Search

With the transformation of the trend of vehicle electrification, the overall noise level in the vehicle is gradually reduced. The problem of low-frequency noise in the vehicle, which was previously ignored, is becoming more and more prominent. To solve the vehicle low-frequency noise problem, a combination of real-vehicle tests and simulation analysis is carried out. During the test, the driver and passengers feel that there is a relatively obvious low-frequency roar noise in the car, which results from the structural radiation noise of the trunk door vibration. Therefore, to solve this problem, we design an acoustic metamaterial with lightweight and miniaturized features based on the local resonance principle of phononic crystals. Firstly, the selection of the resonant unit configuration and the design of the band gap are implemented. Then, the layout planning of the whole vehicle, the layout of the resonance unit and the design of the base frame are implemented. The actual vehicle test results show that: after attaching the designed acoustic metamaterial, the low-frequency noise sound pressure levels in the front and rear of the vehicle were reduced by 2.0 dB (A) and 2.3 dB (A), respectively, meanwhile, the interior noise sound quality was improved. The sound pressure level at the driver's right ear in the car has an abnormal peak of around 35Hz. In addition, the driver and passengers feel that there is a relatively obvious low-frequency roar noise in the car, and through low-pass filtering of the collected signals, it is confirmed that the peak frequency is the main cause of the low-frequency roar in the car. The low-frequency steady-state noise of the car is generally considered to be the low-frequency vibration of the body panel and the radiation occurs. Through the finite element simulation analysis (Grid Participation Analysis) of the abnormal peak frequency, the results show that the low-frequency roar is caused by the low-frequency vibration of the tailgate sheet metal, and the problem peak frequency is not coupled with the acoustic cavity mode. Facing the problem of the low-frequency roar radiated into the car by the vibration of the tailgate sheet metal parts, based on the local resonance band gap theory, we developed a design to suppress the 35 Hz vibration of the tailgate sheet metal parts and meet the characteristics of lightweight and miniaturization. By attaching the acoustic metamaterial to the tailgate and performing CAE simulation of the whole vehicle, it is determined that the structure can indeed reduce the 35 Hz noise in the car and the peak value of the tailgate sheet metal vibration. [ABSTRACT FROM AUTHOR]

Frictionally induced vibrations in rubber are readily triggered due to their lower stiffness and higher elasticity. This study developed a numerical model to investigate the frictional vibration of a rubber block with a groove on its side surface against an aluminum disc. The results indicate that a backside groove (GB) on the block significantly enhances vibration attenuation, with a decay time 0.6 s faster than a non-grooved (NG) block, despite a potentially higher initial vibrational amplitude. In contrast, a frontside groove (GF) results in persistent frictional oscillations, with the steady-state time being similar for both GB and GF configurations. The underlying mechanism is attributed to the GB's effectiveness in reducing the maximum energy imparted to the block initially, dissipating vibrational energy more swiftly, and distributing the contact stress more uniformly. The discrepancies in frictional forces between the conducted experiment and the simulation for the NG, GB and GF cases were 11.3%, 9.3% and 12.1%, respectively, quantitatively indicating the moderate precision of the results from the simulation. The insights gained from this study hold promise for enriching methods of mitigating vibrations arising from rubber friction. [ABSTRACT FROM AUTHOR]

Since the cell was discovered by humans, it has been an important research subject for researchers. The mechanical response of cells to external stimuli and the biomechanical response inside cells are of great significance for maintaining the life activities of cells. These biomechanical behaviors have wide applications in the fields of disease research and micromanipulation. In order to study the mechanical behavior of single cells, various cell mechanics models have been proposed. In addition, the measurement technologies of single cells have been greatly developed. These models, combined with experimental techniques, can effectively explain the biomechanical behavior and reaction mechanism of cells. In this review, we first introduce the basic concept and biomechanical background of cells, then summarize the research progress of internal force models and experimental techniques in the field of cell mechanics and discuss the latest mechanical models and experimental methods. We summarize the application directions of cell mechanics and put forward the future perspectives of a cell mechanics model. [ABSTRACT FROM AUTHOR]

Alternative splicing (AS) plays a crucial role in regulating gene expression, function, and diversity. However, limited reports exist on the identification and comparison of AS in Eastern and Western pigs. Here, we analyzed 243 transcriptome data from eight tissues, integrating information on transcription factors (TFs), selection signals, splicing factors (SFs), and quantitative trait loci (QTL) to comprehensively study alternative splicing events (ASEs) in pigs. Five ASE types were identified, with Mutually Exclusive Exon (MXE) and Skipped Exon (SE) ASEs being the most prevalent. A significant portion of genes with ASEs (ASGs) showed conservation across all eight tissues (63.21–76.13% per tissue). Differentially alternative splicing genes (DASGs) and differentially expressed genes (DEGs) exhibited tissue specificity, with blood and adipose tissues having more DASGs. Functional enrichment analysis revealed coDASG_DEGs in adipose were enriched in pathways associated with adipose deposition and immune inflammation, while coDASG_DEGs in blood were enriched in pathways related to immune inflammation and metabolism. Adipose deposition in Eastern pigs might be linked to the down-regulation of immune-inflammation-related pathways and reduced insulin resistance. The TFs, selection signals, and SFs appeared to regulate ASEs. Notably, ARID4A (TF), NSRP1 (SF), ANKRD12, IFT74, KIAA2026, CCDC18, NEXN, PPIG, and ROCK1 genes in adipose tissue showed potential regulatory effects on adipose-deposition traits. NSRP1 could promote adipogenesis by regulating alternative splicing and expression of CCDC18. Conducting an in-depth investigation into AS, this study has successfully identified key marker genes essential for pig genetic breeding and the enhancement of meat quality, which will play important roles in promoting the diversity of pork quality and meeting market demand. [ABSTRACT FROM AUTHOR]

The National Key Ecological Function Zones (NKEFZ) serve as crucial ecological security barriers in China, playing a vital role in enhancing ecosystem services. This study employed the theoretical framework of ecological benefits assessment in major ecological engineering projects. The primary focus was on the ecosystem macrostructure, ecosystem quality, and key ecosystem services, enabling quantitative analysis of the spatiotemporal changes in the ecosystem status of the NKEFZ from 2000 to 2019. To achieve this, remote sensing data, meteorological data, and model simulations were employed to investigate five indicators, including land use types, vegetation coverage, net primary productivity of vegetation, soil conservation services, water conservation services, and windbreak and sand fixation services. The analysis incorporated the Theil–Sen Median method to construct an evaluation system for assessing the restoration status of ecosystems, effectively integrating ecosystem quality and ecosystem services indicators. The research findings indicated that land use changes in NKEFZ were primarily characterized by the expansion of unused land and the in of grassland. The overall ecosystem quality of these zones improved, showing a stable and increasing trend. However, there were disparities in the changes related to ecosystem services. Water conservation services exhibited a decreasing trend, while soil conservation and windbreak and sand fixation services showed a steady improvement. The ecosystem of the NKEFZ, in general, displayed a stable and recovering trend. However, significant spatial heterogeneity existed, particularly in the southern region of the Qinghai–Tibet Plateau and at the border areas between western Sichuan and northern Yunnan, where some areas still experienced deteriorating ecosystem conditions. Compared to other functional zones, the trend in the ecosystem of the NKEFZ might not have been the most favorable. Nonetheless, this could be attributed to the fact that most of these areas were situated in environmentally fragile regions, and conservation measures may not have been as effective as in other functional zones. These findings highlighted the considerable challenges ahead in the construction and preservation of the NKEFZ. In future development, the NKEFZ should leverage their unique natural resources to explore distinctive ecological advantages and promote the development of eco-friendly economic industries, such as ecological industry, ecological agriculture, and eco-tourism, transitioning from being reliant on external support to self-sustainability. [ABSTRACT FROM AUTHOR]

This study applied concentrated xylose (60–250 g/L) medium to produce butanol (acetone butanol ethanol, or ABE). A control batch fermentation of 61 g/L initial glucose using Clostridium beijerinckii P260 resulted in a productivity and yield of 0.33 g/L·h and 0.43 g/g, respectively. Use of 60 g/L xylose in a batch system resulted in productivity and yield of 0.26 g/L·h, and 0.40 g/g, respectively. In these two experiments, the culture fermented 89.3% glucose and 83.6% of xylose, respectively. When ABE recovery was coupled with fermentation for continuous solvent removal, the culture fermented all the added xylose (60 g/L). This system resulted in a productivity and yield of 0.66 g/L·h and 0.44 g/g, respectively. When the sugar concentration was further increased above 100 g/L, only a small fraction of the sugar was fermented in batch cultures without product removal. However, with simultaneous product removal, all the xylose (150 g/L) was fermented provided the culture was fed with nutrients intermittently. In this system, 66.32 g/L ABE was produced from 150 g/L xylose with a productivity of 0.44 g/L·h and yield of 0.44 g/g. Using the integrated culture system allowed sugar consumption to be increased by 300% (150 g/L). The continuous system using xylose as a feed did not sustain and after 36 days (864 h) of fermentation, it produced only 2–3 g/L ABE. Rather, the culture became acidogenic and produced 4–5 g/L acids (acetic and butyric). This study suggested that xylose be fermented in batch reactors coupled with simultaneous product recovery rather than in continuous reactors. [ABSTRACT FROM AUTHOR]

To investigate the tribological performance of a copper alloy engine bearing under oil lubrication, seawater corrosion and dry sliding wear, three different PI/PAI/EP coatings consisting of 1.5 wt% Ce2O3, 2 wt% Ce2O3, 2.5 wt% Ce2O3 were designed, respectively. These designed coatings were prepared on the surface of CuPb22Sn2.5 copper alloy using a liquid spraying process. The tribological properties of these coatings under different working conditions were tested. The results show that the hardness of the coating decreases gradually with the addition of Ce2O3, and the agglomeration of Ce2O3 is the main reason for the decrease of hardness. The wear amount of the coating increases first and then decreases with the increase of Ce2O3 content under dry sliding wear. The wear mechanism is abrasive wear under the condition of seawater. The wear resistance of the coating decreases with the increase of Ce2O3 content. The wear resistance of the coating with 1.5 wt% Ce2O3 is the best under-seawater corrosion. Although Ce2O3 has corrosion resistance, the coating of 2.5 wt% Ce2O3 has the worst wear resistance under seawater conditions due to severe wear caused by agglomeration. Under oil lubrication conditions, the frictional coefficient of the coating is stable. The lubricating oil film has a good lubrication and protection effect. [ABSTRACT FROM AUTHOR]

The Three-River Headwaters Region (TRHR) is an important part of the ecological security barrier of the Qinghai–Tibet Plateau in China. Twenty years after the implementation of the TRHR ecological protection and construction project, the restoration degree and restoration potential of its major ecosystem services still lack clear quantification. In this paper, taking the core area of the nature reserve as the climax background of the TRHR zonal ecosystem, based on the multiple regression analysis (MLR) and model parameter control method based on the eco-geographical area, ecosystem types, and climate factors; the climax background, restoration degree, and restoration potential of TRHR's water retention (WR), soil retention (SR), and windbreak and sand fixation (WD) services were quantitatively researched. The main conclusions were as follows: (1) The evaluation method of climax background, restoration degree, and restoration potential based on fractional vegetation cover (FVC) can accurately quantify the regional differences of the restoration degree and restoration potential of TRHR's key ecosystem-regulating services. The restoration degree and restoration potential of WR and SR services showed a spatial pattern of high in the southeast and low in the northwest, and the restoration degree and restoration potential of WD services showed a spatial pattern of high in the west and low in the east, which was closely related to natural conditions such as precipitation and wind speed. (2) The proportion of restoration potential to climax background for WR, SR, and WD services were 48.38%, 62.15%, and 56.37%, respectively. (3) The implementation of the TRHR ecological project in the future should focus on the vicinity of the 400 mm dry and wet zone dividing line, as well as in the southeastern mountains, hills, and river valleys, to carry out degraded vegetation restoration and soil and water conservation measures to improve ecosystem services. Near-natural restoration measures should be considered in Zhiduo and Geermu in the western part of the TRHR, where wind erosion is high, and the restoration goals of ecological projects should be formulated in combination with local climatic conditions and restoration potential. [ABSTRACT FROM AUTHOR]

The Three-River Headwaters Region (TRHR) is an important part of the ecological barrier of the Qinghai–Tibet Plateau. Understanding the TRHR's major ecosystem service trade-offs and synergies is important for scientifically integrating and optimizing ecosystem services. We studied the spatial–temporal changes, trade-offs and synergies of the TRHR's water retention (WR), soil retention (SR), windbreak and sand fixation (WD) and forage supply (FS) services from 2000 to 2019. The results showed that: (1) The TRHR's WR, SR and FS services gradually decreased from east to west in space, and showed an increasing trend between years; the WD service gradually decreased from west to east in space, and showed a downward trend between years. (2) The synergistic relationship was the dominant relationship between the TRHR's grassland regulation and provision services. Future research on ecosystem service trade-offs and synergies should consider both the type of ecosystem services and the ecosystem's multifunctionality. (3) The improvement of the TRHR's ecosystem services in the future needs to focus on improving the fraction vegetation coverage (FVC) through ecological engineering measures in Maduo, and other areas near the 400 mm precipitation line, and enhancing the synergy of ecosystem services. (4) The restoration of TRHR FVC needs to consider the difference in natural endowments. It is recommended to adopt near-natural restoration in the northwest of the TRHR, and avoid setting too high restoration targets. Planting high-quality pastures in the southeast of the TRHR with good water and heat conditions and rationally allocating grassland ecological and production functions are recommended measures. (5) The TRHR's grassland should give priority to the development of the ecological functions of natural grasslands, and then give full play to its production functions. Overgrazing is strictly prohibited, so as to avoid the "over-transformation" of ecosystem regulation services to supply services. [ABSTRACT FROM AUTHOR]

The Upper Yellow River is the most important area for water retention and flow production in the Yellow River basin, and the statuses of the ecosystems in this region are related to the ecological stability of the whole Yellow River basin. In this paper, the fractional vegetation cover (FVC), net primary productivity (NPP) of vegetation and water retention, soil retention, and windbreak and sand fixation services of the Upper Yellow River ecosystems were analysed from 2000 to 2019 with the trend analysis method. Ecological restoration degree evaluation indices were constructed to comprehensively assess the ecological restoration situation and restoration potential of the ecosystems in the Upper Yellow River region over the past 20 years and to quantitatively determine the contribution rates of climate factors and human activities to these ecosystem changes. The results showed that the settlement ecosystem area exhibited the greatest increase, while the grassland ecosystem area decreased significantly over the study period. In the Upper Yellow River region, the ecosystem quality and ecosystem services generally remained stable or improved. Areas with moderately, strongly and extremely improved ecological restoration degrees accounted for 32.9%, 21.0% and 2.8% of the entire Upper Yellow River region, respectively. Areas with strongly improved and extremely improved ecological restoration degrees were mainly distributed in the Loess Plateau gully areas and on the eastern Hetao Plain. The contribution rates of climatic factors and human activities to the NPP changes measured in the Upper Yellow River were 81.6% and 18.4%, respectively, while the contribution rates of these processes to soil erosion modulus changes were 77.6% and 22.4%, respectively. The restoration potential index of the FVC in the Upper Yellow River was 22.7%; that of the forest vegetation coverage was 14.4%; and that of the grassland vegetation coverage was 23.0%. Over the past 20 years, the ecosystems in the Upper Yellow River region have improved and recovered significantly. This study can provide scientific support for the next stage of ecological projects in the Upper Yellow River region. [ABSTRACT FROM AUTHOR]

The treatment of oily sludge (OS) can not only effectively solve environmental pollution but also contribute to the efficient use of energy. In this study, the separation effect of OS was analyzed through sodium lignosulfonate (SL)-assisted sodium persulfate (S/D) treatment. The effects of SL concentration, pH, temperature, solid–liquid ratio, revolving speed, and time on SL adsorption solubilization were analyzed. The effects of sodium persulfate dosage, demulsification temperature, and demulsification time on sodium persulfate oxidative demulsification were analyzed. The oil removal efficiency was as high as 91.28%. The results showed that the sediment was uniformly and finely distributed in the S/D-treated OS. The contact angle of the sediment surface was 40°, and the initial apparent viscosity of the OS was 56 Pa·s. First, the saturated hydrocarbons and aromatic hydrocarbons on the sediment surface were adsorbed by the monolayer adsorption on SL. Stubborn, cohesive oil agglomerates were dissociated. Sulfate radical anion (SO4−·) with a high oxidation potential, was formed from sodium persulfate. The oxidation reaction occurred between SO4−· and polycyclic aromatic hydrocarbons. A good three-phase separation effect was attained. The oil recovery reached 89.65%. This provides theoretical support for the efficient clean separation of oily sludge. [ABSTRACT FROM AUTHOR]

As an important vegetation parameter and ecological index, vegetation net primary productivity (NPP) can intuitively reflect changes in the ecological environment and the level of the carbon budget. However, the change trend of NPP and its recovery potential in China over the past 20 years remain unclear. Here, we used trend analysis, multiple regression analysis and residual analysis methods to analyse the change trend in the NPP of China's terrestrial ecosystems from 2000 to 2019, as well as the climax background, restoration status and restoration potential of the NPP of forest, grassland and desert ecosystems. The results showed that (1) the change in vegetation NPP in China from 2000 to 2019 showed a continuous upward trend, with a change slope of 2.39 gC/m2/a2, and the area with a positive slope of change accounted for 68.10% of the country's land area. The contribution rates of meteorological conditions and human activities to vegetation NPP changes were 85.41% and 14.59%, respectively. (2) The results obtained by the regression analysis method of meteorological conditions based on nature reserves could reflect the zonal climax vegetation status to a large extent, and the obtained values had a smooth transition within each ecogeographical division and between each ecogeographical division, which truly reflected the law of gradual change in climate, vegetation and natural conditions. The annual total NPP of the climax background vegetation in China's forest, grassland and desert ecosystems was approximately 2.76 ± 0.28 PgC, and the annual total NPP of the three ecosystems was 1.90 ± 0.2 PgC, 0.80 ± 0.07 PgC and 0.009 ± 0.0005 PgC, respectively. (3) The annual total vegetation NPP of the restoration status of China's forest, grassland and desert ecosystems was 2.24 PgC, and the annual total vegetation NPP of the three was 1.54 PgC, 0.65 PgC and 0.007 PgC, respectively. Benefiting from the effective implementation of climate warming and humidification and ecological engineering, the agro-pastoral zone, the Loess Plateau, the eastern Sichuan Basin and the Greater Khingan Range had the most significant increases in the past 20 years. (4) The annual total vegetation NPP of China's forest, grassland and desert ecosystem restoration potential was approximately 0.52 ± 0.28 PgC, which accounted for approximately 19.05% of the annual total NPP of the climax background vegetation. The annual total vegetation NPP of forest, grassland and desert ecosystems restoration status was 0.36 ± 0.2 PgC, 0.16 ± 0.07 PgC and 0.002 ± 0.0005 PgC, respectively; the restoration potential accounted for 18.80%, 9.67% and 23.95% of the climax background vegetation NPP, respectively. The deployment of ecological projects should fully consider the restrictive climate conditions for decision makers and ecological scholars, and the benefits and costs of the projects should be considered comprehensively. [ABSTRACT FROM AUTHOR]

Otolith growth and microstructural features of fish are essential to the understanding of the early fish lifecycle. This paper assesses the features of otoliths from laboratory-reared larval and juvenile Sinogastromyzon wui (S. wui, 0 to 25 days post-hatching) that were obtained as eggs from the Shilong Reach of Xijiang River between April and August 2021. We observed the development of the three pairs of otoliths (lapilli, sagittae, and asterisci) and compared the shape changes and growth of the lapilli and sagittae, as well as the timing and deposition rate of increments of the lapilli. The lapilli and the sagittae were visible on hatching, whereas the asterisci were present at four days post-hatching (dph). The shape of the sagitta changed more obviously than that of the lapillus, and a strong correlation was observed between sagitta shape changes and fish ontogenesis. The otolith shape greatly modulated during the post-flexion larval stage (Post-FLS), it corresponded with the formation period of individual fins. Analysis of the microstructural features indicated that lapilli were the optimal otolith for age determination and increment deposition rate confirmation. Using regression analysis of the known age and the number of lapillus daily increments, we demonstrated that the lapillus developmental increments were deposited daily, and the first increment formed at two days post-hatching. Our conclusions support employing the lapillus increment deposition rate and the time of the first daily increments in the determination of the age of wild larval and juvenile S. wui. [ABSTRACT FROM AUTHOR]

Oxidative stress plays an important role in the pathogenesis of myocardial infarction (MI). Schisandra chinensis bee pollen extract (SCBPE) possesses powerful antioxidant capacity. This study aimed to further explore the antioxidative and cardioprotective effects of SCBPE on acute MI induced by isoprenaline (ISO) in rats. The rats were intragastrically administrated with SCBPE (600, 1200, or 1800 mg/kg/day) and Compound Danshen dropping pills (270 mg/kg/day) for 30 days, then subcutaneously injected with ISO (65 mg/kg/day) on the 29th and 30th day. Compared with the model group, pretreatment with middle and high doses of SCBPE significantly reduced serum aspartate transaminase, lactate dehydrogenase, and creatine kinase activities and increased myocardial superoxide dismutase, glutathione peroxidase, and catalase activities. The histopathologic aspects showed that pathological heart change was found in the model group and reduced to varying degrees in the SCBPE groups. Moreover, the protein expression of nuclear factor-erythroid 2-related factor 2 (Nrf-2), heme oxygenase-1 (HO-1), and Bcl2 in the heart increased in the SCBPE groups, while that of Bax decreased compared to the model group. Besides this, uridine was isolated from S. chinensis bee pollen for the first time. This study could provide a scientific basis for using Schisandra chinensis bee pollen as a functional food for the prevention of MI. [ABSTRACT FROM AUTHOR]

Silicon/carbon nanotube (Si/CNTs) nanocomposite is a promising anode material for lithium ion batteries (LIBs). Challenges related to the tricky synthesis process, as well as the weak interaction between Si and CNTs, hinder practical applications. To address these issues, a facile, one-step method to synthesize Si/CNTs nanocomposite by using silica (SiO2) as a reactant via a magnesium reduction process was developed. In this synthesis, the heat released enables the as-obtained Si to react with CNTs in the interfacial region to form silicon carbide (SiC). By virtue of the unique structure composed of Si nanoparticles strongly anchored to conductive CNTs network with stable Si–C chemical bonding, the Si/SiC/CNT nanocomposite delivers a stable capacity of ~1100 mAh g−1 and a capacity retention of about 83.8% after 200 cycles at a current density of 100 mA g−1. Our studies may provide a convenient strategy for the preparation of the Si/C anode of LIBs. [ABSTRACT FROM AUTHOR]