Search

Engineering new photoanode materials to substantially improve the efficiency of natural dye-sensitized solar cells (DSSC-Ns) is a significant challenge in the field of DSSC-Ns. This study utilizes the doctor blade technique to develop novel photoanode materials based on mixtures with different proportions of TiO2 Hombikat UV100 and TiO2 P25, two nanometric powders with different grain sizes. The fabricated films were studied by X-ray diffraction, which revealed a dominant anatase phase in the structure, as was corroborated by Raman spectroscopy. The crystallite size of the materials was determined using the Scherrer method. Using optical measurements, we estimated the bandgap energy (Eg) of the photoanodes that varied in the samples at around 3 eV. The assembled solar cells demonstrated a significant efficiency of 4.87% in the TiO2 Hombikat UV100/TiO2 P25 sample with the proportion of 50–50% (HP50) of blended photoanode. This sample device exhibited a fill factor of 50.41%, an open circuit voltage (Voc) of 0.65 V, and a current density of 14.75 mA/cm2 for an active surface area of 0.19 cm2. The HP50 sample constituted highly efficient DSSC-Ns and photoanodes with lower open-circuit voltage in the series, while HP40 developed a Voc of 0.73 V, and HP30 developed a Voc of 0.70 V. [ABSTRACT FROM AUTHOR]

High-performance photovoltaic devices require active photoanodes with superior optoelectric properties. In this study, we synthesized neodymium ruthenate, Nd2Ru2O7 (NRO), and gadolinium ruthenate pyrochlore oxides, Gd2Ru2O7 (GRO), via the solid-state reaction technique, showcasing their potential as promising candidates for photoanode absorbers to enhance the efficiency of dye-sensitized solar cells. A structural analysis revealed predominantly cubic symmetry phases for both materials within the Fd-3m space group, along with residual orthorhombic symmetry phases (Nd3RuO7 and Gd3RuO7, respectively) refined in the Pnma space group. Raman spectroscopy further confirmed these phases, identifying distinct active modes of vibration in the predominant pyrochlore oxides. Additionally, a scanning electron microscopy (SEM) analysis coupled with energy-dispersive X-ray spectroscopy (EDX) elucidated the morphology and chemical composition of the compounds. The average grain size was determined to be approximately 0.5 µm for GRO and 1 µm for NRO. Electrical characterization via I-V measurements revealed that these pyrochlore oxides exhibit n-type semiconductor behavior, with conductivity estimated at 1.5 (Ohm·cm)−1 for GRO and 4.5 (Ohm·cm)−1 for NRO. Collectively, these findings position these metallic oxides as promising absorber materials for solar panels. [ABSTRACT FROM AUTHOR]

Ferroelectric property that induces electrocaloric effect was investigated in Ba(GexTi1−x)O3 ceramics, known as BTGx. X-ray diffraction analysis shows pure perovskite phases in tetragonal symmetry compatible with the P4mm (No. 99) space group. Dielectric permittivity exhibits first-order ferroelectric-paraelectric phase transition, confirmed by specific heat measurements, similar to that observed in BaTiO3 (BTO) crystal. Curie temperature varies weakly as a function of Ge-content. Using the direct and indirect method, we confirmed that the adiabatic temperature change ΔT reached its higher value of 0.9 K under 8 kV/cm for the composition BTG6, corresponding to an electrocaloric responsivity ΔT/ΔE of 1.13 × 10−6 K.m/V. Such electrocaloric responsivity significantly exceeds those obtained so far in other barium titanate-based lead-free electrocaloric ceramic materials. Energy storage investigations show promising results: stored energy density of ~17 mJ/cm3 and an energy efficiency of ~88% in the composition BTG5. These results classify the studied materials as candidates for cooling devices and energy storage applications. [ABSTRACT FROM AUTHOR]

Exclusive and unprecedented interest was accorded in this paper to the synthesis of BiFeO3 nanopowders by the polyol process. The synthesis protocol was explored and adjusted to control the purity and the grain size of the final product. The optimum parameters were carefully established and an average crystallite size of about 40 nm was obtained. XRD and Mössbauer measurements proved the high purity of the synthesized nanostructurated powders and confirmed the persistence of the rhombohedral R3c symmetry. The first studies on the magnetic properties show a noticeable widening of the hysteresis loop despite the remaining cycloidal magnetic structure, promoting the enhancement of the ferromagnetic order and consequently the magnetoelectric coupling compared to micrometric size powders. [ABSTRACT FROM AUTHOR]

This article is devoted to the investigation of the dielectric and repolarization properties of barium zirconate and barium titanate BaZrO3/BaTiO3 superlattices with a period of 13.322 nm on a monocrystal magnesium oxide (MgO) substrate. Synthesized superlattices demonstrated a ferroelectric phase transition at a temperature of approximately 393 °C, which is far higher than the Curie temperature of BaTiO3 thin films and bulk samples. The dielectric permittivity of the superlattice reached more than 104 at maximum. As the electric field frequency increased, the dielectric constant of the studied superlattice decreased over the entire study temperature range, but position of the maximum dielectric constant remained the same with changing frequency. The temperature dependence of the inverse dielectric permittivity 1/ε(T) for the studied samples shows that, in the investigated superlattice, both Curie–Weiss law and the law of “two” were followed. Additionally, the ε(T) dependences showed practically no temperature hysteresis with heating and cooling. Samples of synthesized superlattices had a relatively small internal bias field, which was directed from the superlattice towards the substrate. [ABSTRACT FROM AUTHOR]