Search

In recent years, the permanent magnet synchronous motor (PMSM) has garnered significant attention due to its high power density and efficiency in applications such as electric vehicles, aviation, and other domains. This paper proposes a stator field control permanent magnet synchronous starter–generator (SFC-PMSSG) system. The starter–generator system comprises the SFC-PMSSG and a field controller (FC). A mathematical model of the SFC-PMSSG is established. Finite element analysis (FEA) is employed to obtain the electromagnetic parameters of the SFC-PMSSG, and the characteristics of the SFC-PMSSG are analyzed. A circuit simulation model of the FC is established to assess the control effect and the loss of the FC. A co-analysis of the system is conducted, and the results demonstrate that the SFC-PMSSG system can maintain output voltage stability as load and speed conditions vary. [ABSTRACT FROM AUTHOR]

Aiming to design a generator with high reliability, high efficiency, and especially a constant output voltage over a wide speed range for hybrid electric vehicles (HEVs), this paper proposes a novel topology of a hybrid excitation doubly salient generator with separate windings (HEDSGSW). The topology herein utilizes a hybrid excitation type of PMs and DC windings to generate parallel magnetic circuits. In addition, PMs are embedded in the magnetic bridge to insulate the excitation windings with armature windings. This design can achieve compactness, efficiency, and especially constant output capability over a wide speed range. The geometry and flux regulation principles, including magnetic flux circuits, are elaborated. After comparing three power generation modes, the most suitable mode, namely, the doubly salient generation 2 (DSG2) mode, is confirmed to ensure a stable voltage output performance. Then, considering the non-uniformity effect of the stator and rotor slots, the no-load back electromotive force (EMF) expressions are derived based on the EMF to air-gap relative permeance method. Furthermore, a 1 kW HEDSGSW FEA model, with an output voltage of 42 V and a rated speed of 6000 rpm, is built to demonstrate the effectiveness of the proposed method. Finally, the operating properties of the HEDSGSW, such as no-load characteristics and adjustment characteristics, are analyzed to further verify the rationality of its magnetic flux circuit and the flexibility of the excitation regulation capability. [ABSTRACT FROM AUTHOR]

The stator coreless axial flux permanent magnet (AFPM) motor with a compact structure, low torque ripple, and high efficiency is particularly suitable as a motor for electric propulsion systems. However, it still requires great effort to design an AFPM motor with higher torque density and lower torque ripple. In this paper, a stator coreless multidisc AFPM (SCM-AFPM) motor with a three-rotor and two-stator topology is proposed. To reduce rotor mass and increase torque density, the proposed SCM-AFPM motor adopts the hybrid permanent magnets (PMs) array with Halbach PMs in the two-terminal rotor and the conventional PMs array in the middle rotor. In addition, a multi-objective optimization model combining response surface method (RSM) and genetic algorithm (GA) is proposed and applied to the proposed SCM-AFPM motor. With the help of the three-dimensional finite-element analysis (3-D FEA), it is found that the torque ripple of the optimized SCM-AFPM motor is 4.73%, while it is 6.21% for the initial motor. Its torque ripple is reduced by 23.8%. Therefore, the proposed multi-objective optimization design method can quickly and reliably obtain the optimal design of the SCM-AFPM motor. [ABSTRACT FROM AUTHOR]

The reverse-salient permanent magnet synchronous motor (RSPMSM) is a competitive candidate for electric vehicles due to its high torque density and high efficiency. This paper proposes an optimized RSPMSM by adopting a segmented permanent magnet structure. First, the structure, electromagnetic torque, and current control laws of the RSPMSM are introduced in detail. Second, the optimization design method of the RSPMSM is proposed by taking the torque and constant-power speed range as optimized objectives, with the saliency ratio as a constraint. The optimized model of the RSPMSM is determined using the genetic algorithm (GA). Further performance analysis and comparisons are made between the initial motor and the optimized motor. Finally, a prototype is manufactured, and the performance of the RSPMSM is verified through the finite element method (FEM) and experiments. [ABSTRACT FROM AUTHOR]

The maglev linear motor has three degrees of motion freedom, which are respectively realized by the thrust force in the x-axis, the levitation force in the z-axis and the torque around the y-axis. Both the thrust force and levitation force can be seen as the sum of the forces on the three windings. The resultant thrust force and resultant levitation force are independently controlled by d-axis current and q-axis current respectively. Thus, the commonly used dq transformation control strategy is suitable for realizing the control of the resultant force, either thrust force and levitation force. However, the forces on the three windings also generate additional torque because they do not pass the mover mass center. To realize the maglev system high-precision control, a maglev linear motor with a new structure is proposed in this paper to decrease this torque. First, the electromagnetic model of the motor can be deduced through the Lorenz force formula. Second, the analytic method and finite element method are used to explore the reason of this additional torque and what factors affect its change trend. Furthermore, a maglev linear motor with a new structure is proposed, with two sets of 90 degrees shifted winding designed on the mover. Under such a structure, the mover position dependent periodic part of the additional torque can be offset. Finally, the theoretical analysis is validated by the simulation result that the additionally generated rotating torque can be offset with little fluctuation in the proposed new-structure maglev linear motor. Moreover, the control system is built in MATLAB/Simulink, which shows that it has small thrust ripple and high-precision performance. [ABSTRACT FROM AUTHOR]

In order to study the multiple restricted factors and parameters of the eddy current loss of generator end structures, both the multi-layer perceptron (MLP) and support vector regression (SVR) are used to study and predict the mechanism of the synergistic effect of metal shield conductivity, relative permeability of clamping plates and structural characteristics of eddy current losses. Based on the eddy current losses of generator end structures under different metal shielding thicknesses and electromagnetic properties, the calculation accuracy of the MLP and SVR is compared. The prediction method gives an effective means for the complex design of the end region of the generator, which reduces the effort of the designers. It also promotes the design efficiency of the electrical generator. [ABSTRACT FROM AUTHOR]

A permanent magnet synchronous motor (PMSM) based on the principle of variable exciting magnetic reluctance (VMRPMSM) is presented. The motor is equipped with symmetrical non-magnetic conductors on both sides of the tangential magnetized permanent magnets (PMs). By placing the non-magnetic conductor (NMC), the magnetic reluctance in the exciting circuit is adjusted, and the flux weakening (FW) of the motor is realized. Hence, the NMC is studied comprehensively. On the basis of introducing the motor structure, the FW principle of this PMSM is described. The shape of the NMC is determined by analyzing and calculating the electromagnetic force (EF) acting on the PMs. We calculate the magnetic reluctance of the NMC and research on the effects of the NMC on electromagnetic force, d-axis and q-axis inductance and FW performance. The critical speeds from the test of the no-load back electromotive force (EMF) verify the correctness of the NMC design. The analysis is corresponding to the test result which lays the foundation of design for this kind of new PMSM. [ABSTRACT FROM AUTHOR]

The multi-degree-of-freedom high-precision positioning system (MHPS) is one of the key technologies in many advanced industrial applications. In this paper, a novel hyperbolic magnetic field voice coil actuator using a rhombus magnet array (HMF-VCA) for MHPS is proposed. Benefiting from the especially designed rhombus magnet array, the proposed HMF-VCA has the advantage of excellent force uniformity, which makes it suitable for multi-degree-of-freedom high-precision positioning applications. First, the basic structure and operation principles of the HMF-VCA are presented. Second, the six-degree-of-freedom force and torque characteristic of the HMF-VCA is studied by three-dimensional finite element analysis (3-D FEA). Third, the influence of structural parameters on force density and force uniformity is investigated, which is conducive to the design and optimization of the HMF-VCA. Finally, a prototype is constructed, and the comparison between the HMF-VCA and conventional VCAs proves the advantage of the proposed topology. [ABSTRACT FROM AUTHOR]