Search

Bacterial infections are a common mode of failure for medical implants. This study aims to develop antibacterial polyelectrolyte multilayer (PEM) coatings that contain a plant-derived condensed tannin polymer (Tanfloc, TAN) with inherent antimicrobial activity. Tanfloc is amphoteric, and herein we show that it can be used as either a polyanion or a polycation in PEMs, thereby expanding the possibility of its use in PEM coatings. PEMs are ordinarily formed using a polycation and a polyanion, in which the functional (ionic) groups of the two polymers are complexed to each other. However, using the amphoteric polymer Tanfloc with weakly basic amine and weakly acidic catechol and pyrogallol groups enables PEM formation using only one or the other of its functional groups, leaving the other functional group available to impart antibacterial activity. This work demonstrates Tanfloc-containing PEMs using multiple counter-polyelectrolytes including three polyanionic glycosaminoglycans of varying charge density, and the polycations N,N,N-trimethyl chitosan and polyethyleneimine. The layer-by-layer (LbL) assembly of PEMs was monitored using in situ Fourier-transform surface plasmon resonance (FT-SPR), confirming a stable LbL assembly. X-ray photoelectron spectroscopy (XPS) was used to evaluate surface chemistry, and atomic force microscopy (AFM) was used to determine the surface roughness. The LDH release levels from cells cultured on the Tanfloc-containing PEMs were not statistically different from those on the negative control (p > 0.05), confirming their non-cytotoxicity, while exhibiting remarkable antiadhesive and bactericidal properties against Pseudomonas aeruginosa (P. aeruginosa) and Staphylococcus aureus (S. aureus), respectively. The antibacterial effects were attributed to electrostatic interactions and Tanfloc's polyphenolic nature. This work underscores the potential of Tanfloc as a versatile biomaterial for combating infections on surfaces. [ABSTRACT FROM AUTHOR]

Heart failure is the leading cause of death in the US and worldwide. Despite modern therapy, challenges remain to rescue the damaged organ that contains cells with a very low proliferation rate after birth. Developments in tissue engineering and regeneration offer new tools to investigate the pathology of cardiac diseases and develop therapeutic strategies for heart failure patients. Tissue -engineered cardiac scaffolds should be designed to provide structural, biochemical, mechanical, and/or electrical properties similar to native myocardium tissues. This review primarily focuses on the mechanical behaviors of cardiac scaffolds and their significance in cardiac research. Specifically, we summarize the recent development of synthetic (including hydrogel) scaffolds that have achieved various types of mechanical behavior—nonlinear elasticity, anisotropy, and viscoelasticity—all of which are characteristic of the myocardium and heart valves. For each type of mechanical behavior, we review the current fabrication methods to enable the biomimetic mechanical behavior, the advantages and limitations of the existing scaffolds, and how the mechanical environment affects biological responses and/or treatment outcomes for cardiac diseases. Lastly, we discuss the remaining challenges in this field and suggestions for future directions to improve our understanding of mechanical control over cardiac function and inspire better regenerative therapies for myocardial restoration. [ABSTRACT FROM AUTHOR]

In this work, a new photovoltaic device was prepared. The device uses titanium (Ti) foil/TiO2 nanotubes as the photoanode and multi-walled carbon nanotubes (MWCNTs) as a photosensitizer. Titanium dioxide nanotube arrays (TiO2-NTs) were prepared by one-step anodic oxidation. Cut-MWCNTs with a length of less than 100 nm were obtained by the mixed-acid oxidation of MWCNTs. The two materials were combined to form a TiO2-NTs@cut-MWCNT heterostructure by electrophoresis. TiO2-NTs@cut-MWCNTs were characterized by field-emission scanning electron microscopy (FESEM) and X-ray diffraction (XRD), which showed that the two materials were effectively combined. We fabricated the heterostructure into a photovoltaic device, showing an enhanced photocurrent response and an efficiency of 0.0138%, and explained this phenomenon by performing UV-vis absorption spectroscopy and electrochemical tests. It is hoped that this work can provide a reference value for the application of carbon nanotubes in photovoltaic devices. [ABSTRACT FROM AUTHOR]

Achieving multi-color luminescence with a single atomic center in transition metal complexes is a challenge. In this work, luminescent materials with tunable emission properties were realized by complexation between aluminum (III) ions with the ligands 3-hydroxyflavone (3-HF) and 5,7-dichloro-8-hydroxyquinoline (DCHQ). Aluminum (III) complexes with a single ligand emitted blue from 3-HF and green from DCHQ. High quantum yields (QYs) of 29.42% and 37.00% were also obtained, respectively. DFT calculations revealed details of the photophysical properties of the complexes. Correspondingly, cyan light emission was obtained if these two complexes were mixed together, from which the emission wavelength was located at 470 nm and the QY was 20.52%, under 290 nm excitation. More importantly, the cyan light emitted by the mixtures had selective sensitivity to different metal ions, resulting in either quenching the fluorescence (in the case of Fe3+) or enhancing the fluorescence (in the case of In3+). The fluorescence enhancement effect of In3+ on metal complexes has not been previously reported, neither for transition metal nor lanthanide ions. The linear quenching behavior of Fe3+ functions in the 50–700 μM concentration range, and the linear enhancement behavior of In3+ is demonstrated in the 300–800 mM concentration range. [ABSTRACT FROM AUTHOR]

The clinical use of anticancer drugs necessitates new technologies for their safe, sensitive, and selective detection. In this article, lanthanide (Eu3+ and Tb3+)-loaded γ-cyclodextrin nano-aggregates (ECA and TCA) are reported, which sensitively detects the anticancer drug irinotecan by fluorescence intensity changes. Fluorescent lanthanide (Eu3+ and Tb3+) complexes exhibit high fluorescence intensity, narrow and distinct emission bands, long fluorescence lifetime, and insensitivity to photobleaching. However, these lanthanide (Eu3+ and Tb3+) complexes are essentially hydrophobic, toxic, and non-biocompatible. Lanthanide (Eu3+ and Tb3+) complexes were loaded into naturally hydrophilic γ-cyclodextrin to form fluorescent nano-aggregates. The biological nontoxicity and cytocompatibility of ECA and TCA fluorescent nanoparticles were demonstrated by cytotoxicity experiments. The ECA and TCA fluorescence nanosensors can detect irinotecan selectively and sensitively through the change of fluorescence intensity, with detection limits of 6.80 μM and 2.89 μM, respectively. ECA can safely detect irinotecan in the cellular environment, while TCA can detect irinotecan intracellularly and is suitable for cell labeling. [ABSTRACT FROM AUTHOR]

In this work, titania (TiO2) nanoparticles modified by Eu(TTA)3Phen complexes (ETP) were prepared by a simple solvothermal method developing a fluorescence Mn7+ pollutant sensing system. The characterization results indicate that the ETP cause structural deformation and redshifts of the UV-visible light absorptions of host TiO2 nanoparticles. The ETP also reduce the crystallinity and crystallite size of TiO2 nanoparticles. Compared with TiO2 nanoparticles modified with Eu3+ (TiO2-Eu3+), TiO2 nanoparticles modified with ETP (TiO2-ETP) exhibit significantly stronger photoluminescence under the excitation of 394 nm. Under UV excitation, TiO2-ETP nanoparticles showed blue and red emission corresponding to TiO2 and Eu3+. In addition, as the concentration of ETP in TiO2 nanoparticles increases, the PL intensity at 612 nm also increases. When ETP-modified TiO2 nanoparticles are added to an aqueous solution containing Mn7+, the fluorescence intensity of both TiO2 and ETP decreases. The evolution of the fluorescence intensity ratio (I1/I2) of TiO2 and ETP is linearly related to the concentration of Mn7+. The sensitivity of fluorescence intensity to Mn7+ concentration enables the design of dual fluorescence ratio solid particle sensors. The method proposed here is simple, accurate, efficient, and not affected by the environmental conditions. [ABSTRACT FROM AUTHOR]

Polysaccharide-based materials created by physical processes have received considerable attention for biomedical applications. These structures are often made by associating charged polyelectrolytes in aqueous solutions, avoiding toxic chemistries (crosslinking agents). We review the principal polysaccharides (glycosaminoglycans, marine polysaccharides, and derivatives) containing ionizable groups in their structures and cellulose (neutral polysaccharide). Physical materials with high stability in aqueous media can be developed depending on the selected strategy. We review strategies, including coacervation, ionotropic gelation, electrospinning, layer-by-layer coating, gelation of polymer blends, solvent evaporation, and freezing–thawing methods, that create polysaccharide-based assemblies via in situ (one-step) methods for biomedical applications. We focus on materials used for growth factor (GFs) delivery, scaffolds, antimicrobial coatings, and wound dressings. [ABSTRACT FROM AUTHOR]

Background: The ever-growing number of infections caused by multidrug-resistant (MDR) bacterial strains requires an increased effort to develop new antibiotics. Herein, we demonstrate that a new class of gold nanoparticles (Au NPs), defined by shape and conjugated with ceragenin CSA-131 (cationic steroid antimicrobial), display strong bactericidal activity against intractable superbugs. Methods: For the purpose of research, we developed nanosystems with rod- (AuR NPs@CSA-131), peanut-(AuP NPs@CSA-131) and star-shaped (AuS NPs@CSA-131) metal cores. Those nanosystems were evaluated against bacterial strains representing various groups of MDR (multidrug-resistant) Gram-positive (MRSA, MRSE, and MLSb) and Gram-negative (ESBL, AmpC, and CR) pathogens. Assessment of MICs (minimum inhibitory concentrations)/MBCs (minimum bactericidal concentrations) and killing assays were performed as a measure of their antibacterial activity. In addition to a comprehensive analysis of bacterial responses involving the generation of ROS (reactive oxygen species), plasma membrane permeabilization and depolarization, as well as the release of protein content, were performed to investigate the molecular mechanisms of action of the nanosystems. Finally, their hemocompatibility was assessed by a hemolysis assay. Results: All of the tested nanosystems exerted potent bactericidal activity in a manner resulting in the generation of ROS, followed by damage of the bacterial membranes and the leakage of intracellular content. Notably, the killing action occurred with all of the bacterial strains evaluated, including those known to be drug resistant, and at concentrations that did not impact the growth of host cells. Conclusions: Conjugation of CSA-131 with Au NPs by covalent bond between the COOH group from MHDA and NH3 from CSA-131 potentiates the antimicrobial activity of this ceragenin if compared to its action alone. Results validate the development of AuR NPs@CSA-131, AuP NPs@CSA-131, and AuS NPs@CSA-131 as potential novel nanoantibiotics that might effectively eradicate MDR bacteria. [ABSTRACT FROM AUTHOR]

In this study, transparent membranes containing luminescent Tb3+ and Eu3+ complex-doped silica nanoparticles were prepared via electrospinning. We prepared the electrospun fibrous membranes containing Tb(acac)3phen- (acac = acetylacetone, phen = 1,10-phenanthroline) and/or Eu(tta)3phen- (tta = 2-thenoyltrifluoroacetone) doped silica (M-Si-Tb3+ and M-Si-Eu3+) and studied their photoluminescence properties. The fibrous membranes containing the rare earth complexes were prepared by electrospinning. The surface morphology and thermal properties of the fibrous membrane were studied by atomic force microscopy (AFM), thermogravimetric analysis (TGA) and differential scanning calorimetry (DSC), respectively. Fluorescence spectroscopy was used to characterize the fluorescence properties of the membranes. During the electrospinning process, the PVDF transitions from the α phase to the β phase, which exhibits a more rigid structure. The introduction of rigid materials, like PVDF and silica, can improve the fluorescence properties of the hybrid materials by reducing the rate of nonradiative decay. So the emission spectra at 548 nm (Tb) and 612 nm (Eu) were enhanced, as compared to the emission from the pure complex. Furthermore, the fluorescence lifetimes ranged from 0.6 to 1.5 ms and the quantum yields ranged from 32% to 61%. The luminescent fibrous membranes have potential applications in the fields of display panels, innovative electronic and optoelectronic devices. [ABSTRACT FROM AUTHOR]

Three types of graphene oxide/silver nanoparticles (GO/AgNPs) composite membranes were prepared to investigate size-effect of AgNPs on nanofiltration ability. The size of AgNPs was 8, 20, and 33 nm, which was characterized by UV-visible spectroscopy and transmission electron microscopy. The morphology and structure of GO and GO/AgNPs composite membranes were characterized by atomic force microscopy, scanning electron microscopy, and X-ray diffraction. The filtration performance of membranes were evaluated on a dead-end filtration device. When the size of AgNPs is 20 nm, the GO/AgNPs composite membrane has the highest water flux (106.1 L m−2 h−1 bar−1) and rejection of Rhodamine B (RhB) (97.73%) among three types of composite membranes. The effect of feed concentration of dye solution and the flux of common solvent was also investigated. The mechanism was discussed, which demonstrated that both interlaying spacing and defect size influence the filtration ability of membrane, which is instructive to future study. [ABSTRACT FROM AUTHOR]

A novel anhydrous preparation of silica (SiO2)-encapsulated terbium (Tb3+) complex nanoparticles has been investigated. The SiO2-Tb3+ nanoparticles are incorporated in electrospun polyvinylpyrrolidone hybrid nanofibers. Transmission electron microscopy confirms that Tb3+ complexes are uniformly and stably encapsulated in or carried by nanosilica. The influence of pH on the fluorescence of Tb3+ complexes is discussed. The properties, composition, structure, and luminescence of the resulting SiO2–Tb3+ hybrid nanoparticles are investigated in detail. There is an increase in the fluorescence lifetime of SiO2–Tb3+ nanoparticles and SiO2–Tb3+/polyvinylpyrrolidone (PVP) hybrid nanofibers compared with the pure Tb3+ complexes. Due to the enhanced optical properties, the fluorescent hybrid nanofibers have potential applications as photonic and photoluminescent materials. [ABSTRACT FROM AUTHOR]

In this work, graphene oxide (GO)/ethylene glycol (EG) membranes were designed by a vacuum filtration method for molecular separation and water purification. The composite membranes were characterized by scanning electron microscopy (SEM), field emission scanning electron microscopy (FESEM), Fourier transform infrared spectroscopy (FTIR), thermogravimetric analysis (TGA), atomic force microscopy (AFM) and X-ray photoelectron spectroscopy (XPS). The interlayer spacing of GO membranes (0.825 nm) and GO/EG membranes (0.634 nm) are measured by X-ray diffraction (XRD). Using the vacuum filtration method, the membrane thickness can be controlled by selecting the volume of the solution from which the membrane is prepared, to achieve high water permeance and high rejection of Rhodamine B (RhB). The membrane performance was evaluated on a dead-end filtration device. The water permeance and rejection of RhB of the membranes are 103.35 L m−2 h−1 bar−1 and 94.56% (GO), 58.17 L m−2 h−1 bar−1 and 97.13% (GO/EG), respectively. The permeability of GO/EG membrane is about 40 × 10−6 L m-1 h−1 bar−1. Compared with the GO membrane, the GO/EG membrane has better separation performance because of its proper interlayer spacing. In this study, the highest rejection of RhB (99.92%) is achieved. The GO/EG membranes have potential applications in the fields of molecular separation and water purification. [ABSTRACT FROM AUTHOR]