Search

Bistatic and multistatic SAR technology, with its multi-dimensional, ultra-wide swath, and high-resolution advantages, is widely used in earth observation, military reconnaissance, deep space exploration, and other fields. The LuTan-1 (LT-1) mission employs two full-polarimetric L-band SAR satellites for the BiSAR system. The bistatic mode introduces phase errors in echo reception paths due to different transmission links, making echo compensation a key factor in ensuring BiSAR performance. This paper proposes a novel bistatic internal calibration strategy that combines ground temperature compensation, in-orbit internal calibration, and pulsed alternate synchronization to achieve echo compensation. Prior to launch, temperature compensation data for the internal calibration system are obtained via temperature experiments. During in-orbit operation, calibration data are acquired by executing the internal calibration pulse sequence and noninterrupted pulsed alternate synchronization. In ground processing, echo compensation is completed based on the above two parts of calibration data. A comprehensive analysis of the entire calibration chain reveals a temperature compensation accuracy of 0.10 dB/1.38°. Additionally, a ground verification system is established to conduct BiSAR experiments, achieving a phase synchronization accuracy of 0.16°. Furthermore, the in-orbit test obtained DSM products with an average error of 1.3 m. This strategy provides a valuable reference for future spaceborne bistatic and multistatic SAR systems. [ABSTRACT FROM AUTHOR]

Phase synchronization is one of the key technical challenges and prerequisites for the bistatic synthetic aperture radar (SAR) system, which can form a single-pass interferometry system to perform topographic mapping. In this paper, an advanced phase synchronization scheme based on a pulsed signal at carrier frequency is proposed for a bistatic SAR system and it is verified by a ground validation system. In the proposed phase synchronization scheme, the pulsed signal at carrier frequency is used for phase synchronization link, and it is exchanged by virtue of a time slot between radar signals. The feasibility of the scheme is proven by theoretical analysis of various factors affecting the performance of phase synchronization, and the reliability of the scheme is verified by the test results of the ground validation system. [ABSTRACT FROM AUTHOR]

The deviation between the two oscillators in BiSAR systems will cause a residual modulation of echo signal. Therefore, the phase synchronization is an important issue that must be addressed for BiSAR systems. An advanced non-interrupted phase synchronization scheme is used for the LuTan-1 SAR satellite. The synchronization transceiver (STR) is designed for transmitting and receiving synchronization signals. In addition, STR mainly consists of master and auxiliary transceivers and switch module. Furthermore, the function and working principle of STR are introduced, and the detailed design of each part is described. The measured results are also evaluated to prove the performance of the STR. In addition, the phase synchronization accuracy is also demonstrated to verify the effectiveness of the non-interrupted synchronization scheme. The standard deviation (STD) of the residual phase is less than 0.3 degrees. The results have guiding significance for the synchronization unit design of LuTan-1 and the future BiSAR system. [ABSTRACT FROM AUTHOR]