Search

As a result of the exhaustion of fossil energy sources and the corresponding increase of their negative environmental impact, recent research has intensively focused on regions of alternative energy resources and, especially, on solar energy. Slow tracking of the maximum power point (MPP) and fluctuations around the MPP reduce the efficiency of photovoltaic power generation systems (PV). This study offers a novel design for the MPPT controller, which we refer to as the "hybrid IC-LQI approach", which combines the incremental conductance (IC) technique and the linear quadratic integral (LQI) controller based on the boost converter's small signal model. We conduct a comparative study of the proposed hybrid IC-LQI, and the classical one-stage IC technique in order to show the effectiveness of our proposal under three different scenarios of weather conditions and load. According to simulation findings, the proposed hybrid IC-LQI approach has a high tracking efficiency of up to 98.92%, owing to faster tracking of MPP with very large reduction of oscillations. On the other hand, the IC technique provides less efficiency, up to 96.1%, showing very slow tracking and high oscillations. The presented analysis of the results confirms the superior performance of the developed hybrid IC-LQI technique to the classical IC technique. [ABSTRACT FROM AUTHOR]

In this article, a novel maximum power point tracking (MPPT) controller for a photovoltaic (PV) system is presented. The proposed MPPT controller was designed in order to extract the maximum of power from the PV-module and reduce the oscillations once the maximum power point (MPP) had been achieved. To reach this goal, a combination of fuzzy logic and an adaptive radial basis function neural network (RBF-NN) was used to drive a DC-DC Boost converter which was used to link the PV-module and a resistive load. First, a fuzzy logic system, whose single input was based on the incremental conductance (INC) method, was used for a variable voltage step size searching while reducing the oscillations around the MPP. Second, an RBF-NN controller was developed to keep the PV-module voltage at the optimal voltage generated from the first stage. To ensure a real MPPT in all cases (change of weather conditions and load variation) an adaptive law based on backpropagation algorithm with the gradient descent method was used to tune the weights of RBF-NN in order to minimize a mean-squared-error (MSE) criterion. Finally, through the simulation results, our proposed MPPT method outperforms the classical P and O and INC-adaptive RBF-NN in terms of efficiency. [ABSTRACT FROM AUTHOR]