Search

This study aimed to determine the characteristics of accelerations and angular velocities obtained by an inertial measurement unit (IMU) attached to a cane between older people with and without physical frailty. Community-dwelling older people walked at a comfortable speed using a cane with a built-in IMU. Physical frailty was assessed using exercise-related items extracted from the Kihon Check List. The efficacy of five machine learning models in distinguishing older people with physical frailty was investigated. This study included 48 older people, of which 24 were frail and 24 were not. Compared with the non-frail participants, the older people with physical frailty had a small root mean square value in the vertical and anteroposterior directions and angular velocity in the anteroposterior direction (p < 0.001, r = 0.36; p < 0.001, r = 0.29; p < 0.001, r = 0.30, respectively) and a large mean power frequency value in the vertical direction (p = 0.042, r = 0.18). The decision tree model could most effectively classify physical frailty, with an accuracy, F1 score, and area under the curve of 78.6%, 91.8%, and 0.81, respectively. The characteristics of IMU-attached cane usage by older adults with physical frailty can be utilized to effectively evaluate and determine physical frailty in their usual environments. [ABSTRACT FROM AUTHOR]

Long-range networks, renowned for their long-range, low-power communication capabilities, form the backbone of many Internet of Things systems, enabling efficient and reliable data transmission. However, detecting tampered frequency signals poses a considerable challenge due to the vulnerability of LoRa devices to radio-frequency interference and signal manipulation, which can undermine both data integrity and security. This paper presents an innovative method for identifying tampered radio frequency transmissions by employing five sophisticated anomaly detection algorithms—Local Outlier Factor, Isolation Forest, Variational Autoencoder, traditional Autoencoder, and Principal Component Analysis within the framework of a LoRa-based Internet of Things network structure. The novelty of this work lies in applying image-based tampered frequency techniques with these algorithms, offering a new perspective on securing LoRa transmissions. We generated a dataset of over 26,000 images derived from real-world experiments with both normal and manipulated frequency signals by splitting video recordings of LoRa transmissions into frames to thoroughly assess the performance of each algorithm. Our results demonstrate that Local Outlier Factor achieved the highest accuracy of 97.78%, followed by Variational Autoencoder, traditional Autoencoder and Principal Component Analysis at 97.27%, and Isolation Forest at 84.49%. These findings highlight the effectiveness of these methods in detecting tampered frequencies, underscoring their potential for enhancing the reliability and security of LoRa networks. [ABSTRACT FROM AUTHOR]

Situational awareness detection and characterization of mental states have a vital role in medicine and many other fields. An electroencephalogram (EEG) is one of the most effective tools for identifying and analyzing cognitive stress. Yet, the measurement, interpretation, and classification of EEG sensors is a challenging task. This study introduces a novel machine learning-based approach to assist in evaluating situational awareness detection using EEG signals and spiking neural networks (SNNs) based on a unique spike continuous-time neuron (SCTN). The implemented biologically inspired SNN architecture is used for effective EEG feature extraction by applying time–frequency analysis techniques and allows adept detection and analysis of the various frequency components embedded in the different EEG sub-bands. The EEG signal undergoes encoding into spikes and is then fed into an SNN model which is well suited to the serial sequence order of the EEG data. We utilize the SCTN-based resonator for EEG feature extraction in the frequency domain which demonstrates high correlation with the classical FFT features. A new SCTN-based 2D neural network is introduced for efficient EEG feature mapping, aiming to achieve a spatial representation of each EEG sub-band. To validate and evaluate the performance of the proposed approach, a common, publicly available EEG dataset is used. The experimental results show that by using the extracted EEG frequencies features and the SCTN-based SNN classifier, the mental state can be accurately classified with an average accuracy of 96.8% for the common EEG dataset. Our proposed method outperforms existing machine learning-based methods and demonstrates the advantages of using SNNs for situational awareness detection and mental state classifications. [ABSTRACT FROM AUTHOR]

The manuscript presents the applicability of the Gumbel distribution in the frequency analysis of extreme events in hydrology. The advantages and disadvantages of using the distribution are highlighted, as well as recommendations regarding its proper use. A literature review was also carried out regarding the methods for estimating the parameters of the Gumbel distribution in hydrology. Thus, for the verification of the methods, case studies are presented regarding the determination of the maximum annual flows and precipitations using nine methods for estimating the distribution parameters. The influence of the variability of the observed data lengths on the estimation of the statistical indicators, the estimation of the parameters, and the quantiles corresponding to the field of small exceedance probabilities (p < 1%) is also highlighted. In each case, the results are analyzed compared to those obtained with the Generalized Extreme Value distribution, the four-parameter Burr distribution, and the five-parameter Wakeby distribution estimated using the L-moments method. The results of the case studies highlight and reaffirm the statistical, mathematical, and hydrological recommendations regarding the avoidance of applying the Gumbel distribution in flood frequency analysis and its use with reservations in the case of maximum precipitation analysis, especially when the statistical indicators of the analyzed data are not close to the characteristic ones and unique to the distribution. [ABSTRACT FROM AUTHOR]

This paper proposes a novel method to estimate rainfall intensity by analyzing the sound of raindrops. An innovative device for collecting acoustic data was designed, capable of blocking ambient noise in rainy environments. The device was deployed in real rainfall conditions during both the monsoon season and non-monsoon season to record raindrop sounds. The collected raindrop sounds were divided into 1 s, 10 s, and 1 min intervals, and the performance of rainfall intensity estimation for each segment length was compared. First, the rainfall occurrence was determined based on four extracted frequency domain features (average of dB, frequency-weighted average of dB, standard deviation of dB, and highest frequency), followed by a quantitative estimation of the rainfall intensity for the periods in which rainfall occurred. The results indicated that the best estimation performance was achieved when using 10 s segments, corresponding to the following metrics: accuracy: 0.909, false alarm ratio: 0.099, critical success index: 0.753, precision: 0.901, recall: 0.821, and F1 score: 0.859 for rainfall occurrence classification; and root mean square error: 1.675 mm/h, R 2 : 0.798, and mean absolute error: 0.493 mm/h for quantitative rainfall intensity estimation. The proposed small and lightweight device is convenient to install and manage and is remarkably cost-effective compared with traditional rainfall observation equipment. Additionally, this compact rainfall acoustic collection device can facilitate the collection of detailed rainfall information over vast areas. [ABSTRACT FROM AUTHOR]

Current challenges in collecting and analyzing subway vibration data include the absence of standardized data collection methods, limitations in data analysis techniques, and an unclear understanding of the effects of geological conditions on vibrations. This study investigated vertical vibrations of tunnel walls and the ground above tunnels under different geological conditions of soft soil and rock strata at horizontal distances of 0, 15 m, and 30 m from the tunnel center line during train passages. The collected data underwent Fourier transformation and 1/3 octave processing to extract spectral characteristics and analyze transmission losses across different frequency bands. Our findings revealed two vibration peaks in the transmission process for both soft soil and rock formation geology. Specifically, high-frequency vibrations in soft soil experienced greater attenuation when transmitted from the tunnel wall to the ground at 0 m, while low-frequency vibrations in rock formations showed greater attenuation. We also observed a vibration amplification phenomenon at 15 m under soft soil geology conditions. Although low-frequency vibrations below 12.5 Hz showed slight attenuation within a 30 m test distance under both geological conditions, vibrations above 40 Hz experienced significant attenuation. These results offer valuable insights for reducing vibrations in subway superstructures and planning subway lines under diverse geological conditions. Furthermore, this study serves not only as a basis for mitigating vibrations in metro spans and designing metro lines in various geological contexts but also establishes a scientific foundation for future research. [ABSTRACT FROM AUTHOR]

This paper focuses on the modeling and analysis of a four-groove passenger car tire, size 235/55R19, using finite element analysis. The Mooney–Rivlin material model is employed to define the hyperelastic behavior of the tire rubber compounds for all solid elements. The tire rim is modeled as a rigid body using aluminum alloy material, and the beads are modeled as beam elements using steel material. The tire model is validated in both static and dynamic domains through several simulations and is compared to published measured data. The tire is validated using footprint and vertical stiffness tests in the static domain. In the static footprint test, a steady-state vertical load is applied, and the tire–road contact area is computed. In the vertical stiffness test, a ramp vertical load is applied, and the tire's vertical displacement is measured to calculate the tire's vertical stiffness. In the dynamic domain, the tire is validated using drum-cleat and cornering tests. In the drum-cleat test, a drum with a 2.5 m diameter and a cleat with a 15 mm radius is used to excite the tire structure and obtain the frequency of the vertical and longitudinal first modes of vibration, that is, by applying the fast Fourier transformation (FFT) of the vertical and longitudinal reaction forces at the tire center. In addition to this test, the tire model is pre-steered on a flat surface with a two-degree slip angle and subjected to a steady state linear speed of 10 km/h to predict the cornering force and compute the cornering stiffness. In addition, the effect of tire longitudinal speed on the rolling resistance coefficient is then predicted at zero slip angle using the ISO 28580 rolling resistance test. The findings of this research work provide insights into passenger car tire–road interaction analysis and will be further used to perform tire rubber compound material model sensitivity analysis. [ABSTRACT FROM AUTHOR]

This study focuses on investigating the behavior of slider–crank mechanisms with different bearing failures using a vibration analysis technique. The reliability and lifespan of bearings are crucial for such mechanisms, which convert rotary motion to reciprocating motion. Previous research primarily addressed ball-bearing failures, neglecting needle bearings due to their specific applications. To bridge this gap, our experimental setup integrated both roller and ball bearings within a slider–crank mechanism. Vibration data were collected during normal operation, as well as under failure conditions of the ball and roller bearings. By analyzing the vibration signatures during simultaneous multiple failures, we gained insights into the nature of vibrations in the system. Furthermore, a mathematical model based on Hertzian contact was employed to calculate the theoretical frequency of ball bearings; however, due to the variable motion of the needle bearing, a novel mathematical model was proposed to estimate the defective impulse frequency, considering the inter-impact time between two impacts. The experimental results were compared with the healthy crank mechanism setup to draw meaningful conclusions. This research contributes to a comprehensive understanding of bearing failures in slider–crank mechanisms and provides valuable insights for designing reliable and long-lasting systems. [ABSTRACT FROM AUTHOR]

(1) Background: Vibrotactile stimulation has been studied for tremor, but there is little evidence for Essential Tremor (ET). (2) Methods: This research employed a dataset from a previous study, with data collected from 18 individuals subjected to four vibratory stimuli. To characterise tremor changes before, during, and after stimuli, time and frequency domain features were estimated from the signals. Correlation and regression analyses verified the relationship between features and clinical tremor scores. (3) Results: Individuals responded differently to vibrotactile stimulation. The 250 Hz stimulus was the only one that reduced tremor amplitude after stimulation. Compared to the baseline, the 250 Hz and random frequency stimulation reduced tremor peak power. The clinical scores and amplitude-based features were highly correlated, yielding accurate regression models (mean squared error of 0.09). (4) Conclusions: The stimulation frequency of 250 Hz has the greatest potential to reduce tremors in ET. The accurate regression model and high correlation between estimated features and clinical scales suggest that prediction models can automatically evaluate and control stimulus-induced tremor. A limitation of this research is the relatively reduced sample size. [ABSTRACT FROM AUTHOR]

In drilling small holes with diameters of 1 mm or less, minute clogging and twining of chips or the adhesion of the workpiece material can become factors in causing breakages of the drill bit; moreover, it can be difficult to identify the machining state. Acoustic emission (AE) sensing is a nondestructive inspection technique that measures the elastic-stress waves that are generated when a material is deformed and fractured. AE sensing permits highly sensitive measurements to be made without changing the rigidity of the experimental system, unlike force sensing of cutting resistance, etc. In the present study, attempts were made to identify the machining state and tool wear, and to predict abnormalities in small-diameter drilling by using the change in the frequency of AE signal waveforms arising from deformation and fracture. It was shown that it is possible to predict the breakage of the drill bit by detecting high-frequency AE signals at about 1 MHz, caused by the adhesion of the workpiece material. In addition, a correlation map of the AE frequency spectrum for identifying the machining state in a drilling operation is suggested. [ABSTRACT FROM AUTHOR]

The regeneration of highly dynamic driving maneuvers on vehicle test benches is challenging due to several influences, such as power losses, vibrations in the overall system that involves the vehicle with the test bench, uncertainties in the model parameterization, and time delays from both the test bench and the measurement systems. In order to improve the dynamic response of the vehicle test bench and to overcome system disturbances, we employed different types of control algorithms for a mechanical multi-mass model. First, those controllers are extensively investigated in the frequency domain to analyze their stability and evaluate the noise rejection quality. Then, the expectations from the frequency analysis are confirmed in a time-domain simulation. Furthermore, sensitivity analysis tests were conducted to evaluate each controller's robustness against the modeling parameters' uncertainty. The linear quadratic controller with integral action demonstrated the best compromise between performance and robustness. [ABSTRACT FROM AUTHOR]

The recent growth in maturity of paraffin-based hybrid propulsion systems reassesses the possibility to design an alternative Mars Ascent Vehicle (MAV) propelled by a European hybrid motor. As part of the Mars Sample Return (MSR) campaign, a Hybrid MAV would present potential advantages over the existent solid concept funded by NASA through offering increased performance, higher thermal resilience, and lower Gross Lift-Off Mass (GLOM). This study looks at the preliminary design of a two-stage European MAV equipped with HyImpulse's hybrid engine called the Hyplox10. This Hybrid MAV utilizes the advantages inherent to this type of propulsion to propose an alternative MAV concept. After a careful analysis of previous MAV architectures from the literature, the vehicle is sized with all its components such as the propellant tanks and nozzle, and the configuration of the rocket is established. A detailed design of the primary structure is addressed. This is followed by a Finite Element Analysis (FEA), evaluating the structural integrity under the challenging conditions of Entry, Descent, and Landing (EDL) on Mars, considering both static and dynamic analyses. The outcome is a Hybrid MAV design that demonstrates feasibility and resilience in the harsh Martian environment, boasting a GLOM of less than 300 kg. [ABSTRACT FROM AUTHOR]

Based on the Hodgkin–Huxley theory, this paper establishes several nonlinear system models, analyzes the models' stability, and studies the conditions for repetitive discharge of neuronal membrane potential. Our dynamic analysis showed that the main channel currents (the fast transient sodium current, the potassium delayed rectifier current, and the fixed leak current) of a neuron determine its dynamic properties and that the GHK formula will greatly widen the stimulation current range of the repetitive discharge condition compared with the Nernst equation. The model including the change in ion concentration will lead to spreading depression (SD)-like depolarization, and the inclusion of a Na-K pump will weaken the current stimulation effect by decreasing the extracellular K accumulation. The results indicate that the Hodgkin–Huxley model is suitable for describing the response to initial stimuli, but due to changes in ion concentration, it is not suitable for describing the response to long-term stimuli. [ABSTRACT FROM AUTHOR]

The frequency analysis of maximum flows represents a direct method to predict future flood risks in the face of climate change. Thus, the correct use of the tools (probability distributions and methods of estimating their parameters) necessary to carry out such analyzes is required to avoid possible negative consequences. This article presents four probability distributions from the generalized Beta families, using the L- and LH-moments method as parameter estimation. New elements are presented regarding the applicability of Dagum, Paralogistic, Inverse Paralogistic and the four-parameter Burr distributions in the flood frequency analysis. The article represents the continuation of the research carried out in the Faculty of Hydrotechnics, being part of larger and more complex research with the aim of developing a normative regarding flood frequency analysis using these methods. According to the results obtained, among the four analyzed distributions, the Burr distribution was found to be the best fit model because the theoretical values of the statistical indicators calibrated the corresponding values of the observed data. Considering the existence of more rigorous selection criteria, it is recommended to use these methods in the frequency analysis. [ABSTRACT FROM AUTHOR]

Meteorological drought is a continuous spatiotemporal phenomenon that poses a serious threat to water resource security. Dynamic evolution and multivariable frequency analysis of meteorological drought are important for effective drought mitigation and risk management. Therefore, this study aims to analyze meteorological drought events in northwestern China between 1960 and 2018 based on the standardized precipitation evapotranspiration index (SPEI) through a three-dimensional identification method. This study investigates the meteorological drought dynamic evolution on different time and space scales and evaluates the frequency analysis considering the spatiotemporal variability based on Copula. The results show that SPEI presents an upward trend in Northwestern China. A trend towards increased humidity is observed in arid regions, contrasted by a trend towards aridification in semi-arid and semi-humid areas, indicating that the spatial distribution of drought in the study area tends towards homogenization. The possibility of high-intensity drought events occurring in the same area was relatively low, whereas low-intensity drought events were frequent. Additionally, this study analyzes the dynamic migration process of individual drought events from a three-dimensional perspective. Neglecting any one drought variable could significantly underestimate the occurring probability of severe drought events. Therefore, a multivariable frequency analysis considering the spatiotemporal variability plays a crucial role in the formulation of drought prevention and mitigation strategies, as well as drought forecasting. [ABSTRACT FROM AUTHOR]

This study examines all of the equations necessary to derive the parameters for seven probability distributions of three parameters typically used in flood frequency research, namely the Pearson III (PE3), the generalized extreme value (GEV), the Weibull (W3), the log-normal (LN3), the generalized Pareto Type II (PG), the Rayleigh (RY) and the log-logistic (LL3) distributions, using the higher-order linear moments method (LH-moments). The analysis represents the expansion of previous research whose results were presented in previous materials, and is part of hydrological research aimed at developing a standard for calculating maximum flows based on L-moments and LH-moments. The given methods for calculating the parameters of the examined distributions are used to calculate the maximum flows on Romania's Prigor River. For both methods, the criterion for selecting the most suitable distribution is represented by the diagram of the L-skewness–L-kurtosis and LH-skewness–LH-kurtosis. The results for Prigor River show that the PG distribution is the best model for the L-moments method, the theoretical values of the statistical indicators being 0.399 and 0.221. The RY distribution is the best model for the LH-moments technique, with values of 0.398 and 0.192 for the two statistical indicators. [ABSTRACT FROM AUTHOR]

Background. Spatter formation at melt pool swellings at the keyhole rear wall is a major issue for laser deep penetration welding at speeds beyond 8 m/min. A gas nozzle directed towards the keyhole, that supplies shielding gas locally, is advantageous in reducing spatter formation due to its simple utilization. However, the relationship between local gas flow, laser spot size, and the resulting effects on spatter formation at high welding speeds up to 16 m/min are not yet fully understood. Methods. The high-alloy steel AISI 304 (1.4301/X5CrNi18-10) was welded with laser spot sizes of 300 μm and 600 μm while using a specially designed gas nozzle directed to the keyhole. Constant welding depth was ensured by Optical Coherence Tomography (OCT). Spatter formation was evaluated by precision weighing of samples. Subsequent processing of high-speed images was used to evaluate spatter quantity, size, and velocity. The keyhole oscillation was determined by Fast Fourier Transform (FFT) analysis. Tracking the formation of melt pool swellings at the keyhole rear wall provided information on the upward melt flow velocity. Results. The local gas flow enabled a significant reduction in the number of spatters and loss of mass for both laser spot sizes and indicated an effect on surface tension by shielding the processing zone from the ambient atmosphere. The laser spot size affected the upward melt flow velocity and spatter velocity. [ABSTRACT FROM AUTHOR]

DC–DC buck converters have become prominent components for energy optimization in power systems, and how to improve control performances is a challenging issue to be addressed. In this paper, we aim to investigate the harmonic problem of sliding mode (SM) controlled buck converters imposed by the often-ignored unmodeled dynamics of the Hall sensor. The unified mathematical model of the whole system is established by combining the SM controller, the buck converter, and the Hall sensor, where the signal loss in the transmission process of the whole closed-loop control system is considered. Based on the Lyapunov stability theorem, the SM controller is designed to guarantee system stability, as well as to deduce the stable working areas and the tuned controller parameters. Furthermore, we introduce the descriptive function (DF) approach to investigate the influence of the unmodeled dynamics of the Hall sensor on the system harmonics in the frequency domain, which can deduce the relationship between the amplitude-frequency characteristics of the output signal and the Hall sensor. Simulations and experiments validate this paper. [ABSTRACT FROM AUTHOR]

This study presents a comprehensive analysis of heatwaves in mainland Portugal from 1 October 1980 to 30 September 2021 (41 hydrological years). It addresses a research gap by providing an updated assessment using high-resolution reanalysis daily minimum and maximum temperature data (Tmin and Tmax) from the gridded ERA5-Land dataset, overcoming the lack of publicly available daily temperature records. To assess the representation of the previous dataset, nine different grid-point locations across the country were considered. By comparing monthly ERA5-Land temperature data to ground-based records from the Portuguese Met Office, a monthly validation of the data was conducted for the longest common period, demonstrating good agreement between the two datasets. The heatwave magnitude index (HWMI) was employed to establish the temperature thresholds and thus identify heatwaves (defined as three or more consecutive days above the threshold). With over 640 Tmin heatwave days recorded at each of the nine ERA5-Land grid-points, data analysis revealed a discernible upward trend in Tmin heatwaves. The grid-point situated in the capital city's urban area, i.e., Lisbon, exhibited the highest number of Tmin heatwave days. With an average of more than 800 Tmax heatwave days over the 41-year period, the northern and interior regions of Portugal had the greatest number of occurrences, reaching up to 916. A kernel rate estimation method was applied to further investigate the annual frequency of Tmin and Tmax heatwave occurrences. Results exhibited clear temperature changes, with a widespread increase in the number of heatwave days over the past two decades, particularly for Tmax. In summary, the occurrence of this phenomenon displayed significant spatial variations, with the southern interior and coastal grid-points experiencing a greater increase in annual Tmax heatwave days, rising from 10 to 30 between 2018 and 2019. [ABSTRACT FROM AUTHOR]

The defense against urban pluvial flooding relies on the prediction of rainfall frequency, intensity, and long-term trends. The influence of the choice of the complete time series or the wet-day series on the rain analyses remains unclear, which affects the adaptive strategies for the old industrial cities such as Changchun in Northeastern China, with the outdated combined sewer systems. Based on the data from the two separate weather stations, four types of distributions were compared for analyzing the complete daily precipitation series, and their fitting accuracy was found in decreasing order of Pearson III, Pareto–Burr–Feller distribution (PBF), generalized extreme value (GEV), and Weibull. The Pearson III and the PBF probability distribution functions established based on the complete time series were found to be at least 458% and 227%, respectively, more accurate in fitting with the consecutive observations than those built from the wet-day-only series, which did not take account of the probability of the dry periods between the rain events. The rain depths of the return periods determined from the wet-day-only series might be over-predicted by at least 76% if the complete daily series were regarded as being more closely representative of the real condition. A clear threshold of 137 days was found in this study to divide the persistent or autocorrelated time series from the antipersistent or independent time series based on the climacogram analysis, which provided a practical way for independence determination. Due to the significant difference in the rain analyses established from the two time series, this work argued that the complete daily series better represented the real condition and, therefore, should be used for the frequency analysis for flood planning and infrastructure designs. [ABSTRACT FROM AUTHOR]

In this study, we developed a data-driven frequency domain analysis method for rotor systems using the NARX (Nonlinear Auto-Regressive with eXternal input) model established by system vibration signals. We propose a model-based index of fault features calculated in a multi-frequency range to facilitate condition monitoring of rotor systems. Four steps are included in the proposed method. Firstly, displacement vibration signals are collected at multiple monitored rotating speeds. Secondly, the collected signals are processed as output data and the corresponding input data is generated. Then, NARX models are developed with input and output data to characterize the rotor system. Finally, the NRSF (Nonlinear Response Spectrum Function)-based nonlinear fault index is calculated and compared to the healthy condition. An experimental application to the misaligned rotor system is also demonstrated to verify its effectiveness. Our results indicate that the value of the index directly reflects the severity of the misaligned fault. [ABSTRACT FROM AUTHOR]

A direct way to estimate the likelihood and magnitude of extreme events is frequency analysis. This analysis is based on historical data and assumptions of stationarity, and is carried out with the help of probability distributions and different methods of estimating their parameters. Thus, this article presents all the relations necessary to estimate the parameters with the LH-moments method for the family of distributions defined only by the quantile function, namely, the Wakeby distribution of 4 and 5 parameters, the Lambda distribution of 4 and 5 parameters, and the Davis distribution. The LH-moments method is a method commonly used in flood frequency analysis, and it uses the annual series of maximum flows. The frequency characteristics of the two analyzed methods, which are both involved in expressing the distributions used in the first two linear moments, as well as in determining the confidence interval, are presented. The performances of the analyzed distributions and the two presented methods are verified in the following maximum flows, with the Bahna river used as a case study. The results are presented in comparison with the L-moments method. Following the results obtained, the Wakeby and Lambda distributions have the best performances, and the LH-skewness and LH-kurtosis statistical indicators best model the indicators' values of the sample (0.5769, 0.3781, 0.548 and 0.3451). Similar to the L-moments method, this represents the main selection criterion of the best fit distribution. [ABSTRACT FROM AUTHOR]

The paper presents the results of static and dynamic experimental tests conducted on historical heritage structures and sculptures. In recent years, there was an increasing need to address the behaviour of these types of structures due to several reasons. Diagnosing the actual condition of a historical structure involves not only identifying the cause of a detected defect, but also determining its impact and assessing whether the structure can continue to perform safely. This article utilises unconventional loading methods to generate measurable mechanical responses. In one case, a lifting procedure is employed to study strains in a composite structure, while in another example, the mass and movement of people are used as a form of loading. Proof load tests conducted on a monumental sculpture allowed for the determination of load distribution among its heterogeneous structural components, namely a bronze shell and an iron reinforcing frame. Furthermore, the static and dynamic loading of a ceiling supported by a masonry vault demonstrated its ability to withstand anticipated loads resulting from unconventional use as a temporary exhibition space. [ABSTRACT FROM AUTHOR]

Frequency analysis has long been an important theme of hydrology research. Although meteorological techniques (physical approaches) such as radar nowcasting, remote sensing, and forecasting heavy rainfall events using meteorological simulation models are quite effective for urban disaster prevention, statistical and stochastic theories that include frequency analysis, which are usually used in flood control plans, are also valuable for flood control plans for disaster prevention. Master plans for flood control projects in urban areas often use the concept of T-year hydrological values with a T-year return period. A flood control target is a "landside area that is safe against heavy rainfall or floods with a return period of T years". This review emphasizes discussions of parameter estimation of stochastic models and selection of optimal statistical models, which include evaluation of goodness-of-fit techniques of statistical models. Based on those results, the authors criticize Japanese standard procedures recommended by the central government. Consistency between parameter estimation and evaluation of goodness-of-fit is necessary. From this perspective, we recommend using the maximum likelihood method and AIC, both of which are related to Kullback–Leibler divergence. If one prefers using SLSC, we recommend not SLSC itself but SLSC's non-exceedance probability. One important purpose of this review is the introduction of well-used Japanese methods. Because some techniques that are slightly different from the international standard have been used for many years in Japan, we introduce those in the review article. [ABSTRACT FROM AUTHOR]

In recent years, extreme rainfall events with short delays and heavy rainfall have often occurred due to severe climate change. In 2015, Typhoon Soudelor caused a short-delayed heavy rainfall event in Nanshih River, which caused damage to a section of the Lansheng Bridge discharge station. The section was relocated upstream to rebuild the discharge station in 2019. However, the new discharge station cannot measure high flow due to the bridge structure. The flow observation range of Lansheng Bridge is therefore limited to normal flow, making it impossible to accurately estimate the flow during high-water stages. The purpose of this study is to use the past flow data of Nanshih River to estimate the flow rate under different return periods using frequency analysis. We used a Digital Elevation Model (DEM) to map the river's topography, and used the 3D hydraulic calculations of the FLOW-3D model to estimate the water stage and discharge of the Lansheng Bridge. We then verified the accuracy of the model with the measured flow and water stage, and finally used the water stage and discharge data obtained from numerical simulation to construct the stage–discharge rating curve of the Lansheng Bridge. In addition to preventing flood disasters, this study approach can provide reliable data for use in water conservation. It may also be utilized to overcome the problem of measuring and estimating high flow during typhoon floods. [ABSTRACT FROM AUTHOR]

Good postural control is considered to be a key component of an active lifestyle, and numerous studies have investigated the Center of Pressure (CoP) as a way of identifying motor deficits. However, the optimal frequency range for assessing CoP variables and the effect of filtering on the relationships between anthropometric variables and CoP are unclear. The aim of this work is to show the relationship between anthropometric variables and different ways of filtering the CoP data. CoP was measured in 221 healthy volunteers using a KISTLER force plate in four different test conditions, both mono and bipedal. The results show no significant changes in the existing correlations of the anthropometric variable values over different filter frequencies between 10 Hz and 13 Hz. Therefore, the findings with regard to anthropometric influences on CoP, with a reasonable but less than ideal filtering of the data, can be applied to other study settings. [ABSTRACT FROM AUTHOR]

The higher-order linear moments (LH-moments) method is one of the most commonly used methods for estimating the parameters of probability distributions in flood frequency analysis without sample censoring. This article presents the relationships necessary to estimate the parameters for eight probability distributions used in flood frequency analysis. Eight probability distributions of three parameters using first- and second-order LH-moments are presented, namely the Pearson V distribution, the CHI distribution, the inverse CHI distribution, the Wilson–Hilferty distribution, the Pseudo-Weibull distribution, the Log-normal distribution, the generalized Pareto Type I distribution and the Fréchet distribution. The exact and approximate relations for parameter estimation are presented, as are the exact and approximate relations for estimating the frequency factor specific to each method. In addition, the exact and approximate relationships of variation in the LH-skewness–LH-kurtosis are presented, as is the variation diagram of these statistical indicators. To numerically represent the analyzed distributions, a flood frequency analysis case study using the annual maximum series was carried out for the Prigor River. The analysis is presented compared to the linear moments (L-moments) method, which is the method that is intended to be used in the development of a new norm in Romania for determining the maximum flows. For the Prigor River, the most fit distributions are the Pseudo-Weibull and the generalized Pareto Type I for the linear moments method and the CHI and the Wilson–Hilferty distributions for the first higher-order linear moments method. The performance was evaluated using linear and higher-order linear moment values and diagrams. [ABSTRACT FROM AUTHOR]

This article analyzes six probability distributions from the Generalized Pareto family, with three, four and five parameters, with the main purpose of identifying other distributions from this family with applicability in flood frequency analysis compared to the distribution already used in the literature from this family such as Generalized Pareto Type II and Wakeby. This analysis is part of a larger and more complex research carried out in the Faculty of Hydrotechnics regarding the elaboration of a norm for flood frequency analysis using the linear moments method. In Romania, the standard method of parameter estimation is the method of ordinary moments, thus the transition from this method to the method of linear moments is desired. All the necessary elements for the distribution use are presented, such as the probability density functions, the complementary cumulative distribution functions, the quantile functions, and the exact and approximate relations for estimating parameters, for both methods of parameter estimation. All these elements are necessary for a proper transition between the two methods, especially since the use of the method of ordinary moments is done by choosing the skewness of the observed data depending on the origin of the maximum flows. A flood frequency analysis case study, using annual maximum and annual exceedance series, was carried out for the Prigor River to numerically present the analyzed distributions. The performance of this distribution is evaluated using a linear moments diagram. [ABSTRACT FROM AUTHOR]

In this paper, an optimized memristor emulator circuit is designed, by using nine MOSFET transistors and a ground capacitor. Our area- and power-optimized emulator circuit can be used for basic data storage and processing at the monitoring edge, in real-time applications. The memristor shows a nonlinear voltage–current relationship, but no multiplier circuit provides the memristor's nonlinear characteristics. As a result, the proposed memristor emulator has a very low chip area. The memristor circuit is designed in LTSpice, using 16 nm and 45 nm CMOS technology parameters, and the operating voltage is ±0.9 V. In this research, the theoretical derivations are validated using the simulated results of the memristor emulator circuit using different frequencies, capacitors, and input voltages in SPICE simulations. [ABSTRACT FROM AUTHOR]

This manuscript presents three families of distributions, namely the Beta, Beta Prime and Beta Exponential families of distributions. From all the distributions of these families, 14 statistical distributions of three, four and five parameters are presented that have applicability in the analysis of extreme phenomena in hydrology. These families of distributions were analyzed regarding the improvement of the existing legislation for the determination of extreme events, specifically the elaboration of a norm regarding frequency analysis in hydrology. To estimate the parameters of the analyzed distributions, the method of ordinary moments and the method of linear moments were used; the latter conforms to the current trend for estimating the parameters of statistical distributions. The main purpose of the manuscript was to identify other distributions from these three families with applicability in flood frequency analysis compared to the distributions already used in the literature from these families, such as the Log–logistic distribution, the Dagum distribution and the Kumaraswamy distribution. The manuscript does not exclude the applicability of other distributions from other families in the frequency analysis of extreme values, especially since these families were also analyzed within the research carried out in the Faculty of Hydrotechnics and presented in other materials. All the necessary elements for their use are presented, including the probability density functions, the complementary cumulative distribution functions, the quantile functions and the exact and approximate relations for estimating parameters. A flood frequency analysis case study was carried out for the Prigor RiverRiver, to numerically present the proposed distributions. The performance of this distributions were evaluated using the relative mean error, the relative absolute error and the L-skewness–L-kurtosis diagram. The best fit distributions are the Kumaraswamy, the Generalized Beta Exponential and the Generalized Beta distributions, which presented a stability related to both the length of the data and the presence of outliers. [ABSTRACT FROM AUTHOR]

The Mach–Zehnder intensity Modulator (MZM), named after Ludwig Mach and Ludwig Zehnder, is based on the corresponding interferometer. It splits light into two counter-rotating partial beams, which are later recombined with a controlled phase difference. The output of the MZM depends on the phase difference of the interferometer paths. This phase difference is usually adjusted by an electrical voltage applied to a Phase Shifter (PS) placed in one of the interferometer arms. For MZM applications in which the wavelength is changing, the applied voltage must be adjusted accordingly. We derived the equations describing the MZM output in the frequency domain for the case of a triangular PS voltage (necessary for a sinusoidal output) and compared the analytical results with measurements. Our setup uses an Optical Parametric Oscillator (OPO) with a tunable wavelength from 3.2–3.5 μm as the light source and a Lithium Tantalate (LT)-PS for the MZM's phase modulation. The novel insights enable new control methods for MZMs particularly suited for spectroscopic applications where the wavelength is scanned or otherwise altered. [ABSTRACT FROM AUTHOR]

Floods are one of the most destructive natural hazards in Pakistan, causing significant damage. During monsoons, when westerly winds and concentrated rainfall occur in rivers' catchments, floods become unmanageable. Given the limited resources of Pakistan, there has been minimal effort to quantify the amount of rainfall and runoff generated by ungauged catchments. In this study, ten hill torrents in Koh e Suleiman (District Rajanpur and DG Khan), an area affected by flash flooding in 2022 due to extreme precipitation events, were investigated. The Hydrologic Engineering Centre's Hydrologic Modeling System (HEC-HMS), a semi-distributed event-based hydrological model, was used to delineate streams and quantify runoff. Statistical analysis of the rainfall trends was performed using the non-parametric Gumbel extreme value analysis type I distribution, the Mann–Kendall test, and Sen's slope. The results of the study show that the total inflow to the river Indus is 0.5, 0.6, 0.7, and 0.8 MAF for 25, 50, 100, and 200 years of return period rainfall, respectively. This study presents appropriate storage options with a retention potential of 0.14, 1.14, and 1.13 MAF based on an analysis of the hydrology of these hill torrents to enhance the spate irrigation potential as flood control in the future. [ABSTRACT FROM AUTHOR]

The article deals with the detection of stress using the electrodermal activity (EDA) signal measured at the wrist. We present an approach for feature extraction from EDA. The approach uses frequency spectrum analysis in multiple frequency bands. We evaluate the proposed approach using the 4 Hz EDA signal measured at the wrist in the publicly available Wearable Stress and Affect Detection (WESAD) dataset. Seven existing approaches to stress detection using EDA signals measured by wrist-worn sensors are analysed and the reported results are compared with ours. The proposed approach represents an improvement in accuracy over the other techniques studied. Moreover, we focus on time to detection (TTD) and show that our approach is able to outperform competing techniques, with fewer data points. The proposed feature extraction is computationally inexpensive, thus the presented approach is suitable for use in real-world wearable applications where both short response times and high detection performance are important. We report both binary (stress vs. no stress) as well as three-class (baseline/stress/amusement) results. [ABSTRACT FROM AUTHOR]

Estimates of extreme precipitation are commonly associated with different sources of uncertainty. One of the primary sources of uncertainty in the statistical modeling of precipitation extremes comes from extreme data series (i.e., sampling uncertainty). Therefore, this research aimed to quantify the sampling uncertainty in terms of confidence intervals. In addition, this article examined how the data record length affects predicted extreme precipitation estimates and data set statistics. A nonparametric bootstrap resample was utilized to quantify the precipitation quantile sampling distribution at a particular non exceedance probability. This sampling distribution can provide a point estimation of the precipitation quantile and the confidence interval at a particular non exceedance probability. It has been shown that the different types of probability distributions fit the extreme precipitation data series of various weather stations. Therefore, the uncertainty analysis should be conducted using the best-fit probability distribution for extreme precipitation data series rather than a predefined single probability distribution for all stations based on modern extreme value theory. According to the 95% confidence intervals, precipitation quantiles are subject to significant uncertainty and the band of the uncertainty intervals increases with the return period. These uncertainty bounds need to be integrated into any frequency analysis from historical data. The average, standard deviation, skewness and kurtosis are highly affected by the data record length. Thus, a longer record length is desirable to decrease the sampling uncertainty and, therefore, decrease the error in the predicted quantile values. Moreover, the results suggest that a series of at least 40 years of data records is needed to obtain reasonably accurate estimates of the distribution parameters and the precipitation quantiles for 100 years return periods and higher. Using only 20 to 25 years of data to obtain estimates of the higher return period quantile is risky, since it created high sampling variability relative to the full data length. [ABSTRACT FROM AUTHOR]

In recent years, Circular Economy (CE) has captured vast global attention with regard to its potential in mitigating contemporary economic, social, and environmental challenges. This study aims to present the barriers that impede the application of CE concepts in the food supply chain (FSC) which received limited literature recognition. A systematic literature review is utilized to scrutinize challenges, resulting in 17 factors that burden CE adoption. The challenges were categorized under six subsets and were prioritized based on two perspectives: literature importance and empirical importance. A combination of literature frequency analysis and Field-Weighted Citation Impact was employed to derive the rankings related to literature importance. The pragmatic importance of challenging factors is derived using the Fuzzy Best-Worst method. Both rankings reveal that cost efficiency consideration is the most critical barrier that hinders the transition to CE in FSC. Thus, this paper highlights similarities and differences in the perspectives of academia and practicality by comparing the two prioritizations. The findings can be used to remove obstacles, create policies and strategies, and assist governments in implementing circular practices throughout FSC. [ABSTRACT FROM AUTHOR]

This article deals with the regression analysis of the ultrasonic signal amplitude when the character of the reflection surface has been changed from a planar case to a sharp corner case. The experiment was performed at a measurement distance within the interval from 100 mm to 215 mm. A nonlinear correlation between the amplitude of the ultrasound signal and the measured distance was demonstrated. By analyzing the frequency spectra, a poor nonlinear correlation between the maximum frequency component and the distance vector was found for the sharp corner case versus the planar case, which proved similar nonlinear characteristics as the signal amplitude marker. The strong linear correlation in the distance difference vectors in the amplitude analysis of the ultrasound signal confirmed the hypothesis of a direct relationship between the reflection surface geometric characteristic and the polarity of the difference. The ultrasound signal was identified as a 3rd-order dynamic system. The nonlinear correlation of the steady-state values of the modelled transfer functions versus distance likewise shows the characteristic of the polarity difference or character derivative as a quantification marker of the characteristics of the reflection surface from the geometric point of view. [ABSTRACT FROM AUTHOR]

There is an increasing interest in improving energy efficiency and reducing operational costs of induction motors in the industry. These costs can be significantly reduced, and the efficiency of the motor can be improved if the condition of the machine is monitored regularly and if monitoring techniques are able to detect failures at an incipient stage. An early fault detection makes the elimination of costly standstills, unscheduled downtime, unplanned breakdowns, and industrial injuries possible. Furthermore, maintaining a proper motor operation by reducing incipient failures can reduce motor losses and extend its operating life. There are many review papers in which analyses of fault detection techniques in induction motors can be found. However, all these reviewed techniques can detect failures only at developed or advanced stages. To our knowledge, no review exists that assesses works able to detect failures at incipient stages. This paper presents a review of techniques and methodologies that can detect faults at early stages. The review presents an analysis of the existing techniques focusing on the following principal motor components: stator, rotor, and rolling bearings. For steady-state and transient operating modes of the motor, the methodologies are discussed and recommendations for future research in this area are also presented. [ABSTRACT FROM AUTHOR]

Climate change is perceived to be the primary reason for the amplification of extreme climatic phenomena. Estimation of changes in extreme values under climate change thus plays an important role in disaster risk assessment and management. However, the different changes in extremes in two distinct regions: inland and coast under climate change are yet to be investigated meticulously. This study is intended to assess the changes in frequency of rainfall and temperature extremes under the impact of climate change in two distinct locations: coast and inland of Bengal delta, a region highly vulnerable to climate change. The multi-model ensemble (projections from CMIP6 framework) technique with the application of frequency analysis was employed to appraise the impact in two future time horizons. Results suggest that the inland estimate of extreme rainfall by the end of this century is barely able to exceed the coastal estimate of extreme rainfall in present conditions. The rate of increase of warm extremes is almost similar; however, with the cold extreme, the increase rate is a little higher inland than on the coast. In both regions, a greater rise in climate extremes is expected in the far future than in the near future. Overall, the coastal area is expected to be more vulnerable to flooding while the inland to drought under climate change in the Bengal delta region. [ABSTRACT FROM AUTHOR]

Earthquake-induced liquefaction is one of the main causes of levee breaches that can threaten human life and property. Conventionally, liquefaction hazard has been assessed in terms of the factor of safety F o S against liquefaction which ignores the potential variability of groundwater table (GWT) due to precipitation events. A probabilistic methodology, taking into account these GWT variations over time, is therefore presented in this study to assess the liquefaction hazard of an earthen flood protection levee. A frequency analysis based on the Annual Maxima/Generalised Extreme Value (AM/GEV) approach is first used to characterize the distribution of GWT extreme values. The CPT-based method is then applied with the provided GWT scenarios to predict liquefaction and display the hazard curves. Assuming a single constant GWT estimate during an earthquake revealed a certain liquefaction hazard within a sandy layer. Considering GWT variations during earthquakes showed, however, that liquefaction is unlikely to occur with an F o S threshold set at 1.0. These findings highlight: (1) the conservatism of the conventional approach that overestimates the liquefaction hazard, (2) the importance of the proposed probabilistic approach as a complementary tool for more reliable decision-making, and (3) the dependency of liquefaction hazard predictions on the degree of uncertainty in GWT estimates and F o S threshold. [ABSTRACT FROM AUTHOR]

The novel coronavirus, severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2), was identified as the pathogenic cause of coronavirus disease 2019 (COVID-19). The RNA-dependent RNA polymerase (RdRp) of SARS-CoV-2 is a potential target for the treatment of COVID-19. An RdRp complex:dsRNA structure suitable for docking simulations was prepared using a cryo-electron microscopy (cryo-EM) structure (PDB ID: 7AAP; resolution, 2.60 Å) that was reported recently. Structural refinement was performed using energy calculations. Structure-based virtual screening was performed using the ChEMBL database. Through 1,838,257 screenings, 249 drugs (37 approved, 93 clinical, and 119 preclinical drugs) were predicted to exhibit a high binding affinity for the RdRp complex:dsRNA. Nine nucleoside triphosphate analogs with anti-viral activity were included among these hit drugs, and among them, remdesivir-ribonucleoside triphosphate and favipiravir-ribonucleoside triphosphate adopted a similar docking mode as that observed in the cryo-EM structure. Additional docking simulations for the predicted compounds with high binding affinity for the RdRp complex:dsRNA suggested that 184 bioactive compounds could be anti-SARS-CoV-2 drug candidates. The hit bioactive compounds mainly consisted of a typical noncovalent major groove binder for dsRNA. Three-layer ONIOM (MP2/6-31G:AM1:AMBER) geometry optimization calculations and frequency analyses (MP2/6-31G:AMBER) were performed to estimate the binding free energy of a representative bioactive compound obtained from the docking simulation, and the fragment molecular orbital calculation at the MP2/6-31G level of theory was subsequently performed for analyzing the detailed interactions. The procedure used in this study represents a possible strategy for discovering anti-SARS-CoV-2 drugs from drug libraries that could significantly shorten the clinical development period for drug repositioning. [ABSTRACT FROM AUTHOR]

Climate change affects all the components of the hydrological cycle. Starting from precipitation distribution, climate alterations have direct effects on both surface water and groundwater in terms of their quantity and quality. These effects lead to modifications in water availability for agriculture, ecology and other social uses. Change in rainfall patterns also affects the runoff of natural rivers. For this reason, studying runoff data according to classical hydrological approaches, i.e., statistical inference methods that exploit stationary probability distributions, might result in missing important information relevant to climate change. From this point of view, a new approach has to be found in the study of this type of data that allows for non-stationary analysis. In this study, the statistical framework known as Generalized Additive Models for Location, Scale and Shape (GAMLSS), which can be used to carry out non-stationary statistical analyses, was applied in a non-stationary frequency analysis of runoff data collected by four gauges widely distributed across Sicily (Italy) in the period 1916–1998. A classical stationary frequency analysis of these runoff data was followed by a different non-stationary frequency analysis; while the first was made using annual rainfall as a covariate, with the aim of understanding how certain statistical parameters of runoff distribution vary with changes in rainfall, the second derived information about the temporal variability of runoff frequencies by considering time as a covariate. A comparison between stationary and non-stationary approaches was carried out using the Akaike information criterion as a performance metric. After analyzing four different probability distributions, the non-stationary model with annual rainfall as a covariate was found to be the best among all those examined, and the three-parameter lognormal the most frequently preferred distribution. [ABSTRACT FROM AUTHOR]

Autoimmune diseases (AIDs) are often co-associated, and about 25% of patients with one AID tend to develop other comorbid AIDs. Here, we employ the power of datamining to predict the comorbidity of AIDs based on their normalized co-citation in PubMed. First, we validate our technique in a test dataset using earlier-reported comorbidities of seven knowns AIDs. Notably, the prediction correlates well with comorbidity (R = 0.91) and validates our methodology. Then, we predict the association of 100 AIDs and classify them using principal component analysis. Our results are helpful in classifying AIDs into one of the following systems: (1) gastrointestinal, (2) neuronal, (3) eye, (4) cutaneous, (5) musculoskeletal, (6) kidneys and lungs, (7) cardiovascular, (8) hematopoietic, (9) endocrine, and (10) multiple. Our classification agrees with experimentally based taxonomy and ranks AID according to affected systems and gender. Some AIDs are unclassified and do not associate well with other AIDs. Interestingly, Alzheimer's disease correlates well with other AIDs such as multiple sclerosis. Finally, our results generate a network classification of autoimmune diseases based on PubMed text mining and help map this medical universe. Our results are expected to assist healthcare workers in diagnosing comorbidity in patients with an autoimmune disease, and to help researchers in identifying common genetic, environmental, and autoimmune mechanisms. [ABSTRACT FROM AUTHOR]

Hunting is a potentially dangerous phenomenon related to the lateral oscillation of the wheels that impacts the rails and causes the wear of the infrastructure's components. Therefore, the analysis and timely detection of hunting can lead to the application of corrective maintenance tasks, reducing damages, and costs and even derailments as a result. In this work, the vibration response of a finite element model of a rail with hunting-induced loads by a single wheel is analyzed in three directions: longitudinal, lateral, and vertical. The contact patch forces are calculated by means of Simpack® using the Kalker linear theory and the contact Hertz theory. The system is solved by using the Newmark-β approach. The results of the deflection and vibration analysis, following the proposed methodology, show how the different characteristics of the loads impact the rail. [ABSTRACT FROM AUTHOR]

Investigation into non-destructive testing and evaluation of 3D printing quality is relevant due to the lack of reliable methods for non-destructive testing of 3D printing defects, including testing of the surface quality of 3D printed parts. The article shows how it is possible to increase the efficiency of online monitoring of the quality of the 3D printing technological process through the use of an optical contactless high-performance measuring instrument. A comparative study of contact (R130 roughness tester) and non-contact (LJ-8020 laser profiler) methods for determining the height of irregularities on the surface of a steel reference specimen was performed. It was found that, in the range of operation of the contact method (Ra 0.03–6.3 µm and Rz 0.2–18.5 µm), the errors of the contactless method in determining the standard surface roughness indicators Ra and Rz were 23.7% and 1.6%, respectively. Similar comparative studies of contact and non-contact methods were performed with three defect-free samples made of plastic polylactic acid (PLA), with surface irregularities within the specified range of operation of the contact method. The corresponding errors increased and amounted to 65.96% and 76.32%. Finally, investigations were carried out using only the non-contact method for samples with different types of 3D printing defects. It was found that the following power spectral density (PSD) estimates can be used as diagnostic features for determining 3D printing defects: Variance and Median. These generalized estimates are the most sensitive to 3D printing defects and can be used as diagnostic features in online monitoring of object surface quality in 3D printing. [ABSTRACT FROM AUTHOR]

Three-point bending tests on Short Beam Shear (SBS) specimens are performed to investigate the interlaminar shear properties of plain weave fabric CFRP composites. The tests are performed in a controlled environmental chamber at two different elevated temperatures. The interlaminar shear properties of the specimens remain largely unaffected by the testing temperature. However, the SEM micrographs show different damage progressions between the specimens tested at 100 °C and 120 °C. Fibre ruptures and longer delamination between the plies, as a result of a high temperature, are observed in the specimens tested at 120 °C, which are not observed in the specimens tested at 100 °C. In addition, the acoustic emission activities during the tests are investigated by using piezoelectric sensors. The information-theoretic parameter, the Lempel-Ziv (LZ) complexity, is calculated for the recorded acoustic signals. The LZ Complexities are used for identifying the occurrence of the first delamination failure in the specimens. Additionally, the two features of the acoustic signals, LZ complexity and Weighted Peak Frequency (W.P-Freq), are used for distinguishing the different damage sources in the CFRP specimens. The results are well-supported by the time-frequency analysis of the acoustic signals using a Continuous Wavelet Transform (CWT). [ABSTRACT FROM AUTHOR]

One of the aims of vibration signal analysis is the assessment of the condition of technical objects at each stage of operation based on a cause-and-effect relationship between the technical condition of the device and the features of the vibration signal available through the measurement experiment. The essential features of the signal (in the form of certain measures) are available through appropriate operations on the measurement signal. The problem arises when the measuring signal is not a fully deterministic one, it shows features common to deterministic and random signals. Consequently, some simple periodic signal measures such as spectrum frequency components introduce some level of uncertainty in the before mentioned cause-and-effect relationship. Thus, the assessment of the technical condition in the selected frequency components of the spectrum of the measuring signal may not be reliable. These difficulties can be overcome by using the frequency-frequency analysis of the diagnostic signal. The entire frequency spectrum is converted into an image in which the frequency components form characteristic patterns unique to the actual condition of the technical object. The final assessment of the condition is achieved through the identification of a unique image pattern by comparison with reference image patterns created with a generation model. [ABSTRACT FROM AUTHOR]

The commercial utilization of bulk nanosilica is widespread in concrete, rubber and plastics, cosmetics and agriculture-related applications, and the market of this product is projected to exceed USD 5 billion by 2025. In this investigation, the local dynamics of a nanosilica bed, excited with sinusoidal acoustic waves of different frequencies, were carefully monitored using sensitive pressure transducers to obtain detailed insights into the effectiveness of sound waves as a means of energy transport inside the bed. The evolution of wave patterns and their frequency and power distributions were examined both in the freeboard and in the static bed. These results were compared with those obtained by using an empty column. The acoustic frequency strongly affected the signal power. The average power of the acoustic signal in the freeboard region was twice higher than that for the empty column, whereas the same (power) ratio decreased to approximately 0.03 inside the bed for 300 Hz. However, at 360 Hz, the power ratio was substantially lower at 0.24 and 0.002 for the freeboard and the granular bed, respectively, thereby indicating tremendous attenuation of acoustic waves in the granular media at all frequencies. [ABSTRACT FROM AUTHOR]

Previous soil moisture conditions play an important role in the design of hydraulic structures because they are directly related to the runoff threshold associated with a return period. These represent one of the main determinants of the runoff response of a drainage basin. One of the main difficulties facing hydrologists in Colombia lies in the time spent gathering and analyzing information related to the selection of antecedent moisture conditions. In this study, complete records from 19 rainfall stations located in the Atlántico region, Colombia, were used to analyze the cumulative precipitation during the 5 days prior to the annual maximum daily precipitation associated with different return periods using the Gev, Gumbel, Pearson Type III and Log Pearson Type III probability distributions. Different interpolation methods (IDW, kriging and spline) were applied to evaluate the spatial distribution of the antecedent moisture conditions. The main contribution of this research is establishing, using a probabilistic approach, the behavior of antecedent moisture conditions in a particular region, which can be used by engineers and designers to plan water infrastructure. This probabilistic approach was applied to a case study of the Atlántico region, Colombia, where the spatial distribution of antecedent moisture conditions was calculated for several return periods. The results indicate that the better results were obtained with the IDW interpolation method, and the Pearson Type III and Gumbel distributions also showed the best fits based on the Akaike criterion. [ABSTRACT FROM AUTHOR]

During contact, deformation, and fracture of surface asperities between the friction surfaces of materials, acoustic emission (AE) waves are generated as the strain energy is released. By detecting the AE waves during friction using an AE sensor, the state of friction, wear, and lubrication between the friction surfaces can be measured and evaluated with high sensitivity. In this study, in order to establish a method for evaluating the writing performance of ballpoint pens by AE sensing, the measurement method was examined, and AE signal waveforms were analyzed. It was found that AE sensing can detect phenomena that do not appear as a change in frictional force during writing. In addition, frequency analysis of the AE signal waveforms revealed that differences in writing performance depending on the ink type of the ballpoint pen can be evaluated and interpreted. [ABSTRACT FROM AUTHOR]

Downhole drill string vibration data can provide an effective reference for research drill string vibration during drilling. In this paper, the research group used a storage-type downhole vibration measurement equipment equipped with an orthogonal, three-axis accelerometer to measure and collect drill string vibration signals during drilling in an oil well. Based on the installation characteristics of the sensor, the relationship between the acceleration measurement value of the sensor and the center acceleration value of the drill string is obtained. Then the time-domain signals representative of the vibration in igneous rock drilling is analyzed. It can be found that the occurrence of stick-slip vibration can be judged by the regular wave packets in the time-domain signal, while the time-domain signal of whirl is disorderly. The main frequency of stick-slip vibration in the low-frequency band is 0.1221 Hz and the period of stick-slip vibration is very close to 10 s through Fast Fourier (FFT) and Short-time Fourier transform (DTFT) methods. In the process of whirling, two frequencies, respectively, 0.05341 Hz and 155.5 Hz, play a major role. The frequency 0.05341 Hz is very close to the reciprocal of the period of 20 s when the peak energy spectrum density appears, indicating that the occurrence of whirl is very likely to be related to the natural frequency of the drilling tool. Through further time-frequency analysis, it also can be found that the occurrence of whirl and stick-slip is greatly related to the use of torsional impactors and jars. [ABSTRACT FROM AUTHOR]