Search

Monitoring crop growth and estimating crop yield are essential for managing agricultural production, ensuring food security, and maintaining sustainable agricultural development. Combining the mechanistic framework of a crop growth model with remote sensing observations can provide a means of generating realistic and spatially detailed crop growth information that can facilitate accurate crop yield estimates at different scales. The main objective of this study was to develop a robust estimation methodology of within-field winter wheat yield at a high spatial resolution (20 m × 20 m) by combining a light use efficiency-based model and Sentinel-2 data. For this purpose, Sentinel-2 derived leaf area index (LAI) time series were assimilated into the Simple Algorithm for Yield Estimation (SAFY) model using an ensemble Kalman filter (EnKF). The study was conducted on rainfed winter wheat fields in southern Sweden. LAI was estimated using vegetation indices (VIs) derived from Sentinel-2 data with semi-empirical models. The enhanced two-band vegetation index (EVI2) was found to be a useful VI for LAI estimation, with a coefficient of determination (R2) and a root mean square error (RMSE) of 0.80 and 0.65 m2/m2, respectively. Our findings demonstrate that the assimilation of LAI derived from Sentinel-2 into the SAFY model using EnKF enhances the estimation of within-field spatial variability of winter wheat yield by 70% compared to the baseline simulation without the assimilation of remotely sensed data. Additionally, the assimilation of LAI improves the accuracy of winter wheat yield estimation by decreasing the RMSE by 53%. This study demonstrates an approach towards practical applications of freely accessible Sentinel-2 data and a crop growth model through data assimilation for fine-scale mapping of crop yield. Such information is critical for quantifying the yield gap at the field scale, and to aid the optimization of management practices to increase crop production. [ABSTRACT FROM AUTHOR]

Unmanned aerial systems (UAS) carrying commercially sold multispectral sensors equipped with a sunshine sensor, such as Parrot Sequoia, enable mapping of vegetation at high spatial resolution with a large degree of flexibility in planning data collection. It is, however, a challenge to perform radiometric correction of the images to create reflectance maps (orthomosaics with surface reflectance) and to compute vegetation indices with sufficient accuracy to enable comparisons between data collected at different times and locations. Studies have compared different radiometric correction methods applied to the Sequoia camera, but there is no consensus about a standard method that provides consistent results for all spectral bands and for different flight conditions. In this study, we perform experiments to assess the accuracy of the Parrot Sequoia camera and sunshine sensor to get an indication if the quality of the data collected is sufficient to create accurate reflectance maps. In addition, we study if there is an influence of the atmosphere on the images and suggest a workflow to collect and process images to create a reflectance map. The main findings are that the sensitivity of the camera is influenced by camera temperature and that the atmosphere influences the images. Hence, we suggest letting the camera warm up before image collection and capturing images of reflectance calibration panels at an elevation close to the maximum flying height to compensate for influence from the atmosphere. The results also show that there is a strong influence of the orientation of the sunshine sensor. This introduces noise and limits the use of the raw sunshine sensor data to compensate for differences in light conditions. To handle this noise, we fit smoothing functions to the sunshine sensor data before we perform irradiance normalization of the images. The developed workflow is evaluated against data from a handheld spectroradiometer, giving the highest correlation (R2 = 0.99) for the normalized difference vegetation index (NDVI). For the individual wavelength bands, R2 was 0.80–0.97 for the red-edge, near-infrared, and red bands. [ABSTRACT FROM AUTHOR]

The aim of this paper is to present a proposal for a national building standard in Sweden. We define requirements for the proposed standard, e.g., it should support development of 3D city models, connect to building information models (BIM) and national registers and be based on a national classification system for the urban environment. Based on these requirements we develop an Application Domain Extension (ADE) of the building model in the proposed CityGML 3.0 standard denoted CityGML Sve-Test. CityGML 3.0 includes several new features of interest, e.g., the space concept, enhanced possibilities to convert data, and to link to other standards. In our study we create test data according to CityGML Sve-Test and evaluate it against the requirements. It is shown that BIM models (in Industry Foundation Classes, IFC, format) can be converted to CityGML Sve-Test and that a classification system facilitates this conversion. The CityGML Sve-Test dataset can be used to increase the automation level in building permissions checking and a related study shows that CityGML 3.0 has capabilities to link to legal information and be a base for 3D cadastral index maps. Based on our experience, we suggest that the national building standard should conform to international standards and, if possible, include a classification system. The exchange format (GML, JSON etc.) might change, but to be based on a standardized data model ensures harmonized structures and concepts. [ABSTRACT FROM AUTHOR]

The current three-dimensionally (3D) delimited property units are in most countries registered using two-dimensional (2D) documentation and textual descriptions. This approach has limitations if used for representing the actual extent of complicated 3D property units, in particular in city centers. 3D digital models such as building information model (BIM) and 3D geographic information system (GIS) could be utilized for accurate identification of property units, better representation of cadastral boundaries, and detailed visualization of complex buildings. To facilitate this, several requirements need to be identified considering organizational, legal, and technical aspects. In this study, we formulate these requirements and then develop a framework for integration of 3D cadastre and 3D digital models. The aim of this paper is that cadastral information stored based on the land administration domain model (LADM) are integrated with BIM on building level for accurate representation of legal boundaries and with GIS on city level for visualization of 3D cadastre in urban environments. The framework is implemented and evaluated against the requirements in a practical case study in Sweden. The conclusion is that the integration of the cadastral information and BIM/GIS is possible on both conceptual level and data level which will facilitate that organizations dealing with cadastral information (cadastral units), BIM models (architecture, engineering, and construction companies), and GIS (surveying units on e.g., municipality level) can exchange information; this facilitates better representation and visualization of 3D cadastral boundaries. [ABSTRACT FROM AUTHOR]

Miniaturized thermal infrared (TIR) cameras that measure surface temperature are increasingly available for use with unmanned aerial vehicles (UAVs). However, deriving accurate temperature data from these cameras is non-trivialsince they are highly sensitive to changes in their internal temperature and low-cost models are often not radiometrically calibrated. We present the results of laboratory and field experiments that tested the extent of the temperature-dependency of a non-radiometric FLIR Vue Pro 640. We found that a simple empirical line calibration using at least three ground calibration points was sufficient to convert camera digital numbers to temperature values for images captured during UAV flight. Although the camera performed well under stable laboratory conditions (accuracy ±0.5 °C), the accuracy declined to ±5 °C under the changing ambient conditions experienced during UAV flight. The poor performance resulted from the non-linear relationship between camera output and sensor temperature, which was affected by wind and temperature-drift during flight. The camera's automated non-uniformity correction (NUC) could not sufficiently correct for these effects. Prominent vignetting was also visible in images captured under both stable and changing ambient conditions. The inconsistencies in camera output over time and across the sensor will affect camera applications based on relative temperature differences as well as user-generated radiometric calibration. Based on our findings, we present a set of best practices for UAV TIR camera sampling to minimize the impacts of the temperature dependency of these systems. [ABSTRACT FROM AUTHOR]

The building permission process is to a large extent an analogue process where much information is handled in paper format or as pdf files. With the ongoing digitalisation in society, there is a potential to automate this process by integrating Building Information Models (BIM) of planned buildings and geospatial data to check if a building conforms to the building permission regulations. In this study, an inventory of which regulations in the (Swedish) detailed development plans that can be automatically checked or supported by 3D visualisation was conducted. Then, two of these regulations, the building height and the building footprint area, were studied in detail to find to which extent they can be automatically checked by integration of BIM and geospatial data. In addition, a feasibility study of one visual criterion was conducted. One concern when automating the building permission process is the variability of content within the Industry Foundation Classes (IFC) data model. Variations in modelling methods and model content leads to differences in IFC models' content and structure; these differences complicate automated processes. To facilitate automated processes, requirements on the production of IFC models for building permission applications could be defined in the form of model view definitions or delivery specifications. [ABSTRACT FROM AUTHOR]