Search

Due to their high porosity, large specific surface area, and structural similarity with the extracellular matrix (ECM), electrospun nanofiber membranes are often endowed with the antibacterial properties for biomedical applications. The purpose of this study was to synthesize nano-structured Sc2O3-MgO by doping Sc3+, calcining at 600 °C, and then loading it onto the PCL/PVP substrates with electrospinning technology with the aim of developing new efficient antibacterial nanofiber membranes for tissue engineering. A scanning electron microscope (SEM) and energy dispersive X-ray spectrometer (EDS) were used to study the morphology of all formulations and analyze the types and contents of the elements, and an X-ray diffraction (XRD), thermogravimetric analysis (TGA), and Fourier transform attenuated total reflection infrared spectroscopy (ATR-FTIR) were used for further analysis. The experimental results showed that the PCL/PVP (SMCV-2.0) nanofibers loaded with 2.0 wt% Sc2O3-MgO were smooth and homogeneous with an average diameter of 252.6 nm; the antibacterial test indicated that a low load concentration of 2.0 wt% Sc2O3-MgO in PCL/PVP (SMCV-2.0) showed a 100% antibacterial rate against Escherichia coli (E. coli). [ABSTRACT FROM AUTHOR]

Community forestry is a strategy in which communities are, to some degree, responsible for managing the forests, using a more participatory approach to replace the traditional top-down model. Various forms of policies and governance have been developed to balance goals to ensure the community's socioeconomic resilience and the landscape's biological sustainability. The reinvestment of community forest (CF) income back into forest regeneration is not well documented, and there is a lack of research comparing forest income to the costs associated with forest regeneration. This research examines how changes in timber income and forest-regeneration costs affected CF social and ecological viability. We conducted expert elicitation interviews for CFs (n = 33) under three zones of management in Chitwan, Nepal (Zone 1: buffer zone, Zone 2: forest corridor, and Zone 3: community forest). To examine how CFs differ financially, we asked questions regarding timber income and forest-regeneration expenditures and then posed 22 questions regarding socioeconomic and biological aspects of the CF. Finally, a Kruskal–Wallis rank-sum test was performed to determine whether there were statistically significant differences in perceptions between groups, including zone, timber income (high, medium, low), and forest-regeneration expenditures (high, medium, low). The amount of income from timber had a substantial impact on the communities' biological benefits and financial stability. Lower timber-income areas were thought to be less economically stable, lack the resources to enforce rules and regulations necessary to meet the CF's socioeconomic or biological goals, and place more significant restrictions on the amount of wood members can harvest from the forest. Communities that spent less money on forest regeneration reported poorer levels of forest regeneration, economic sustainability, and community rights. Our research shows that community-forest user groups in the Chitwan district have a significant income and expenditure gap between their forests' biological and socioeconomic advantages and resilience. [ABSTRACT FROM AUTHOR]

The toxicity of Mg(OH)2 nanoparticles (NPs) as antibacterial agents to a normal biological system is unclear, so it is necessary to evaluate their potential toxic effect for safe use. In this work, the administration of these antibacterial agents did not induce pulmonary interstitial fibrosis as no significant effect on the proliferation of HELF cells was observed in vitro. Additionally, Mg(OH)2 NPs caused no inhibition of the proliferation of PC-12 cells, indicating that the brain's nervous system was not affected by Mg(OH)2 NPs. The acute oral toxicity test showed that the Mg(OH)2 NPs at 10,000 mg/kg induced no mortality during the administration period, and there was little toxicity in vital organs according to a histological analysis. In addition, the in vivo acute eye irritation test results showed little acute irritation of the eye caused by Mg(OH)2 NPs. Thus, Mg(OH)2 NPs exhibited great biosafety to a normal biological system, which was critical for human health and environmental protection. [ABSTRACT FROM AUTHOR]

Welding and the behavior of the weldments are important, since welding of high strength low alloy (HSLA) steels is a conventional method for manufacturing industrial parts. This work conducts a comparative investigation of microstructural characteristics and mechanical properties for joints of 16-mm-thick HSLA Q890 steel produced by multi-layer multi-pass shielded metal arc welding (SMAW) with filler wire and single-layer autogenous laser beam welding (LBW). The mechanical properties of the welded joints were assessed in terms of tensile and impact using butt joints. The results show that tensile failure occurred in the base metal during the tensile tests for most of the trials. The ultimate tensile strength and percent elongation of the LBW welded joint (973.5 MPa and 10%) are higher than those of the SMAW joint (951 MPa and 2.9%) due to the filler filling process of the SMAW process. The Charpy impact energy of the weld metal (16.4 J and 15.1 J) is lower than that of the heat-affected zone (18.5 J and 19.5 J) in the LBW joint and the SMAW joint. [ABSTRACT FROM AUTHOR]

The multifunctional polyethylene terephthalate (PET) fabrics were successfully prepared through a dip-coating technology to endow the flame retardant and antibacterial properties of PET fabrics, which are extensively used in many fields. The flame retardant and antibacterial agent was synthesized by a double drop-reverse precipitation method and surface-modified by the mixtures of titanate coupling agents and stearic acid to result in a good compatibility of the hydrophilic nano-Mg(OH)2 and the hydrophobic PET fabrics. The results indicated that the suitable synthesis conditions of nano-Mg(OH)2 are: Mg2+ concentration 1.5 mg/mL, reaction temperature 50 °C and reaction time 50 min, and the optimal modification conditions of nano-Mg(OH)2 are: modifier ratio 5/5, modification temperature 70 °C and modification time 40 min. The flame retardant test and the antibacterial test showed that the multifunctional PET fabrics had excellent flame retardant and antibacterial properties. [ABSTRACT FROM AUTHOR]

The multifunctional polyethylene terephthalate (PET) fabrics were successfully prepared through a dip-coating technology to endow the flame retardant and antibacterial properties of PET fabrics, which are extensively used in many fields. The flame retardant and antibacterial agent was synthesized by a double drop-reverse precipitation method and surface-modified by the mixtures of titanate coupling agents and stearic acid to result in a good compatibility of the hydrophilic nano-Mg(OH) 2 and the hydrophobic PET fabrics. The results indicated that the suitable synthesis conditions of nano-Mg(OH) 2 are: Mg 2+ concentration 1.5 mg/mL, reaction temperature 50 °C and reaction time 50 min, and the optimal modification conditions of nano-Mg(OH) 2 are: modifier ratio 5/5, modification temperature 70 °C and modification time 40 min. The flame retardant test and the antibacterial test showed that the multifunctional PET fabrics had excellent flame retardant and antibacterial properties.