Search

In this study, anisotropic graphene/graphene oxide (GO) aerogels (AGAs) were obtained by freeze-drying after direct participation of pristine graphene in the self-assembly of anisotropic gel by the heat flow method. After vacuum microwave treatment, the physical, chemical and structural characteristics of the AGAs were investigated. The results show that AGAs, in which the internal graphene sheets are parallel to the heat flow direction, are successfully prepared. After microwave treatment, the amount of oxygen and nitrogen reduces significantly and the sp2 domain increases. However, at the same time, many fragments and holes are generated in the graphene sheets. The effects of AGAs on the phase transition of paraffin is studied, and the results show that the melting enthalpy, solidification enthalpy and initial melting temperature of AGA/paraffin composites decreases as the GO content in the AGAs increases, whereas the melting range, solidifying range and subcooling degree increases. The highest axial thermal conductivity of the AGA/paraffin composite is 1.45 W/(mK), and the thermal conductivity enhancement efficiency is 884% (AGA content was 0.53 vol %). Compared with previously investigated, similar AGA/paraffin composites, the aerogels fabricated in this study have the obvious advantages of a simple fabrication process, a low cost and a high thermal conductivity enhancement efficiency. These aerogels possess the potential for application in phase-change energy storage (PES), thermal energy management and other fields. [ABSTRACT FROM AUTHOR]

In this study, we investigated the directional heating of graphene oxide (GO) dispersion to generate a temperature gradient and form a simulated "ocean current" inside the dispersion so that GO sheets could be aligned in a directional manner and then reduced and self-assembled into anisotropic reduced graphene oxide (rGO) gel. After freeze-drying and varying degrees of vacuum microwave treatment, anisotropic chemically derived graphene aerogels (AGAs) were obtained. Through performance detection and the analysis of the results, it was verified that the AGAs with certain characteristics of "ocean current" were prepared in this experiment, and its axial direction has obvious directional arrangement. After being treated by vacuum microwave for a short time (1 min.), the axial thermal conductivity of the composite materials (AGA-adsorbed paraffin) was observed to be 1.074 W/mK, and the thermal conductivity enhancement efficiency was 995%; as compared with similar thermal conductivity enhancement composites that were found in previous studies, the proposed method in this paper has the advantages of simple processing, high efficiency, and energy conservation. [ABSTRACT FROM AUTHOR]

Cimabanshuo deposit is a newly discovered porphyry copper (Cu) deposit with giant metallogenic potential, found in the western segment of the Gangdese metallogenic belt, Tibet. The average elevation of the deposit is greater than 5500 m and the terrain on which it is found is steep and complex. Therefore, it is untraversed, and the existing exploration works on it are weak. We used 59 AMT sites belonging to an array covering the main, proven mineralization zone and ore bodies of this deposit for an analysis of its underground electrical structure. Dimensionality and strike analysis revealed the apparent three-dimensional (3D) features near the Cu ore bodies. 3D inversion with topography was conducted for the AMT array data. A large range of high-resistivity anomaly (~500–2000 Ωm) appears beneath the proven Cu mineralization zone and ore bodies, which is interpreted as intrusive rocks with potassic alteration. Although containing chalcopyrite, it is characterized by middle–high resistivity due to a low sulfide content and poor connectivity. Moreover, a series of scattered conductors (~10–300 Ωm) around the Cu ore bodies are distributed in the shallow layer from near the surface to ~200 m, possibly indicating phyllic alteration containing pyritization and connected metal sulfides. The proven ore bodies of Cimabanshuo are mainly located at the junction regions between high-resistivity intrusive rocks and high-conductivity sericitization alteration zones. According to this research, the 3D inversion with topography of AMT data can visually display the 3D distribution of intrusive rocks and alteration zones beneath porphyry Cu deposits in high-elevation regions, and provides a reference for further exploration works. [ABSTRACT FROM AUTHOR]

Azobenzene (AB) units were successfully introduced into poly(1,6-heptadiyne)s in order to ensure smooth synthesis of double- and single-stranded poly(1,6-heptadiyne)s (P1 and P2) and simultaneously realize the self-assembly by Grubbs-III catalyst-mediated metathesis cyclopolymerization (CP) of AB-functionalized bis(1,6-heptadiyne) and 1,6-heptadiyne monomers (M1 and M2). Monomers and polymers were characterized by 1H NMR, mass spectroscopy, and GPC techniques. The double-stranded poly(1,6-heptadiyne)s exhibited a large scale of ordered ladder nanostructure. This result was attributed to the π−π attractions between end groups along the longitudinal axis of the polymers and van der Waals interactions between the neighboring polymeric backbones. While the Azo chromophore connected in the side chain of P2 induced conformation of micelles nanostructure during the CP process without any post-treatment. Furthermore, the photoisomerization of Azo units had an obviously different regulatory effect on the conjugated degree of the polymer backbone, especially for the single-stranded P2, which was attributed to the structural differences and the interaction between AB chromophores in the polymers. [ABSTRACT FROM AUTHOR]

Phased energy storage technologies are highly advantageous and feasible for storing and utilizing clean renewable energy resources, for instance, solar energy and waste heat, and it is an effective method to improve energy efficiency and save energy. However, phase change energy storage has some problems, for example, low thermal conductivity and phase change leakage, which lead to limited application. In this paper, anisotropic graphene aerogels were prepared by ice crystal template method with high thermal conductivity of graphene, and silver was attached to the pore wall graphene sheets and the graphene sheet boundaries of the aerogels. The results show that anisotropic graphene aerogels were successfully prepared, and SEM and EDS indicate that up to 9.14 at % silver was successfully attached to the graphene sheets and boundaries. The anisotropic thermal conductivity of the PArGO phase change composites after adsorption of the paraffin is significant, with a maximum axial thermal conductivity of PArGO of 1.20 W/(mK) and radial thermal conductivity of 0.54 W/(mK), compared to the pure paraffin (0.26 W/(mK)) increased by 362% and 108%, respectively. The enthalpy of the composite has been reduced to 149.6 J/g due to the silver particles attached, but the thermal properties have been greatly improved. In experiments simulating real temperature changes, PArGO achieves phase transitions very fast, with a 74% improvement on thermal efficiency of storage and discharge over the pure paraffin. [ABSTRACT FROM AUTHOR]