Search

The mechanical characteristics of gas hydrate-bearing sediments (HBS) are important for evaluating reservoir stability. The interbedded formation of HBS is common in target mining reservoirs. Existing studies on the triaxial mechanical properties of HBS are primarily based on homogeneous and isotropic samples. Therefore, the stress–strain law of the target mining reservoirs cannot be predicted accurately. In this study, a series of sediment models with interlayers of coarse and fine mineral grains were established based on the PFC3D code, and the influence of the layered distribution characteristics of sediment particles and hydrates on the macroscopic mechanical behaviour of the reservoir was comprehensively analysed. The triaxial compression simulation results indicate that the peak strength, deformation modulus, and cohesion of the layered HBS are significantly lower than those of the homogeneous model. The deformation modulus of the reservoir is mainly affected by the fine-grained layer without hydrates. When the coarse and fine grains correspond to different mineral components, the two minerals are heterogeneous in terms of their micromechanical parameters, which can further reduce the macroscopic mechanical parameters of the HBS. In addition, the layered distribution of hydrate results in significant anisotropy of the reservoir. This study constitutes a reference regarding the control mechanism of gas hydrate reservoir strength. [ABSTRACT FROM AUTHOR]

The distribution of gas contents in the No.5 coal seams of the Weibei Field of southeastern Ordos Basin, North China, is highly variable and its mechanism remains unclear. In this study, systematic evaluation of the gas content and its geological control factors are conducted based on the field investigation together with 16 coalbed methane (CBM) wells in the Weibei Field, southeastern Ordos Basin, North China. The gas content variability is determined from the perspectives of gas generation, migration, and preservation. The results indicate that the gas generation is largely relevant with the subsidence and fluctuation of the coal seam during the middle-late Yanshanian orogeny, which controls the gas content variability of the Weibei Field. Besides, gas migration and preservation determine the gas content on a regional scale, significantly related to fault types, roof lithology, burial depth, and hydrodynamic conditions, but scarcely affected by the roof thickness. In the Weibei Field, the geological models controlling gas content are identified as (1) hydrodynamic trapping of gas in the deep burial depth and thrust faults, and (2) gas loss by groundwater flushing and normal faults. Basically, the first mechanism causes the high gas content of the east zone, whereas the other one is responsible for the low gas content in the west zone of the study area. [ABSTRACT FROM AUTHOR]

The sample size or particle size of shale plays a significant role in the characterization of pores by various techniques. To systematically investigate the influence of particle size on pore characteristics and the optimum sample size for different methods, we conducted complementary tests on two overmature marine shale samples with different sample sizes. The tests included small-angle neutron scattering (SANS), gas (N2, CO2, and H2O) adsorption, mercury injection capillary pressure (MICP), and field emission-scanning electron microscopy (FE-SEM) imaging. The results indicate that artificial pores and fractures may occur on the surface or interior of the particles during the pulverization process, and some isolated pores may be exposed to the particle surface or connected by new fractures, thus improving the pore connectivity of the shale. By comparing the results of different approaches, we established a hypothetical model to analyze how the crushing process affects the pore structure of overmature shales. Our results imply that intact wafers with a thickness of 0.15–0.5 mm and cubic samples (~1 cm3) are optimal for performing SANS and MICP analyses. Meanwhile, the 35–80 mesh particle size fraction provides reliable data for various gas physisorption tests in overmature shale. Due to the intrinsic heterogeneity of shale, future research on pore characteristics in shales needs a multidisciplinary approach to obtain a more comprehensive, larger scale, and more reliable understanding. [ABSTRACT FROM AUTHOR]

Mineralogical and geochemical characteristics of coals provide crucial information on their potential clean, efficient, and integrated utilization. In this paper, the mineralogical and geochemical behaviors of the No. 5 coals of the Taiyuan Formation in the Weibei Coalfield, North China, were investigated, and their geological controlling factors were subsequently discussed. The minerals in the Weibei coals mainly consist of kaolinite (8.3%), calcite (5.0%), and pyrite (3.1%), with minor proportions of tobelite (2.9%), dolomite (1.7%), quartz (1.8%), and traces of siderite (0.4%) and gypsum (0.6%). Several critical elements, including Nb (19.8 mg/kg), Ta (3.6 mg/kg), Zr (71.0 mg/kg) and Li (32.3 mg/kg), occur at concentrations higher than those averages for world hard coals, making the Weibei coals potential sources of these critical elements. Several factors, terrigenous material, seawater invasion, and hydrothermal fluids are responsible for these mineralogical and geochemical characteristics. The L-type rare earth elements and yttrium (REE-Y) enrichment in the roofs and partings, Al2O3-TiO2 and Zr/TiO2-Nb/Y plots, and negative Eu and weak negative Ce anomalies in the Weibei coals indicate a felsic-intermediate dominated sediment provenance primarily derived from the Qilian-Qinling Oldland on the South. Marine bioclastic limestone, negative Ce and positive Y anomalies in coals imply the influence of seawater on the Weibei coals. Last but not least, the cleat-infilling and/or fracture-infilling calcite, pyrite, barite, and tobelite as well as the positive Eu and Gd anomalies, H-type, and M-type REE-Y enrichment patterns suggest the influence of hydrothermal fluids, which lead to re-distribution of some critical elements from roof and parting to the underlying coal seam. [ABSTRACT FROM AUTHOR]