Search

The preparation of novel structures of light-diffusing particles is currently a research focus in the field of light-diffusing materials. This study, conducted by the common melt-blending process, controlled thermodynamic and kinetic factors to distribute smaller-sized organic silica bead (OSB) particles at the interface between a polycarbonate (PC) matrix and spherical island-phase styrene–acrylonitrile copolymer (SAN) for the in situ formation of compound eye-like microspheres with SAN as "large eyes" and OSBs as "small eyes". Through the multiple-scattering effects of these compound eye-like microspheres, these light-diffusing materials significantly improved the haze, scattering range, and light-shielding capabilities while maintaining high transmittance. Specifically, the PC/SAN-OSB light-scattering materials achieved a haze of 100% with an OSB content of only 0.17%, maintaining a transmittance of 88%. Compared with the PC/OSB system with the same level of haze, the addition of OSB was reduced by 88%. Therefore, this study achieved exceptionally effective light-diffusing materials through a simple, environmentally friendly, and low-cost preparation method, suitable for the scalable production of light-diffusing materials in new display and lighting fields. [ABSTRACT FROM AUTHOR]

Quercetin, as one of the most biologically active natural flavonoids, is widely found in various vegetables, fruits and Chinese herbs. In this work, molecularly imprinted polymer (MIP) was synthesized through surface molecular imprinting technology with sol-gel polymerization mechanism on SiO2 at room temperature using quercetin as the template, SiO2 as the supporter, 3-aminopropyltriethoxysilane (APTES) as the functional monomer, and tetraethoxysilane (TEOS) as the cross-linker. The prepared MIP was characterized via scanning electron microscope (SEM), Fourier transform infrared spectroscopy (FT-IR) and nitrogen adsorption measurements to validate its surface morphology, structure and functionality. SEM images revealed that the morphology of MIP was rough and spherical with the particle size of 260 nm larger than that of the support SiO2. In the FTIR spectra of MIP, the band around 1499 cm−1 and 2932 cm−1 were assigned to N−H and C-H groups, respectively. The results indicated that the imprinted polymer layers were grafted on the surface of SiO2 and the MIP had been successfully prepared. Since the specific surface area and pore volume of MIP were markedly higher than those of NIP and SiO2 and were 52.10 m2 g−1 and 0.150 cm3 g−1, respectively, it was evident that the imprinting process created corresponding imprinted cavities and porosity. The MIP for adsorbing quercetin was evaluated by static adsorption experiment. The results indicated that the adsorption equilibrium could be reached within 90 min and the maximum adsorption capacity was as high as 35.70 mg/g. The mechanism for adsorption kinetics and isotherm of MIP for quercetin was proved to conform the pseudo-second-order kinetics model (R2 = 0.9930) and the Freundlich isotherm model (R2 = 0.9999), respectively, revealing that chemical adsorption and heterogeneous surface with multilayer adsorption dominated. In contrast to non-imprinted polymer (NIP), the MIP demonstrated high selectivity and specific recognition towards quercetin whose selectivity coefficients for quercetin relative to biochanin A were 1.61. Furthermore, the adsorption capacity of MIP can be maintaining above 90% after five regeneration cycles, indicating brilliant reusability and potential application for selective adsorption of quercetin. [ABSTRACT FROM AUTHOR]