Search

Using industrial by-products to replace cement is an important way to reduce carbon emissions in the cement industry. The purpose of this article is to understand the effect of quartz powder on the properties of cement-based materials. Experimental studies were conducted on the macroscopic and microscopic properties of cement-based materials mixed with quartz powder to evaluate their feasibility as a replacement for cement. The substitution rates of quartz powder were 0% (Qu0), 7.5% (Qu7.5), and 15% (Qu15). The test time was from 1 day to 28 days, and the main results are as follows: In the early stage of the hydration reaction, as the amount of quartz powder substitution increases, the cumulative hydration heat increases. This is mainly because the nucleation effect of quartz powder accelerates the hydration reaction of cement. In the later stage of the hydration reaction, as the amount of quartz powder substitution increases, the cumulative heat of hydration decreases. This is mainly due to the diluting effect of quartz powder. For Qu0, Qu7.5, and Qu15, the decrease in compressive strength after 1 day is not obvious. The decrease in compressive strength at 28 days is more obvious. Overall, there are exponential relationships between the UPV measurement or surface resistivity results and the compressive strength measurement results at 1, 3, 7, and 28 days. The XRD test results show that the main products of the reaction are AFt, CH, Hc, and Mc. From Day 1 to Day 28, the content of Mc becomes evident. The test results for TG showed that, as the amount of quartz powder substitution increases, the mass loss decreases. For different specimens of Qu0, Qu7.5, and Qu15 at different test times (3 and 28 days), there is an exponential function relationship between chemically bound water and strength. A numerical hydration model is proposed for cement–quartz binary blends. The parameters of the hydration model are determined based on the hydration heat normalized by the cement mass. Moreover, the hydration heat at 28 days is calculated using the proposed model. The strength development of all specimens and all test ages can be expressed as an exponential function of hydration heat. [ABSTRACT FROM AUTHOR]

Replacing cement with industrial by-products is an important way to achieve carbon neutrality in the cement industry. The purpose of this study is to evaluate the effect of eggshell powder on cement hydration properties, and to evaluate its feasibility as a substitute for cement. The substitution rates of eggshell powder are 0%, 7.5%, and 15%. Studying the heat of hydration and macroscopic properties can yield the following results. First: The cumulative heat of hydration based on each gram of cementitious material falls as the eggshell powder content rises. This is a result of the eggshell powder's diluting action. However, the cumulative heat of hydration per gram of cement rises due to the nucleation effect of the eggshell powder. Second: The compressive strengths of ES0, ES7.5, and ES15 samples at 28 days of age are 54.8, 43.4, and 35.5 MPa, respectively. Eggshell powder has a greater negative impact on the compressive strength. The effect of eggshell powder on the speed and intensity of ultrasonic waves has a similar trend. Third: As the eggshell powder content increases, the resistivity gradually decreases. In addition, we also characterize the microscopic properties of the slurry with added eggshell powder. X-ray Diffraction (XRD) shows that, as the age increases from 1 day to 28 days, hemicaboaluminate transforms into monocaboaluminate. As the content of the eggshell powder increases, FTIR analysis finds a slight decrease in the content of CSH. Similarly, thermogravimetric (TG) results also show a decrease in the production of calcium hydroxide. Although the additional nucleation effect of eggshell powder promotes cement hydration and generates more portlandite, it cannot offset the loss of portlandite caused by the decrease in cement. Last: A numerical hydration model is presented for cement–eggshell powder binary blends. The parameters of the hydration model are determined based on hydration heat normalized by cement mass. Moreover, the hydration heat until 28 days is calculated using the proposed model. The strength development of all specimens and all test ages can be expressed as an exponential function of hydration heat. [ABSTRACT FROM AUTHOR]

(+)-JQ1, a specific chemical inhibitor of bromodomain and extraterminal (BET) family protein 4 (BRD4), has been reported to inhibit smooth muscle cell (SMC) proliferation and mouse neointima formation via BRD4 regulation and modulate endothelial nitric oxide synthase (eNOS) activity. This study aimed to investigate the effects of (+)-JQ1 on smooth muscle contractility and the underlying mechanisms. Using wire myography, we discovered that (+)-JQ1 inhibited contractile responses in mouse aortas with or without functional endothelium, reducing myosin light chain 20 (LC20) phosphorylation and relying on extracellular Ca2+. In mouse aortas lacking functional endothelium, BRD4 knockout did not alter the inhibition of contractile responses by (+)-JQ1. In primary cultured SMCs, (+)-JQ1 inhibited Ca2+ influx. In aortas with intact endothelium, (+)-JQ1 inhibition of contractile responses was reversed by NOS inhibition (L-NAME) or guanylyl cyclase inhibition (ODQ) and by blocking the phosphatidylinositol 3-kinase (PI3K)/protein kinase B (AKT) pathway. In cultured human umbilical vein endothelial cells (HUVECs), (+)-JQ1 rapidly activated AKT and eNOS, which was reversed by PI3K or ATK inhibition. Intraperitoneal injection of (+)-JQ1 reduced mouse systolic blood pressure, an effect blocked by co-treatment with L-NAME. Interestingly, (+)-JQ1 inhibition of aortic contractility and its activation of eNOS and AKT were mimicked by the (−)-JQ1 enantiomer, which is structurally incapable of inhibiting BET bromodomains. In summary, our data suggest that (+)-JQ1 directly inhibits smooth muscle contractility and indirectly activates the PI3K/AKT/eNOS cascade in endothelial cells; however, these effects appear unrelated to BET inhibition. We conclude that (+)-JQ1 exhibits an off-target effect on vascular contractility. [ABSTRACT FROM AUTHOR]

There is a lack of scientific understanding of adding an oyster shell powder (OSP) to geopolymer concrete. The purpose of this study is: (1) to evaluate the high-temperature resistance of the alkali-activated slag ceramic powder (CP) mixture added with OSP at different temperatures, (2) to address the lack of application of environmentally friendly building materials, and (3) to reduce solid waste of OSP pollution and protect the environment. OSP replaces granulated blast furnace slag (GBFS) and CP at 10% and 20% (based on binder), respectively. The mixture was heated to 400.0, 600.0, and 800.0 °C after curing for 180 days. The results of the experiment are summarized as follows: (1) The thermogravimetric (TG) results indicated that the OSP20 samples produced more CASH gels than the control OSP0. (2) As the temperature increased, the compressive strength and ultrasonic pulse velocity (UPV) both decreased. (3) Fourier transform infrared spectroscopy (FTIR) and X-ray diffraction (XRD) results reveal that the mixture undergoes a phase transition at 800.0 °C, and compared with the control OSP0, OSP20 undergoes a different phase transition. (4) The size change and appearance image results indicate that the mixture with added OSP inhibits shrinkage, and calcium carbonate decomposes to produce off-white CaO. To sum up, adding OSP can effectively reduce the damage of high temperatures (800.0 °C) on the properties of alkali-activated binders. [ABSTRACT FROM AUTHOR]

The emergence of immunotherapy has dramatically changed the cancer treatment paradigm and generated tremendous promise in precision medicine. However, cancer immunotherapy is greatly limited by its low response rates and immune-related adverse events. Transcriptomics technology is a promising tool for deciphering the molecular underpinnings of immunotherapy response and therapeutic toxicity. In particular, applying single-cell RNA-seq (scRNA-seq) has deepened our understanding of tumor heterogeneity and the microenvironment, providing powerful help for developing new immunotherapy strategies. Artificial intelligence (AI) technology in transcriptome analysis meets the need for efficient handling and robust results. Specifically, it further extends the application scope of transcriptomic technologies in cancer research. AI-assisted transcriptomic analysis has performed well in exploring the underlying mechanisms of drug resistance and immunotherapy toxicity and predicting therapeutic response, with profound significance in cancer treatment. In this review, we summarized emerging AI-assisted transcriptomic technologies. We then highlighted new insights into cancer immunotherapy based on AI-assisted transcriptomic analysis, focusing on tumor heterogeneity, the tumor microenvironment, immune-related adverse event pathogenesis, drug resistance, and new target discovery. This review summarizes solid evidence for immunotherapy research, which might help the cancer research community overcome the challenges faced by immunotherapy. [ABSTRACT FROM AUTHOR]

The carbon peaking of cement-based materials refers to the point at which CO SB 2 sb emissions from the cement industry reach their highest level and gradually decline. The cement industry plays a significant role in global carbon emissions, accounting for approximately 8% of global anthropogenic carbon dioxide (CO SB 2 sb ) emissions [[1]]. When the amount of fly ash beads is 0.45 (fly ash beads/binder) and the amount of high-strength polyethylene is 1%, the cost is reduced by 40% and the carbon emission is reduced by 36%. [Extracted from the article]

To investigate the underlying mechanisms of low metabolic activity of primary chondrocytes obtained from girls with adolescent idiopathic scoliosis (AIS); AIS is a spine-deforming disease that often occurs in girls. AIS is associated with a lower bone mass than that of healthy individuals and osteopenia. Leptin was shown to play an important role in bone growth. It can also regulate the function of chondrocytes. Changes in leptin and Ob-R levels in AIS patients have been reported in several studies. The underlying mechanisms between the dysfunction of peripheral leptin signaling and abnormal chondrocytes remain unclear; The following parameters were evaluated in AIS patients and the control groups: total serum leptin levels; Ob-R expression in the plasma membrane of primary chondrocytes; JAK2 and STAT3 phosphorylation status. Then, we inhibited the lysosome and proteasome and knocked down clathrin heavy chain (CHC) expression in primary chondrocytes isolated from girls with AIS and evaluated Ob-R expression. We investigated the effects of leptin combined with a lysosome inhibitor or CHC knockdown in primary chondrocytes obtained from AIS patients; Compared with the controls, AIS patients showed similar total serum leptin levels, reduced JAK2 and STAT3 phosphorylation, and decreased cartilage matrix synthesis in the facet joint. Lower metabolic activity and lower membrane expression of Ob-R were observed in primary chondrocytes from the AIS group than in the controls. Lysosome inhibition increased the total Ob-R content but had no effect on the membrane expression of Ob-R or leptin's effects on AIS primary chondrocytes. CHC knockdown upregulated the membrane Ob-R levels and enhanced leptin's effects on AIS primary chondrocytes; The underlying mechanism of chondrocytes that are hyposensitive to leptin in some girls with AIS is low plasma membrane Ob-R expression that results from an imbalance between the rate of receptor endocytosis and the insertion of newly synthesized receptors into the membrane. [ABSTRACT FROM AUTHOR]

This paper presents the effects of alkali-activated blast furnace slag and fly ash (AASF) paste added with waste ceramic powder (WCP) on mechanical properties, weight loss, mesoscopic cracks, reaction products, and microstructure when exposed to 300, 600, and 900 °C. Using waste ceramic powder to replace blast furnace slag and fly ash, the replacement rate was 0–20%. The samples cured at 45 °C for 28 days were heated to 300, 600, and 900 °C to determine the residual compressive strength and weight loss at the relevant temperature. We evaluated the deterioration of the paste at each temperature through mesoscopic images, ultrasonic pulse velocity (UPV), thermogravimetric analysis (TG), Fourier transform infrared (FTIR) spectroscopy, X-ray diffraction (XRD), and with a scanning electron microscope (SEM). Relevant experimental results show that: (1) with the increase in waste ceramic powder content, the compressive strength of samples at various temperatures increased, and at 300 °C, the compressive strength of all the samples reached the highest value; (2) the residual weight increased with the increase in the content of the waste ceramic powder; (3) with a further increase in temperature, all the samples produced more mesoscopic cracks; (4) at each temperature, with the rise in waste ceramic powder content, the value of the ultrasonic pulse velocity increased; (5) the TG results showed that, as the content of waste ceramic powder increased, the formation of C-A-S-H gel and hydrotalcite decreased; (6) XRD and FTIR spectra showed that, at 900 °C, the use of waste ceramic powder reduced the formation of harmful crystalline phases; (7) the SEM image showed that, at 900 °C, as the content of waste ceramic powder increased, the compactness of the sample was improved. In summary, the addition of waste ceramic powder can improve the mechanical properties of the alkali-activated paste at high temperatures, reduce the occurrence of cracks, and make the microstructure denser. [ABSTRACT FROM AUTHOR]

Four new oleanene-type triterpenoid saponins together with six known saponins were isolated from the roots of Pulsatilla cernua and their structures were elucidated on the basis of spectroscopic data, including 2D NMR spectra and chemical evidence. Among these one of the aglycones (gypsogenin) is reported for the first time from this genus. Some of these compounds showed significant neuroprotective effects against the cytotoxicity induced by β-amyloid25-35 (Aβ25-35) on human neuroblastoma SH-SY5Y cells. [ABSTRACT FROM AUTHOR]

Every year, ceramic tile factories and the iron smelting industry produce huge amounts of waste ceramic tiles and blast furnace slag (BFS), respectively. In the field of construction materials, this waste can be used as a raw material for binders, thus reducing landfill waste and mitigating environmental pollution. The purpose of this study was to mix waste ceramic powder (WCP) into BFS paste and mortar activated by sodium silicate and sodium hydroxide to study its effect on performance. BFS was partially replaced by WCP at the rate of 10–30% by weight. Some experimental studies were conducted on, for example, the fluidity, heat of hydration, compressive strength testing, ultrasonic pulse velocity (UPV), Fourier transform infrared spectroscopy (FTIR), X-ray diffraction (XRD), electrical resistivity, sulfuric acid attack, and chloride ion diffusion coefficient. Based on the results of these experiments, the conclusions are: (1) increasing the amount of waste ceramic powder in the mixture can improve the fluidity of the alkali-activated paste; (2) adding waste ceramic powder to the alkali-activated mortar can improve the resistance of the mortar to sulfuric acid; (3) adding waste ceramic powder to the alkali-activated mortar can increase the diffusion coefficient of chloride ions; (4) the early strength of alkali-activated mortar is affected by the Ca/Si ratio, while the later strength is affected by the change in the Si/Al ratio. [ABSTRACT FROM AUTHOR]

Multidrug resistance in Pseudomonas aeruginosa is a noticeable and ongoing major obstacle for inhibitor design. In P. aeruginosa, uridine diphosphate N-acetylglucosamine (UDP-GlcNAc) acetyltransferase (PaLpxA) is an essential enzyme of lipid A biosynthesis and an attractive drug target. PaLpxA is a homotrimer, and the binding pocket for its substrate, UDP-GlcNAc, is positioned between the monomer A–monomer B interface. The uracil moiety binds at one monomer A, the GlcNAc moiety binds at another monomer B, and a diphosphate form bonds with both monomers. The catalytic residues are conserved and display a similar catalytic mechanism across orthologs, but some distinctions exist between pocket sizes, residue differences, substrate positioning and specificity. The analysis of diversified pockets, volumes, and ligand positions was determined between orthologues that could aid in selective inhibitor development. Thenceforth, a complex-based pharmacophore model was generated and subjected to virtual screening to identify compounds with similar pharmacophoric properties. Docking and general Born-volume integral (GBVI) studies demonstrated 10 best lead compounds with selective inhibition properties with essential residues in the pocket. For biological access, these scaffolds complied with the Lipinski rule, no toxicity and drug likeness properties, and were considered as lead compounds. Hence, these scaffolds could be helpful for the development of potential selective PaLpxA inhibitors. [ABSTRACT FROM AUTHOR]

This paper compares the effects of the water-to-binder (w/b) ratio and quartz contents on the properties of cement–quartz paste. The w/b ratios of the paste mixtures specimens are 0.5 and 0.2, and the quartz powder contents are 0, 10, and 20%. At the age of 1, 3, 7, and 28 days, compressive strength test, X-ray fluorescence (XRF) spectroscopy, X-ray diffraction (XRD), mercury intrusion porosimetry (MIP), scanning electron microscopy (SEM), isothermal calorimetry, and thermogravimetric (TG) analysis were performed. The experimental results show that the quartz powder mainly has the dilution effect and crystal nucleation effect on cement hydration, and the addition of quartz powder does not change the type of hydration product. The effect of quartz powder on cement hydration is closely related to the w/b ratio. In the case of a low w/b ratio of 0.2, the addition of quartz powder did not impair the compressive strength of paste. For different w/b ratios (0.5 and 0.2) and various quartz powder contents (0, 10, and 20%) at different ages (1, 3, 7, and 28 days), there is a uniform linear relationship between strength and porosity. Similarly, there is a uniform linear relationship between chemically bound water and calcium hydroxide, between heat of hydration and compressive strength, and between chemically bound water and compressive strength. At the same time, the effect of the partial replacement of cement by quartz powder on sustainability is considered in this paper. [ABSTRACT FROM AUTHOR]