Search

The hydrodeoxygenation (HDO) of renewable fats or fatty acids into alkanes is a powerful measure to address energy and environmental crises. Molybdenum carbide-based catalysts are promising due to their platinum-like noble metal electronic properties. In this paper, Mo2C catalysts were prepared by one-step carbonization of amine molybdenum oxide (AMO) precursors using diamines with different carbon chain lengths as ligands. The physical and chemical properties and the HDO catalytic activity of the catalysts were investigated. The results indicate that as the carbon chain of diamines in the precursor increases, the carbon content of the catalysts in the surface and bulk phase increases. The Mo2C-12 catalyst exhibited excellent catalytic performance, with a palmitic acid conversion rate of 100% and an alkane selectivity of 96.6%, which are attributed to the smallest particle size, largest pore size, and synergistic effect of carbon. This work provides a simple and safe method for regulating the surface properties of Mo2C catalysts. [ABSTRACT FROM AUTHOR]

Tungsten carbide-based materials have good deoxygenation activity in the conversion of biomass. In this paper, catalysts with different nickel–tungsten carbide species were prepared by tuning the reduction temperature and Ni loading, and the effects of these different tungsten carbide species in the conversion of jatropha oil were studied. XRD, XPS, TEM, HRTEM, Raman, H2-TPR, ICP-AES were used to characterize the catalysts. The results suggested that metallic W was gradually carburized to W2C species, and W2C species was further carburized to WC species with the increase in reduction temperature and Ni loading. The obtained 10Ni10W/AC-700 catalyst exhibited outstanding catalytic performance with 99.7% deoxygenation rate and 94.5% C15-18 selectivity, which were attributed to the smallest particle size, the best dispersion, the most exposed active sites, and the synergistic effect of Ni, W2C and WC species. [ABSTRACT FROM AUTHOR]

Pure Ni12P5/SiO2 and pure Ni2P/SiO2 catalysts were obtained by adjusting the Ni and P molar ratios, while Ni/SiO2 catalyst was prepared as a reference against which the deoxygenation pathways of palmitic acid were investigated. The catalysts were characterized by N2 adsorption, X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), transmission election microscopy (TEM), infrared spectroscopy of pyridine adsorption (Py-IR), H2-adsorption and temperature-programmed desorption of hydrogen (H2-TPD). The crystallographic planes of Ni(111), Ni12P5(400), Ni2P(111) were found mainly exposed on the above three catalysts, respectively. It was found that the deoxygenation pathway of palmitic acid mainly proceeded via direct decarboxylation (DCO2) to form C15 on Ni/SiO2. In contrast, on the Ni12P5/SiO2 catalyst, there were two main competitive pathways producing C15 and C16, one of which mainly proceeded via the decarbonylation (DCO) to form C15 accompanying water formation, and the other pathway produced C16 via the dehydration of hexadecanol intermediate, and the yield of C15 was approximately twofold that of C16. Over the Ni2P/SiO2 catalyst, two main deoxygenation pathways formed C15, one of which was mainly the DCO pathway and the other was dehydration accompanying the hexadecanal intermediate and then direct decarbonylation without water formation. The turn over frequency (TOF) followed the order: Ni12P5/SiO2 > Ni/SiO2 > Ni2P/SiO2. [ABSTRACT FROM AUTHOR]