Search

Renovating buildings with cultural heritage significance is an important step toward achieving sustainability in our cities. The benefits are not only energy-related but also encompass social aspects that make these renovations a high apriority. The present work investigates the renovation process of a cultural heritage building in the Municipality of Trento in Italy, specifically focusing on achieving energy savings and renewable energy integration by implementing various renovation actions. These renovation actions include improvements to the building envelope, such as roof insulation and window replacements. Additionally, the renovation actions for active systems involve the installation of a ground-source heat pump for heating/cooling coupled with a borehole thermal energy storage system, which is an innovative technology for the renovation of cultural heritage buildings. The electrical systems of the building are upgraded through the addition of standard rooftop photovoltaics, innovative building-integrated photovoltaics (shingles), and the installation of an LED lighting system. The baseline and the renovation scenarios are studied using the dynamic simulation tool INTEMA.building, written in the programming language Modelica. This tool simulates both the building envelope and the energy systems with a high level of detail, using advanced control systems and adjustable time steps. According to the simulation analysis, the primary energy demand is reduced by 30.49%, the final energy demand by 36.74%, and the net electricity demand by 8.72%. Results from this study can be useful to interested stakeholders (e.g., building owners, architects, construction companies, public agents, and urban planners) dealing with the renovation of cultural heritage and protected buildings. Also, the results can be exploited for estimating energy savings by applying advanced renovation strategies for cultural heritage buildings. [ABSTRACT FROM AUTHOR]

Energy retrofit solutions that concern a building's roof structure play a significant role in the enhancement of a building's thermal behaviour. This study investigates the integration of phase change materials (PCMs) with cool coatings (CCs) or thermochromic coatings (TCCs), namely, a PCM roof, a PCM-CC roof, and a PCM-TCC roof, as alternative and novel tactics for the simultaneous control of solar heat transfer and solar heat reflection. An energy simulation analysis with the DesignBuilder tool is conducted for a one-story residence and the climatic conditions of Athens. The simulation results indicate that, compared to the existing concrete roof construction, the PCM roof, PCM-CC, and PCM-TCC roof systems demonstrate energy savings that reach up to 13.55%, 16.04%, and 21.70%, respectively. The systematic analysis reveals that the increase in PCM's thickness leads to an increase in the total electricity savings of the buildings, but in the case of PCM-CC and PCM-TCC roof systems, they merely effect the cooling thermal loads. The mean phase transition temperature that favours the cumulative electricity savings is 28 °C in the case of PCM and PCM-TCC roof systems and 35 °C in the case of PCM-CC roof systems. The methodology of this study allows the design of efficient, integrated roof systems with advanced thermal and optical properties as energy retrofit solutions for Mediterranean climatic conditions. [ABSTRACT FROM AUTHOR]

Power plants constitute the main sources of electricity production, and the calculation of their efficiency is a critical factor that is needed in energy studies. The efficiency improvement of power plants through the optimization of the cycle is a critical means of reducing fuel consumption and leading to more sustainable designs. The goal of the present work is the development of semi-empirical models for estimating the thermodynamic efficiency of power cycles. The developed model uses only the lower and the high operating temperature levels, which makes it flexible and easily applicable. The final expression is found by using the literature data for different power cycles, named as: organic Rankine cycles, water-steam Rankine cycles, gas turbines, combined cycles and Stirling engines. According to the results, the real operation of the different cases was found to be a bit lower compared to the respective endoreversible cycle. Specifically, the present global model indicates that the thermodynamic efficiency is a function of the temperature ratio (low cycle temperature to high cycle temperature). The suggested equation can be exploited as a quick and accurate tool for calculating the thermodynamic efficiency of power plants by using the operating temperature levels. Moreover, separate equations are provided for all of the examined thermodynamic cycles. [ABSTRACT FROM AUTHOR]

Renewable energy source-fed heat pumps (HPs) may perform up to very high-efficiency standards, offering a promising tool in the wider residential heat decarbonization effort. In this context, this paper investigates different heating configurations utilizing various renewable thermal sources in conjunction with an HP-based system in order to determine the optimal configuration in terms of efficiency, using an existing, fully functioning residential building in Zaragoza, Spain, as our case study, comprising 40 dwellings. Four different HP configurations are investigated:, (i) an air-source system, (ii) a ground-source system, (iii) a dual-source system with solar thermal collectors, and (iv) a triple-source system based on solar, geothermal, and ambient sources. For the purpose of such investigation, detailed dynamic energy simulations are conducted through the use of the INTEMA.building tool (developed in Modelica), applying a multi-objective optimization process that aims at minimizing both the annual electricity consumption and the net present cost. It is demonstrated that the renewable thermally driven HPs are more efficient than the conventional, air-source ones, with the seasonal coefficient of performance increasing by 9.98% (ground source), 4.57% (dual source), and 17.40% (triple source), compared to the air-source heat pump system. Finally, it is revealed (via integrated techno-economic analyses) that the most effective and economical design is the dual source system, while the most expensive is the ground-source configuration. These findings can guide the ongoing design efforts on green residential heat solutions at both research and commercial implementation level. [ABSTRACT FROM AUTHOR]

The goal of this investigation is the thorough analysis and optimization of a solar-assisted heat pump heating unit for covering the space heating demand for a building in Athens, Greece. The novelty of the studied system is the use of a high-temperature heat pump that can operate with radiative terminal units, leading to high thermal comfort standards. The examined system includes flat-plate solar thermal collectors, an insulated thermal storage tank, auxiliary electrical thermal resistance in the tank and a high-temperature heat pump. The economic optimization indicates that the optimal design includes 35 m2 of solar thermal collectors connected with a storage tank of 2 m3 for facing the total heating demand of 6785 kWh. In this case, the life cycle cost was calculated at 22,694 EUR, the seasonal system coefficient of performance at 2.95 and the mean solar thermal efficiency at 31.60%. On the other hand, the multi-objective optimization indicates the optimum design is the selection of 50 m2 of solar field connected to a thermal tank of 3 m3. In this scenario, the life cycle cost was calculated at 24,084 EUR, the seasonal system coefficient of performance at 4.07 and the mean solar thermal efficiency at 25.33%. [ABSTRACT FROM AUTHOR]

The compound parabolic concentrator is a promising technology for efficient solar irradiation exploitation at low- and medium-temperature levels. This collector type can be used in a series of applications, such as solar cooling, desalination, and industrial process heat applications. This work presents a novel compound parabolic concentrator that presents satisfying efficiency and low cost due to the use of flat glazing and not an evacuated tube receiver. More specifically, the goal of the present investigation is based on the energy and exergy analysis of a compound parabolic collector with flat glazing, which has a concentration ratio of 2.81. The collector is examined thermally and exegetically, aiming to calculate the efficiency of different operating inlet temperatures. Moreover, the solar unit is studied by a developed computational fluid dynamics model in the SolidWorks Flow Simulation tool. Emphasis is given to the calculation of the convection losses of the receiver tube with the internal air inside the collector. The heat convection coefficient is calculated, and the distribution of the thermal losses, convection, and radiation is presented. Furthermore, the temperature levels of the absorber, the cover glass, and the top thermal loss coefficient are found. The thermal efficiency of the solar unit was 77.4% for inlet temperature at 10 °C and 32.6% for inlet temperature at 110 °C. It was calculated that the maximum exergetic performance of the solar unit is 10.19% for operation at 90 °C, while the thermal efficiency for this case is 41.57%. Additionally, the temperature distributions for different cases are included in the present work. [ABSTRACT FROM AUTHOR]

High-temperature heat pumps consist of a promising choice for substituting conventional boilers and producing hot water with temperature levels in the range of 70–80 °C. The use of high-temperature heat pumps makes it possible to exploit the existing radiators in existing buildings to achieve effective heating of the indoor space and keep thermal comfort at high standards. The goal of this work is the detailed investigation of a high-temperature heat pump, with the R1234ze(E) as the working medium for producing heating at 80 °C for space-heating purposes, in Greek climate conditions. The analysis was conducted at two locations, one in the south (Athens—Zone B) and one in the north (Thessaloniki—Zone C), in order to examine the performance of the study's technology in the most representative locations of Greece. The thermodynamic analysis of the heat pump was performed with a developed model in Engineering Equation Solver by exploiting real data from the compressor manufacturer and by practically using a gray box model. The heating thermal loads were calculated with a dynamic analysis using TRNSYS software. According to the final results, the high-temperature heat pump was beneficial when compared to a conventional oil boiler from energy, financial, and environmental points of view. The net savings were found at EUR 6448 for Athens and EUR 13,161 for Thessaloniki; the simple payback period resulted in 8.03 years for Athens and 6.11 years for Thessaloniki, while the CO2 emissions avoidance was found at 35% for Athens and 32% for Thessaloniki. Last but not least, the lifetime CO2 emissions reduction was calculated at 20,882 kgCO2 for Athens and 35,278 kgCO2 for Thessaloniki. [ABSTRACT FROM AUTHOR]

An innovative parabolic trough concentrator coupled to a twin cavity receiver (PTC-TC) in evacuated tube conditions is investigated thermally and optically. The suggested design is compared with a PTC design with a flat receiver (PTC-F) in order to evaluate the efficiency of the proposed configuration. In the very first stages of the study, the optical efficiency was calculated for both collectors, and the optimum design was determined in the PTC-TC case. Then a mass flow rate independency procedure was conducted to ensure accurate results and to make a suitable comparison. The collectors were examined in a wide range of inlet temperatures ranging from 20 °C to 200 °C, and the thermal performance was calculated. Through the comparison process, it was revealed that the proposed collector appears to have higher thermal performance than the typical collector. In particular, there was a mean enhancement of approximately 8%, while the minimum enhancement was found to be greater than 5%. The simulation results regarding both configurations were verified through two models based on theoretical equations. In both geometries, the mean deviations in the verification procedure were lower than 5.6% in both the Darcy friction factor and the Nusselt number. The design and the simulations were conducted with the SolidWorks Flow Simulation tool. [ABSTRACT FROM AUTHOR]

The objective of this work is the integration of a linear cavity receiver in an asymmetric compound parabolic collector. Two different numerical models were developed; one for the conventional geometry and one for the cavity configuration. Both models were examined for inlet temperatures from 20 °C up to 80 °C, considering water as the operating fluid with a typical volume flow rate of 15 lt/h. Emphasis was given to the comparison of the thermal and optical performance between the designs, as well as in the temperature levels of the fluids and the receiver. The geometry of the integrated cavity receiver was optimized according to two independent parameters and two possible optimum designs were finally revealed. The optimization took place regarding the optical performance of the collector with the cavity receiver. The simulation results indicated that the cavity design leads to enhancements of up to 4.40% and 4.00% in the optical and thermal efficiency respectively, while the minimum possible enhancement was above 2.20%. The mean enhancements in optical and thermal performance were found to be 2.90% and 2.92% respectively. Moreover, an analytical solution was developed for verifying the numerical results and the maximum deviations were found to be less than 5% in all the compared parameters. Especially, in thermal efficiency verification, the maximum deviation took a value of less than 0.5%. The design and the simulations in the present study were conducted with the SolidWorks Flow Simulation tool. [ABSTRACT FROM AUTHOR]

The aim of the present work is the analysis of a solar-driven unit that is located on the non-interconnected island of Kythnos, Greece, that can produce electricity and green hydrogen. More specifically, solar energy is exploited by parabolic trough collectors, and the produced heat is stored in a thermal energy storage tank. Additionally, an organic Rankine unit is incorporated to generate electricity, which contributes to covering the island's demand in a clean and renewable way. When the power cannot be absorbed by the local grid, it can be provided to a water electrolyzer; therefore, the excess electricity is stored in the form of hydrogen. The produced hydrogen amount is compressed, afterward stored in tanks, and then finally can be utilized as a fuel to meet other important needs, such as powering vehicles or ferries. The installation is simulated parametrically and optimized on dynamic conditions, in terms of energy, exergy, and finance. According to the results, considering a base electrical load of 75 kW, the annual energy and exergy efficiencies are found at 14.52% and 15.48%, respectively, while the payback period of the system is determined at 6.73 years and the net present value is equal to EUR 1,073,384. [ABSTRACT FROM AUTHOR]

The exploitation of solar irradiation in the building sector is a promising way to achieve decarbonization and reduce the operating costs of the building. The potential of solar energy in Greece is high and therefore this idea can lead to excellent results. In this direction, the goal of the present analysis is the detailed investigation of different solar thermal systems for domestic hot water production in the different climate zones of Greece. Four typical cities are studied in order to examine the climate zones A, B, C, and D, while three different solar thermal collectors coupled to insulated storage tanks are studied for every city. The simple flat plate collector, the advanced flat plate collector, and the evacuated tube collector are the selected solar systems for the present work. The climate data and the characteristics of the solar thermal systems follow the Greek Chamber regulations known as "KENAK". The analysis is conducted by following the well-known f-chart method and every design is optimized by using energy and financial criteria. The final design is determined by conducting a multi-objective evaluation methodology. It is notable to state that the collector slope and the collecting area are important parameters of this work, while the study case regards a building with 30 residents. According to the final results, the advanced flat plate collector is the best choice according to the multi-objective evaluation procedure. [ABSTRACT FROM AUTHOR]

The continuous increase in global maritime freight transport has led to an increase in emissions. The port of Heraklion was selected as a case study to investigate the environmental impact of shipping in wider areas. Two different maritime fuels were examined: the conventional maritime fuel, marine diesel oil (MDO), and an alternative maritime fuel, liquified natural gas (LNG). To carry out this study, real data from the port of Heraklion, the Lloyd's Register Fairplay (LRF) Sea-Web database, and literature reviews were used. The bottom-up method was adopted for data processing. The results of this study demonstrate that alternative maritime fuels, such as LNG, could drastically reduce SO2, NOx, PM, and CO2 emissions. [ABSTRACT FROM AUTHOR]

The purpose of this simulation study is the examination of a solar-driven power cycle that is driven by collectors with evacuated tubes. The power cycle is an organic Rankine cycle (ORC) that works with cyclopentane. The novelty of the cycle is the use of reheating in order to enhance its thermodynamic efficiency, while the cycle also has a recuperator. Moreover, the cycle is compared with the conventional ORC in order to determine the performance enhancement with the examined idea. The analysis is done with a developed program in Engineering Equation Solver and both in steady-state and transient conditions for a typical year. The analysis was conducted in terms of energy and economic performance. According to an optimization procedure for maximizing the net present values of the investment, it is found that the novel design leads to a net present value of 68 k€, a simple payback of 10 years, and a yearly energy efficiency of 7.0%, while the respective values for the conventional ORC are 44 k€, 10.8 years, and 5.1% for its optimal design according to the net present values maximization. Thus, it is obvious that the suggested design increases both energy and financial performance, compared to the usual design. [ABSTRACT FROM AUTHOR]

The objective of this investigation is to present a novel concept for the optimum exploitation of volatile electricity from renewable energy sources. The idea of the Carnot battery is extended to a general concept for trigeneration which can be called "power to XYZ". This idea is applied for the building sector where there are needs for cooling production, space-heating production/domestic hot water production and electricity. More specifically, volatile electricity feeds a multi-stage heat pump that produces cold storage at 0 °C for cooling, medium heating storage at 50 °C for space heating and high thermal storage at around 115 °C for future utilization in an organic Rankine cycle for electricity production. The storage is performed in three different temperature levels, with latent storage proposed for proper long-term and efficient storage. The use of ice is suggested especially for cold storage in order to make the design a cost-effective one. This work is a theoretical preliminary thermodynamic analysis performed with a model created in Engineering Equation Solver. The results indicate the system's maximum exergy efficiency is found at 45.28%, while the respective energy efficiency is found at 322.16%. Moreover, this work includes parametric studies and calculations about the operating margins of the suggested system. [ABSTRACT FROM AUTHOR]

The objective of the present work is the investigation of a novel polygeneration system for power, refrigeration and heating production at two temperature levels. The present system uses CO2 as the working fluid, which is an environmentally friendly fluid. The total configuration is a combination of a transcritical refrigeration cycle coupled to a Brayton cycle with recompression, which is fed by a biomass boiler. The examined system, at nominal operating conditions, produces refrigeration at 5 °C, and heating at 45 °C and 80 °C. Additionally, the system can be converted into a trigeneration system where the two heating outputs are produced at the same temperature level. The system was studied parametrically by changing the following seven critical parameters: turbine inlet temperature, high pressure, medium pressure, heat exchanger effectiveness, refrigeration temperature, heat rejection temperature and high heating temperature. In nominal operating conditions, the system energy and exergy efficiencies were 78.07% and 26.29%, respectively. For a heat input of 100 kW, the net power production was 24.50 kW, the refrigeration production was 30.73 kW, while the low and high heating production was 9.24 kW and 13.60 kW, respectively. The analysis was conducted with a developed model in Engineering Equation Solver. [ABSTRACT FROM AUTHOR]

The parabolic trough solar collector (PTC) is the most mature solar concentrating technology, and this technology is applied in numerous thermal applications. Usually, the thermal efficiency of the PTC is expressed with the aid of polynomial expressions. However, there is not a universal expression that is applied in all cases with high accuracy. Many studies use expressions with the first-degree polynomial, second-degree, or fourth-degree polynomial expressions. In this direction, this work is a study that investigates different expressions about the thermal efficiency of a PTC with a systematic approach. The LS-2 PTC module is examined with a developed numerical model in the Engineering Equation Solver for different operating temperatures and solar beam irradiation levels. This model is validated using experimental literature data. The found data are approximated with various polynomial expressions with up to six unknown parameters in every case. In every case, the mean absolute percentage error and the R2 are calculated. According to the final results, the use of the third power term leads to the best fitting results, as well as the use of the temperature difference term (ΔΤ), something that is new according to the existing literature. More specifically, the final suggested formula has the following format: "ηcol = a0 + a3∙ΔT3/Gb + b∙ΔΤ". The results of this work can be used by the scientists for the optimum fitting of the PTC efficiency curves and for applying the best formulas in performance determination studies. [ABSTRACT FROM AUTHOR]

The objective of this study is the investigation of different solar concentrating collectors for application in a trigeneration system. Parabolic trough collectors, linear Fresnel reflectors and solar dishes are the examined solar concentrating technologies in this work. The trigeneration unit includes an organic Rankine cycle coupled with an absorption heat machine that operates with LiBr/water. The analysis is performed throughout the year by using the weather data of Athens in Greece. The results of this work indicate that the selection of parabolic trough collectors is the best choice because it leads to the maximum yearly system energy efficiency of 64.40% and to the minimum simple payback period of 6.25 years. The second technology is the solar dish with the energy efficiency of 62.41% and the simple payback period of 6.95 years, while the linear Fresnel reflector is the less efficient technology with the energy efficiency of 35.78% and with a simple payback period of 10.92 years. Lastly, it must be stated that the thermodynamic investigation of the system is performed with a created model in Engineering Equation Solver, while the dynamic analysis is performed with a code in the programming language FORTRAN. [ABSTRACT FROM AUTHOR]

The objective of this paper is the comparison of two dedicated subcooling methods, after the gas cooler, in a CO2 transcritical refrigeration system. The use of vapor compression refrigeration with R134a for subcooling is the first method, and the second is the use of an absorption chiller that operates with a LiBr-H2O working pair. The examined systems are compared energetically and exegetically with the reference transcritical CO2 refrigeration cycle without subcooling. The analysis is conducted for different operating scenarios and in every case, the system is optimized by selecting the proper temperature and pressure levels. The analysis is performed with a developed and validated model in Engineering Equation Solver. According to the final results, the use of the absorption chiller is able to decrease the system electricity consumption by about 54% compared to the simple transcritical cycle, while the decrease with the mechanical subcooling is 41%. Both systems with dedicated subcooling are found to have an important increase in the system exergy performance compared to the simple transcritical cycle. However, the system with the mechanical subcooling is found to be the best choice exegetically, with a small difference from the system with the absorption chiller. [ABSTRACT FROM AUTHOR]

The objective of this work is the comparison of the different cascade refrigeration systems with CO2 in the low-temperature circuit. A total of 18 different cascade refrigeration systems are examined including the CO2/CO2 cascade system. The analysis is performed for four different evaporator temperatures (−35, −25, −15 and −5 °C), while the condenser temperature is ranged from 10 up to 45 °C. The systems are compared energetically, as well as using the total equivalent warming impact (TEWI) for yearly operation at the weather conditions of Athens (Greece). The final results show that all the examined cascade systems are more efficient than the CO2/CO2 cascade system. The natural refrigerants (NH3, R290, R600, R600a and R1270) seem to be the most appropriate choices according to the energy and the TEWI criteria. Moreover, the refrigerant R152a is a promising choice for achieving high performance with a relatively low TEWI. [ABSTRACT FROM AUTHOR]

Heat pumps are efficient and well-established technologies for providing the proper cooling load in the building sector. The objective of this work is the parametric investigation of a heat pump operating with the promising refrigerant R152a for different operating conditions. More specifically, the heat pump is studied for different ambient temperatures, different indoor temperatures and various compressor rotational speeds. The cooling capacity and the coefficient of performance (COP) are the most important parameters which calculated in every scenario. A detailed model is developed in Engineering Equations Solver (EES) and it is validated with literature data. According to the final results, the system can operate in nominal conditions with 5 kW cooling capacity and a COP equal to 6.46. It is found that the COP can be ranged from 4 to 12 and the cooling capacity, while the cooling capacity can reach up to 9 kW. Moreover, a regression equation about the performance of the system is suggested. The obtained results indicate that the use of the R152a leads to high performance and so it can be an environmentally friendly choice for the cooling systems. [ABSTRACT FROM AUTHOR]

The objective of this work was to optimize and to evaluate a solar-driven trigeneration system which operates with nanofluid-based parabolic trough collectors. The trigeneration system includes an organic Rankine cycle (ORC) and an absorption heat pump operating with LiBr-H2O which is powered by the rejected heat of the ORC. Toluene, n-octane, Octamethyltrisiloxane (MDM) and cyclohexane are the examined working fluids in the ORC. The use of CuO and Al2O3 nanoparticles in the Syltherm 800 (base fluid) is investigated in the solar field loop. The analysis is performed with Engineering Equation Solver (EES) under steady state conditions in order to give the emphasis in the exergetic optimization of the system. Except for the different working fluid investigation, the system is optimized by examining three basic operating parameters in all the cases. The pressure in the turbine inlet, the temperature in the ORC condenser and the nanofluid concentration are the optimization variables. According to the final results, the combination of toluene in the ORC with the CuO nanofluid is the optimum choice. The global maximum exergetic efficiency is 24.66% with pressure ratio is equal to 0.7605, heat rejection temperature 113.7 °C and CuO concentration 4.35%. [ABSTRACT FROM AUTHOR]

The importance of stakeholders' analysis for the effective management of risks in any business sector has been widely recognized and depicted in International Organization for Standardization (ISO) standards. This kind of analysis is even more necessary in businesses and organizations dealing with significant technological and market changes, such as the provision and usage of Liquefied Natural Gas (LNG) as a marine fuel. In the LNG bunkering industry, several methods have been proposed to support risk management. However, they all suffer from an important drawback: they guide risk management mainly to the identification, analysis, and control of potential accidental events within a health and safety or a technical reliability analysis framework, failing to structure the correlation of risks with the actual actors, i.e., the numerous stakeholders whose decisions may influence directly or indirectly the organization's objectives. This paper presents a method to systematically analyze the role of stakeholders and their ability to pose threats and/or opportunities to an organization. The proposed approach employs the Social Network Analysis (SNA) methodology to model and analyze stakeholder interests, interactions, and relationships that are important to the organization's objectives. The method is applied in a small-scale LNG bunkering project at a Greek port. [ABSTRACT FROM AUTHOR]

The objective of the present study is the parametric investigation of a ground source heat pump for space heating purposes with boreholes. The working fluid in the heat pump is CO2, and the geothermal field includes boreholes with vertical heat exchangers (U-tube). This study is conducted with a developed model in Engineering Equation Solver which is validated with data from the literature. Ten different parameters are investigated and more specifically five parameters about the heat pump cycle and five parameters for the geothermal unit. The heat pump's examined parameters are the high pressure, the heat exchanger effectiveness, the temperature level in the heater outlet, the flow rate of the geothermal fluid in the evaporator and the heat exchanger thermal transmittance in the evaporator. The other examined parameters about the geothermal unit are the ground mean temperature, the grout thermal conductivity, the inner diameter of the U-tube, the number of the boreholes and the length of every borehole. In the nominal design, it is found that the system's coefficient of performance is 4.175, the heating production is 10 kW, the electricity consumption is 2.625 kW, and the heat input from the geothermal field is 10.23 kW. The overall resistance of the borehole per length is 0.08211 mK/W, while there are 4 boreholes with borehole length at 50 m. The parametric analysis shows the influence of the ten examined parameters on the system's performance and on the geothermal system characteristics. This work can be used as a reference study for the design and the investigation of future geothermal-driven CO2 heat pumps. [ABSTRACT FROM AUTHOR]

The utilization of solar irradiation in the building sector is vital to create sustainable systems. Trigeneration systems are highly efficient systems that usually produce electricity, heating and cooling which are the main energy needs in the buildings. The objective of this work is the energetic and financial investigation of three different solar-driven trigeneration systems that can be applied in buildings with high energy needs (e.g., hospitals or commercial buildings). The parabolic trough solar collector (PTC) is selected to be used because it is the most mature solar concentrating technology. The examined configurations practically are different combinations of organic Rankine cycle (ORC) with heat pumps. System 1 includes a PTC coupled to an ORC which feeds an absorption heat pump machine. System 2 includes a PTC which simultaneously feeds an ORC and absorption machine. System 3 includes a PTC which feeds an ORC and a heat exchanger for heating, while the ORC is fed with and electricity a vapor compression cycle for cooling production. The simple payback period of System 1 is 5.62 years and it is the lowest, with System 2 to have 7.82 years and System 3 to have 8.49 years. The energy efficiency of the three systems is 78.17%, 43.30% and 37.45%, respectively, while the exergy efficiency 15.94%, 13.08% and 12.25%, respectively. System 1 is the best configuration according to energy, exergy and financial analysis. This study is performed with developed thermodynamic models in Engineering Equation Solver and a dynamic model in FORTRAN. [ABSTRACT FROM AUTHOR]

This article presents a simulation study which focuses on the thermodynamic analysis of a solar-driven trigeneration system for heating, cooling, and electricity production. The system uses parabolic trough collectors operating with Therminol VP-1 for feeding an organic Rankine cycle operating with toluene and an absorption heat pump operating with a LiBr–H2O working pair. The collecting area is selected at 100 m2 and the storage tank at 4 m3. The system is studied parametrically in order to examine the impact of various parameters on the system energy efficiency, system exergy efficiency, electricity production, heating production, and cooling production in the simple payback period of the investment. The examined parameters are the following: solar beam irradiation level, solar beam irradiation angle, superheating degree in the turbine inlet, pressure level in the turbine inlet, heat source temperature level, generator temperature level, and the heat input in the generator. For the nominal case of a 15 kW generator input, the electricity production is 6.3 kW, the heating production 11.5 kW, and the cooling production 10.7 kW. The system energy efficiency is 40.7%, while the system exergy efficiency is 12.7%. The financial investigation of the investment proved that it is viable with the simple payback period to be 8.1 years in the nominal case and it can be reduced to 7.8 years with an optimization procedure. Lastly, it has to be said that the examined system is found to be a viable configuration which is an ideal choice for application in the building sector. The analysis was conducted under steady-state conditions with a model developed using Engineering Equation Solver (EES). [ABSTRACT FROM AUTHOR]

In this study, a small dish concentrator with a cylindrical cavity receiver was experimentally investigated as the heat source of a dryer. The system was examined for operation with pure thermal oil and Al2O3/oil nanofluid as the working fluids in the solar system. Moreover, the design, the development, and the evaluation of the dried mint plant are presented in this work. Also, the solar dryer system was simulated by the SolidWorks and ANSYS CFX software. On the other side, the color histogram of the wet and dried mint samples based on the RGB method was considered. The results revealed that the different temperatures of the solar working fluids at the inlet and outlet of the cavity receiver showed similar trend data compared to the variation of the solar radiation during the experimental test. Moreover, it is found that the cavity heat gain and thermal efficiency of the solar system was improved by using the nanofluid as the solar working fluid. Furthermore, the required time for mint drying had decreased by increasing the drying temperature and increasing air speed. The highest drying time was measured equal to 320 min for the condition of the air speed equal to 0.5 m/s and the drying temperature of 30 °C. A good agreement was observed between the calculated numerical results and measured experimental data. Finally, based on the color histogram of the wet and dried mint samples, it was concluded that intensity amount of the red color of the mint increased with the drying process compared to intensity amount of the red color of the wet mint sample. [ABSTRACT FROM AUTHOR]

Energy consumption in the building sector is responsible for a very large amount of electricity consumption worldwide. The reduction of this consumption is a crucial issue in order to achieve sustainability. The objective of this work is to investigate the use of phase change materials (PCMs) in the building walls in order to reduce the heating and the cooling loads. The novelty of this work is based on the investigation of different scenarios about the position of the PCM layer in the south and the north walls. PCMs can improve the thermal performance and the thermal comfort of a building due to their ability to store large amounts of thermal energy in latent form and so to reduce the temperature fluctuations of the structural components, keeping them within the desired temperature levels. More specifically, this work presents and compares the heating loads, the cooling loads and the temperature distribution of a building in Athens (Greece), with and without PCMs in different positions in the south wall and in the north walls. The simulation is performed with the commercial software TRNSYS 17, using the TRNSYS component: type 1270 (PCM Wall). The results proved that the maximum energy savings per year were achieved by the combination of the insulation and the PCM layer in the north and south walls. More specifically, the reductions in the heating and the cooling loads were found to be 1.54% and 5.90%, respectively. Furthermore, the temperature distribution with the use of a PCM layer is the most acceptable, especially during the summer period. [ABSTRACT FROM AUTHOR]

The thermal enhancement of parabolic trough collectors is a critical issue and numerous ideas have been applied in the literature on this domain. The objective of this paper is to investigate some usual thermal enhancement techniques for improving the performance of evacuated and non-evacuated receivers of parabolic trough solar collectors. More specifically, the use of twisted tape inserts, perforated plate inserts, and internally finned absorbers are compared with the reference case of the smooth absorber. The analysis is conducted with a developed and validated thermal model in Engineering Equation Solver. The collector is investigated for a typical flow rate of 100 L/min and for inlet temperatures between 50 °C and 350 °C with Syltherm 800 as working fluid. According to the final results, the use of internally finned absorber leads to the highest thermal efficiency enhancement, which is up to 2.1% for the non-evacuated collector and up to 1.6% for the evacuated tube collector. The perforated plate inserts and the twisted tape inserts were found to lead to lower enhancements, which are up to 1.8% and 1.5%, respectively, for the non-evacuated collector, while they are up to 1.4% and 1.2%, respectively, for the evacuated collector. Moreover, the pressure drop increase with the use of the thermal enhancement methods is investigated and the use of internally finned absorber is found again to be the superior technique with the performance evaluation criterion to be ranged from 1.5 to 1.8 for this case. [ABSTRACT FROM AUTHOR]