Search

The glacial lakes in the Southeastern Qinghai–Tibet Plateau (SEQTP) have undergone dramatic expansion in the context of global warming, leading to several glacial lake outburst floods (GLOFs) disasters. However, there is a gap and incompleteness in glacial lake inventories across this area due to the heavy cloud cover. In this study, an updated and comprehensive glacial lake inventory was produced by object-based image analysis (OBIA) and manual vectorization based on the Sentinel-1 SAR and Sentinel-2 MSI images acquired in 2022. Detailed steps regarding the OBIA were provided, and the feature set of Sentinel-1 SAR images suitable for extracting glacial lakes was also determined in this paper. We found that the mean combination of ascending-orbit and descending-orbit images is appropriate for mapping glacial lakes. VV-polarized backscattering coefficients from ascending-orbit achieved a better performance for delineating glacial lakes within the study area. Moreover, the distribution of glacial lakes was characterized in terms of four aspects: size, type, elevation, and space. There were 3731 glacial lakes with a total area of 1664.22 ± 0.06 km2 in the study area; most of them were less than 0.07 km2. Ice-contacted lakes were primarily located in the Palongzangbo basin (13.24 ± 0.08 km2). Nyang Qu basin had the most abundant glacial lake resources (2456 and 93.32 ± 0.18 km2). A comparison with previously published glacial lake datasets demonstrated that our dataset is more complete. This inventory is useful for evaluating water resources, studying glacier–glacial lake interactions, and assessing GLOFs' susceptibility in the SEQTP. [ABSTRACT FROM AUTHOR]

Permafrost areas are sensitive to climate change and have a significant impact on energy and water cycles. Ground ice is a crucial component on the Qinghai–Tibetan Plateau (QTP). Understanding the environmental characteristics of ground ice is vital for accurately modeling its distribution and evolution. In this study, we analyzed 15 environmental characteristics of high ice-content permafrost sites. These attributes were extracted from 400 high ice-content permafrost datasets including 300 drilling boreholes and 100 thaw slumps collected throughout the entire plateau using large-scale remote sensing data and their products. The results are as follows: The mean annual air temperature in areas where high ice-content permafrost exists ranges from −5 to −3.5 °C, with an average warming rate of 0.08 °C/a. Additionally, there was an average increase in precipitation of about 25 mm/10a and an increase in soil moisture of about 4%/10a. Geomorphology strongly influences the occurrence of high ice content permafrost, with 85% of high ice-content permafrost development at altitudes between 4400 and 5100 m. Approximately 86% of high ice-content permafrost were developed in lowland or relatively flat areas, preferably in gently sloping and shady slope regions. Soils exhibit less variability in clay particles and more variability in silt and sand. Key indicators in the high ice content permafrost region include warming rate, active layer thickness, elevation, bulk density, soil thickness, clay content, precipitation, soil moisture, and NDVI. High ice-content permafrost is the result of a combination of environmental factors and is expected to undergo significant changes in the future. This study provides a foundation for comprehending the environmental changes in the high ice-content permafrost areas and modeling the distribution of ground ice. It underscores the urgent need to address the significant environmental changes faced by high ice-content permafrost regions. [ABSTRACT FROM AUTHOR]

In this paper, a resin with high adhesion, easy curing, good flexibility, and high temperature resistance was prepared from polyimide fiber paper. First, in order to improve the toughness and curability of impregnating resin, epoxy resin was modified by addition of vinyl silicone resin. Subsequently, ternary resin with high temperature stability was obtained by polyimide resin addition. Among the investigated conditions, the optimal additive amount of vinyl silicone resin and polyimide resin was 30% and 5%, respectively. The prepared ternary resin has better toughness, crosslinking degree, high temperature stability (5% mass loss at 339.2 °C) and no obvious glass transition at high temperature. Finally, the polyimide fiber paper-based composite material was impregnated with modified epoxy resin and ternary resin, respectively. The results shows that the paper-based composite material impregnated with modified epoxy resin has a better fiber bonding degree, a smooth surface, and contact angle could reach up to 148.71°. Meanwhile, the paper-based composite material impregnated with ternary resin has good high temperature resistance, and the tensile index of the paper-based composite material could reach up to 35.1 N·m/g at 200 °C. [ABSTRACT FROM AUTHOR]