Search

Colletotrichum species are the most common cause of maize anthracnose, which often manifests as leaf spots. However, field observations often reveal symptoms similar to those caused by other leaf spot pathogens, such as Curvularia and Bipolaris. In this study, 99 isolates were identified using tissue separation and single-spore isolation techniques. As preliminary measures of species diversity, all 99 isolates were identified morphologically, and the glyceraldehyde-3-phosphate dehydrogenase (GAPDH) gene sequences were phylogenetically analyzed. Furthermore, 48 representative strains were selected for molecular identification using multi-locus phylogenetic analyses based on five gene loci (ITS, TUB, ACT, GAPDH, and CAL). Finally, 10 species of Colletotrichum isolated from maize leaf spots were identified. Colletotrichum cliviicola was the most dominant species (24.2%), followed by C. fructicola (18.2%), C. karstii (16.1%), C. siamense (13.1%), C. boninense (7.1%), C. kahawae (7.1%), C. brevisporum (6.1%), C. truncatum (5.1%), C. gigasporum (2.0%), and C. gloeosporioides (1.0%). For the first time, pathogenicity tests revealed that C. cliviicola, C. fructicola, C. siamense, C. karstii, and C. truncatum are the causative agents of maize anthracnose. Additionally, C. boninense was identified as an endophytic fungus on healthy maize. In conclusion, this study is the first to identify the pathogen of maize anthracnose in Sichuan Province. It provides valuable insights for accurately diagnosing and managing maize anthracnose. [ABSTRACT FROM AUTHOR]

Asterarcys quadricellularis strain AQYS21, a green microalga isolated from the brackish waters near Manseong-ri Black Sand Beach in Korea, shows considerable potential as a source of bioactive compounds and biofuels. Therefore, this study analyzed the morphological, molecular, and biochemical characteristics of this strain; optimized its cultivation conditions; and evaluated its suitability for biodiesel production. Morphological analysis revealed characteristics typical of the Asterarcys genus: spherical to ellipsoidal cells with pyrenoid starch plates and mucilage-embedded coenobia. Additionally, features not previously reported in other A. quadricellularis strains were observed. These included young cells with meridional ribs and an asymmetric spindle-shaped form with one or two pointed ends. Molecular analysis using small-subunit rDNA and tufA sequences confirmed the identification of the strain AQYS21. This strain showed robust growth across a wide temperature range, with optimal conditions at 24 °C and 88 µmol m−2s−1 photon flux density. It was particularly rich in ω-3 α-linolenic acid and palmitic acid. Furthermore, its biodiesel properties indicated its suitability for biodiesel formulations. The biomass of this microalga may serve as a viable feedstock for biodiesel production and a valuable source of ω-3 fatty acids. These findings reveal new morphological characteristics of A. quadricellularis, enhancing our understanding of the species. [ABSTRACT FROM AUTHOR]

The objective of this study was to evaluate the genetic diversity among traditional common bean accessions through morphological descriptors and molecular markers. Sixty-seven common bean accessions from the Germplasm bank of the Instituto Federal of Espírito Santo—Campus de Alegre were evaluated. For this, 25 specific morphological descriptors were used, namely 12 quantitative and 13 qualitative ones. A diversity analysis based on morphological descriptors was carried out using the Gower algorithm. For molecular characterization, 23 ISSR primers were used to estimate dissimilarity using the Jaccard Index. Based on the dendrograms obtained by the UPGMA method, for morphological and molecular characterization, high genetic variability was observed between the common bean genotypes studied, evidenced by cophenetic correlation values in the order of 0.99, indicating an accurate representation of the dissimilarity matrix by the UPGMA clustering. In the morphological characterization, high phenotypic diversity was observed between the accessions, with grains of different shapes, colors, and sizes, and the accessions were grouped into nine distinct groups. Molecular characterization was efficient in separating the genotypes in the Andean and Mesoamerican groups, with the 23 ISSR primers studied generating an average of 6.35 polymorphic bands. The work identified divergent accessions that can serve different market niches, which can be indicated as parents to form breeding programs in order to obtain progenies with high genetic variability. [ABSTRACT FROM AUTHOR]

Despite the economic and ecological importance of the carob tree, few studies are available on the morphological characterization and chemical composition of carob in Algeria. This has resulted in the lack of selection of commercial cultivars of high seed and sugar content. The present study aims to assess the diversity of 11 wild and 1 cultivated carob populations in various regions of Algeria, characterized by diverse geographical and climatic conditions. The final objective is to assess the diversity of neglected carob plants that exhibit superior fruit quality traits and/or are well adapted to different pedoclimatic conditions. The current study focuses on analyzing pod and seed diversity by investigating 12 morphological and 5 physiochemical traits. The analysis of variance revealed significant differences between populations (p < 0.001) for all traits studied, indicating high morphological and chemical variability among these carob populations. Principal component analysis (PCA) was employed to study the relationship between these traits and the geographical origin. High seed yields characterized wild populations, whereas cultivated populations were rich in sugar. Based on morphological traits of pods, seeds and chemical compositions, a hierarchical clustering grouped the carob populations into four groups. The findings of this study represent a significant advancement towards establishing effective cultivar breeding programs in Algeria. They demonstrate that the germplasm examined in this research exhibits an optimal level of morphological and chemical diversity, which is instrumental in the identification of specific traits of both commercial and environmental significance. [ABSTRACT FROM AUTHOR]

As a common method for preparing micron powder in industrial operations, the mechanical extrusion method simply pursues the particle size without considering the microstructure characteristics of sepiolite, which leads to problems such as bundles of sepiolite not being effectively dispersed, and thus the disruption of fibers is inevitably caused. In this work, a new micronization method for disaggregating these bundles while preserving the original structural integrity of the fibers is proposed based on steam pressure changes. The effects of steam pressure changes on the particle size distribution, microstructure, and properties of treated sepiolite are studied using X-ray fluorescence spectrometer (XRF), X-ray diffractometer (XRD), Field Emission Scanning Electron Microscopy (FESEM), Transmission Electron Microscopy (TEM), and a specific surface area and aperture analyzer (BET). The experimental results show that the particle size of sepiolite powder depends greatly on steam pressure, and sepiolite powder with mass ratio of 91.6% and a particle size D97 of 21.27 μm is obtained at a steam pressure of 0.6 MPa. Compared to the sepiolite after mechanical extrusion, the sepiolite treated with steam pressure changes can maintain the integrity of its crystalline structure. The specific surface area of sepiolite enhanced from 80.15 m2 g−1 to 141.63 m2 g−1 as the steam pressure increased from 0.1 to 0.6 MPa, which is about 1.6 times that of the sample treated with mechanical extrusion. [ABSTRACT FROM AUTHOR]

The East African Highland banana (Mutika/Lujugira subgroup) is composed of triploid (AAA) cooking and beer banana varieties that are adapted to the high-altitude region of the Great Lakes region of East Africa. Banana production is affected by several biotic and abiotic factors. Breeding opportunities in bananas are limited due to female sterility and parthenocarpy. The genetic diversity of crops enables breeders to develop new germplasm. Molecular markers have been used widely to dissect crop plants' genetic diversity. This study assessed the genetic variation in 27 varieties from the Mutika/Lujugira subgroup using random amplified polymorphic DNA (RAPD). No genetic variation was observed among the banana varieties, and the 18 ten-mer primers produced monomorphic banding profiles. The genetic homogeneity of this banana subgroup is not congruent with their extensive morphological variation. Domestication and the bottleneck effect are often cited as the cause of reduced diversity in crop plants. On the other hand, several mechanisms, including somatic mutations, transposable elements, polyploidy, genome plasticity, and epigenetic mechanisms, are known to increase plant phenotypic variability. Further in-depth research is needed to explain the puzzle between the genetic and morphological diversity in the Mutika/Lujugira subgroup. [ABSTRACT FROM AUTHOR]

This article describes the synthesis of hydroxyapatite (HAp) flakes through a microwave-assisted hydrothermal method. These flakes suggest possible applications as a substrate for depositing titanium dioxide (TiO2) films using chemical vapor deposition with metal–organic precursors (MOCVD). The results reveal the formation of crystalline hydroxyapatite characterized by a uniform morphology. Additionally, we demonstrated the successful deposition of TiO2 coatings on the hydroxyapatite flakes, resulting in a distinctive faceted prism morphology. Our findings affirm the effective synthesis of the HAp/TiO2 composite material. To further explore the material's practical applications, we recommend assessing the photocatalytic activity of these composite membranes in future research. [ABSTRACT FROM AUTHOR]

All–trans–retinoic acid (ATRA) has long been known to affect cell growth and differentiation. To improve ATRA's therapeutic efficacy and pharmacodynamics, several delivery systems have been used. In this study, free ATRA and anionic–liposome–encapsulated ATRA were compared for their effects on SK–N–SH human neuroblastoma cell growth and differentiation. Anionic liposomes made of L– α –phosphatidylcholine (PC) and L– α –phosphatidic acid (PA), empty (PC–PA) and loaded with ATRA (PC–PA–ATRA), were characterized by dynamic light scattering (DLS) and electrophoretic mobility measurements, and drug entrapment efficiency (EE%) was measured to evaluate the applicability of the new colloidal formulation. The results of brightfield microscopy and cell growth curves indicated that ATRA, whether free or encapsulated, reduced growth and induced differentiation, resulting in SK–N–SH cells changing from epithelioid to neuronal–like morphologies, and producing a significant increase in neurite growth. To further characterize the neuro-differentiation of SK–N–SH cells, the expression of βIII–Tubulin and synaptophysin and mitochondria localization were analyzed via immunofluorescence. Increased expression of neuronal markers and a peculiar localization of mitochondria in the neuritic extensions were apparent both in ATRA– and PC–PA–ATRA–differentiated cells. As a whole, our results strongly indicate that ATRA treatment, by any means, can induce the differentiation of parent SK–N–SH, and they highlight that its encapsulation in anionic liposomes increases its differentiation ability in terms of the percentage of neurite–bearing cells. Interestingly, our data also suggest an unexpected differentiation capability of anionic liposomes per se. This work highlights the importance of developing and carefully testing novel delivery nanocarriers, which are a necessary first "step" in the development of new therapeutic settings. [ABSTRACT FROM AUTHOR]

The growing interest in maize landraces over the past two decades has led to the need to characterize the Italian maize germplasm. In Italy, hundreds of maize landraces have been developed, but only a few of them have been genetically characterized, and even fewer are currently employed in agriculture or for breeding purposes. In the present study, 13 maize landraces of the west Emilia-Romagna region were morphologically and genetically characterized. These accessions were sampled in 1954 from three provinces, Modena, Parma, and Piacenza, during the characterization project of Italian maize landraces. The morphological characterization of these 13 accessions was performed according to the UPOV protocol CPVO/TP2/3, examining 34 phenotypic traits. A total of 820 individuals were genotyped with 10 SSR markers. The genetic characterization revealed 74 different alleles, a FST mean value of 0.13, and a Nm mean of 1.73 over all loci. Moreover, AMOVA analysis disclosed a low degree of differentiation among accessions, with only 13% of genetic variability found between populations, supporting PCoA analysis results, where the first two coordinates explained only 16% of variability. Structure analysis, supported by PCoA, showed that only four accessions were clearly distinguished for both K = 4 and 6. Italian landraces can be useful resources to be employed in maize breeding programs for the development of new varieties, adapted to different environmental conditions, in order to increase crop resilience and expand the maize cultivation area. [ABSTRACT FROM AUTHOR]

Featured Application: In this paper, a metamaterial design based on lightweight geopolymeric elements was reported for applications in acoustic insulation. The paper compares and evaluates the influence of the presence of perforations on the sound absorption coefficient (SAC) of a negative stiffness metamaterial based on a foamed ceramic geopolymer. Chemical–physical, microstructural, dynamic–mechanical, and sound characterisations are presented. A rigid, lightweight geopolymeric porous material has been prepared using an inorganic/organic monomeric mixture containing oligomeric sialates and siloxanes foamed with aluminium powder. This process results in an amorphous rigid light foam with an apparent 180 Kg/m3 density and a 78% open-pore. The viscoelastic characterisation by dynamic mechanical analysis (DMA) carried out from 10−3 to 103 Hz indicates the behaviour of a mechanical metamaterial with negative stiffness enabling ultrahigh energy absorption at straining frequencies from 300 to 1000 Hz. The material loss factor (the ratio of dissipative/elastic shear moduli) is about 0.03 (essentially elastic behaviour) for frequencies up to 200 Hz to suddenly increase up to a value of six at 1000 Hz (highly dissipative behaviour). The corresponding storage and loss moduli were 8.2 MPa and 20 MPa, respectively. Impedance tube acoustic absorption measurements on perforated and unperforated specimens highlighted the role of perforation-resonant cavities in enhancing sound absorption efficiency, particularly within the specified frequency band where the mass of the negative stiffness foamed geopolymer matrix magnifies the dissipation effect. In the limits of a still exploratory and comparative study, we aimed to verify the technological transfer potentiality of using architected metamaterials in sustainable building practices. [ABSTRACT FROM AUTHOR]

Watermelon is a crucial horticultural crop worldwide but its genetic base has become extremely narrow owing to long-term cultivation. Induced mutagenesis can create a range of variations with distinctive agricultural characteristics. To broaden the genetic diversity of watermelon, we established a mutagenesis library containing over 4000 M1 seeds from an inbred line 'M08', which was irradiated by 350 Gy of 60Co γ-rays for 3 h. The rates of germination, emergence, and survival of the M1 seeds were reduced by 5.88%, 18.66%, and 41.96%, respectively. After phenotypic screening, 20 and 10 types of morphological changes were observed in the M1 and M2 generations, with approximately 10.57% and 14.17% mutation frequencies, respectively. Six mutants with desirable horticultural alterations were selected for additional presentation, including the leaf color mutant C1-NO.1, the yellow peel mutant C1-NO.2, the pericarp thickening mutant C1-NO.3, the pericarp thinning mutant C1-NO.4, the seedless mutant C1-NO.5, and the C2-No.1 mutant with normal female flowers and malformed male flowers. Moreover, the three mutants M1-3, M2-1, and M1-5 were identified from our EMS-induced M2 library, exhibiting the fusiform fruit, the dark green peel, and the yellow leaves, respectively. Compared to the wild type (WT), the photosynthetic pigments and parameters were negatively impacted in the yellow-leaf mutant M1-5. For example, the total chlorophyll was 1.22 and 2.22 mg/g in the young and mature leaves of M1-5, respectively, which were significantly lower than those in the WT (2.58 and 2.90 mg/g, respectively). Notably, some mutagenesis phenotypes could be stably inherited, including traits such as yellow leaf color, fusiform fruit shape, and thickening and thinning pericarp. Taken together, these results indicate that these two mutant libraries serve as essential resources to discover new phenotypic germplasms, thereby facilitating the genetic breeding and functional gene exploration in watermelon. [ABSTRACT FROM AUTHOR]

The wild grapevine, Vitis vinifera subsp. sylvestris, grows naturally throughout the northern hemisphere, including the Mediterranean region. Wild grapevines have also been observed sporadically across the southern Levant and are considered a non-native feral plant. Nevertheless, no formal characterization has been conducted for wild grapevines in this region; thus, its taxonomical assignment remains elusive. Previously, we have shown that the wild grapevine populations growing in northern Israel are genetically separated from the feral domesticated forms. This work aimed to comprehensively describe the morphological, anatomical, and ecological traits of wild grapevines naturally thriving in two distinct habitats in Israel. The dioicous nature of the wild grapevine, the flower and pollen morphology, and the characteristic Sylvestris fruit and seed morphology, in addition to the occurrence of the natural germination of seeds in close vicinity of the mother plant, have all led to the conclusion that these plants belong to Vitis vinifera subsp. sylvestris and should be included in the Flora Palaestina. These findings, combined with the recently published genetic evidence for these populations, significantly advance our understanding of the species' ecology and the importance of its preservation. [ABSTRACT FROM AUTHOR]

The potato rot nematode (Ditylenchus destructor) is one of the most destructive pests in the production of tuber crops, resulting in severely decreased yields and inferior product quality. In 2021, a great number of nematodes were detected in the roots of Mazus japonicus, a weed that is harmful to crop growth, in Qingdao, Shandong Province, China. The present study was undertaken to characterize and identify the nematodes isolated from M. japonicus through morphological identification and molecular approaches. Their morphological characteristics were highly consistent with the descriptions of D. destructor Thorne, 1945. The nematodes collected from M. japonicus were identified as D. destructor haplotype B using D1/D2 and sequence characterized amplified region (SCAR) primers. PCR-ITS-RFLP analysis was conducted to monitor intraspecific variations. In addition, the phylogenetic analysis of the internal transcribed spacer (ITS) demonstrated that this D. destructor population was clustered in haplotype B, supported by a 100% bootstrap value. Another assay, in which M. japonicus was inoculated with a mixture of the life stages of D. destructor, was performed. This assay showed that M. japonicus exhibited a high susceptibility to D. destructor in pots. This is the first record of D. destructor parasitizing M. japonicus in China, and it is of great importance because M. japonicus could be a potential reservoir for D. destructor in the field. [ABSTRACT FROM AUTHOR]

Genetic information obtained from ancestral species of wheat and other registered wheat has brought about critical research, especially in wheat breeding, and shown great potential for the development of advanced breeding techniques. The purpose of this study was to determine correlations between some morphological traits of various wheat (Triticum spp.) species and to demonstrate the application of MARS and CHAID algorithms to wheat-derived data sets. Relationships among several morphological traits of wheat were investigated using a total of 26 different wheat genotypes. MARS and CHAID data mining methods were compared for grain yield prediction from different traits using cross-validation. In addition, an optimal CHAID tree structure with minimum RMSE was obtained and cross-validated with nine terminal nodes. Based on the smallest RMSE of the cross-validation, the eight-element MARS model was found to be the best model for grain yield prediction. The MARS algorithm proved superior to CHAID in grain yield prediction and accounted for 95.7% of the variation in grain yield among wheats. CHAID and MARS analyses on wheat grain yield were performed for the first time in this research. In this context, we showed how MARS and CHAID algorithms can help wheat breeders describe complex interaction effects more precisely. With the data mining methodology demonstrated in this study, breeders can predict which wheat traits are beneficial for increasing grain yield. The adaption of MARS and CHAID algorithms should benefit breeding research. [ABSTRACT FROM AUTHOR]

Holoparasitic broomrape weeds (Orobanche and Phelipanche spp.) are a major biotic constraint limiting the production of important food crops. Parasitism caused by Phelipanche spp. is considered to be a serious threat, particularly in the Mediterranean region. In this study, the broomrape species collected from infested fennel fields in Sid L'Mokhtar in the Central West of Morocco was described and identified morphologically and molecularly. For molecular identification, 700 bp ITS regions were PCR-amplified from two representative individuals, OA and OY-4. The obtained sequences exhibited more than 99% similarity with the P. schultzii sequence (MT026593). In addition, maximum likelihood analysis placed our species with other referred P. schultzii in the same clade. Through molecular analysis, the broomrape species attacking fennel was identified as P. schultzii. This is the first record of the broomrape species P. schultzii parasitizing fennel (Foeniculum vulgare syn. Foeniculum officinale) in Morocco. Therefore, it should be considered that this parasite could spread to other cultivated fields causing severe yield losses, requiring urgent action through efficient control measures to avoid further spread of this parasitic weed. [ABSTRACT FROM AUTHOR]

Peculiar non-vascular ceramic slabs of uncertain use were found in two different Etruscan settlements of the Po Delta region (San Basilio di Ariano nel Polesine and Adria, North-East Italy) dated back to the first millennium BC. Different interpretations concerning the primary role of these fragments have been suggested by previous scholars. To bring to light an understanding of the construction processes that appear to be unique to the San Basilio and Adria settlements, a multi-analytical approach has been carried out. Macroscopic observations enabled these materials to be preliminary subdivided into groups based on chromatic features, followed by the identification of their chemical composition through FTIR-ATR spectroscopy. Moreover, the open porosity was estimated by the total water absorption test, and the superficial morphology and elemental composition of specific samples were analyzed using SEM-EDS. Furthermore, the firing temperature of a few selected fragments was evaluated by the TGA-DSC technique in order to investigate ancient production techniques. The results of the research lead us to consider the role of these peculiar non-vascular ceramic slabs as building materials due to their specific protective properties, considering the environmental conditions of the Po Delta region. [ABSTRACT FROM AUTHOR]

Among the 26 roughness parameters described in ISO 25178 standard, the parameters used to characterize surface performance in characterization parameter set (CPS) lack scientificity and unity, resulting in application confusion. The current CPS comes from empirical selection or small sample experiments, thus featuring low generality. A new method for constructing CPS in rough surfaces is proposed to solve the above issues. Based on a data mining method, statistical theory, and roughness parameters definitions, the 26 roughness parameters are divided into CPS and redundant parameter sets (RPS) with the help of reconstructed surfaces and machining experiments, and the mapping relationships between CPS and RPS are established. The research shows that RPS accounts for 50%, and CPS, of great significance for surface performance, and has the ability to fully cover surface topography information. The birth of CPS provides an accurate parameter set for the subsequent study of different surface performance, and it provides more effective parameters for evaluating the workpiece surface performance from the same batch. [ABSTRACT FROM AUTHOR]

The titica vine fiber (TVF) (Heteropsis flexuosa) is a natural lignocellulose fiber (NLF) from the Amazon rainforest that was, for the first time, investigated in terms of its basic properties such as dimensions, porosity, and density as well as its chemical composition, moisture content, crystallinity, and microfibrillar angle. In this study, the apparent density of TVF was determined as one of the lowest-ever reported for NLFs). Using both the geometric method and Archimedes' principle, density values in the range of 0.5–0.6 g/cm3 were obtained. The moisture content was measured as around 11%, which is in accordance with the commonly reported values for NLFs. The TVF exhibited a high porosity, approximately 70%, which was confirmed by SEM images, where a highly porous morphological structure associated with the presence of many voids and lumens was observed. The crystallinity index and microfibrillar angle were determined as 78% and 7.95°, respectively, which are of interest for a stiff NLF. A preliminary assessment on the mechanical properties of the TVFs revealed a tensile strength, Young's modulus, and elongation of 26 MPa, 1 GPa, and 7.4%, respectively. Furthermore, the fiber presented a critical length of 7.62 mm in epoxy matrix and an interfacial shear strength of 0.97 MPa. These results suggest the TVFs might favors applications where lighter materials with intermediate properties are required. [ABSTRACT FROM AUTHOR]

Prunus serotina is divided into five subspecies. Among these, P. serotina subsp. capuli, commonly known as capuli, is native to Central and South America. Its fruits are big, sweet, and consumed by locals in various forms, with the Ecuadorian Andes region providing the best fruit forms of capuli. The objective of this study was to characterize a collection of different genotypes of capuli's fruit, and their endocarps, found growing in the wild in the Chimborazo, Tungurahua, and Cotopaxi provinces of Ecuador. The fruits were characterized for weight (11.7–50.3 g), diameter (12.4–21.7 mm), height (11.4–19.7 mm), and soluble solids content (SSC) (13.4–27.6 °Brix) across two years. Similarly, the endocarps' diameters (7.5–12.2 mm) and heights (8.1–13.6 mm) were measured. Significant differences were found for all the fruit and endocarp variables studied. A multivariate analysis showed that all the fruit and endocarp size characteristics, except SSC, were positively correlated with each other within a season. No clear population differentiation was seen among the genotypes from different provinces, suggesting a lack of clear morphological differentiation. The future breeding and selection of a capuli with superior, commercial, large fruit and a high SSC shows great potential. [ABSTRACT FROM AUTHOR]

Hybridization and polyploidy are major drivers of plant evolution. In Centaurea (Asteraceae), both mechanisms are frequent and lead to reticulate evolutions. However, in the Western Mediterranean section, Seridia studies are scarce. In this section, Centaurea aspera forms a complex including four European diploid and one Moroccan autotetraploid subspecies, an allopolyploid, and hybrids among them. Here, we aimed to delimit the different taxa, identify any introgressions, and discuss their evolutionary history. Samples of all taxa were analysed using 1688 SNPs obtained through GBS and were morphologically characterized. Three genetically well-differentiated clusters were observed, corresponding to the allopolyploid C. seridis, the diploid C. aspera and the cryptic autotetraploid C. aspera ssp. gentilii, which is proposed to be considered as a species. Centaurea seridis showed a high isolation by distance, a greater morphological variability, and a lack of interspecific gene flow. Diploid and autotetraploid C. aspera individuals were morphologically similar, and some introgressions were detected in Southern Spain, where new forms may promote diversification. This gene flow might have taken place during the Messinian and before autopolyploidization occurred in Morocco. In the C. aspera complex, current interspecific barriers are strong, while polyploidization may provide a better adaptation to drier environments. [ABSTRACT FROM AUTHOR]

Luffa sponge gourd (Luffa cylindrica) is an important cucurbitaceous vegetable and is known as the source of loofah. From 2020 to 2021, a leaf disease occurred on luffa leaves in the Hunan Province of China. Symptoms were displayed as oval to irregular chlorotic lesions surrounded by yellow halos. The pathogens were isolated from the affected leaves. According to morphological characterization and molecular identification using multi-locus phylogenetic analysis of the internal transcribed spacer (ITS), actin (ACT), chitin synthase (CHS-1), glyceraldehyde-3-phosphate dehydrogenase (GAPDH), β-tubulin (TUB2), and partial mating type (Mat1-2) gene (ApMAT) regions, the pathogens were identified as two Colletotrichum species: Colletotrichum fructicola and C. siamense. Koch's postulates were identified by a pathogenicity test and re-confirmation. To the best of our knowledge, C. fructicola and C. siamense are two new species associated with luffa sponge gourd anthracnose. [ABSTRACT FROM AUTHOR]

The electrical discharge machine (EDM) has been one of the most widely used non-traditional machines in recent decades, primarily used for machining hard materials into various complex shapes and different sizes and, nowadays, used for surface modifications/hard coatings. In this study, the SWOT (strengths, weaknesses, opportunities and threats) of electrical discharge coating was analyzed by conducting a case study. For the purpose of the case study, copper was deposited on the titanium alloy surface (Ti6Al4V). Three electrodes of different copper alloy materials, viz., brass, bronze and copper, were selected for coating the Ti6Al4V surface. Input parameters such as current, pulse-on, pulse-off, flushing pressure and the electrode material were optimized to develop a uniform coating. Experiments were designed according to the L18 orthogonal array, and among them, the samples that showed proper coating, as seen with the naked eye, were selected for morphological and elemental analyses by scanning electron microscopy (SEM) and energy-dispersive X-ray spectroscopy (EDX. Further, the output responses, viz., the material deposition rate (MDR), electrode wear rate (EWR), surface roughness (SR), elemental data (copper (Cu) and zinc (Zn)) and coating thickness (CT), were considered for the optimization of coatings. Implementing the Technique for Order Performance by Similarity to Ideal Solution, copper coating with a thickness of 20.43 µm, developed with an MDR with input parameters of 20 A current, 600 µs pulse-on, 120 µs pulse-off, 0.5 bar flushing pressure and the brass electrode, was selected as the optimum coating. The most influential parameters in this coating process were the current and pulse-on time. In this study, a SWOT table was developed to depict the strengths, weaknesses, opportunities and threats of electrical discharge coating. [ABSTRACT FROM AUTHOR]

Morphological characterization of olive (Olea europaea L.) varieties to detect desirable traits has been based on the training of expert panels and implementation of laborious multiyear measurements with limitations in accuracy and throughput of measurements. The present study compares two- and three-dimensional imaging systems for phenotyping a large dataset of 50 olive varieties maintained in the National Germplasm Depository of Greece, employing this technology for the first time in olive fruit and endocarps. The olive varieties employed for the present study exhibited high phenotypic variation, particularly for the endocarp shadow area, which ranged from 0.17–3.34 cm2 as evaluated via 2D and 0.32–2.59 cm2 as determined by 3D scanning. We found significant positive correlations (p < 0.001) between the two methods for eight quantitative morphological traits using the Pearson correlation coefficient. The highest correlation between the two methods was detected for the endocarp length (r = 1) and width (r = 1) followed by the fruit length (r = 0.9865), mucro length (r = 0.9631), fruit shadow area (r = 0.9573), fruit width (r = 0.9480), nipple length (r = 0.9441), and endocarp area (r = 0.9184). The present study unraveled novel morphological indicators of olive fruits and endocarps such as volume, total area, up- and down-skin area, and center of gravity using 3D scanning. The highest volume and area regarding both endocarp and fruit were observed for 'Gaidourelia'. This methodology could be integrated into existing olive breeding programs, especially when the speed of scanning increases. Another potential future application could be assessing olive fruit quality on the trees or in the processing facilities. [ABSTRACT FROM AUTHOR]

Two inter-subspecific F1 hybrids have been obtained by crossing olive cultivars (‘Frantoio’ and ‘Coratina’) with pollen donors from olive subspecies (Olea europaea subsp. cuspidata) to enrich the germplasm of cultivated olive in southern China. This study aimed to investigate the characterization of morphological traits and molecular markers in the two hybrids and their parents of crosses. The morphological study showed a significant difference between genotypes according to the main discriminative parameters on qualitative and quantitative traits of leaf, fruit, and endocarp. A set of six co-dominant polymorphic simple sequence repeats (SSRs) were used for molecular identification, and SSR analysis confirmed that two progenies were the offspring of their cited parents based on the presence of parental specific SSR alleles. Three single-copy nuclear loci (SCNL) primer pairs were used for amplification of single-copy genes in the two progenies and their parents and after then PCR products were sequenced. Sequence alignment analysis on the effective data showed a total of 15 different base sites between two progenies, which were confirmed as true inter-specific hybrids between olive cultivars and subsp. cuspidata. [ABSTRACT FROM AUTHOR]

The morphology of small gold particles prepared by Volmer-Weber growth on sapphire substrates have been investigated by two different characterization techniques. First, by non-extensive atomic force microscopy (AFM) in combination with optical spectroscopy and modeling of the optical properties using a theoretical model, recently developed in our group. Second, by extensive transmission electron microscopy (TEM). Comparing the results obtained with both techniques demonstrate that for small gold nanoparticles within the quasistatic limit, the morphological properties can be precisely determined by an appropriate theoretical modeling of the optical properties in combination with simple AFM measurements. The apparent mean axial ratio of the nanoparticles, i.e., the axial ratio that corresponds to the center frequency of the ensemble plasmon resonance, is obtained easily from the extinction spectrum. The mean size is determined by the nanoparticle number density and the amount of deposited material, measured by AFM and a quartz micro balance, respectively. To extract the most probable axial ratio of the nanoparticle ensemble, i.e., the axial ratio that corresponds to the most probable nanoparticle size in the ensemble, we apply the new theoretical model, which allows to extract the functional dependence of the nanoparticle shape on its size. The morphological parameters obtained with this procedure will be afterwards compared to extensive TEM measurements. The results obtained with both techniques yield excellent agreement. For example, the lateral dimensions of the nanoparticles after deposition of 15.2 × 1015 atoms/cm2 of gold has been compared. While a mean lateral diameter of (13 ± 2) nm has been extracted from AFM, optical spectroscopy and modeling, a value of (12 ± 2) nm is derived from TEM. The consistency of the results demonstrate the precision of our new model. Moreover, since our theoretical model allows to extract the functional dependence of the nanoparticle size and shape, a relatively simple analysis is sufficient for a full characterization of small noble metal nanoparticles. [ABSTRACT FROM AUTHOR]

This paper proposes the bio-fabrication of a porous scaffold from a selection procedure of elements taking into account biological behavior, using magnesium (Mg) alloyed with calcium (Ca) and zinc (Zn). The proposed scaffold could work as a treatment for specific pathologies in trauma and oncology, on the one hand, in addition to possible applications in osteosynthesis, through contrib-uting to osseointegration and infection control through the release of drugs. Finally, another pos-sible attribute of this alloy could be its use as a complementary treatment for osteosarcoma; this is due to the basification produced by oxidative degradation (attack on cancer cells). The evaluation of cell viability of an alloy of Mg - 25 wt% Ca - 5 wt% Zn will strengthen current perspectives on the use of Mg in the clinical evaluation of various treatments in trauma and oncology. Considera-tions on the preparation of an alloy of Mg - 25 wt% Ca - 5 wt% Zn and its morphological charac-terization will help researchers understand its applicability for the development of new surgical techniques and lead to a deeper investigation of alternative treatments. However, it is very im-portant to bear in mind the mechanical effect of elements such as Ca and Zn on the degradation of the alloy matrix; the best alternative to predict the biological-mechanical potential starts with the selection of the essential-nutritional elements and their mechanical evaluation by mi-cro-indentation due to the fragility of the matrix. Therefore, the morphological evaluation of the specimens of Mg - 25 wt% Ca - 5 wt% Zn will show the crystallinity of the alloy; these results to-gether contribute to the design of biomedical alloys for use in treatments for various medical spe-cialties. The results indicated that cell viability is not affected, and there are no morphological changes in the cells. [ABSTRACT FROM AUTHOR]

The olive tree (Olea europaea L.) is one of the most cultivated crops in the Mediterranean basin. Its economic importance is mainly due to the intense production of table olives and oil. Cultivated varieties are characterized by high morphological and genetic variability and present a large number of synonyms and homonyms. This necessitates the introduction of a rapid and accurate system for varietal identification. In the past, the recognition of olive cultivars was based solely on analysis of the morphological traits, however, these are highly influenced by environmental conditions. Therefore, over the years, several methods based on DNA analysis were developed, allowing a more accurate and reliable varietal identification. This review aims to investigate the evolving history of olive tree characterization approaches, starting from the earlier morphological methods to the latest technologies based on molecular markers, focusing on the main applications of each approach. Furthermore, we discuss the impact of the advent of next generation sequencing and the recent sequencing of the olive genome on the strategies used for the development of new molecular markers. [ABSTRACT FROM AUTHOR]

In this paper, we aim to evaluate the tribological, mechanical, and morphological performance of resin-based friction composites reinforced by sisal fibers with different shapes, namely helical, undulated, and straight shapes. The experimental results show that the shape of the sisal fibers exerts a significant effect on the impact property of the composite materials but no obvious influence on the density and hardness. The friction composite containing the helical-shaped sisal fibers exhibits the best overall tribological behaviors, with a relatively low fade (9.26%), high recovery (98.65%), and good wear resistance (2.061 × 10−7 cm3∙N−1∙m−1) compared with the other two composites containing undulated-shaped fibers and straight-shaped fibers. The impact fracture surfaces and worn surfaces of the composite materials were inspected by scanning electron microscopy, and we demonstrate that adding helical-shaped sisal fibers into the polymer composites provides an enhanced fiber–matrix interface adhesion condition and reduces the extent of fiber debonding and pullout, effectively facilitating the presence of more secondary plateaus on the friction surface, which are responsible for the enhanced tribological and mechanical properties. The outcome of this study reveals that sisal fibers with a helical shape could be a promising candidate as a reinforcement material for resin-based brake friction composite applications. [ABSTRACT FROM AUTHOR]

Zizania latifolia is a perennial plant native to East Asia. The swollen culm of Z. latifolia is a popular vegetable and traditional herbal medicine consumed in China and some other Asian countries. From 2019 to 2021, a sheath rot disease was found in Zhejiang Province of China. Symptoms mainly occurred in the leaf sheath showing as brown necrotic lesions surrounded by yellow halos. The pathogen fungal isolates were isolated from the affected sheaths. Ten representative isolates were selected for morphological and molecular identification by phylogenetic analyses of the translation elongation factor 1-α (TEF1) and the RNA polymerase II subunit beta (RPB2) gene regions. Based on the combined datasets, the fungal isolates were identified as Fusarium andiyazi. Koch's postulates were confirmed by pathogenicity test, re-isolation and re-identification of the fungal isolates. To the best of our knowledge, this is the first report of sheath rot caused by F. andiyazi in Z. latifolia in China. [ABSTRACT FROM AUTHOR]

Eggplant is the fifth economically most important vegetable in the Solanaceae family after tomato, potato, chili, and tobacco. Apart from the well-cultivated brinjal or aubergine eggplant (Solanum melongena L.), two other underutilized eggplant species, the African eggplant (S. macrocarpon L.) and the scarlet eggplant (S. aethiopicum L.), were also cultivated with local importance where the leaves and fruits are used for food and medicinal purposes. The major objectives of the eggplant breeding program are to improve fruit quality, increase yield performance through heterosis breeding, and introduce pest and disease resistances from wild relatives. Europe and Asia hold a wide collection of germplasm resources with significant potential for genetic improvement. While cultivated eggplant is susceptible to several fungi and bacteria, many wild relatives offer potential resistance to these pathogens. In this paper, we review the genetic resources and diversity of cultivated eggplant and its wild relatives. As a point of departure, we examine the economic importance, domestication, taxonomy characterization, and relationships of the crop and its wild relatives. The importance of evaluating and safeguarding wild relatives is highlighted, as crop wild relatives are highly underrepresented. A key section in this study is an overview dedicated to genetic resources, resistance to biotic and abiotic stresses, pre-breeding, and breeding for sustainable eggplant production. [ABSTRACT FROM AUTHOR]

The addition of magnetic particles to inorganic matrices can produce new composites exhibiting intriguing properties for practical applications. It has been previously reported that the addition of magnetite to concrete improves its mechanical properties and durability in terms of water and chloride ions absorption. Here we describe the preparation of novel magnetic geopolymers based on two different matrices (G1 without inert aggregates and G2 with inert quartz aggregates) containing commercial SrFe12O19 particles with two weight concentrations, 6% and 11%. The composites' characterization, including chemical, structural, morphological, and mechanical determinations together with magnetic and electrical measurements, was carried out. The magnetic study revealed that, on average, the SrFe12O19 magnetic particles can be relatively well dispersed in the inorganic matrix. A substantial increase in the composite samples' remanent magnetization was obtained by embedding in the geopolymer SrFe12O19 anisotropic particles at a high concentration under the action of an external magnetic field during the solidification process. The new composites exhibit good mechanical properties (as compressive strength), higher than those reported for high weight concretes bearing a similar content of magnetite. The impedance measurements indicate that the electrical resistance is mainly controlled by the matrix's chemical composition and can be used to evaluate the geopolymerization degree. [ABSTRACT FROM AUTHOR]

The Nanfengmiju (Citrus reticulata cv. Nanfengmiju), a high-quality local variety of mandarin, is one of the major fruit crops in Jiangxi Province, China. Citrus melanose and stem-end rot, two common fungal diseases of Nanfengmiju, are both caused by Diaporthe spp. (syn. Phomopsis spp.). Identification of the Diaporthe species is essential for epidemiological studies, quarantine measures, and management of diseases caused by these fungi. Melanose disease was observed on Nanfengmiju fruit in Jiangxi Province of China in 2016. Based on morphological characterization and multi-locus phylogenetic analyses, three out of 39 isolates from diseased samples were identified as D. passifloricola. Since these three isolates did not cause melanose on citrus fruit in the pathogenicity tests, they were presumed to be endophytic fungi present in the diseased tissues. However, our results indicate that D. passifloricola may persist as a symptom-less endophyte in the peel of citrus fruit, yet it may cause stem-end if it invades the stem end during fruit storage. To the best of our knowledge, this is the first report of D. passifloricola as the causal agent of the stem-end rot disease in Citrusreticulata cv. Nanfengmiju. [ABSTRACT FROM AUTHOR]

This study aimed to morphologically characterize and determine the aflatoxigenic and non-aflatoxigenic Aspergillus flavus isolates. Forty isolates of A. flavus were obtained from sweet corn kernels and soil samples collected from Kampong Raja, Rose Valley, Kea, and Klebang farms in Malaysia. They were cultured on potato dextrose agar (PDA), dichloran rose-bengal chloramphenicol (DRBC), Aspergillusflavus and Aspergillus parasiticus agar (AFPA), and coconut cream agar (CCA). Macromorphological characteristics were determined by observing the colony color and texture, while the micromorphological characteristics were determined by examining the spore color, size, structure, conidiophore structure, and vesicle shape. The production of aflatoxin was determined by direct visualization of the UV fluorescence of A. flavus colonies on CCA. Aflatoxin was qualitatively detected in 18 (45%) isolates of A. flavus using UV fluorescence screening while the remaining 22 (55%) isolates did not exhibit any aflatoxin production. The highest incidence of A. flavus (30%) and aflatoxin production (15%) was recorded in samples from Kampong Raja. On the other hand, isolates from Rose Valley (17%) and Kea (12%) were non-aflatoxigenic. Klebang recorded a 25% incidence of A. flavus in which 15% were aflatoxigenic while 10% were non-aflatoxigenic. The occurrence of aflatoxin-producing A. flavus emphasizes the need for the measure to eradicate their presence in food crops. A biological control treatment utilizing the non-aflatoxigenic strains to compete with the aflatoxigenic ones is underway. Validation of aflatoxin production through high performance liquid chromatography is also ongoing. [ABSTRACT FROM AUTHOR]

Coatings have a fundamental role in covering the external surface of yachts by acting both as protective and aesthetic layers. In particular, fillers represent the essential layer from the point of view of mechanical properties and consist of a polymeric matrix, different extenders and additives, and dispersing agents, with the latter having the role to provide good extender-matrix compatibility. In the present work, the effects of dispersing agents with an ionic or steric action on the interactions between hollow glass microspheres and an epoxy-polyamide resin are evaluated. Un-crosslinked filler materials are studied via rheological tests, whereas the mechanical and morphological properties of the crosslinked samples are assessed. The results clearly indicate that steric dispersing agents provide a much greater compatibility effect compared to ionic ones, owing to their steric hindrance capability, thus leading to better-performing filler materials with a less-marked Payne effect, which is here proved to be an efficient tool to provide information concerning the extent of component interactions in nautical fillers. To the best of our knowledge, this work represents the first attempt to deeply understand the role of dispersing agents, which are until now empirically used in the preparation of fillers. [ABSTRACT FROM AUTHOR]

During the spring of 2014, a wide survey was conducted in one of the most important mango (Mangifera indica) cultivating areas located in Minas Gerais State (Brazil) to ascertain the causal agent of severe anthracnose infections and to evaluate disease susceptibility within a world collection of mango germplasm. Overall, 86 cultivars were monitored and 152 fungal isolates recovered from infected samples were identified by morphological characterization, DNA sequencing and phylogenetic analyses. All isolates were identified as Colletotrichum asianum. Under natural disease pressure, it has been possible to ascertain a variable tolerance degree within the germplasm collection. By applying a categorized classification, cultivars were classified as follows: 10 highly sensitive (11.6%), 13 sensitive (15.1%), 18 moderately sensitive (20.9%), 23 moderately tolerant (26.7%), 11 tolerant (12.8%), and 11 highly tolerant (10.4%). The most susceptible cultivars to anthracnose were Ubà, Quinzenga, Amarelinha da Sementeira followed by Aroeira and Correjo, whereas Mallika followed by Ourinho and Lita resulted in the least susceptible cultivars. To the authors' knowledge, this is the first large-scale evaluation of mango susceptibility to C. asianum infections within a wide number of cultivars. Anthracnose is a serious threat to mango production and assessment of cultivar response to disease could be useful in breeding programs. [ABSTRACT FROM AUTHOR]

Polymeric dielectrics are employed extensively in the power transmission industry, thanks to their excellent properties; however, under normal operating conditions these materials tend to degrade and fail. In this study, samples of low-density polyethylene, polypropylene, polymethyl methacrylate, and polytetrafluorethylene were subjected to corona discharges under nitrogen and air atmospheres. The discharges introduced structural modifications over the polymer surface. From a chemical perspective, the alterations are analogous among the non-fluorinated polymers (i.e., polyethylene (PE), polypropylene (PP), and polymethyl methacrylate (PMMA)). A simulation of the corona discharge allowed the identification of highly reactive species in the proximity of the surface. The results are consistent with the degradation of insulating polymers in high-voltage applications due to internal partial discharges that ultimately lead to the breakdown of the material. [ABSTRACT FROM AUTHOR]

Zanthoxylum zanthoxyloides is a West African forest tree that is used for example against malaria and sickle cell anemia in Burkina Faso. The goal of this study was to analyze the genetic and morphological diversity of the species within wild populations in Burkina Faso, where it is potentially under threat due to the uncontrolled harvesting of its roots. Seventy-two trees from three different sites in Southwestern Burkina Faso were analyzed. Each tree was characterized by 12 traits specifying the period of flowering and maturity as well as morphological characteristics of the stem, leaves, and seeds. The molecular analysis was performed using two plastid DNA regions (psbA-trnH and trnL-trnF) and two nuclear regions (GBSSI and ITS) to identify the genetic diversity of the species for further development of a management plan for ex situ reproduction and in situ conservation. We found variability in morphological traits correlating with the geographic distance of the study sites. The molecular analysis, in contrast, revealed hardly any genetic variability among the tested trees and no population structure. Whether the differences in morphological traits are caused by different environmental conditions or by genetic variability in genes linked to morphological traits needs further testing. The apparent lack of genetic differentiation suggests that germplasm throughout the study region is suitable for planting in conservation actions. Efficient conservation management should involve local communities, especially those interested in traditional medicine. [ABSTRACT FROM AUTHOR]

Considering the major role played by sandwich structures in many fields where high stiffness-to-weight ratio is required, the selection of a suitable core material is of paramount importance. In order to face the environmental problems related to waste disposal, the selection of an eco-friendly core material is now included in the design criteria of sandwich structures. Agglomerated cork is recognized as a good solution that combines satisfactory mechanical performances and eco-sustainability. Many research studies individually addressed cork's morphological, thermal, and mechanical features without providing a comprehensive overview of the relationships that exist between them. In this work, the investigation of the peculiar cork morphology allowed learning more about its good insulation capacity and its impressive recovery capability. The use of dynamic mechanical analysis (DMA) and thermogravimetric analysis (TGA) clarified the influence of temperature on both flexural and compressive performances. The effect of testing parameters such as temperature and speed on agglomerated cork properties was validated through statistical analysis. Moreover, to highlight agglomerated cork advantages and drawbacks, the work provides also a comparison with more traditional polyvinylchloride (PVC) foams commonly used in industrial applications.