Search

Guanyl-urea phosphate (GUP) was introduced into furfurylated wood in order to improve fire retardancy. Modified wood was produced via vacuum-pressure impregnation of the GUP–furfuryl alcohol (FA) aqueous solution, which was then polymerized at elevated temperature. The water leaching resistance of the treated wood was tested according to European standard EN 84, while the leached water was analyzed using ultra-performance liquid chromatography (UPLC) and inductively coupled plasma–sector field mass spectrometry (ICP-SFMS). This new type of furfurylated wood was further characterized in the laboratory by evaluating its morphology and elemental composition using optical microscopy and electron microscopy coupled with energy-dispersive X-ray spectrometry (SEM-EDX). The chemical functionality was detected using infrared spectroscopy (FTIR), and the fire resistance was tested using cone calorimetry. The dimensional stability was evaluated in wet–dry soaking cycle tests, along with the mechanical properties, such as the Brinell hardness and bending strength. The fire retardancy of the modified furfurylated wood indicated that the flammability of wood can be depressed to some extent by introducing GUP. This was reflected in an observed reduction in heat release rate (HRR2) from 454.8 to 264.9 kW/m2, without a reduction in the material properties. In addition, this leaching-resistant furfurylated wood exhibited higher fire retardancy compared to conventional furfurylated wood. A potential method for producing fire-retardant treated furfurylated wood stable to water exposure has been suggested. [ABSTRACT FROM AUTHOR]

In this study, the wood–water interactions in Scots pine sapwood modified with maleic anhydride (MA) and sodium hypophosphite (SHP) was studied in the water-saturated state. The water in wood was studied with low field nuclear magnetic resonance (LFNMR) and the hydrophilicity of cell walls was studied by infrared spectroscopy after deuteration using liquid D2O. The results of LFNMR showed that the spin–spin relaxation (T2) time of cell wall water decreased by modification, while T2 of capillary water increased. Furthermore, the moisture content and the amount of water in cell walls of modified wood were lower than for unmodified samples at the water-saturated state. Although the amount of accessible hydroxyl groups in modified wood did not show any significant difference compared with unmodified wood, the increase in T2 of capillary water indicates a decreased affinity of the wood cell wall to water. However, for the cell wall water, the physical confinement within the cell walls seemed to overrule the weaker wood–water interactions. [ABSTRACT FROM AUTHOR]

Simple Summary: This study proposed a methodology to simulate ecological damage in a toluene spill situation by coupling AQUATOX, an established ecological assessment model, and EFDC, a Lagrangian fluid diffusion model. TheAQUATOX-EFDC simulation showed a significant ecological impact, especially the greatest damage on the fish species group, the top predators. In this study, an ecological impact was assessed for the short-term leak scenario through the AQUATOX-EFDC model, which combines the proven ecological model AQUATOX with the hydrodynamic model EFDC. A case study of the coupled AQUATOX-EFDC model was conducted for 30–30,000 kg toluene leak scenarios in the Jeonju River in South Korea. A 21-day scenario simulation was conducted, and the impact of the toluene spill accident was evaluated by comparing the biomass between the control simulation and the perturbed simulation. As a result of the simulation, it was found that in the scenario in which 3000 kg of toluene was leaked for a day, a substantial change was expected in the range of 0–640 m from the accident site. Additionally, for a 30,000 kg leak, a substantial change was expected in the range of 0–2300 m from the accident site, and the greatest damage was observed for the fish species group, the top predators. As a result, the AQUATOX-EFDC simulation showed a significant ecological impact, and the proposed model will be helpful to understand the ecological impact and establish the management strategy for the ecological risk of the chemical spill. [ABSTRACT FROM AUTHOR]

A large quantity of volatile organic compounds (VOCs) can be released into water environments from oil spills and chemical exposure accidents. A recently developed solid ceramic dosimeter (SCD) could be used for long-term measuring of low VOCs concentrations in water. However, calibration and field testing of these SCDs have thus been far insufficient to apply for VOCs monitoring in a water environment in a chemical industrial area. We conducted laboratory calibration experiments and stability tests of the SCD. The mass accumulation of 14 target VOCs from 2 to 100 μg/L was increased linearly with time in the sampler. The absorption rate of the VOCs was related to Henry's law constant. The average diffusion coefficient of the 14 VOCs in the SCD wall was 1.02 × 10−9 m2/s. The SCD was utilized in a petrochemical plant complex in South Korea with an industrial wastewater reservoir. After a total of 7 days of deployment, chloroform, ethylbenzene, and toluene were detected by both passive sampling and grab sampling at the same VOC concentrations. [ABSTRACT FROM AUTHOR]