analyze the torque ripple based on rotor eccentricity for two cases involving the pole/slot combination. [ABSTRACT FROM AUTHOR]

In this study, analysis of core-loss occurring in the magnetic flux modulation core of a linear magnetic gear and the core of each mover is presented, using an analytical method. Losses in electric machines were generally calculated and analyzed using the finite element method (FEM). However, in the case of core-loss, the exact loss value could not be calculated using FEM data. Therefore, we considered the harmonic component of the air-gap magnetic flux density waveform with the modified Steinmetz equation, and performed a more accurate core-loss analysis with magnetic behavior analysis. Thus, we performed a calculated core-loss characteristic comparison with the FEM and the modified Steinmetz equation. [ABSTRACT FROM AUTHOR]