Search

Land surface temperature (LST) is a fundamental parameter in global climate, environmental, and geophysical studies. Remote sensing is an essential approach for obtaining large-scale and frequently updated LST data. However, due to the wide field of view of remote sensing sensors, the observed LST with diverse view geometries suffers from inconsistency caused by the thermal radiation directionality (TRD) effect, which results in LST products being incomparable, especially during daytime. To address this issue and correct current off-nadir LSTs to nadir LSTs, a semi-physical time-evolved kernel-driven model (TEKDM) is proposed, which depicts multitemporal TRD patterns during the daytime. In addition, we employ a Bayesian optimization method to calibrate seven unknown parameters in the TEKDM. Validation results using the U.S. Climate Reference Network (USCRN) sites show that the RMSE (MBE) for GOES-16 and MODIS off-nadir LST products is reduced from 3.29 K (−2.0 K) to 2.34 K (−0.02 K), with an RMSE reduction of 0.95 K (29%) and a significant reduction in systematic bias. Moreover, the proposed method successfully eliminates the angular and temporal dependence of the LST difference between the satellite off-nadir LST and in situ nadir LST. In summary, this study presents a feasible approach for estimating the high-accuracy nadir LST, which can enhance the applicability of LST products in various domains. [ABSTRACT FROM AUTHOR]

Surface upward longwave radiation (SULR) is one of the four components of surface net radiation. Geostationary satellites can provide high temporal but coarse spatial resolution SULR products. Downscaling coarse SULR to a higher resolution is important for fine-scale thermal condition monitoring. Statistical regression downscaling is widely used due to its simplicity and is built on the assumption that the thermal parameter like land surface temperature (LST) or SULR has a relationship with the related surface factors like the normalized difference vegetation index (NDVI), and the relationship remains unchanged in any scales. In this study, to establish the relationship between SULR and the related surface factors, we chose the multiple linear regression (MLR) model and five surface factors (i.e., the modified normalized difference water index (MNDWI), normalized difference built-up and soil index (NDBSI), NDVI, normalized moisture difference index (NMDI), and urban index (UI)) to drive the downscaling process. Additionally, a step-by-step downscaling strategy was applied to reach the 100-fold increase in spatial resolution, transitioning the estimated SULR from 4 km of the advanced geostationary radiation imager (AGRI) onboard FengYun-4B (FY-4B) satellite to 40 m of the visual and infrared multispectral imager (VIMI) in infrared spectrum onboard GaoFen5-02 (GF5-02). Finally, we evaluated the downscaling results by comparing the downscaled SULR values with the in situ measured SULR and GF5-02-calculated SULR, and the root mean square errors (RMSEs) were 19.70 W/m2 and 24.86 W/m2, respectively. Throughout this MLR-based step-by-step downscaling method (high-frequency data from FY-4B and high spatial resolution data from GF5-02), high spatiotemporal SULR (15 min temporal resolution, 40 m spatial resolution) were successfully generated instead of coarse spatial resolution ones from the FY-4B satellite or a coarse temporal resolution one from the GF5-02 satellite, relieving the above-mentioned conflict to some extent. [ABSTRACT FROM AUTHOR]

Land surface temperature (LST) is a vital parameter in the surface energy budget and water cycle. One of the most important foundations for LST studies is a theory to understand how to model LST with various influencing factors, such as canopy structure, solar radiation, and atmospheric conditions. Both physical-based and empirical methods have been widely applied. However, few studies have compared these two categories of methods. In this paper, a physical-based method, soil canopy observation of photochemistry and energy fluxes (SCOPE), and two empirical methods, random forest (RF) and long short-term memory (LSTM), were selected as representatives for comparison. Based on a series of measurements from meteorological stations in the Heihe River Basin, these methods were evaluated in different dimensions, i.e., the difference within the same surface type, between different years, and between different climate types. The comparison results indicate a relatively stable performance of SCOPE with a root mean square error (RMSE) of approximately 2.0 K regardless of surface types and years but requires many inputs and a high computational cost. The empirical methods performed relatively well in dealing with cases either within the same surface type or changes in temporal scales individually, with an RMSE of approximately 1.50 K, yet became less compatible in regard to different climate types. Although the overall accuracy is not as stable as that of the physical method, it has the advantages of fast calculation speed and little consideration of the internal structure of the model. [ABSTRACT FROM AUTHOR]

In order to improve the simulation accuracy of directional brightness temperature (DBT) and the retrieval accuracy of component temperature, a model considering intra-row heterogeneity to simulate the DBT angular distribution over crop canopy is proposed. At individual scale, the probability of leaf appearance is inversely proportional to the distance from central stem. On the basis of this assumption, we formulated leaf area volume density (LAVD) spatial distribution at three hierarchical scales: individual scale, row scale, and scene scale. The equations for directional gap probability and bi-directional gap probability were modified to adapt the heterogeneity of row structure. Afterwards, a straightforward radiative transfer model was built based on the gap probabilities. A set of simulated data was generated by the thermal radiosity-graphics combined model (TRGM) as the benchmark to evaluate both forward simulation and inversion ability of the new model; we compared the new DBT model against an existing model assuming row as homogeneous box. With the growth of crops, the canopy structure of row crops will gradually change from row structure to continuous canopy. The new DBT model agreed with the TRGM model much better than the homogeneous row model at the middle stage of the crop growth season. The new model and the homogeneous row model achieve similar accuracy at early stage and end stage. At the middle growth stage, the new model can improve the accuracy of soil temperature retrieval. We recommend the new DBT model as an option to improve the DBT simulation and component temperature retrieval for row-planted crop canopy. In particular, the more accurate component temperatures during the middle growth stage are fundamentally important in characterizing crop water status, evapotranspiration, and soil moisture, which are subsequently critical for predicting crop productivity. [ABSTRACT FROM AUTHOR]

An operational split-window (SW) algorithm was developed to retrieve high-temporal-resolution land surface temperature (LST) from global geostationary (GEO) satellite data. First, the MODTRAN 5.2 and SeeBor V5.0 atmospheric profiles were used to establish a simulation database to derive the SW algorithm coefficients for GEO satellites. Then, the dynamic land surface emissivities (LSEs) in the two SW bands were estimated using the Advanced Spaceborne Thermal Emission and Reflection Radiometer (ASTER) Global Emissivity Dataset (GED), fractional vegetation cover (FVC), and snow cover products. Here, the proposed SW algorithm was applied to Himawari-8 Advanced Himawari Imager (AHI) observations. LST estimates were retrieved in January, April, July, and October 2016, and three validation methods were used to evaluate the LST retrievals, including the temperature-based (T-based) method, radiance-based (R-based) method, and intercomparison method. The in situ night-time observations from two Heihe Watershed Allied Telemetry Experimental Research (HiWATER) sites and four Terrestrial Ecosystem Research Network (TERN) OzFlux sites were used in the T-based validation, where a mean bias of −0.70 K and a mean root-mean-square error (RMSE) of 2.29 K were achieved. In the R-based validation, the biases were 0.14 and −0.13 K and RMSEs were 0.83 and 0.86 K for the daytime and nighttime, respectively, over four forest sites, four desert sites, and two inland water sites. Additionally, the AHI LST estimates were compared with the Collection 6 MYD11_L2 and MYD21_L2 LST products over southeastern China and the Australian continent, and the results indicated that the AHI LST was more consistent with the MYD21 LST and was generally higher than the MYD11 LST. The pronounced discrepancy between the AHI and MYD11 LST could be mainly caused by the differences in the emissivities used. We conclude that the developed SW algorithm is of high accuracy and shows promise in producing LST data with global coverage using observations from a constellation of GEO satellites. [ABSTRACT FROM AUTHOR]

Surface upward longwave radiation (SULR) is a critical component in the calculation of the Earth's surface radiation budget. Multiple clear-sky SULR estimation methods have been developed for high-spatial resolution satellite observations. Here, we comprehensively evaluated six SULR estimation methods, including the temperature-emissivity physical methods with the input of the MYD11/MYD21 (TE-MYD11/TE-MYD21), the hybrid methods with top-of-atmosphere (TOA) linear/nonlinear/artificial neural network regressions (TOA-LIN/TOA-NLIN/TOA-ANN), and the hybrid method with bottom-of-atmosphere (BOA) linear regression (BOA-LIN). The recently released MYD21 product and the BOA-LIN—a newly developed method that considers the spatial heterogeneity of the atmosphere—is used initially to estimate SULR. In addition, the four hybrid methods were compared with simulated datasets. All the six methods were evaluated using the Moderate Resolution Imaging Spectroradiometer (MODIS) products and the Surface Radiation Budget Network (SURFRAD) in situ measurements. Simulation analysis shows that the BOA-LIN is the best one among four hybrid methods with accurate atmospheric profiles as input. Comparison of all the six methods shows that the TE-MYD21 performed the best, with a root mean square error (RMSE) and mean bias error (MBE) of 14.0 and −0.2 W/m2, respectively. The RMSE of BOA-LIN, TOA-NLIN, TOA-LIN, TOA-ANN, and TE-MYD11 are equal to 15.2, 16.1, 17.2, 21.2, and 18.5 W/m2, respectively. TE-MYD21 has a much better accuracy than the TE-MYD11 over barren surfaces (NDVI < 0.3) and a similar accuracy over non-barren surfaces (NDVI ≥ 0.3). BOA-LIN is more stable over varying water vapor conditions, compared to other hybrid methods. We conclude that this study provides a valuable reference for choosing the suitable estimation method in the SULR product generation. [ABSTRACT FROM AUTHOR]

Land surface temperatures (LSTs) obtained from remote sensing data are crucial in monitoring the conditions of crops and urban heat islands. However, since retrieved LSTs represent only the average temperature states of pixels, the distributions of temperatures within individual pixels remain unknown. Such data cannot satisfy the requirements of applications such as precision agriculture. Therefore, in this paper, we propose a model that combines a fast radiosity model, the Radiosity Applicable to Porous IndiviDual Objects (RAPID) model, and energy budget methods to dynamically simulate brightness temperatures (BTs) over complex surfaces. This model represents a model-based tool that can be used to estimate temperature distributions using fine-scale visible as well as near-infrared (VNIR) data and temporal variations in meteorological conditions. The proposed model is tested over a study area in an artificial oasis in Northwestern China. The simulated BTs agree well with those measured with the Advanced Spaceborne Thermal Emission and Reflection Radiometer (ASTER). The results reflect root mean squared errors (RMSEs) less than 1.6 °C and coefficients of determination (R2) greater than 0.7. In addition, compared to the leaf area index (LAI), this model displays high sensitivity to wind speed during validation. Although simplifications may be adopted for use in specific simulations, this proposed model can be used to support in situ measurements and to provide reference data over heterogeneous vegetation surfaces. [ABSTRACT FROM AUTHOR]