Search

In the present paper, the capillary barrier formation at the interface between soil layers, which is characterized by textural discontinuities, has been analyzed. This mechanism has been investigated by means of a finite element model of a two-layer soil stratification. The two considered formations, belonging to the pyroclastic succession of the "Pomici di Base" Plinian eruption (22 ka, Santacroce et al., 2008) of the Somma–Vesuvius volcano, are affected by shallow instability phenomena likely caused by progressive saturation during the rainfall events. This mechanism could be compatible with the formation of capillary barriers at the interface between layers of different grain size distributions during infiltration. One-dimensional infiltration into the stratified soil was parametrically simulated considering rainfall events of increasing intensity and duration. The variations in the suction and degree of saturation over time allowed for the evaluation of stability variations in the layers, which were assumed as part of stratified unsaturated infinite slopes. [ABSTRACT FROM AUTHOR]

Different interferometric approaches have been developed over the past few decades to process SAR data and recover surface deformation, and each approach has advantages and limitations. Finding an accurate and reliable interval for preparing mean deformation rate maps (MDRMs) remains challenging. The primary purpose of this paper is to implement an application consisting of three unsupervised clustering algorithms (UCAs) for determining the best interval from SAR-derived deformation data, which can be used to interpret long-term deformation processes, such as subsidence, and identify displacement patterns. Considering Port Harcourt (in the Niger Delta) as the study area, it was essential to remove the sources of error in extracting deformation signals from SAR data, spatially ionospheric and tropospheric delays, before using UCAs to obtain its characteristics and real deformation data. Moreover, another purpose of this paper is to implement the advanced integration method (AIM) for atmospheric phase screen (APS) correction to enhance deformation signals obtained through different SAR processing approaches, including interferometric SARs (two-pass interferometry, InSAR) and multitemporal interferometry SARs (n-pass interferometry, DInSAR; permanent scatterer interferometry (PSI); and small baseline subset (SBAS)). Two methods were chosen to evaluate and find the best technique with which to create an MDRM: The first one was to compare the signals corrected by the AIM and the vertical component of the GPS station, which showed the AIM providing 58%, 42%, and 28% of the matching with GNSS station outputs for InSAR, PSI, and SBAS, respectively. Secondly, similarity measures and Davies–Bouldin index scores were implemented to find an accurate and reliable interval in which the SBAS technique with the unsupervised K-medians method has been chosen. Based on GNSS vertical deformation in a 500 m radius around the station, the SBAS K-medians technique expressed up to 5.5% better deformation patterns than the map of SAR processing techniques. [ABSTRACT FROM AUTHOR]

An increasing number of satellite platforms provide daily images of the Earth's surface that can be used in quantitative monitoring applications. However, their cost and the need for specific processing software make such products not often suitable for rapid mapping and deformation tracking. Google Earth images have been used in a number of mapping applications and, due to their free and rapid accessibility, they have contributed to partially overcome this issue. However, their potential in Earth's surface displacement tracking has not yet been explored. In this paper, that aspect is analyzed providing a specific procedure and related MATLAB™ code to derive displacement field maps using digital image correlation of successive Google Earth images. The suitability of the procedure and the potential of such images are demonstrated here through their application to two relevant case histories, namely the Slumgullion landslide in Colorado and the Miage debris-covered glacier in Italy. Result validation suggests the effectiveness of the proposed procedure in deriving Earth's surface displacement data from Google Earth images. [ABSTRACT FROM AUTHOR]

Nowadays, several methodologies, implemented for satellite or terrestrial surveys, reveal that daily and weekly site-positioning time series can exhibit linear trends plus seasonal oscillations. Such periodic components affect the evaluation of subsidence rates and, thus, they must be recognized and properly modelled. In this work, the periodic component of vertical land motion in Po Delta (Northern Italy) is estimated by a multi-component and multi-source procedure recently proposed by some of the authors for studying land subsidence in delta areas. First, land vertical motion data, acquired in the central part of the Po Delta over a six-year time interval, were compared with hydro-meteorological and climate datasets collected from nineteen stations distributed over the entire Delta. Then, four physically based models of the test site were implemented to verify the water pressure- and water mass-dependent processes inferred from the analytical phase. Modelling results show that the annual ground oscillation is better explained by soil moisture change, although river water mass variation gives a relevant contribution to land deformation, especially in the wet periods. Finally, to account for intra-annual processes, the joint contributions of all the inferred sources were treated as a nonlinear problem and solved applying the generalized reduced gradient method. The obtained combination is well supported by statistical parameters and provides the best agreement with the geodetic observations. [ABSTRACT FROM AUTHOR]

The new standards on energy saving for new and existing buildings have animated both researchers and technicians in recent years, aiming at reducing the dependence on fossil fuels, improving indoor comfort, and systems efficiency. In this scenario, special attention must be paid to historical buildings that need to preserve their key testimonial heritage within the society. This paper describes the design and realization stages of a pilot system based on a ground-coupled heat pump, operating both in heating and cooling modes, installed in the monumental site of Saints Marcellino and Festo (SM&F), in Naples, Southern Italy. This study aims to demonstrate that low-enthalpy geothermal systems can be employed as energy retrofit applications in buildings of historical, artistic, and cultural interest and, at the same time, to prove that the use of this technology allows achieving the objectives, set at global level by the current regulations, and requiring a reduction of carbon dioxide emissions (tCO2) of 53% compared to technology using fossil fuels. [ABSTRACT FROM AUTHOR]

Climate change has increased the likelihood of the occurrence of disasters like wildfires, floods, storms, and landslides worldwide in the last years. Weather conditions change continuously and rapidly, and wildfires are occurring repeatedly and diffusing with higher intensity. The burnt catchments are known, in many parts of the world, as one of the main sensitive areas to debris flows characterized by different trigger mechanisms (runoff-initiated and debris slide-initiated debris flow). The large number of studies produced in recent decades has shown how the response of a watershed to precipitation can be extremely variable, depending on several on-site conditions, as well as the characteristics of precipitation duration and intensity. Moreover, the availability of satellite data has significantly improved the ability to identify the areas affected by wildfires, and, even more importantly, to carry out post-fire assessment of burnt areas. Many difficulties have to be faced in attempting to assess landslide risk in burnt areas, which present a higher likelihood of occurrence; in densely populated neighbourhoods, human activities can be the cause of the origin of the fires. The latter is, in fact, one of the main operations used by man to remove vegetation along slopes in an attempt to claim new land for pastures or construction purposes. Regarding the study area, the Camaldoli and Agnano hill (Naples, Italy) fires seem to act as a predisposing factor, while the triggering factor is usually represented by precipitation. Eleven predisposing factors were chosen and estimated according to previous knowledge of the territory and a database consisting of 400 landslides was adopted. The present work aimed to expand the knowledge of the relationship existing between the triggering of landslides and burnt areas through the following phases: (1) Processing of the thematic maps of the burnt areas through band compositions of satellite images; and (2) landslide susceptibility assessment through the application of a new statistical approach (machine learning techniques). The analysis has the scope to support decision makers and local agencies in urban planning and safety monitoring of the environment. [ABSTRACT FROM AUTHOR]