Search

Municipal solid waste (MSW) management poses significant challenges due to the generation of organic waste materials, including the under-sieve fraction (USF), which contains high moisture and organic content. Hydrothermal carbonization (HTC) has emerged as a promising technology for converting USF into hydrochar (HC), a valuable energy-rich material with improved combustible properties. Despite the potential of HTC for waste valorization, comprehensive studies on the thermoecological cost (TEC) and environmental implications of applying HTC to USF are limited. In this study, a detailed analysis of the TEC associated with the HTC process applied to USF from MSW was conducted. The TEC assessment was conducted considering varying dilution ratios (DS/W), operational temperatures (180–220 °C), and reaction times (1–8 h) to evaluate the energy efficiency, resource utilization, and environmental impact of the HTC process. Comparative assessments were made with alternative USF treatment methods, such as bio-stabilization, landfilling, and wastewater treatment. The results indicate that the optimal conditions for minimizing TEC are a temperature of 180 °C, a reaction time of 1 h, and a dilution ratio of 0.15, achieving a TEC value of approximately 9.25 GJ per ton of USF. This represents a significant reduction compared to the conventional treatment methods, which showed a TEC of 14.9 GJ/ton of USF. This study provides a comprehensive comparison of HTC with alternative USF treatment methods, such as bio-stabilization and landfilling, highlighting HTC's superior energy efficiency and environmental sustainability. These findings offer valuable insights into the energy consumption, resource utilization, and environmental impact of HTC, emphasizing its potential for sustainable waste valorization. [ABSTRACT FROM AUTHOR]

The optimal process conditions concerning the hydrothermal carbonization of digested sewage sludge are crucial to the economically effective technology needed to produce a solid product, hydrochar, for energy purposes. Accordingly, different residence times, 0.5 h, 1 h and 2 h, were investigated in order to understand the effect of residence time on the process. Furthermore, the physical and chemical properties of hydrochar were investigated and compared to the raw material. For these reasons, analyses describing fuel properties were performed, including ultimate and proximate analyses, HHV, and TGA analysis. The latter method was employed to study the combustion process of solid samples. In addition, the oxide content of different elements within the ash of solid samples was determined using the XRF method to calculate indices related to operational problems during the combustion process. The results confirmed that time did not matter significantly and the physical and chemical properties of hydrochar were very similar to each other. However, the contact angle for 2 h of residence time confirmed that a longer processing time resulted in a more hydrophobic character of hydrochar and enabled more effective dewaterability of hydrothermal slurry. It was also noted that the hydrothermal carbonization process affected the sewage sludge in a positive way. In brief, the results confirmed that the hydrochar was a brittle, moderately hydrophilic, solid carbon-containing product that provided a different combustion performance than the raw sewage sludge. [ABSTRACT FROM AUTHOR]

In agricultural biogas plants, besides biogas, the by-product digestate is also produced. Due to its high moisture content and organic origin, it can successfully be applied in the hydrothermal carbonization process to avoid the fate of landfilling. This paper reviews the properties of agricultural digestate and its hydrothermal conversion (HTC) into hydrochar and process water. The type of feedstock and the parameters of the HTC process, such as temperature, pressure and residence time, affects the physical and chemical characteristics of hydrochar. Therefore, its possible application might be as a biofuel, fertilizer, soil improver, adsorber, or catalyst. In this paper, the properties of hydrochar derived from agricultural digestate are widely discussed. [ABSTRACT FROM AUTHOR]

One of the by-products of a mechanical-biological waste treatment plant is the under-sieve fraction, which requires separation prior to further processing of municipal mixed waste. This stream usually follows the fate of landfilling. Instead, it could be introduced to the hydrothermal carbonization (HTC) process to improve its fuel properties and become solid recovered fuel. The organic fraction and high moisture content (approximately 26%) of under-sieve fraction are favorable properties for the HTC process. In this study, hydrochars, the solid product of HTC, were produced at 200 and 220 °C with residence times of 1, 4, and 8 h. The main aim of this investigation was to establish the influence of different process parameters on hydrochars' fuel properties. Thermogravimetric analysis (TGA), Fourier-transform infrared spectroscopy (FTIR), and scanning electron microscopy (SEM) were employed in the analyses. The results confirmed the positive effects of hydrothermal carbonization on the under-sieve fraction of municipal mixed waste properties. The ignition temperature increased from 247 °C to 288 °C and burnout temperature decreased to 443 °C from 489 °C after hydrothermal carbonization, causing a shorter combustion process. The determined key combustion parameters were: S = 12.4 × 10−8%·min−2·°C−3, Hf = 1174.9 °C and Di = 0.0075%·min−3, which in comparison to USF decreased by 44%, increased by 33%, and decreased by 29%, respectively, and became closer to those of coal. Furthermore, the identified structural changes indicate that hydrochars could be successfully used in energy production. The most promising results were found for hydrochar produced at 220 °C for 1 h, leading to a better combustion performance and providing a more stable and a less violent flame. [ABSTRACT FROM AUTHOR]

Hydrochars (HTCD) derived from digestates, namely D1 and D2 (from two plants) of sewage sludge, were examined with respect to their fuel properties. The hydrothermal carbonization (HTC) tests were performed at temperatures of 200 and 220 °C, for 2 and 4 h of residence times, and with 1:10 and 1:8 digestate to water ratios (D/W), causing an increase of ash content (max. 55.8%), and a decrease c.a. 20% of the higher heating value except for a slight increase to 15 kJ/kg at 200 °C and 4 h in hydrochars. Conversely, the combustion profiles of hydrochars moved towards higher temperatures (225–257 °C) and finished earlier at lower temperatures (423–438 °C). The HTCD from D1 and D2 showed very similar properties under the same conditions (200 °C, 4 h, 1:8 D/W) for combustion characteristic temperatures, indices and profiles. The best efficiency was found for HTCD2. In addition, the polluted post-processing liquid phase was treated by a distillation process providing 30% higher pH, 50% lower BOD values, up to 15 times lower COD values, and c.a. three times lower conductivity. [ABSTRACT FROM AUTHOR]