Search

The biocide agent LAE (ethyl αN-lauroyl L-arginate chloride) was coupled with poly( -glutamic acid) (PGGA) to form stable ionic complexes with LAE:PGGA ratios of 1 and 0.5. The nanostructure adopted by these complexes and its response to thermal changes were examined in detail by Differential scanning calorimetry (DSC) and X-ray diffraction (XRD) using synchrotron radiation in real time. A layered biphasic structure with LAE filling the space between the polypeptidic sheets was adopted in these complexes. The complexes were stable up to above 250 °C, non-water soluble, and were able to form consistent transparent films. The release of LAE from the complexes upon incubation in aqueous buffer was examined and found to depend on both pH and complex composition. The antibacterial activity of films made of these complexes against Gram-positive (L. monocytogenes and S. aureus) and Gram-negative (E. coli and S. enterica) bacteria was preliminary evaluated and was found to be very high against the formers and only moderate against the later. The bactericide activity displayed by the LAE·PGGA complexes was directly related with the amount of LAE that was released from the film to the environment. [ABSTRACT FROM AUTHOR]

Two series of aliphatic-aromatic copolyesters derived from succinic and 2,5-furandicarboxylic acids, and di-O-2-(hydroxyethyl) resorcinol as diol substituent of either 1,4-butanediol or ethylene glycol, respectively, were obtained by ring opening polymerization(ROP) performed in bulk and catalyzed by Sn(Oct)2. Cyclic oligomers of furandicarboxylate of di-O-2-(hydroxyethyl) resorcinol were successfully synthesized by high-dilution condensation, and then copolymerized with cyclic oligomers of either butylene or ethylene succinate. The synthesized resorcinol-containing succinate-furanoatecopolyesters had Mw oscillating between 50,000 and 30,000 g.mol-1 depending on composition, and they all displayed a nearly random microstructure. They showed an excellent thermal stability with onset decomposition temperatures near 300 °C. They are amorphous with Tg increasing monotonically with the content in resorcinol in both series with values ranging from -30 or -13 °C for butylene and ethylene-based copolyesters, respectively, up to around 45 °C. The resorcinol-containing succinate-furanoate copolyesters showed appreciable hydrolytic degradation when incubated for a few weeks in water under physiological conditions, a behavior that was notably enhanced in the presence of lipases. [ABSTRACT FROM AUTHOR]

A series of poly(butylene succinate) (PBS) ionomers containing up to 14 mol% of sulfonated succinate units have been synthesized by polycondensation in the melt-phase. The copolyesters were obtained with weight average molecular weights oscillating between 33,000 and 72,000 g•mol-1. All copolyesters were semicrystalline with melting temperatures and enthalpies decreasing and glass transition temperatures increasing with the content of ionic units. The thermal stability of PBS was slightly reduced by the incorporation of these units, and it was also found that the copolyesters were stiffer but also more brittle than PBS. The hydrolytic degradability of PBS was enhanced by copolymerization, an effect that was much more pronounced in basic media. [ABSTRACT FROM AUTHOR]

This work explores for the first time the enzymatic synthesis of poly(butylene-co-ε-caprolactone) (PBSCL) copolyesters in bulk using commercially available monomers (dimethyl succinate (DMS), 1,4-butanediol (BD), and ε-caprolactone (CL)). A preliminary kinetic study was carried out which demonstrated the higher reactivity of DMS over CL in the condensation/ring opening polymerization reaction, catalyzed by Candida antarctica lipase B. PBSCL copolyesters were obtained with high molecular weights and a random microstructure, as determined by 13C NMR. They were thermally stable up to 300 °C, with thermal stability increasing with the content of CL in the copolyester. All of them were semicrystalline, with melting temperatures and enthalpies decreasing up to the eutectic point observed at intermediate compositions, and glass transition temperatures decreasing with the content of CL in the copolyester. The use of CALB provided copolyesters free from toxic metallic catalyst, which is very useful if the polymer is intended to be used for biomedical applications. [ABSTRACT FROM AUTHOR]

The enzymatic ring-opening copolymerization (eROP) of globalide (Gl) and pentadecalactone (PDL) was performed in solution from mixtures of the two macrolactones at ratios covering the whole range of comonomeric compositions. The resulting P(Glx-r-PDLy) random copolyesters were aminofunctionalized by thiol-ene reaction with aminoethanethiol. ROP of γ-benzyl-l-glutamate N-carboxyanhydride initiated by P(Glx-r-PDLy)-NH2 provided neutral poly(γ-benzyl-l-glutamate)-grafted copolyesters, which were converted by hydrolysis into negatively charged hybrid copolymers. Both water-soluble and nonsoluble copolymers were produced depending on copolymer charge and their grafting degree, and their capacity for self-assembling in nano-objects were comparatively examined. The emulsion solvent-evaporation technique applied to the chloroform-soluble copolymers grafted with benzyl glutamate rendered well-delineated spherical nanoparticles with an average diameter of 200–300 nm. Conversely, micellar solutions in water were produced from copolyesters bearing grafted chains composed of at least 10 units of glutamic acid in the free form. The copolymer micelles were shown to be able to load doxorubicin (DOX) efficiently through electrostatic interactions and also to release the drug at a rate that was markedly pH dependent. [ABSTRACT FROM AUTHOR]

In this work, we study for the first time, the isothermal crystallization behavior of isodimorphic random poly(butylene succinate)-ran-poly(ε-caprolactone) copolyesters, PBS-ran-PCL, previously synthesized by us. We perform nucleation and spherulitic growth kinetics by polarized light optical microscopy (PLOM) and overall isothermal crystallization kinetics by differential scanning calorimetry (DSC). Selected samples were also studied by real-time wide angle X-ray diffraction (WAXS). Under isothermal conditions, only the PBS-rich phase or the PCL-rich phase could crystallize as long as the composition was away from the pseudo-eutectic point. In comparison with the parent homopolymers, as comonomer content increased, both PBS-rich and PCL-rich phases nucleated much faster, but their spherulitic growth rates were much slower. Therefore, the overall crystallization kinetics was a strong function of composition and supercooling. The only copolymer with the eutectic composition exhibited a remarkable behavior. By tuning the crystallization temperature, this copolyester could form either a single crystalline phase or both phases, with remarkably different thermal properties. [ABSTRACT FROM AUTHOR]

Poly (α-dodecyl γ-glutamate) (PAAG-12) was successfully synthesized from poly(γ-glutamic acid) (PGGA) according to Nuclear Magnetic Resonance (NMR) analyses. PAAG-12 films were prepared and enriched with 5% α-tocopherol, with the aim of using them as novel antioxidant active packaging for food applications. Thermogravimetric Analysis (TGA) characterization determined that α-tocopherol improved thermal stability of films, which is beneficial for industrial processing. Polylactic Acid (PLA) films prepared with the same amount of α-tocopherol were used to set a comparative frame and both types of films were applied to two different food models to assess their protective action against oxidation. Water, 50% ethanol (EtOH) and 95% EtOH were used as food simulants and HPLC analyses were performed to determine diffusion and partition coefficients in PLA and the novel polymer, the latter exhibiting slower release rates. Primary oxidation was measured with peroxide value, which revealed that PAAG-12 films with α-tocopherol protected oil-in-water (O/W) emulsions up to 29 days, complying with the Codex Alimentarius. [ABSTRACT FROM AUTHOR]

Cyclic butylene furandicarboxylate (c(BF)n) and butylene isophthalate (c(BI)n) oligomers obtained by high dilution condensation reaction were polymerized in bulk at 200 °C with Sn(Oct)2 catalyst via ring opening polymerization to give homopolyesters and copolyesters (coPBFxIy) with weight average molar masses in the 60,000–70,000 g·mol−1 range and dispersities between 1.3 and 1.9. The composition of the copolyesters as determined by NMR was practically the same as that of the feed, and they all showed an almost random microstructure. The copolyesters were thermally stable up to 300 °C and crystalline for all compositions, and have Tg in the 40–20 °C range with values decreasing almost linearly with their content in isophthalate units in the copolyester. Both melting temperature and enthalpy of the copolyesters decreased as the content in butylene isophthalate units increased up to a composition 30/70 (BF/BI), at which the triclinic crystal phase made exclusively of butylene furanoate units changed to the crystal structure of PBI. The partial replacement of furanoate by isophthalate units decreased substantially the crystallizability of PBF. [ABSTRACT FROM AUTHOR]

In this work, we study for the first time, the isothermal crystallization behavior of isodimorphic random poly(butylene succinate)- ran -poly(ε-caprolactone) copolyesters, PBS- ran -PCL, previously synthesized by us. We perform nucleation and spherulitic growth kinetics by polarized light optical microscopy (PLOM) and overall isothermal crystallization kinetics by differential scanning calorimetry (DSC). Selected samples were also studied by real-time wide angle X-ray diffraction (WAXS). Under isothermal conditions, only the PBS-rich phase or the PCL-rich phase could crystallize as long as the composition was away from the pseudo-eutectic point. In comparison with the parent homopolymers, as comonomer content increased, both PBS-rich and PCL-rich phases nucleated much faster, but their spherulitic growth rates were much slower. Therefore, the overall crystallization kinetics was a strong function of composition and supercooling. The only copolymer with the eutectic composition exhibited a remarkable behavior. By tuning the crystallization temperature, this copolyester could form either a single crystalline phase or both phases, with remarkably different thermal properties.

The biocide agent LAE (ethyl α N -lauroyl l-arginate chloride) was coupled with poly(γ-glutamic acid) (PGGA) to form stable ionic complexes with LAE:PGGA ratios of 1 and 0.5. The nanostructure adopted by these complexes and its response to thermal changes were examined in detail by Differential scanning calorimetry (DSC) and X-ray diffraction (XRD) using synchrotron radiation in real time. A layered biphasic structure with LAE filling the space between the polypeptidic sheets was adopted in these complexes. The complexes were stable up to above 250 °C, non-water soluble, and were able to form consistent transparent films. The release of LAE from the complexes upon incubation in aqueous buffer was examined and found to depend on both pH and complex composition. The antibacterial activity of films made of these complexes against Gram-positive ( L. monocytogenes and S. aureus ) and Gram-negative ( E. coli and S. enterica ) bacteria was preliminary evaluated and was found to be very high against the formers and only moderate against the later. The bactericide activity displayed by the LAE·PGGA complexes was directly related with the amount of LAE that was released from the film to the environment., Competing Interests: The authors declare no conflict of interest.

Two series of aliphatic-aromatic copolyesters derived from succinic and 2,5-furandicarboxylic acids, and di- O -2-(hydroxyethyl) resorcinol as diol substituent of either 1,4-butanediol or ethylene glycol, respectively, were obtained by ring opening polymerization(ROP) performed in bulk and catalyzed by Sn(Oct)₂. Cyclic oligomers of furandicarboxylate of di- O -2-(hydroxyethyl) resorcinol were successfully synthesized by high-dilution condensation, and then copolymerized with cyclic oligomers of either butylene or ethylene succinate. The synthesized resorcinol-containing succinate-furanoatecopolyesters had M w oscillating between 50,000 and 30,000 g·mol -1 depending on composition, and they all displayed a nearly random microstructure. They showed an excellent thermal stability with onset decomposition temperatures near 300 °C. They are amorphous with T g increasing monotonically with the content in resorcinol in both series with values ranging from -30 or -13 °C for butylene and ethylene-based copolyesters, respectively, up to around 45 °C. The resorcinol-containing succinate-furanoate copolyesters showed appreciable hydrolytic degradation when incubated for a few weeks in water under physiological conditions, a behavior that was notably enhanced in the presence of lipases., Competing Interests: The authors declare no conflict of interest.