Search

Grape is an economic crop of great importance and is widely cultivated in China. With the development of remote sensing, abundant data sources strongly guarantee that researchers can identify crop types and map their spatial distributions. However, to date, only a few studies have been conducted to identify vineyards using satellite image data. In this study, a vineyard is identified using satellite images, and a new approach is proposed that integrates the continuous wavelet transform (CWT) and a convolutional neural network (CNN). Specifically, the original time series of the normalized difference vegetation index (NDVI), enhanced vegetation index (EVI), and green chlorophyll vegetation index (GCVI) are reconstructed by applying an iterated Savitzky-Golay (S-G) method to form a daily time series for a full year; then, the CWT is applied to three reconstructed time series to generate corresponding scalograms; and finally, CNN technology is used to identify vineyards based on the stacked scalograms. In addition to our approach, a traditional and common approach that uses a random forest (RF) to identify crop types based on multi-temporal images is selected as the control group. The experimental results demonstrated the following: (i) the proposed approach was comprehensively superior to the RF approach; it improved the overall accuracy by 9.87% (up to 89.66%); (ii) the CWT had a stable and effective influence on the reconstructed time series, and the scalograms fully represented the unique time-related frequency pattern of each of the planting conditions; and (iii) the convolution and max pooling processing of the CNN captured the unique and subtle distribution patterns of the scalograms to distinguish vineyards from other crops. Additionally, the proposed approach is considered as able to be applied to other practical scenarios, such as using time series data to identify crop types, map landcover/land use, and is recommended to be tested in future practical applications. [ABSTRACT FROM AUTHOR]

Many methods have been used to generate gridded population maps by downscaling demographic data. As one of these methods, the accuracy of the dasymetric model depends heavily on the covariates. Point-of-interest (POI) data, as important covariates, have been widely used for population estimation. However, POIs are often used indiscriminately in existing studies. A few studies further used selected categories of POIs identified based only on the nonspatial quantitative relationship between the POIs and population. In this paper, the spatial association between the POIs and population distribution was considered to identify the POIs with a strong spatial correlation with the population distribution, i.e., population-sensitive POIs. The ability of population-sensitive POIs to improve the fine-grained population mapping accuracy was explored by comparing the results of random forest dasymetric models driven by population-sensitive POIs, all POIs, and no POIs, along with the same sets of multisource remote sensing and social sensing data. The results showed that the model driven by population-sensitive POI had the highest accuracy. Population-sensitive POIs were also more effective in improving the population mapping accuracy than were POIs selected based only on their quantitative relationship with the population. The model built using population-sensitive POIs also performed better than the two popular gridded population datasets WorldPop and LandScan. The model we proposed in this study can be used to generate accurate spatial population distribution information and contributes to achieving more reliable analyses of population-related social problems. [ABSTRACT FROM AUTHOR]

Urban surface water mapping is essential for studying its role in urban ecosystems and local microclimates. However, fast and accurate extraction of urban water remains a great challenge due to the limitations of conventional water indexes and the presence of shadows. Therefore, we proposed a new urban water mapping technique named the Two-Step Urban Water Index (TSUWI), which combines an Urban Water Index (UWI) and an Urban Shadow Index (USI). These two subindexes were established based on spectral analysis and linear Support Vector Machine (SVM) training of pure pixels from eight training sites across China. The performance of the TSUWI was compared with that of the Normalized Difference Water Index (NDWI), High Resolution Water Index (HRWI) and SVM classifier at twelve test sites. The results showed that this method consistently achieved good performance with a mean Kappa Coefficient (KC) of 0.97 and a mean total error (TE) of 5.82%. Overall, classification accuracy of TSUWI was significantly higher than that of the NDWI, HRWI, and SVM (p-value < 0.01). At most test sites, TSUWI improved accuracy by decreasing the TEs by more than 45% compared to NDWI and HRWI, and by more than 15% compared to SVM. In addition, both UWI and USI were shown to have more stable optimal thresholds that are close to 0 and maintain better performance near their optimum thresholds. Therefore, TSUWI can be used as a simple yet robust method for urban water mapping with high accuracy. [ABSTRACT FROM AUTHOR]

Defoliation and accelerating ripening are important measures for cotton mechanization, and judging the time of defoliation and accelerating the ripening and harvest of cotton relies heavily on the boll opening rate, making it a crucial factor to consider. The traditional methods of cotton opening rate determination are time-consuming, labor-intensive, destructive, and not suitable for a wide range of applications. In this study, the relationship between the change rate of the vegetation index obtained by the unmanned aerial vehicle multi-spectrum and the ground boll opening rate was established to realize rapid non-destructive testing of the boll opening rate. The normalized difference vegetation index (NDVI) and green normalized difference vegetation index (GNDVI) had good prediction ability for the boll opening rate. NDVI in the training set had an R2 of 0.912 and rRMSE of 15.387%, and the validation set performance had an R2 of 0.929 and rRMSE of 13.414%. GNDVI in the training set had an R2 of 0.901 and rRMSE of 16.318%, and the validation set performance had an R2 of 0.909 and rRMSE of 15.225%. The accuracies of the models based on GNDVI and NDVI were within the acceptable range. In terms of predictive models, random forests achieve the highest accuracy in predictions. Accurately predicting the cotton boll opening rate can support decision-making for harvest and harvest aid spray timing, as well as provide technical support for crop growth monitoring and precision agriculture. [ABSTRACT FROM AUTHOR]

Currently, remote sensing crop identification is mostly based on all available images acquired throughout crop growth. However, the available image and data resources in the early growth stage are limited, which makes early crop identification challenging. Different crop types have different phenological characteristics and seasonal rhythm characteristics, and their growth rates are different at different times. Therefore, making full use of crop growth characteristics to augment crop growth difference information at different times is key to early crop identification. In this study, we first calculated the differential features between different periods as new features based on images acquired during the early growth stage. Secondly, multi-temporal difference features of each period were constructed by combination, then a feature optimization method was used to obtain the optimal feature set of all possible combinations in different periods and the early key identification characteristics of different crops, as well as their stage change characteristics, were explored. Finally, the performance of classification and regression tree (Cart), Random Forest (RF), Gradient Boosting Decision Tree (GBDT), and Support Vector Machine (SVM) classifiers in recognizing crops in different periods were analyzed. The results show that: (1) There were key differences between different crops, with rice changing significantly in period F, corn changing significantly in periods E, M, L, and H, and soybean changing significantly in periods E, M, N, and H. (2) For the early identification of rice, the land surface water index (LSWI), simple ratio index (SR), B11, and normalized difference tillage index (NDTI) contributed most, while B11, normalized difference red-edge3 (NDRE3), LSWI, the green vegetation index (VIgreen), red-edge spectral index (RESI), and normalized difference red-edge2 (NDRE2) contributed greatly to corn and soybean identification. (3) Rice could be identified as early as 13 May, with PA and UA as high as 95%. Corn and soybeans were identified as early as 7 July, with PA and UA as high as 97% and 94%, respectively. (4) With the addition of more temporal features, recognition accuracy increased. The GBDT and RF performed best in identifying the three crops in the early stage. This study demonstrates the feasibility of using crop growth difference information for early crop recognition, which can provide a new idea for early crop recognition. [ABSTRACT FROM AUTHOR]

Because canola is a major oilseed crop, accurately determining its planting areas is crucial for ensuring food security and achieving UN 2030 sustainable development goals. However, when canola is extracted using remote-sensing data, winter wheat causes serious interference because it has a similar growth cycle and spectral reflectance characteristics. This interference seriously limits the classification accuracy of canola, especially in mixed planting areas. Here, a novel canola flower index (CFI) is proposed based on the red, green, blue, and near-infrared bands of Sentinel-2 images to improve the accuracy of canola mapping, based on the finding that spectral reflectance of canola on the red and green bands is higher than that of winter wheat during the canola flowering period. To investigate the potential of the CFI for extracting canola, the IsoData, support vector machine (SVM), and random forest (RF) classification methods were used to extract canola based on Sentinel-2 raw images and CFI images. The results show that the average overall accuracy and kappa coefficient based on CFI images were 94.77% and 0.89, respectively, which were 1.05% and 0.02, respectively, higher than those of the Sentinel-2 raw images. Then we found that a threshold of 0.14 on the CFI image could accurately distinguish canola from non-canola vegetation, which provides a solution for automatic mapping of canola. The overall classification accuracy and kappa coefficient of this threshold method were 96.02% and 0.92, which were very similar to those of the SVM and RF methods. Moreover, the advantage of the threshold classification method is that it reduces the dependence on training samples and has good robustness and high classification efficiency. Overall, this study shows that CFI and Sentinel-2 images provide a solution for automatic and accurate canola extraction. [ABSTRACT FROM AUTHOR]

Early crop identification can provide timely and valuable information for agricultural planting management departments to make reasonable and correct decisions. At present, there is still a lack of systematic summary and analysis on how to obtain real-time samples in the early stage, what the optimal feature sets are, and what level of crop identification accuracy can be achieved at different stages. First, this study generated training samples with the help of historical crop maps in 2019 and remote sensing images in 2020. Then, a feature optimization method was used to obtain the optimal features in different stages. Finally, the differences of the four classifiers in identifying crops and the variation characteristics of crop identification accuracy at different stages were analyzed. These experiments were conducted at three sites in Heilongjiang Province to evaluate the reliability of the results. The results showed that the earliest identification time of corn can be obtained in early July (the seven leaves period) with an identification accuracy up to 86%. In the early stages, its accuracy was 40~79%, which was low, and could not reach the satisfied accuracy requirements. In the middle stages, a satisfactory recognition accuracy could be achieved, and its recognition accuracy was 79~100%. The late stage had a higher recognition accuracy, which was 90~100%. The accuracy of soybeans at each stage was similar to that of corn, and the earliest identification time of soybeans could also be obtained in early July (the blooming period) with an identification accuracy up to 87%. Its accuracy in the early growth stage was 35~71%; in the middle stage, it was 69~100%; and in the late stage, it was 92~100%. Unlike corn and soybeans, the earliest identification time of rice could be obtained at the end of April (the flooding period) with an identification accuracy up to 86%. In the early stage, its accuracy was 58~100%; in the middle stage, its accuracy was 93~100%; and in the late stage, its accuracy was 96~100%. In terms of crop identification accuracy in the whole growth stage, GBDT and RF performed better than other classifiers in our three study areas. This study systematically investigated the potential of early crop recognition in Northeast China, and the results are helpful for relevant applications and decision making of crop recognition in different crop growth stages. [ABSTRACT FROM AUTHOR]

The spatial distribution of the population is uneven for various reasons, such as urban-rural differences and geographical conditions differences. As the basic element of the natural structure of the population, the age structure composition of populations also varies considerably across the world. Obtaining accurate and spatiotemporal population age structure maps is crucial for calculating population size at risk, analyzing populations mobility patterns, or calculating health and development indicators. During the past decades, many population maps in the form of administrative units and grids have been produced. However, these population maps are limited by the lack of information on the change of population distribution within a day and the age structure of the population. Urban functional regions (UFRs) are closely related to population mobility patterns, which can provide information about population variation intraday. Focusing on the area within the Beijing Fifth Ring Road, the political and economic center of Beijing, we showed how to use the temporal scaling factors obtained by analyzing the population survey sampling data and population dasymetric maps in different categories of UFRs to realize the intraday variation mapping of elderly individuals and children. The population dasymetric maps were generated on the basis of covariates related to population. In this article, 50 covariates were calculated from remote sensing data and geospatial data. However, not all covariates are associate with population distribution. In order to improve the accuracy of dasymetric maps and reduce the cost of mapping, it is necessary to select the optimal subset for the dasymetric model of elderly and children. The random forest recursive feature elimination (RF-RFE) algorithm was introduced to obtain the optimal subset of different age groups of people and generate the population dasymetric model in this article, as well as to screen out the optimal subset with 38 covariates and 26 covariates for the dasymetric models of the elderly and children, respectively. An accurate UFR identification method combining point of interest (POI) data and OpenStreetMap (OSM) road network data is also introduced in this article. The overall accuracy of the identification results of UFRs was 70.97%, which is quite accurate. The intraday variation maps of population age structure on weekdays and weekends were made within the Beijing Fifth Ring Road. Accuracy evaluation based on sampling data found that the overall accuracy was relatively high— R 2 for each time period was higher than 0.5 and root mean square error (RMSE) was less than 0.05. On weekdays in particular, R 2 for each time period was higher than 0.61 and RMSE was less than 0.02. [ABSTRACT FROM AUTHOR]