Search

The partial discharge (PD) event in high-voltage insulation releases energy, exerts mechanical pressure, and generates elastic waves. Detecting and locating these PD events through short-duration acoustic pulses is well established, particularly in gas-insulated systems and oil-insulated transformers. However, its full potential remains untapped in solid insulation systems, where the propagation capability of the acoustic pulse and the acoustic reflections pose fundamental challenges to the acoustic emission (AE) detection technique. This study investigates the influence of reflections and multiple paths on the propagating acoustic pulse in polymeric insulating materials using a finite element method (FEM) in COMSOL. It was observed that the reflections from the boundary influence the propagating pulse's shape, peak magnitude, and arrival time. An analytical MATLAB model further quantifies the impact of multiple propagation paths on the shape, magnitude, and arrival time of the pulse travelling in a cylinder. Additionally, a Perfect Matched Layer (PML) was implemented in the COMSOL model to eliminate the reflections from the boundary, and it revealed that the acoustic pulse magnitude decreases with distance following the inverse square law. In essence, the models aid in measuring how reflections contribute to the observed signals, facilitating the precise identification of the source of the PD event in the tested system. [ABSTRACT FROM AUTHOR]

Insulation resistance (IR) is an essential metric indicating insulation conditions of extruded power cables. To deliver reliable IR simulation as a reference for practical cable inspection, in this paper, four IR degradation models for cross-linked polyethylene-insulated cables under thermal ageing are presented. In addition, the influences of methodologies and temperature profiles on IR simulation are evaluated. Cable cylindrical insulation is first divided into sufficiently small segments whose temperatures are simulated by jointly using a finite volume method and an artificial neural network to model the thermal ageing experiment conditions. The thermal degradation of IR is then simulated by dichotomy models that randomly sample fully degraded segments based on an overall insulation (layer) ageing condition estimation and discretization models that estimate the gradual degradation of individual segments, respectively. Furthermore, uniform and non-uniform temperature profiles are incorporated into dichotomy and discretization models, respectively, for a comparison. The IR simulation results are not only compared between different models, but also discussed around the sensitivity of IR simulation to segment sizes and degradation rates. This provides cable assessment engineers with insights into model behaviour as a reference for their selection of appropriate IR degradation models. [ABSTRACT FROM AUTHOR]

Impulsive underwater discharges have been investigated for many decades, yet the complex pre-breakdown processes that underpin their development are not fully understood. Higher pre-breakdown energy losses may lead to significant reduction in the magnitude and intensity of the pressure waves generated by expanding post-breakdown plasma channels. Thus, it is important to characterize these losses for different discharge types and to identify approaches to their reduction. The present paper analyses thermal pre-breakdown processes in the case of free path and wire-guided discharges in water: fast joule heating of a small volume of water at the high-voltage electrode and joule heating and the melting of the wire, respectively. The energy required for joule heating of the water and metallic wire have been obtained from thermal models, analysed and compared with the experimental pre-breakdown energy losses. Pressure impulses generated by free path and by wire-guided underwater discharges have also been investigated. It was shown that wire-guided discharges support the formation of longer plasma channels better than free path underwater discharges for the same energy available per discharge. This results in stronger pressure impulses developed by underwater wire-guided discharges. It has been shown that the pressure magnitude in the case of both discharge types is inversely proportional to the observation distance which is a characteristic of a spherical acoustic wave. [ABSTRACT FROM AUTHOR]