Search

The present paper describes the design of shape-oriented hydrogel nanospheres using a facile ultrasonication-supported crosslinked copolymerization technique. The effect of variable monomer concentration on the homogeneity of hydrogel nanospheres was investigated. The chitosan-cl-poly(MMA) hydrogel nanospheres were well characterized using various techniques such as FTIR, XRD, TGA, SEM, and TEM. The chitosan-cl-poly(MMA) hydrogel nanospheres were studied for their swelling behavior and could potentially be used as a novel adsorbent for rhodamine B dye remediation from aqueous media. The study found that utilizing chitosan-cl-poly(MMA) nanohydrogel spheres at the optimal pH 5 increased RhB dye adsorption capacity from 7.9 to 17.8 mg/g (pH 2 to 5), followed by a slight reduction. Furthermore, when nanohydrogel concentration increased, adsorption capacity dropped from 18.03 to 2.8 mg/g, but adsorption percentage climbed from 90.2% to 97.8%. At an initial dye concentration of 140 mg/L, rhodamine B adsorption achieved 204.3 mg/g in 60 min. The rhodamine B dye adsorption study includes adsorption kinetics, isotherm, and thermodynamics analyses. The interpretation of the adsorption study revealed that Langmuir isotherms fit best with a qmax value of 276.26 mg/g, which is in close approximation with the experimental value, whereas pseudo-second-order kinetics explains the adsorption process rate. The interaction of RhB dye with chitosan-cl-poly(MMA) hydrogel nanospheres involves multiple forces such as electrostatic interactions, hydrogen bonding, van der Waals forces, etc. [ABSTRACT FROM AUTHOR]

Antibiotic water contamination is a growing environmental problem in the present day. As a result, water treatment is required for its reduction and elimination. Due to their important role in resolving this issue, photocatalysts have drawn a great deal of interest over the past few decades. When non-biodegradable organic matter is present in polluted water, the photo catalytic process, which is both environmentally friendly and an improved oxidation method, can be an effective means of remediation. In this regard, we report the successful synthesis of pure phased rare earth doped ZnO nanoparticles for tetracycline degradation. The prepared catalysts were systematically characterized for structural, optical, and magnetic properties. The optical band gap was tailored by rare earth doping, with redshift for Sm and Dy doped nanoparticles and blueshift for Nd doped ZnO nanoparticles. The analysis of photoluminescence spectra revealed information about the defect chemistry of all synthesised nanoparticles. Magnetic studies revealed that all synthesized diluted magnetic semiconductors exhibit room temperature ferromagnetism and can be employed for spintronic applications. Moreover, Dy doped ZnO nanoparticles were found to exhibit a maximum degradation efficiency of 74.19% for tetracycline (TCN) removal. The synthesized catalysts were also employed for the degradation of Malachite green (MG), and Crystal violet (CV) dyes. The maximum degradation efficiency achieved was 97.18% for MG and 98% for CV for Dy doped ZnO nanoparticles. The degradation mechanism involved has been discussed in view of the reactive species determined from scavenging experiments. [ABSTRACT FROM AUTHOR]

In this paper, we describe the creation of a moderate band gap Nd-substituted Ni-Zn ferrite as a nano photo catalyst via a simple and cost-effective process of solution combustion. Nd substitution alters the crystallite size, shape, band gap, and magnetic characteristics of Ni-Zn ferrite significantly. Investigations using X-ray diffraction revealed that all samples display a pure phase. The average crystallite size was determined to be between 31.34 and 38.67 nm. On Nd doping, morphology investigations indicated that the shape of nanoparticles changed from approximately spherical to stacked grains. Band gap experiments confirmed the red shift in optical band gap on Nd doping. The synthesized catalysts Ni0.5Zn0.5Fe2O4 (Nd0), Ni0.5Zn0.45Nd0.05Fe2O4 (Nd1), and Ni0.5Zn0.5Nd0.05Fe1.95O4 (Nd2) have been effectively used for the degradation of methylene blue dye under the solar light irradiation. The sample with Nd substitution on Fe sites had the highest methylene blue degradation efficiency. Nd2 photo catalyst degrades the methylene blue dye with a degradation efficiency of 98% in 90 min of solar light irradiation. The photocatalytic activity is triggered by the existence of oxygen vacancies and a mixed valence state of Ni, Fe, and Nd, as confirmed by the XPS investigation. In addition, the investigations on scavenging reveal that the hydroxyl radical is a reactive component in the degradation process. The degradation route has been investigated in relation to the many potential reactions and discovered reactive substances. [ABSTRACT FROM AUTHOR]

Constructing visible-light-active Z-scheme heterojunctions has proven fruitful in enhancing the photocatalytic activity of photocatalysts for superior water clean-up. Herein, we report the fabrication of a CoFe2O4@Bi2O3/NiO (CBN) Z-scheme nanoheterojunction. The obtained CBN heterojunction was used for visible-light-assisted degradation of ofloxacin (OFL) in water. The OFL degradation efficiency achieved by the CBN heterojunction was 95.2% in 90 min with a rate constant of kapp = 0.03316 min−1, which was about eight times that of NiO and thirty times that of CoFe2O4. The photocatalytic activity of a Bi2O3/NiO Z-scheme heterojunction was greatly enhanced by the visible activity and redox mediator effect of the cobalt ferrite co-catalyst. Higher charge-carrier separation, more visible-light capture, and the Z-scheme mechanism in the Z-scheme system were the important reasons for the high performance of CBN. The scavenging experiments suggested ●O2− as an active species for superior OFL degradation. The possible OFL degradation pathway was predicted based on LC-MS findings of degradation intermediate products. The magnetic nature of the CBN helped in the recovery of the catalyst after reuse for six cycles. This work provides new insights into designing oxide-based heterojunctions with high visible-light activity, magnetic character, and high redox capabilities for potential practical applications in environmental treatment. [ABSTRACT FROM AUTHOR]

Authentication, authorization, and data access control are playing major roles in data security and privacy. The proposed model integrated the multi-factor authentication–authorization process with dependable and non-dependable factors and parameters based on providing security for tenants through a hybrid approach of fully homomorphic encryption methodology: the enhanced homomorphic cryptosystem (EHC) and the Brakersky–Gentry–Vaikuntanathan (BGV) scheme. This research was composed of four major elements: the fully homomorphic encryption blended schemes, EHC and BGV; secure token and key implications based on dependable and don-dependable factors; an algorithm for generating the tokens and the suitable keys, depending on the user's role; and the execution of experimental test cases by using the EHC algorithm for key and token generation, based on dependable and non-dependable parameters and time periods. The proposed approach was tested with 152 end-users by integrating six multi-tenants, five head tenants, and two enterprise levels; and achieved a 92 percent success rate. The research integrated 32-bit plain text in the proposed hybrid approach by taking into consideration the encryption time, decryption time, and key generation time of data transmission via cloud servers. The proposed blended model was efficient in preventing data from ciphertext attacks and achieved a high success rate for transmitting data between the multi-tenants, based on the user-role-user type of enterprise cloud servers. [ABSTRACT FROM AUTHOR]

Herein, we report the designing of a C3N4/BiOI heterostructure that is supported on gum acacia-crosslinked-poly(acrylamide) hydrogel to fabricate a novel nanocomposite hydrogel. The potential application of the obtained nanocomposite hydrogel to remediate crystal violet dye (CVD) in an aqueous solution was explored. The structural and functional analysis of the nanocomposite hydrogel was performed by FTIR (Fourier transform infrared spectroscopy), X-ray diffraction (XRD), transmission electron microscopy (TEM), and scanning electron microscopy (SEM). The different reaction parameters, such as CVD concentration, nanocomposite hydrogel dosage, and working pH, were optimized. The C3N4/BiOI heterostructure of the nanocomposite hydrogel depicts Z-scheme as the potential photocatalytic mechanism for the photodegradation of CVD. The degradation of CVD was also specified in terms of COD and HR-MS analysis was carried to demonstrate the major degradation pathways. [ABSTRACT FROM AUTHOR]