Search

In this study, an antimicrobial plant-based film was developed using pectin which is incorporated by different percentages of nanoemulsified trans-cinnamaldehyde (TC). The nanoemulsion of TC was incorporated into pectin to form films containing TC at concentrations of 5.00%, 3.33%, 2.50% and 2.00% (w/w). The nanoemulsion of TC was formed by using soybean lecithin as an emulsifier and had a zeta potential of −57 mV and an average size of 106 nm. The analysis showed that the addition of emulsified TC enhanced the light barrier properties, but the opacity of films increased due to the increase in light absorption, coalescence, and light-scattering phenomena. Films containing the nanoemulsion of TC exhibited reduced tensile strength and elasticity due to structural discontinuities in the film network caused by the presence of the nanoemulsion of TC, while elongation at break increased for TC concentrations of 2.50% and 2.00%. The films retained their infrared spectra, but their thermal stability decreased slightly. The incorporation of TC nanoemulsion significantly reduced the glass transition temperature, as shown by the differential scanning calorimetry analysis. The active films showed antimicrobial activity against Listeria innocua and Escherichia coli, indicating their potential for various food applications. [ABSTRACT FROM AUTHOR]

Several plants rich in phenolic compounds have many uses in the food and pharmaceutical fields. However, after extraction, these active biomolecules are susceptible to degradation. Microencapsulation is a possible solution to prevent this rapid degradation. In this study, phenolic compounds from the okra Abelmoschus esculentus L's leaves, fruits and seeds were extracted using microwave-assisted extraction and then microencapsulated via the spray drying technique using maltodextrin combined with pectin (in a ratio of 10:1) as an encapsulation material. The total phenolic content, DPPH scavenging and antimicrobial activities of okra extracts and encapsulated samples were evaluated to verify the encapsulation efficiency. Particle size distribution determination and scanning electron microscopy of the microcapsules were also carried-out. The ethanolic leaf extract showed higher significant levels of total phenolic compounds (162.46 ± 4.48 mg GAE/g DW), and anti-oxidant (75.65%) and antibacterial activities compared to those of other aqueous and ethanolic extracts from fruits and seeds. Furthermore, the spray-dried ethanolic leaf extract had the highest total phenolic content. However, the encapsulated ethanolic fruit extract had the highest percentage of DPPH scavenging activity (30.36% ± 1.49). In addition, antibacterial activity measurements showed that the addition of ethanolic and aqueous seed microcapsules provided a significant zone of inhibition against the bacterium Brochotrix thermosphacta (38 mm and 30 mm, respectively). Okra aqueous leaf microcapsules showed the smallest Sauter mean diameter values (7.98 ± 0.12 µm). These data are applicable for expanding the use of okra leaves, fruits and seeds as food additives and/or preservatives in the food industry. [ABSTRACT FROM AUTHOR]

The current study investigates the formation of microencapsulated geraniol powder, with the exopolysaccharide EPS-K1B3 produced by Halomonas caseinilytica K1, as wall material, using spray-drying. Evaluation of the antimicrobial activity of the functional emulsions, prepared at either pH 5 or pH 7, was carried out against Gram-positive (Listeria innocua (ATCC 33090)) and Gram-negative (Escherichia coli (DSM682)) bacterial strains. Results showed prolonged antimicrobial efficacy until 30 days of incubation for geraniol microcapsules compared to wet geraniol emulsions, which could confirm the ability of the spray-drying process to protect encapsulated geraniol for a longer period. The highest antimicrobial efficacy of geraniol microcapsules was observed against L. innocua at pH 5. Therefore, the influence of pH on the functional property of geraniol microcapsules could be highlighted beside the targeted bacterial strain. [ABSTRACT FROM AUTHOR]

This study aimed to improve the physical, mechanical, and biological properties of a monolayer pectin (P) film containing nanoemulsified trans-Cinnamaldehyde (TC) by incorporating it between inner and outer layers of ethylcellulose (EC). The nanoemulsion had an average size of 103.93 nm and a zeta potential of −46 mV. The addition of the nanoemulsion increased the opacity of the film, reduced its moisture absorption capacity, and improved its antimicrobial activity. However, the tensile strength and elongation at break of the pectin films decreased after the incorporation of nanoemulsions. Multilayer films (EC/P/EC) showed a higher resistance to breaking and better extensibility compared to monolayer films. The antimicrobial activity of both mono and multilayer films was effective in inhibiting the growth of foodborne bacteria during storage of ground beef patties at 8 °C for 10 days. This study suggests that biodegradable antimicrobial multilayer packaging films can be effectively designed and applied in the food packaging industry. [ABSTRACT FROM AUTHOR]

Phenolic compounds in olive leaves have an excellent antioxidant activity and good antimicrobial properties. These bioactive molecules have beneficial properties for health, arousing great scientific and commercial interest. This study reports lyophilized olive leaf extracts (OLE) encapsulated by spray-drying using maltodextrins, maltodextrins–pectin and maltodextrins–gum Arabic as encapsulating agents. Lyophilized OLE were collected from two varieties cultivated in a harsh pedo-climatic conditions of the arid region of Tunisia. The effects of the genetic factor and the different encapsulating agents on the physicochemical properties of microcapsules and their behavior during storage, as well as their antimicrobial activities, were studied. Microcapsules successfully passed heat treatment and storage conditions and their antimicrobial activities were preserved. The encapsulating agent combination improved the encapsulation efficiency and the product yield in Zarrazi variety compared to Dhokar one. In addition, Dhokar variety microparticles showed the best heat stability at 4 and 25 °C after 90 days of storage and the higher inhibition percent against bacteria. The results of the present study evidenced that the best conditions for OLE encapsulation were obtained when the maltodextrins–pectin and maltodextrins–gum Arabic were combined to form a hybrid coating material. [ABSTRACT FROM AUTHOR]

Two plant-based emulsifiers, soybean lecithin and pea protein isolate, were studied for their emulsifying and encapsulating capacities of an antimicrobial molecule, trans-cinnamaldehyde (TC), at two different pH values, three and seven, and after drying with two different techniques, spray-drying and freeze-drying. To characterize the obtained capsules, various physicochemical tests were conducted to examine particle size, encapsulation efficiency, thermal and moisture stability, and powder morphology. The spray-dried (SD) and freeze-dried (FD) powders had an average particle size of 8.35 µm and 144.49 µm, respectively. The SD powders showed similar encapsulation efficiency (EE) for soybean lecithin and pea protein isolate with an average value of 95.69%. On the other hand, the FD powders had lower EE compared to SD powders, with an average of 58.01% for lecithin-containing powders and 83.93% for pea-protein-containing powders. However, the water content of FD powders (2.83%) was lower than that of SD powders (4.72%). The powders prepared at pH 3 showed better thermal stability. Morphological analysis showed spherical particles for SD powders and irregular shapes for FD powders. Nanoemulsions as well as dried powders showed interesting antimicrobial activities against Escherichia coli and Listeria innocua, confirming their potential use as natural preservatives in foods. [ABSTRACT FROM AUTHOR]

The global demand for safe and healthy food with minimal synthetic preservatives is continuously increasing. Some natural food antimicrobials with strong antimicrobial activity and low toxicity have been considered as alternatives for current commercial food preservatives. Nonetheless, these natural food antimicrobials are hardly applied directly to food products due to issues such as food flavor or bioavailability. Recent advances in microencapsulation technology have the potential to provide stable systems for these natural antibacterials, which can then be used directly in food matrices. In this review, we focus on the application of encapsulated natural antimicrobial agents, such as essential oils, plant extracts, bacteriocins, etc., as potential food preservatives to extend the shelf-life of food products. The advantages and drawbacks of the mainly used encapsulation methods, such as molecular inclusion, spray drying, coacervation, emulsification, supercritical antisolvent precipitation and liposome and alginate microbeads, are discussed. Meanwhile, the main current applications of encapsulated antimicrobials in various food products, such as meat, dairy and cereal products for controlling microbial growth, are presented. [ABSTRACT FROM AUTHOR]

The global demand for safe and healthy food with minimal synthetic preservatives is continuously increasing. Natural food antimicrobials and especially essential oils (EOs) possess strong antimicrobial activities that could play a remarkable role as a novel source of food preservatives. Despite the excellent efficacy of EOs, they have not been widely used in the food industry due to some major intrinsic barriers, such as low water solubility, bioavailability, volatility, and stability in food systems. Recent advances in nanotechnology have the potential to address these existing barriers in order to use EOs as preservatives in food systems at low doses. Thus, in this review, we explored the latest advances of using natural actives as antimicrobial agents and the different strategies for nanoencapsulation used for this purpose. The state of the art concerning the antibacterial properties of EOs will be summarized, and the main latest applications of nanoencapsulated antimicrobial agents in food systems will be presented. This review should help researchers to better choose the most suitable encapsulation techniques and materials. [ABSTRACT FROM AUTHOR]

Food packaging plays a fundamental role in the modern food industry as a main process to preserve the quality of food products from manufacture to consumption. New food packaging technologies are being developed that are formulated with natural compounds by substituting synthetic/chemical antimicrobial and antioxidant agents to fulfill consumers' expectations for healthy food. The strategy of incorporating natural antimicrobial compounds into food packaging structures is a recent and promising technology to reach this goal. Concepts such as "biodegradable packaging", "active packaging", and "bioactive packaging" currently guide the research and development of food packaging. However, the use of natural compounds faces some challenges, including weak stability and sensitivity to processing and storage conditions. The nano/microencapsulation of these bioactive compounds enhances their stability and controls their release. In addition, biodegradable packaging materials are gaining great attention in the face of ever-growing environmental concerns about plastic pollution. They are a sustainable, environmentally friendly, and cost-effective alternative to conventional plastic packaging materials. Ultimately, a combined formulation of nano/microencapsulated antimicrobial and antioxidant natural molecules, incorporated into a biodegradable food packaging system, offers many benefits by preventing food spoilage, extending the shelf life of food, reducing plastic and food waste, and preserving the freshness and quality of food. The main objective of this review is to illustrate the latest advances in the principal biodegradable materials used in the development of active antimicrobial and antioxidant packaging systems, as well as the most common nano/microencapsulated active natural agents incorporated into these food-packaging materials. [ABSTRACT FROM AUTHOR]