Search

The ketogenic diet (KD) is a high-fat, low-carbohydrate diet that mimics the physiological state of fasting. The potential therapeutic effects in many chronic conditions have led to the gaining popularity of the KD. The KD has been demonstrated to alleviate inflammation and oxidative stress, modulate the gut microbiota community, and improve metabolic health markers. The modification of these factors has been a potential therapeutic target in serious mental illness (SMI): bipolar disorder, major depressive disorder, and schizophrenia. The number of clinical trials assessing the effect of the KD on SMI is still limited. Preliminary research, predominantly case studies, suggests potential therapeutic effects, including weight gain reduction, improved carbohydrate and lipid metabolism, decrease in disease-related symptoms, increased energy and quality of life, and, in some cases, changes in pharmacotherapy (reduction in number or dosage of medication). However, these findings necessitate further investigation through larger-scale clinical trials. Initiation of the KD should occur in a hospital setting and with strict care of a physician and dietitian due to potential side effects of the diet and the possibility of exacerbating adverse effects of pharmacotherapy. An increasing number of ongoing studies examining the KD's effect on mental disorders highlights its potential role in the adjunctive treatment of SMI. [ABSTRACT FROM AUTHOR]

Xanthohumol is a cancer chemopreventive agent that can interfere with the initiation, promotion, and progression phase of carcinogenesis via a variety of inhibitory mechanisms. Xanthohumol was reported as an effective agent against leukemia/lymphoma cells. In the present study, we investigated the effect of xanthohumol and its natural and semisynthetic derivatives against various canine leukemia/lymphoma cell lines. Xanthohumol, three hops minor prenylflavonoids (xanthohumol C, xanthohumol D, α,β-dihydroxanthohumol) and four derivatives obtained by biotransformation (xanthohumol 4′-O-β-D-(4‴-O-methyl)-glucopyranoside) as well as by chemical modification (1″,2″-dihydroxanthohumol K, 2,3-dehydroisoxanthohumol, (Z)-6,4′-dihydroxy-4-methoxy-7-prenylaurone) were tested for their antiproliferative and pro-apoptotic activities against the following canine leukemia/lymphoma cell lines: CLBL-1 (B-cell lymphoma), CLB70 (B-cell leukemia), and GL-1 (B-cell leukemia). The compounds were tested at a final concentration range of 0.1–30 µM for 48 h. All eight of the tested flavonoids exerted concentration-dependent cytotoxicity in the selected canine lymphoma/leukemia cell lines. Three compounds markedly decreased the viability of all cell lines with IC50 in the range of 0.5 to 8 μM. Double-staining of the treated cells with AnnexinV and propidium iodide revealed that the dying cells were mostly in the late apoptosis stage. ROS production and changes in mitochondrial potential were detected. Western blot analysis showed a decreased expression of Bcl-2. Canine lymphoma and leukemia cell lines are sensitive to xanthohumol derivatives, and the compounds acted through an apoptotic cell-death mechanism. These compounds, either used alone or in combination with other therapies, may be useful for the treatment of canine leukemia/lymphoma. [ABSTRACT FROM AUTHOR]

Face recognition operating in visible domains exists in many aspects of our lives, while the remaining parts of the spectrum including near and thermal infrared are not sufficiently explored. Thermal–visible face recognition is a promising biometric modality that combines affordable technology and high imaging qualities in the visible domain with low-light capabilities of thermal infrared. In this work, we present the results of our study in the field of thermal–visible face verification using four different algorithm architectures tested using several publicly available databases. The study covers Siamese, Triplet, and Verification Through Identification methods in various configurations. As a result, we propose a triple triplet face verification method that combines three CNNs being used in each of the triplet branches. The triple triplet method outperforms other reference methods and achieves TAR @FAR 1% values up to 90.61%. [ABSTRACT FROM AUTHOR]

The as-cast microstructure, alloying element segregation, solidification behavior, and thermal stability of model superalloys based on Inconel 740 with various Al/Ti ratios (0.7, 1.5, 3.4) and Ta (2.0, 3.0, 4.0 wt%) concentrations were investigated via ThermoCalc simulations, scanning and transmission electron microscopy, energy-dispersive X-ray spectroscopy, dilatometry, and differential scanning calorimetry. The solidification of the superalloys began with the formation of primary γ dendrites, followed by MC carbides. The type of subsequently formed phases depended on the superalloys' initial Al/Ti ratio and Ta concentration. The results obtained from solidification simulations were compared to the obtained microstructures. For all castings, the dendritic regions consisted of fine γ′ precipitates, with their size mainly depending on the initial Al/Ti ratio, whereas in the interdendritic spaces, (Nb, Ta, Ti)C carbides and Nb-rich Laves phase precipitates were present. In high Al/Ti ratio superalloys, β-NiAl precipitates, strengthened by η and α-Cr phases, were observed. Based on dilatometric results, the dissolution of γ′ precipitates was accompanied by a substantial increase in the coefficient of thermal expansion. The end of the dilatation effect took place around the γ′ solvus temperature, as determined via calorimetry. Moreover, the bulk solidus temperature was preceded by the dissolution of the Laves phase, which may be accompanied by local melting. [ABSTRACT FROM AUTHOR]

The authors decided to investigate the impact of the lockdown period and the resulting limitations in informatics education, especially programming, in out-of-school electronics courses using traditional and distance learning modes in primary school COVID-19 pandemic settings. Two extracurricular courses were held successively; the first electronics course was performed in a traditional out-of-school learning mode using Arduino kits, while the other was held using the TinkerCad circuits virtual environment in distance learning mode. A structured questionnaire was administered to students to map their knowledge of programming. The questionnaire consists of three emotional dimensions: enjoyment, satisfaction and motivation. The fourth dimension was dedicated to the students' programming outcomes. Three emotional dimensions were addressed to primary school students, while the fourth dimension was addressed to the tutors' observations toward the students' programming outcomes. The obtained results revealed that learning modes have no significant impact on students perceiving the programming issues. However, three emotional dimensions revealed a significant difference in the students' enjoyment, satisfaction and motivation in favor of the traditional learning mode. Our findings are of particular interest in light of possible crisis-prompted distance education in the future but can also serve to inform government institutions and policymakers seeking to develop effective concepts for successful distance learning. [ABSTRACT FROM AUTHOR]

Glass surfaces, although the first to be used for culturing ex vivo adherent cells, are not the perfect substrates for this purpose. Today, plastics dominate these applications, but in light of the global trend to reduce the use of synthetic polymers, it is reasonable to consider a return to glass vessels with coatings for these purposes. The ideal surface for cell growth is one that simulates the composition and structure of the mainly protein-based intercellular matrix. The work presented here shows a new idea of preparing porous protein coatings on glass using biosynthesis. The process utilizes the colonization of the gold nanoparticle-coated glass surface with Lactobacillus rhamnosus GG bacteria, followed by permeabilization (using ethanol) of their membrane and partial thermal degradation (at 160 °C in vacuum) of the surface-bound protein components of these microorganisms. It results in a development of coating on the glass that promotes mammalian cell growth, which has been preliminary confirmed using Vero cells. Subsequent steps in the formation of coating components were documented by reflectance ultraviolet and visible spectra and infrared spectroscopy. The presence of microorganisms and mammalian cells was confirmed using scanning electron and optical microscopy and crystalline violet staining. [ABSTRACT FROM AUTHOR]

This paper reports on a new approach to face verification in long-wavelength infrared radiation. Two face images were combined into one double image, which was then used as an input for a classification based on neural networks. For testing, we exploited two external and one homemade thermal face databases acquired in various variants. The method is reported to achieve a true acceptance rate of about 83%. We proved that the proposed method outperforms other studied baseline methods by about 20 percentage points. We also analyzed the issue of extending the performance of algorithms. We believe that the proposed double image method can also be applied to other spectral ranges and modalities different than the face. [ABSTRACT FROM AUTHOR]

The article aims to present the essence of agritourism in the literature regarding the subject of its profitability during the COVID-19 pandemic. To verify the goal, data from our own research was applied. The research was conducted in 2019 and 2020 with the exploratory survey method and an interview questionnaire. Thirty-two service providers running agritourism activities in randomly selected rural communes of the Podlaskie province (communes of Mielnik, Suchowola, Giby, Płaska, and Hajnówka) participated in the study. The Ward cluster analysis method was used to group the counties of the Podlaskie Province in terms of spatial differentiation in the development of agritourism. For this purpose, data provided by the Central Statistical Authority in Poland reported for 2019 and the primary data (research by M. Roman) was applied. In the first part of the article, the authors describe and explain the basic concepts of rural tourism and agritourism based on the literature. The figures were also quoted, for example, the number of agritourism farms in Poland and other European countries. The last part of the study provides the results of our own research. The study demonstrates that in 2020 agritourism was profitable, as the owners of the farms recorded a profit. The research confirms the massive impact of the COVID-19 pandemic on agritourism. During a pandemic, many people choose places with few people (e.g., rural areas). The research also considered the importance of innovation on agritourism farms and business profitability. The issues discussed in the study relate to current events—scientific studies examining the impact of COVID-19 on agritourism concern other countries; however, the authors were not able to find studies focusing on agritourism farms in Poland. A new element of methodology in this article was to organize the concepts of agritourism and to present the impact of coronavirus pandemic on the profitability of agritourism. It was also essential to present the classification of rural tourism. According to the authors of the study, the problems covered here are new and point to new trends in the development of agritourism during the pandemic. [ABSTRACT FROM AUTHOR]

The aim of the study is to identify and determine the role of microbial degradation taking place in dusty deposits in potential threats (i.e., destruction of protective coatings and development of corrosion) to the means of transport in conditions of transshipment of energy biomass. This paper presents the results of research on the impact of powdery fractions of wood biomass and biomass obtained from oil plants in the degradation of paint coatings and corrosion processes. During the research, exposure to simulated port climate, OM, SEM, and EDS studies were used. It has been found that the presence of the fraction containing protein compounds and amino acids (e.g., dust of rapeseed meal) stimulates the growth of microorganisms whose metabolism products favour the destruction of protective coatings and the development of corrosion. Under the same conditions, the destruction of protective zinc coatings has been observed. It was found that already 14 days of exposure to oily biomass deposits results in damage to paint coatings caused by microbiological processes. The 8-week exposure causes serious degradation of protective coatings and the base material itself. The biomass of wood origin, containing compounds of the tannin type, did not show as much aggressive activity as the biomass with protein compounds. [ABSTRACT FROM AUTHOR]

The main focus of this work was to establish a correlation between surface topography and chemistry and surface colonization by lactic acid bacteria. For this reason, we chose gold substrates with different surface architectures (i.e., smooth and nanorough) that were characterized by atomic force microscopy (AFM), electron scanning microscopy (SEM), and X-ray diffractometry (XRD). Moreover, to enhance biocompatibility, we modified gold substrates with polymeric monolayers, namely cationic dextran derivatives with different molar masses. The presence of those layers was confirmed by AFM, infrared spectroscopy (IR), and X-ray photoelectron spectroscopy (XPS). In order to determine the adhesion abilities of non-modified and modified gold surfaces, we tested three lactic acid bacteria (LAB) strains (i.e., Lactobacillus rhamnosus GG, Lactobacillus acidophilus, and Lactobacillus plantarum 299v). We have shown that surface roughness influences the surface colonization of bacteria, and the most significant impact on the growth was observed for the Lactobacillus rhamnosus GG strain. What is more, covering the gold surface with a molecular polymeric film by using the layer-by-layer (LbL) method allows additional changes in the bacterial growth, independently on the used strain. The well-being of the bacteria cells on tested surfaces was confirmed by using selective staining and fluorescence microscopy. Finally, we have determined the bacterial metabolic activity by measuring the amount of produced lactic acid regarding the growth conditions. The obtained results proved that the adhesion of bacteria to the metallic surface depends on the chemistry and topography of the surface, as well as the specific bacteria strain. [ABSTRACT FROM AUTHOR]

The microstructure of a René 108 Ni-based superalloy was systematically investigated by X-ray diffraction, light microscopy, energy-dispersive X-ray spectroscopy, and electron microscopy techniques. The material was investment cast in a vacuum and then solution treated (1200 °C-2h) and aged (900 °C-8h). The γ matrix is mainly strengthened by the ordered L12 γ′ phase, with the mean γ/γ′ misfit, δ, +0.6%. The typical dendritic microstructure with considerable microsegregation of the alloying elements is revealed. Dendritic regions consist of secondary and tertiary γ′ precipitates. At the interface of the matrix with secondary γ′ precipitates, nano M5B3 borides are present. In the interdendritic spaces additionally primary γ′ precipitates, MC and nano M23C6 carbides were detected. The γ′ precipitates are enriched in Al, Ta, Ti, and Hf, while channels of the matrix in Cr and Co. The highest summary concentration of γ′-formers occurs in coarse γ′ surrounding MC carbides. Borides M5B3 contain mostly W, Cr and Mo. All of MC carbides are enriched strongly in Hf and Ta, with the concentration relationship between these and other strong carbide formers depending on the precipitate's morphology. The nano M23C6 carbides enriched in Cr have been formed as a consequence of phase transformation MC + γ → M23C6 + γ′ during the ageing treatment. [ABSTRACT FROM AUTHOR]

This paper presents a novel approach to a complex process of electrical capacitance tomography (ECT) measurement data analysis. ECT is frequently employed for non-invasive monitoring of industrial process phenomena. Proposed methodology is based on the premeditated integration of the spatial and temporal relations inherent in the measurement records into the workflow of the analysis procedure. We propose a concept of interactive timeline that enables arranging data visualization according to the user's current focus along the process of analysis. We evaluated the proposed method using a prototype system in a task-based user study conducted with a group of domain experts. The evaluation is based on gravitational silo flow measurement datasets. Proposed prototype system enables diverse data manipulation in a more natural way allowing the user to switch back and forth between space and time domains along the data analysis trail. Experiments with the prototype system showed that the accuracy and completion times have significantly improved in comparison to the performance measured in the baseline condition. Additionally, the participants reported decreased physical load with improved efficiency measured with NASA task load index. Finally, a short discussion coupled with directions for the future of interactive spatio-temporal ECT measurement data analysis conclude the paper. [ABSTRACT FROM AUTHOR]

The chemical composition of standard Inconel 740 superalloy was modified by changes in the Al/Ti ratio (0.7, 1.5, 3.4) and addition of Ta (2.0, 3.0, 4.0%). Remelted Inconel 740 (A0) and nine variants with various chemical compositions were fabricated by lost-wax casting. The microstructure, microsegregation, phase transformation temperatures, thermal expansion coefficients and hardness of the superalloys were investigated by scanning electron microscopy, energy dispersive X-ray spectroscopy, differential scanning calorimetry, dilatometry and Vickers measurements. Typical dendritic microstructure was revealed with microsegregation of the alloying elements. Segregation coefficient ki for Ti, Nb and Ta did not exceed unity, and so precipitates enriched mainly in these elements were found in interdendritic spaces. The Nb-rich blocky precipitates, MC carbides, MN nitrides, oxides, and fine γ' was in all modified castings. Presence of other microstructural features, such as Ti-rich needles, eutectic γ-γ' islands, small Al-rich and Cr-rich precipitates depended on the casting composition. The lowest solidus and liquidus temperatures were observed in superalloys with a high Al/Ti ratio. Consequently, in A7–A9 variants, the solidification range did not exceed 100 °C. In the A0 variant the difference between liquidus and solidus temperature was 138 °C. Hardness of all modified superalloys was at least 50% higher than for the remelted Inconel 740 (209 HV10). [ABSTRACT FROM AUTHOR]

In situ X-ray diffraction and transmission electron microscopy has been used to investigate René 108 Ni-based superalloy after short-term annealing at high-homologous temperatures. Current work is focused on characterisation of γ′ precipitates, their volume fraction, evolution of the lattice parameter of γ and γ′ phases and misfit parameter of γ′ in the matrix. Material in the initial condition is characterised by a high-volume fraction (over 63%) of γ′ precipitates. Irregular distribution of alloying elements was observed. Matrix channels were strongly enriched in Cr, Co, W and Mo, whereas precipitates contain large amount of Al, Ti, Ta and Hf. Exposure to high-homologous temperatures in the range 1100–1250 °C led to the dissolution of the precipitates, which influenced the change of lattice parameter of both γ and γ′ phases. The lattice parameter of the matrix continuously grew during holding at high temperatures, which had a dominant influence on the more negative misfit coefficient. [ABSTRACT FROM AUTHOR]

The endocannabinoid system (ECS) is one of the most crucial systems in the human organism, exhibiting multi-purpose regulatory character. It is engaged in a vast array of physiological processes, including nociception, mood regulation, cognitive functions, neurogenesis and neuroprotection, appetite, lipid metabolism, as well as cell growth and proliferation. Thus, ECS proteins, including cannabinoid receptors and their endogenous ligands' synthesizing and degrading enzymes, are promising therapeutic targets. Their modulation has been employed in or extensively studied as a treatment of multiple diseases. However, due to a complex nature of ECS and its crosstalk with other biological systems, the development of novel drugs turned out to be a challenging task. In this review, we summarize potential therapeutic applications for ECS-targeting drugs, especially focusing on promising synthetic compounds and preclinical studies. We put emphasis on modulation of specific proteins of ECS in different pathophysiological areas. In addition, we stress possible difficulties and risks and highlight proposed solutions. By presenting this review, we point out information pivotal in the spotlight of ECS-targeting drug design, as well as provide an overview of the current state of knowledge on ECS-related pharmacodynamics and show possible directions for needed research. [ABSTRACT FROM AUTHOR]

1,25-dihydroxyvitamin D3 (1,25D3) is implicated in many cellular functions, including cell proliferation and differentiation, thus exerting potential antitumor effects. A major limitation for therapeutic use of 1,25D3 are potent calcemic activities. Therefore, synthetic analogs of 1,25D3 for use in anticancer therapy should retain cell differentiating potential, with calcemic activity being reduced. To obtain this goal, the analogs should effectively activate transcription of genes responsible for cell differentiation, leaving the genes responsible for calcium homeostasis less active. In order to better understand this phenomenon, we selected a series of structurally related 19-nor analogs of 1,25D (PRI-5100, PRI-5101, PRI-5105, and PRI-5106) and tested their activities in blood cells and in cells connected to calcium homeostasis. Affinities of analogs to recombinant vitamin D receptor (VDR) protein were not correlated to their pro-differentiating activities. Moreover, the pattern of transcriptional activities of the analogs was different in cell lines originating from various vitamin D-responsive tissues. We thus hypothesized that receptors which participate in transport of the analogs to the cells might contribute to the observed differences. In order to study this hypothesis, we produced renal cells with knock-out of the megalin gene. Our results indicate that megalin has a minor effect on semi-selective activities of vitamin D analogs. [ABSTRACT FROM AUTHOR]

This paper presents a novel method for tomographic measurement and data analysis based on crowdsourcing. X-ray radiography imaging was initially applied to determine silo flow parameters. We used traced particles immersed in the bulk to investigate gravitational silo flow. The reconstructed images were not perfect, due to inhomogeneous silo filling and nonlinear attenuation of the X-rays on the way to the detector. Automatic processing of such data is not feasible. Therefore, we used crowdsourcing for human-driven annotation of the trace particles. As we aimed to extract meaningful flow parameters, we developed a modified crowdsourcing annotation method, focusing on selected important areas of the silo pictures only. We call this method "targeted crowdsourcing", and it enables more efficient crowd work, as it is focused on the most important areas of the image that allow determination of the flow parameters. The results show that it is possible to analyze volumetric material structure movement based on 2D radiography data showing the location and movement of tiny metal trace particles. A quantitative description of the flow obtained from the horizontal and vertical velocity components was derived for different parts of the model silo volume. Targeting the attention of crowd workers towards either a specific zone or a particular particle speeds up the pre-processing stage while preserving the same quality of the output, quantified by important flow parameters. [ABSTRACT FROM AUTHOR]

An azaphenothiazine derivative, 6-chloroethylureidoethyldiquino[3,2-b;2′,3′-e][1,4]thiazine (DQT), has recently been shown to exhibit immunosuppressive activities in mouse models. It also inhibited the expression of CXCL10 at the protein level, at non-toxic concentrations, in the culture of KERTr cells treated with double-stranded RNA, poly(I:C). In this report, we demonstrated that DQT inhibits the transcription of the CXCL10 gene. Although CXCL10 is an IFNγ-inducible protein, we found that the CXCL10 protein was induced without the detectable release of IFNγ or IκB degradation. Hence, we concluded that IFNγ or NFκB was not involved in the regulation of the CXCL10 gene in KERTr cells transfected with poly(I:C), nor in the inhibitory activity of DQT. On the other hand, we found that IFNβ was induced under the same conditions and that its expression was inhibited by DQT. Kinetic analysis showed that an increase in IFNβ concentrations occurred 4–8 h after poly(I:C) treatment, while the concentration of CXCL10 was undetectable at that time and started to increase later, when IFNβ reached high levels. Therefore, DQT may be regarded as a new promising inhibitor of IFNβ expression and IFNβ-dependent downstream genes and proteins, e.g., CXCL10 chemokine, which is implicated in the pathogenesis of autoimmune diseases. [ABSTRACT FROM AUTHOR]