Search

Water electrolysis is currently a major technique to produce clean hydrogen, which is regarded as a promising and sustainable energy carrier. The efficiency of water electrolysis is highly dependent on the oxygen evolution reaction (OER) on the anode. The evaluation of an OER electrocatalyst is frequently carried out on a three-electrode system in a container of electrolyte. Herein, we found that the electrode positions in the electrolyte container could significantly affect the data acquisition of OER performance. After a detailed investigation, we reveal that the difference of the OER activity of an electrocatalyst at a different position is originated from their different iRu drop and the gas diffusion resistance. For the first time, this work evokes concerns on the accurate evaluation of electrocatalysts regarding the electrode position. For fair comparisons and reliable results, it is strongly suggested to keep the electrode position unchanged in the electrochemical measurements. In addition, the establishment of a standard electrolyzer setup for electrocatalysis evaluation in the electrochemical community is also called for. [ABSTRACT FROM AUTHOR]

Currently, the process of an acidic oxygen evolution reaction (OER) necessitates the use of Iridium dioxygen (IrO2), which is both expensive and incredibly scarce on Earth. Ruthenium dioxygen (RuO2) offers high activity for acidic OERs and presents a potential substitution for IrO2. Nevertheless, its practical application is hindered by its relatively poor stability. In this study, we have developed Mn–doped RuO2 (Mn–RuO2) nanoarrays that are anchored on a titanium (Ti) mesh utilizing a two–step methodology involving the preparation of MnO2 nanoarrays followed by a subsequent Ru exchange and annealing process. By precisely optimizing the annealing temperature, we have managed to attain a remarkably low overpotential of 217 mV at 10 mA cm−2 in a 0.5 M H2SO4 solution. The enhanced catalytic activity of our Mn–RuO2 nanoarrays can be attributed to the electronic modification brought about by the high exposure of active sites, Mn dopant, efficient mass transfer, as well as the efficient transfer of electrons between the Ti mesh and the catalyst arrays. Furthermore, these self–supported Mn–RuO2 nanoarrays demonstrated excellent long–term stability throughout a chronoamperometry test lasting for 100 h, with no discernible changes observed in the Ru chemical states. [ABSTRACT FROM AUTHOR]

Water electrolysis is a compelling method for the production of environmentally friendly hydrogen, minimizing carbon emissions. The electrolysis of water heavily relies on an effective and steady oxygen evolution reaction (OER) taking place at the anode. Herein, we introduce a highly promising catalyst for OER called CoSe2@NiFeOOH arrays, which are supported on nickel foam. This catalyst, referred to as CoSe2@NiFeOOH/NF, is fabricated through a two-step process involving the selenidation of a Co-based porous metal organic framework and subsequent electrochemical deposition on nickel foam. The CoSe2@NiFeOOH/NF catalyst demonstrates outstanding activity for the OER in an alkaline electrolyte. It exhibits a low overpotential (η) of 254 mV at 100 mA cm−2, a small Tafel slope of 73 mV dec−1, and excellent high stability. The good performance of CoSe2@NiFeOOH/NF can be attributed to the combination of the high conductivity of the inner layer and the synergistic effect between CoSe2 and NiFeOOH. This study offers an effective method for the fabrication of highly efficient catalysts for an OER. [ABSTRACT FROM AUTHOR]

The Industrial Internet of Things (IIoT) refers to the application of the IoT in the industrial field. The development of fifth-generation (5G) communication technology has accelerated the world's entry into the era of the industrial revolution and has also promoted the overall optimization of the IIoT. In the IIoT environment, challenges such as complex operating conditions and diverse data transmission have become increasingly prominent. Therefore, studying how to collect and process a large amount of real-time data from various devices in a timely, efficient, and reasonable manner is a significant problem. To address these issues, we propose a three-level networking model based on distributed sensor self-networking and cloud server platforms for networking. This model can collect monitoring data for a variety of industrial scenarios that require data collection. It enables the processing and storage of key information in a timely manner, reduces data transmission and storage costs, and improves data transmission reliability and efficiency. Additionally, we have designed a feature fusion network to further enhance the amount of feature information and improve the accuracy of industrial data recognition. The system also includes data preprocessing and data visualization capabilities. Finally, we discuss how to further preprocess and visualize the collected dataset and provide a specific algorithm analysis process using a large manipulator dataset as an example. [ABSTRACT FROM AUTHOR]

The preparation of a high performance and durability with low-platinum (Pt) loading oxygen reduction catalysts remains a challenge for the practical application of fuel cells. Alloying Pt with a transition metal can greatly improve the activity and durability for oxygen reduction reaction (ORR). In this work, we present a one-pot wet-chemical strategy to controllably synthesize carbon supported sub-5 nm PtNi nanocrystals with a ~3% Pt loading. The as-prepared PtNi/C-200 catalyst with a Pt/Ni atomic ratio of 2:3 shows a high oxygen reduction activity of 0.66 A mgpt−1 and outstanding durability over 10,000 potential cycles in 0.1 M KOH in a half-cell condition. The PtNi/C-200 catalyst exhibits the highest ORR activity, with an onset potential (Eonset) of 0.98 V and a half-wave potential (E1/2) of 0.84 V. The mass activity and specific activity are 3.89 times and 9.16 times those of 5% commercial Pt/C. More importantly, this strategy can be applied to the gram-scale synthesis of high-efficiency electrocatalysts. As a result, this effective synthesis strategy has a significant meaning in practical applications of full cells. [ABSTRACT FROM AUTHOR]