Search

Motion reconstruction using wearable sensors enables broad opportunities for gait analysis outside laboratory environments. Inertial Measurement Unit (IMU)-based foot trajectory reconstruction is an essential component of estimating the foot motion and user position required for any related biomechanics metrics. However, limitations remain in the reconstruction quality due to well-known sensor noise and drift issues, and in some cases, limited sensor bandwidth and range. In this work, to reduce drift in the height direction and handle the impulsive velocity error at heel strike, we enhanced the integration reconstruction with a novel kinematic model that partitions integration velocity errors into estimates of acceleration bias and heel strike vertical velocity error. Using this model, we achieve reduced height drift in reconstruction and simultaneously accomplish reliable terrain determination among level ground, ramps, and stairs. The reconstruction performance of the proposed method is compared against the widely used Error State Kalman Filter-based Pedestrian Dead Reckoning and integration-based foot-IMU motion reconstruction method with 15 trials from six subjects, including one prosthesis user. The mean height errors per stride are 0.03 ± 0.08   c m on level ground, 0.95 ± 0.37   c m on ramps, and 1.27 ± 1.22   c m on stairs. The proposed method can determine the terrain types accurately by thresholding on the model output and demonstrates great reconstruction improvement in level-ground walking and moderate improvement on ramps and stairs. [ABSTRACT FROM AUTHOR]

We evaluated 18 methods capable of identifying initial contact (IC) and terminal contact (TC) gait events during human running using data from a single wearable sensor on the shank or sacrum. We adapted or created code to automatically execute each method, then applied it to identify gait events from 74 runners across different foot strike angles, surfaces, and speeds. To quantify error, estimated gait events were compared to ground truth events from a time-synchronized force plate. Based on our findings, to identify gait events with a wearable on the shank, we recommend the Purcell or Fadillioglu method for IC (biases +17.4 and −24.3 ms; LOAs −96.8 to +131.6 and −137.0 to +88.4 ms) and the Purcell method for TC (bias +3.5 ms; LOAs −143.9 to +150.9 ms). To identify gait events with a wearable on the sacrum, we recommend the Auvinet or Reenalda method for IC (biases −30.4 and +29.0 ms; LOAs −149.2 to +88.5 and −83.3 to +141.3 ms) and the Auvinet method for TC (bias −2.8 ms; LOAs −152.7 to +147.2 ms). Finally, to identify the foot in contact with the ground when using a wearable on the sacrum, we recommend the Lee method (81.9% accuracy). [ABSTRACT FROM AUTHOR]

Background and Objectives: Acquiring knowledge about the magnitude and direction of induced joint forces during modifying gait strategies is critical for proper exercise prescription. The present study aimed to evaluate whether a heel-first strike pattern during gait can affect the biomechanical characteristics of ankle and knee joints among asymptomatic people. Materials and Methods: In this cross-sectional study performed in the biomechanics laboratory, 13 professional healthy male athletes walked on an instrumented walkway under two walking conditions. For the normal condition, subjects were instructed to walk as they normally would. For the heel-first strike condition, subjects were instructed to walk with heel-first strike pattern and increase heel contact duration as much as possible. Then, knee and ankle joint range of motions and moments, as well as vertical ground reaction force was measured by the Kistler force plate and Vicon motion analysis system. Results: Knee flexion angle at the initial contact and during stance phase was significantly lower when increasing the heel strike pattern. In addition, the mean values of the knee external rotation and adductor moments during heel strike condition were lower than those in normal walking. Further, the ankle dorsiflexion range of motion (ROM) during mid-stance increased significantly during heel-first strike pattern compared to the value in normal gait pattern. Conclusions: The modification of gait pattern including heel-first strike pattern can reduce the mechanical load applied to the knee, while improving the extensibility of gastro-soleus muscle complex. [ABSTRACT FROM AUTHOR]

(1) Background: The femoroacetabular impingement (FAI) type cam leads to a conflict between the acetabular rim and a bony thickening of the femoral neck junction. While maximal excursions in flexion, adduction and internal rotation provoke pain, the aim of this study was to analyze if a cam morphology shows an impact on gait pattern. (2) Methods: Fifty-five patients with end-stage hip osteoarthritis performed gait analysis before hip replacement as well as three, six and 12 months postoperatively. Thirty-three (60%) of them presented an FAI type cam. An ANOVA was used to compare the hip angles in sagittal, frontal and transversal planes between patients with a FAI type cam (group "+cam") and without (group "−cam"). (3) Results: Before surgery the patients of the +cam-group showed a tendency towards a reduced flexion and internal rotation at the heel strike (p > 0.05). Over time, the differences were adjusted by total hip arthroplasty. (4) Conclusions: We did not find any differences in the gait analysis of patients with a FAI type cam compared to patients without. [ABSTRACT FROM AUTHOR]