Search

Olive has a notable importance in countries of Mediterranean basin and its profitability depends on several factors such as actual yield, production cost or product price. Actual "on year" Yield (AY) is production (kg tree-1) in "on years", and this research attempts to relate it with geometrical parameters of the tree canopy. Regression equation to forecast AY based on manual canopy volume was determined based on data acquired from different orchard categories and cultivars during different harvesting seasons in southern Spain. Orthoimages were acquired with unmanned aerial systems (UAS) imagery calculating individual crown for relating to canopy volume and AY. Yield levels did not vary between orchard categories; however, it did between irrigated orchards (7000-17,000 kg ha-1) and rainfed ones (4000-7000 kg ha-1). After that, manual canopy volume was related with the individual crown area of trees that were calculated by orthoimages acquired with UAS imagery. Finally, AY was forecasted using both manual canopy volume and individual tree crown area as main factors for olive productivity. AY forecast only by using individual crown area made it possible to get a simple and cheap forecast tool for a wide range of olive orchards. Finally, the acquired information was introduced in a thematic map describing spatial AY variability obtained from orthoimage analysis that may be a powerful tool for farmers, insurance systems, market forecasts or to detect agronomical problems. [ABSTRACT FROM AUTHOR]

Crown porosity influences radiation interception, air movement through the fruit orchard, spray penetration, and harvesting operation in fruit crops. The aim of the present study was to develop an accurate and reliable methodology based on transmitted radiation measurements to assess the porosity of traditional olive trees under different pruning treatments. Transmitted radiation was employed as an indirect method to measure crown porosity in two olive orchards of the Picual and Hojiblanca cultivars. Additionally, three different pruning treatments were considered to determine if the pruning system influences crown porosity. This study evaluated the accuracy and repeatability of four algorithms in measuring crown porosity under different solar zenith angles. From a 14 to 30 solar zenith angle, the selected algorithm produced an absolute error of less than 5% and a repeatability higher than 0.9. The described method and selected algorithm proved satisfactory in field results, making it possible to measure crown porosity at different solar zenith angles. However, pruning fresh weight did not show any relationship with crown porosity due to the great differences between removed branches. A robust and accurate algorithm was selected for crown porosity measurements in traditional olive trees, making it possible to discern between different pruning treatments. [ABSTRACT FROM AUTHOR]

Sensors, communication systems and geo-reference units are required to achieve an optimized management of agricultural inputs with respect to the economic and environmental aspects of olive groves. In this study, three commercial olive harvesters were tracked during two harvesting seasons in Spain and Chile using remote and autonomous equipment that was developed to determine their time efficiency and effective based on canopy shaking for fruit detachment. These harvesters work in intensive/high-density (HD) and super-high-density (SHD) olive orchards. A GNSS (Global Navigation Satellite System) and GSM (Global System for Mobile Communications) device was installed to track these harvesters. The GNSS receiver did not affect the driver's work schedule. Time elements methodology was adapted to the remote data acquisition system. The effective field capacity and field efficiency were investigated. In addition, the field shape, row length, angle between headland alley and row, and row alley width were measured to determinate the optimum orchard design parameters value. The SHD olive harvester showed significant lower effective field capacity values when alley width was less than 4 m. In addition, a yield monitor was developed and installed on a traditional olive harvester to obtain a yield map from the harvested area. The hedge straddle harvester stood out for its highly effective field capacity; nevertheless, a higher field efficiency was provided by a non-integral lateral canopy shaker. All of the measured orchard parameters have influenced machinery yields, whether effective field capacity or field efficiency. A saving of 40% in effective field capacity was achieved with a reduction from 4 m or higher to 3.5 m in alley width for SHD olive harvester. A yield map was plotted using data that were acquired by a yield monitor, reflecting the yield gradient in spite of the larger differences between tree yields. [ABSTRACT FROM AUTHOR]

Ultrasonic sensors are often used to adjust spray volume by allowing the calculation of the crown volume of tree crops. The special conditions of the olive tree require the use of long-range sensors, which are less accurate and faster than the most commonly used sensors. The main objectives of the study were to determine the suitability of the sensor in terms of sound cone determination, angle errors, crosstalk errors and field measurements. Different laboratory tests were performed to check the suitability of a commercial long-range ultrasonic sensor, as were the experimental determination of the sound cone diameter at several distances for several target materials, the determination of the influence of the angle of incidence of the sound wave on the target and distance on the accuracy of measurements for several materials and the determination of the importance of the errors due to interference between sensors for different sensor spacings and distances for two different materials. Furthermore, sensor accuracy was tested under real field conditions. The results show that the studied sensor is appropriate for olive trees because the sound cone is narrower for an olive tree than for the other studied materials, the olive tree canopy does not have a large influence on the sensor accuracy with respect to distance and angle, the interference errors are insignificant for high sensor spacings and the sensor's field distance measurements were deemed sufficiently accurate. [ABSTRACT FROM AUTHOR]

The management of olive pruning residue has shifted from burning to shredding, laying residues on soil, or harvesting residues for use as a derivative. The objective of this research is to develop, test, and validate a methodology to measure the dimensions, outline, and bulk volume of pruning residue windrows in olive orchards using both a manual and a 3D Time-of-Flight (ToF) camera. Trees were pruned using trunk shaker targeted pruning, from which two different branch sizes were selected to build two separate windrow treatments with the same pruning residue dose. Four windrows were built for each treatment, and four sampling points were selected along each windrow to take measurements using both manual and 3D ToF measurements. Windrow section outline could be defined using a polynomial or a triangular function, although manual measurement required processing with a polynomial function, especially for high windrow volumes. Different branch sizes provided to be significant differences for polynomial function coefficients, while no significant differences were found for windrow width. Bigger branches provided less bulk volume, which implied that these branches formed less porous windrows that smaller ones. Finally, manual and 3D ToF camera measurements were validated, giving an adequate performance for olive pruning residue windrow in-field assessment. [ABSTRACT FROM AUTHOR]

Antibody--drug conjugates (ADCs) are a promising delivery system that involves linking a monoclonal antibody (mAb) to a specific drug, such as a cytotoxic agent, to target tumor cells. This new class of antitumor therapy acts as a "biological missile" that can destroy tumor cells while increasing the therapeutic index and decreasing toxicity. One of the most critical factors in ADC design is selecting a target antigen that is highly expressed on the surface of cancer cells. In this study, we conjugated Cetuximab (Cet), a monoclonal antibody that targets the epidermal growth factor receptor (EGFR), to aminobisphosphonates (N-BPs) such as ibandronate (IBA) or risedronate (RIS) or zoledronate (ZA). Cetuximab is administered to patients with metastatic colorectal carcinoma (mCRC) with a wild-type (WT) EGFR transduction pathway. Also, it is well established that N-BPs can trigger the antitumor activity of Vδ2 T cells in both in vitro and in vivo experimental models. The resulting ADCs were added in co-culture to assess the effect on CRC cell line proliferation and sensitivity to Vδ2 T antitumor lymphocytes in comparison with the native antibody. These assays have been performed both in conventional and 3D spheroid cultures. We found that all three ADCs can increase the inhibitory effect on cell proliferation of the WT-EGFR cell line Caco-2 while only Cet-RIS and Cet-ZA can increase the cytotoxicity mediated by Vδ2 T cells against both WT and EGFR-mutated CRC cell lines (Caco-2, DLD-1, and HCT-116). Also, the ADCs can trigger the cell proliferation of Vδ2 T cells present in peripheral blood and tumor specimens. Our findings indicate that anti-EGFR antibodies bound to N-BPs can improve the antitumor effects of the native antibody possibly increasing the therapeutic effect., Competing Interests: The authors declare no conflicts of interest. The funders had no role in the design of the study; in the collection, analyses, or interpretation of data; in the writing of the manuscript; or in the decision to publish the results.

In recent years, increasing attention has been paid to understanding the causes of infertility, which is being recognized as a growing health problem affecting large numbers of couples worldwide. Male infertility is a contributing factor in approximately 30-40% of cases, and one of its etiological causes is sexually transmitted infections (STIs). Among sexually transmitted pathogens, human papillomavirus (HPV) can contribute in various ways to the failure of spontaneous and assisted reproduction, acting in the different phases of conception, especially in the early ones. In particular, HPV infection can affect sperm DNA integrity, sperm motility, count, viability, and morphology and can induce the production of anti-sperm antibodies (ASAs). In this narrative review, we aimed to provide an overview of existing research on the potential adverse effects of HPV infection on male reproductive health. Furthermore, we analyzed how limiting the spread of the infection, particularly with gender-neutral vaccination, could be a possible therapeutic tool to counteract male and female fertility problems.

More than 226 million people are affected by some type of disaster every year in various dimensions of human life, both in the short and long term. In this context, housing provision plays a leading role when it comes to basic needs and the choice of construction technologies and materials are determinant for a well-succeeded housing provision process. This work aims to analyze the viability of reinforced masonry technology with cement-stabilized compressed earth blocks as an alternative for the (re)construction process in situations that involve disaster risk reduction (DRR). To address this issue, a discussion from the literature and the main results obtained during the investigations carried out within the scope of the Simple Housing Solution (SHS) Project are presented. In the sequence, analyses are performed under United Nations Development Program/International Recovery Platform sustainability recommendations: environmental, technical, financial and socio-organizational aspects. It is concluded that the technology of Compressed Earth Blocks (CEBs) reinforced structural masonry has a high potential to be successfully applied in DRR situations, especially when associated with the community construction system in a joint effort.

Over the last decades, new materials with outstanding performance have been introduced in the construction industry. Considering these new technologies, it is worth mentioning that nanotechnology has revolutionized various areas of engineering. In the area of civil engineering and construction, cement is used for various purposes and the search to improve its performance has been receiving growing interest within the scientific community. The objective of this research was to evaluate the behavior of cement mortar produced by the addition of multi-walled carbon nanotubes (MWCNTs) in different concentrations by comparing their physical and mechanical properties with the properties of the nanotube-free composite. Motivated by the lack of consensus in the literature concerning to the optimal dosage of CNTs in cementitious matrices, three different carbon nanotube ratios, 0.20, 0.40 and 0.60 wt % Portland cement, were investigated with the aim of evaluating the mechanical properties. Destructive tests were carried out to determine the compressive strength, flexural strength and split tensile strength. Additionally, a non-destructive test was performed to determine the dynamic elastic modulus and density. Scanning electron microscopy (SEM) images showed the interaction between the MWCNTs and the hydration products of Portland cement mortar. The results indicated the potential contribution of 0.40 wt % cement CNTs to the enhancement of the mechanical properties of the cement composite as a promising construction material., Competing Interests: The authors declare no conflicts of interest.