Search

Non-invasive fetal electrocardiography (NI-ECG) is based on the acquisition of signals from electrodes on the mother's abdominal surface. This abdominal ECG (aECG) signal consists of the maternal ECG (mECG) along with the fetal ECG (fECG) and other noises and artifacts. These records allow the acquisition of valuable and reliable information that helps ensure fetal well-being during pregnancy. This paper proposes a procedure based on principal component analysis (PCA) to obtain a single-channel master abdominal ECG record that can be used as input to fetal heart rate extraction techniques. The new procedure requires three main processing stages: PCA-based analysis for fECG-component extraction, polarity test, and curve fitting. To show the advantages of the proposal, this PCA-based method has been used as the feeding stage to a previously developed clustering-based method for single-channel aECG fetal heart rate monitoring. The results obtained for a set of real abdominal ECG recordings from annotated public aECG databases, the Abdominal and Direct Fetal ECG Database and the Challenge 2013 Training Set A, show improved efficiency in fetal heart rate extraction and illustrate the benefits derived from the use of such a master abdominal ECG channel. This allows us to achieve proper fetal heart rate monitoring without the need for manual inspection and selection of channels to be processed, while also allowing us to analyze records that would have been discarded otherwise. [ABSTRACT FROM AUTHOR]

Reconfigurable intelligent surfaces (RIS) offer the potential to customize the radio propagation environment for wireless networks, and will be a key element for 6G communications. However, due to the unique constraints in these systems, the optimization problems associated to RIS configuration are challenging to solve. This paper illustrates a new approach to the RIS configuration problem, based on the use of artificial intelligence (AI) and deep learning (DL) algorithms. Concretely, a custom convolutional neural network (CNN) intended for edge computing is presented, and implementations on different representative edge devices are compared, including the use of commercial AI-oriented devices and a field-programmable gate array (FPGA) platform. This FPGA option provides the best performance, with × 20 performance increase over the closest FP32, GPU-accelerated option, and almost × 3 performance advantage when compared with the INT8-quantized, TPU-accelerated implementation. More noticeably, this is achieved even when high-level synthesis (HLS) tools are used and no custom accelerators are developed. At the same time, the inherent reconfigurability of FPGAs opens a new field for their use as enabler hardware in RIS applications. [ABSTRACT FROM AUTHOR]

In this work, a secure architecture to send data from an Internet of Things (IoT) device to a blockchain-based supply chain is presented. As is well known, blockchains can process critical information with high security, but the authenticity and accuracy of the stored and processed information depend primarily on the reliability of the information sources. When this information requires acquisition from uncontrolled environments, as is the normal situation in the real world, it may be, intentionally or unintentionally, erroneous. The entities that provide this external information, called Oracles, are critical to guarantee the quality and veracity of the information generated by them, thus affecting the subsequent blockchain-based applications. In the case of IoT devices, there are no effective single solutions in the literature for achieving a secure implementation of an Oracle that is capable of sending data generated by a sensor to a blockchain. In order to fill this gap, in this paper, we present a holistic solution that enables blockchains to verify a set of security requirements in order to accept information from an IoT Oracle. The proposed solution uses Hardware Security Modules (HSMs) to address the security requirements of integrity and device trustworthiness, as well as a novel Public Key Infrastructure (PKI) based on a blockchain for authenticity, traceability, and data freshness. The solution is then implemented on Ethereum and evaluated regarding the fulfillment of the security requirements and time response. The final design has some flexibility limitations that will be approached in future work. [ABSTRACT FROM AUTHOR]

The accurate tracking of every production step and related outcome in a supply chain is a stringent requirement in safety-critical sectors such as civil aviation. In such a framework, trusted traceability and accountability can be reliably and securely managed by means of blockchain-based solutions. Unfortunately, blockchain cannot guarantee the provenance and accuracy of the stored information. To overcome such a limitation, this paper proposes a secure solution to strongly rely on the tracking information of the physical assets in the supply chain. The proposed solution exploits Hardware Security Modules (HSMs) to provide required cryptographic primitives through a Near-Field Communication (NFC) connection. In our approach, each transfer of the assets is authenticated, verified, and recorded in the blockchain through the HSM. Transaction entries are signed, thus providing a guarantee of ownership and authenticity. The proposed infrastructure has been subject of an exhaustive security analysis and proved resilient against counterfeiting attempts, stakeholder repudiations, and misleading information. [ABSTRACT FROM AUTHOR]

The security of Industrial Internet of Things (IIoT) systems is a challenge that needs to be addressed immediately, as the increasing use of new communication paradigms and the abundant use of sensors opens up new opportunities to compromise these types of systems. In this sense, technologies such as Trusted Execution Environments (TEEs) and Hardware Security Modules (HSMs) become crucial for adding new layers of security to IIoT systems, especially to edge nodes that incorporate sensors and perform continuous measurements. These technologies, coupled with new communication paradigms such as Blockchain, offer a high reliability, robustness and good interoperability between them. This paper proposes the design of a secure sensor incorporating the above mentioned technologies—HSMs and a TEE—in a hardware device based on a dual-core architecture. Through this combination of technologies, one of the cores collects the data extracted by the sensors and implements the security mechanisms to guarantee the integrity of these data, while the remaining core is responsible for sending these data through the appropriate communication protocol. This proposed approach fits into the Blockchain networks, which act as an Oracle. Finally, to illustrate the application of this concept, a use case applied to wine logistics is described, where this secure sensor is integrated into a Blockchain that collects data from the storage and transport of barrels, and a performance evaluation of the implemented prototype is provided. [ABSTRACT FROM AUTHOR]

Collaborative manufacturing is a key enabler of Industry 4.0 that requires secure data sharing among multiple parties. However, intercompany data-sharing raises important privacy and security concerns, particularly given intellectual property and business-sensitive information collected by many devices. In this paper, we propose a solution that combines four technologies to address these challenges: Attribute-Based Encryption for data access control, blockchain for data integrity and non-repudiation, Hardware Security Modules for authenticity, and the Interplanetary File System for data scalability. We also use OpenID for dynamic client identification and propose a new method for user revocation in Attribute-Based Encryption. Our evaluation shows that the solution can scale up to 2,000,000 clients while maintaining all security guarantees. [ABSTRACT FROM AUTHOR]

The generation of random numbers is crucial for practical implementations of cryptographic algorithms. In this sense, hardware security modules (HSMs) include true random number generators (TRNGs) implemented in hardware to achieve good random number generation. In the case of cryptographic algorithms implemented on FPGAs, the hardware implementation of RNGs is limited to the programmable cells in the device. Among the different proposals to obtain sources of entropy and process them to implement TRNGs, those based in ring oscillators (ROs), operating in parallel and combined with XOR gates, present good statistical properties at the cost of high area requirements. In this paper, these TRNGs are revisited, showing a method for area optimization independently of the FPGA technology used. Experimental results show that three ring oscillators requiring only three LUTs are enough to build a TRNG on Artix 7 devices from Xilinx with a throughput of 33.3 Kbps, which passes NIST tests. A throughput of 50 Kbps can be achieved with four ring oscillators, also requiring three LUTs in Artix 7 devices, while 100 Kbps can be achieved using an structure with four ring oscillators requiring seven LUTs. [ABSTRACT FROM AUTHOR]

Microservice architectures exploit container-based virtualized services, which rarely use hardware-based cryptography. A trusted platform module (TPM) offers a hardware root for trust in services that makes use of cryptographic operations. The virtualization of this hardware module offers high usability for other types of service that require TPM functionalities. This paper proposes the design of TPM virtualization in a container. To ensure integrity, different mechanisms, such as attestation and sealing, have been developed for the binaries and libraries stored in the container volumes. Through a REST API, the container offers the functionalities of a TPM, such as key generation and signing. To prevent unauthorized access to the container, this article proposes an authentication mechanism based on tokens issued by the Cognito Amazon Web Service. As a proof of concept and applicability in industry, a use case for electric vehicle charging stations using a microservice-based architecture is proposed. Using the EOS.IO blockchain to maintain a copy of the data, the virtualized TPM microservice provides the cryptographic operations necessary for blockchain transactions. Through a two-factor authentication mechanism, users can access the data. This scenario shows the potential of using blockchain technologies in microservice-based architectures, where microservices such as the virtualized TPM fill a security gap in these architectures. [ABSTRACT FROM AUTHOR]

Battery aging is one of the key challenges that electrochemical energy storage faces. Models for both cycling and calendar aging are valuable for quantitatively assessing their contribution to overall capacity loss. Since batteries are stored and employed under varying conditions of temperature and state of charge in their real-life operation, the availability of a suitable model to anticipate the outcome of calendar aging in lithium-ion batteries under dynamic conditions is of great interest. In this article, we extend a novel model to predict the capacity loss due to calendar aging by using variable-order fractional calculus. For this purpose, some theoretical difficulties posed by variable-order definitions are discussed and compared by applying them to fit experimental results with a multi-parameter optimization procedure. We show that employing a variable-order model allows for a significant improvement in accuracy and predictive ability with respect to its constant-order counterpart. We conclude that variable-order models constitute an interesting alternative for reproducing complex behavior in dynamical systems, such as aging in lithium-ion batteries. [ABSTRACT FROM AUTHOR]

Power noise generation for masking power traces is a powerful countermeasure against Simple Power Analysis (SPA), and it has also been used against Differential Power Analysis (DPA) or Correlation Power Analysis (CPA) in the case of cryptographic circuits. This technique makes use of power consumption generators as basic modules, which are usually based on ring oscillators when implemented on FPGAs. These modules can be used to generate power noise and to also extract digital signatures through the power side channel for Intellectual Property (IP) protection purposes. In this paper, a new power consumption generator, named Xored High Consuming Module (XHCM), is proposed. XHCM improves, when compared to others proposals in the literature, the amount of current consumption per LUT when implemented on FPGAs. Experimental results show that these modules can achieve current increments in the range from 2.4 mA (with only 16 LUTs on Artix-7 devices with a power consumption density of 0.75 mW/LUT when using a single HCM) to 11.1 mA (with 67 LUTs when using 8 XHCMs, with a power consumption density of 0.83 mW/LUT). Moreover, a version controlled by Pulse-Width Modulation (PWM) has been developed, named PWM-XHCM, which is, as XHCM, suitable for power watermarking. In order to build countermeasures against SPA attacks, a multi-level XHCM (ML-XHCM) is also presented, which is capable of generating different power consumption levels with minimal area overhead (27 six-input LUTS for generating 16 different amplitude levels on Artix-7 devices). Finally, a randomized version, named RML-XHCM, has also been developed using two True Random Number Generators (TRNGs) to generate current consumption peaks with random amplitudes at random times. RML-XHCM requires less than 150 LUTs on Artix-7 devices. Taking into account these characteristics, two main contributions have been carried out in this article: first, XHCM and PWM-XHCM provide an efficient power consumption generator for extracting digital signatures through the power side channel, and on the other hand, ML-XHCM and RML-XHCM are powerful tools for the protection of processing units against SPA attacks in IoT devices implemented on FPGAs. [ABSTRACT FROM AUTHOR]

This paper presents and implements a novel remote attestation method to ensure the integrity of a device applicable to decentralized infrastructures, such as those found in common edge computing scenarios. Edge computing can be considered as a framework where multiple unsupervised devices communicate with each other with lack of hierarchy, requesting and offering services without a central server to orchestrate them. Because of these characteristics, there are many security threats, and detecting attacks is essential. Many remote attestation systems have been developed to alleviate this problem, but none of them can satisfy the requirements of edge computing: accepting dynamic enrollment and removal of devices to the system, respecting the interrupted activity of devices, and last but not least, providing a decentralized architecture for not trusting in just one Verifier. This security flaw has a negative impact on the development and implementation of edge computing-based technologies because of the impossibility of secure implementation. In this work, we propose a remote attestation system that, through using a Trusted Platform Module (TPM), enables the dynamic enrollment and an efficient and decentralized attestation. We demonstrate and evaluate our work in two use cases, attaining acceptance of intermittent activity by IoT devices, deletion of the dependency of centralized verifiers, and the probation of continuous integrity between unknown devices just by one signature verification. [ABSTRACT FROM AUTHOR]

The development of devices for the Internet of Things (IoT) requires the rapid prototyping of different hardware configurations. In this paper, a modular hardware platform allowing to prototype, test and even implement IoT appliances on low-cost reconfigurable devices is presented. The proposed platform, named Dracon, includes a Z80-clone microprocessor, up to 64 KB of RAM, and 256 inputs/outputs (I/Os). These I/Os can be used to connect additional co-processors within the same FPGA, external co-processors, communications modules, sensors and actuators. Dracon also includes as default peripherals a UART for programming and accessing the microprocessor, a Real Time Clock, and an Interrupt Timer. The use of an 8-bit microprocessor allows the use of the internal memory of the reconfigurable device as program memory, thereby, enabling the implementation of a complete IoT device within a single low-cost chip. Indeed, results using a Spartan 7 FPGA show that it is possible to implement Dracon with only 1515 6-input LUTs while operating at a maximum frequency of 80 MHz, which results in a better trade-off in terms of area and performance than other less powerful and less versatile alternatives in the literature. Moreover, the presented platform allows the development of embedded software applications independently of the selected FPGA device, enabling rapid prototyping and implementations on devices from different manufacturers. [ABSTRACT FROM AUTHOR]

Security is a critical challenge for the effective expansion of all new emerging applications in the Internet of Things paradigm. Therefore, it is necessary to define and implement different mechanisms for guaranteeing security and privacy of data interchanged within the multiple wireless sensor networks being part of the Internet of Things. However, in this context, low power and low area are required, limiting the resources available for security and thus hindering the implementation of adequate security protocols. Group keys can save resources and communications bandwidth, but should be combined with public key cryptography to be really secure. In this paper, a compact and unified co-processor for enabling Elliptic Curve Cryptography along to Advanced Encryption Standard with low area requirements and Group-Key support is presented. The designed co-processor allows securing wireless sensor networks with independence of the communications protocols used. With an area occupancy of only 2101 LUTs over Spartan 6 devices from Xilinx, it requires 15% less area while achieving near 490% better performance when compared to cryptoprocessors with similar features in the literature. [ABSTRACT FROM AUTHOR]

Security management for IoT applications is a critical research field, especially when taking into account the performance variation over the very different IoT devices. In this paper, we present high-performance client/server coordinators on low-cost SoC-FPGA devices for secure IoT data collection. Security is ensured by using the Transport Layer Security (TLS) protocol based on the TLS_ECDHE_ECDSA_WITH_AES_128_CBC_SHA256 cipher suite. The hardware architecture of the proposed coordinators is based on SW/HW co-design, implementing within the hardware accelerator core Elliptic Curve Scalar Multiplication (ECSM), which is the core operation of Elliptic Curve Cryptosystems (ECC). Meanwhile, the control of the overall TLS scheme is performed in software by an ARM Cortex-A9 microprocessor. In fact, the implementation of the ECC accelerator core around an ARM microprocessor allows not only the improvement of ECSM execution but also the performance enhancement of the overall cryptosystem. The integration of the ARM processor enables to exploit the possibility of embedded Linux features for high system flexibility. As a result, the proposed ECC accelerator requires limited area, with only 3395 LUTs on the Zynq device used to perform high-speed, 233-bit ECSMs in 413 µs, with a 50 MHz clock. Moreover, the generation of a 384-bit TLS handshake secret key between client and server coordinators requires 67.5 ms on a low cost Zynq 7Z007S device. [ABSTRACT FROM AUTHOR]

Wearable monitoring devices are now a usual commodity in the market, especially for the monitoring of sports and physical activity. However, specialized wearable devices remain an open field for high-risk professionals, such as military personnel, fire and rescue, law enforcement, etc. In this work, a prototype wearable instrument, based on reconfigurable technologies and capable of monitoring electrocardiogram, oxygen saturation, and motion, is presented. This reconfigurable device allows a wide range of applications in conjunction with mobile devices. As a proof-of-concept, the reconfigurable instrument was been integrated into ad hoc glasses, in order to illustrate the non-invasive monitoring of the user. The performance of the presented prototype was validated against a commercial pulse oximeter, while several alternatives for QRS-complex detection were tested. For this type of scenario, clustering-based classification was found to be a very robust option. [ABSTRACT FROM AUTHOR]

Different types of fill-level measurement systems exist in the market, but most of them imply some type of intrusion in the tank itself. In this paper, a reconfigurable system based on sound resonance for measuring the fill-level of a tank from the exterior is presented. A relation between sound resonance frequencies and the content of the tank has been found, especially as the tank gets closer to being full. A prototype has been created using reconfigurable technologies combined with wireless communications in order to control the system from an ad hoc application. With this prototype, the fill-level of different tanks has been measured with good resolution, especially when the tank is over half of its capacity. [ABSTRACT FROM AUTHOR]