Search

Representative weather data are fundamental to characterizing a place and determining ideal design approaches. This is particularly important for large countries like Brazil, whose extension and geographical position contribute to defining diverse climatic conditions along the territory. In this context, this study intends to characterize the Brazilian territory based on a 15-year weather record (2008–2022), providing a climatic assessment based on a climatic and bioclimatic profile for the whole country. The climate analysis was focused on temperature, humidity, precipitation, and solar radiation, followed by a bioclimatic analysis guided by the Givoni chart and the natural ventilation potential assessment. In both situations, the results were analyzed using three resolutions: country-level, administrative division, and bioclimatic zones. This study also identified representative locations for the Brazilian bioclimatic zones for a building-centered analysis based on the thermal and energy performance of a single-family house with different envelope configurations. The results proved that most Brazilian territories increased above 0.4 °C in the dry bulb temperature and reduced relative humidity. The precipitation had the highest reduction, reaching more than 50% for some locations. The warmer and drier conditions impacted also the Köppen–Geiger classification, with an increase in the number of Semi-Arid and Arid locations. The bioclimatic study showed that ventilation is the primary strategy for the Brazilian territory, as confirmed by the natural ventilation potential results, followed by passive heating strategies during the year's coldest months. Finally, building performance simulation underlined that, in colder climates, indoor thermal comfort conditions and air-conditioning demands are less affected by solar absorptance for constructions with low U-values, while in warmer climates, low solar absorptance with intermediary U-values is recommended. [ABSTRACT FROM AUTHOR]

In hot and arid environments, courtyards are essential architectural elements that significantly contribute to microclimate regulation and enhanced thermal comfort. Beyond providing protection against environmental severities, these spaces elevate the standards of livability and sustainability in urban design. The traditional landscape of Mardin, Turkey, exemplifying such challenges, takes center stage in this study, where courtyards hold a prominent role in architectural composition. Facilitated by the ENVI-met software, the evaluation process herein comprehensively analyzes four representative courtyard case studies in Mardin. Key parameters, including air temperature, humidity, predicted mean vote (PMV), and wind speed, are considered to gain a nuanced understanding of their thermal dynamics. The initial evaluation of existing conditions reveals varying thermal comfort levels, with higher PMV values indicating discomfort in the courtyards, underscoring the need for interventions to enhance their microclimate regulation and resilience to climate change challenges. This study aims to enhance our comprehension of the relationship between courtyards and microclimate regulation, particularly in hot–dry regions. By examining the design principles and passive strategies of courtyards, this research identifies effective approaches for optimizing courtyard design, aiming to create sustainable and comfortable living environments. [ABSTRACT FROM AUTHOR]

Vernacular architecture constitutes a rich source of information and ancestral knowledge and could become a key resource for sustainable development. Its passive design strategies effectively respond to local climatic and weather conditions, using locally sourced materials for the construction of its supporting structures and enveloping elements, as well as spatial organization and the incorporation of a buffer area (courtyard) that optimize the use of renewable resources. This qualitative study analyzes a traditional housing typology with a central courtyard located in the Historic Center of Azogues, Ecuador. In situ monitoring was conducted to evaluate the case study's interior thermal comfort in different building spaces. Using the open-source software Open Studio and EnergyPlus, a simulation model was built to assess the annual thermal performance of the house. Field records were used to verify the effectiveness of the strategies that responded to the location's climatic conditions. The analysis of the passive strategies used in the selected house included natural ventilation, solar protection, and thermal insulation, which depended on various aspects of the building, such as its location, the internal space's arrangement, and the design of openings (doors and windows), among others. The thermal simulations revealed that the traditional house located in the Historic Center of Azogues was well adapted to the local climate, although the interior thermal comfort was not entirely satisfactory. [ABSTRACT FROM AUTHOR]

Child Development Centers (CDCs) in Thailand are developed from the same national standard building plan across the country. Due to hot weather conditions, low-cost building materials, and a failure to consider the specific surrounding conditions of each case, thermal discomfort results. This study focuses on an improvement in the thermal comfort of a pilot CDC building in Maha Sarakham province, Thailand. Three CIBSE TM52 model criteria were applied to assess the level of overheating in the CDC building. The IESVE simulation tool was employed to assess the improvement from using passive design strategies (such as orientation, solar protection, thermal insulation, and ventilation). The results showed that passive design strategies could improve the overall thermal comfort of the CDC building. Thermal insulation, especially roof insulation, was the key element in reducing overheating in the building. A fully insulated building with shading devices and a night-time only window-opening pattern could meet the three targeted overheating criteria. Although the limitations of using the CIBSE TM52 model in hot and humid regions have been identified, these findings can be used as an exemplar of passive design strategy integration for other CDC buildings across the country. [ABSTRACT FROM AUTHOR]

The study presented in this paper assessed the multidisciplinary approach of geothermal potential in the area of the most southeastern part of the Pannonian basin, focused on resources utilization. This study aims to present a method for the cascade use of geothermal energy as a source of thermal energy for space heating and cooling and as a resource for balneological purposes. Two particular sites were selected—one in a natural environment; the other within a small settlement. Geothermal resources come from different types of reservoirs having different temperatures and chemical compositions. At the first site, a geothermal spring with a temperature of 20.5 °C is considered for heat pump utilization, while at the second site, a geothermal well with a temperature of 54 °C is suitable for direct use. The calculated thermal power, which can be obtained from geothermal energy is in the range of 300 to 950 kW. The development concept was proposed with an architectural design to enable sustainable energy efficient development of wellness and spa/medical facilities that can be supported by local authorities. The resulting energy heating needs for different scenarios were 16–105 kW, which can be met in full by the use of geothermal energy. [ABSTRACT FROM AUTHOR]

High energy consumption as a result of an inefficient design has both economic and environmental repercussions throughout the life cycle of a building. In Mexico, the residential sector is the third-largest final energy consumer, therefore improving the performance of existing buildings is considered an effective method in achieving energy savings. Moreover, in Mexico warm climate regions predominate, which impacts energy consumption. This article examines a linked, single-family house located in the hot-humid climate city of Villahermosa, Tabasco (México). DesignBuilder software was used to conduct the thermal energy performance simulation of the existing building (base case) and to evaluate the energy-saving potentials by implementing different passive design strategies. As a result, the annual electricity consumption of the base case decreased a maximum of 2.0% with the passive design strategy in exterior windows, 4.9% in walls and, 13.7% reduction in roofs, the latter being the enclosure with the greatest reduction achieved. Nevertheless, a final adaptation proposal with the passive design strategies, whose results represented the highest energy savings, accomplished a total reduction of 23.5% with a payback period of 5.8 years. [ABSTRACT FROM AUTHOR]

Today, the main issue of providing adequate and affordable housing is to go beyond the mere offer of basic shelters, intending to create sustainable and durable settlements. Due to the fragile and uncertain nature of its social, political and economic context, characterized by the lack of common shared legislative references and business strategies in the housing sector, Somalia is a challenging reality to be explored and improved. This paper describes the outcomes of the BECOMe project, intending to propose sustainable solutions for mass-housing design for new sustainable settlements in Mogadishu, involving local entrepreneurs, social organizations and renewable energy. In detail, social, environmental and economic key sustainability requirements (KSRs) for mass-housing are identified first. Then, the most appropriate climate-responsive design and construction technologies at the building level, tailored to the Mogadishu context, are selected; the outcomes are applied to a specific case-study building, assessing energy and cost performances to pave the way for implementation projects in Somalia. [ABSTRACT FROM AUTHOR]

The increasing population density in urban areas simultaneously impacts the trend of energy consumption in building sectors and the urban heat island (UHI) effects of urban infrastructure. Accordingly, passive design strategies to create sustainable buildings play a major role in addressing these issues, while solar envelopes prove to be a relevant concept that specifically considers the environmental performance aspects of a proposed building given their local contexts. As significant advances have been made over the past decades regarding the development and implementation of computational solar envelopes, this study presents a comprehensive review of solar envelopes while specifically taking into account design parameters, digital tools, and the implementation of case studies in various contextual settings. This extensive review is conducted in several stages. First, an investigation of the scope and procedural steps of the review is conducted to frame the boundary of the topic to be analyzed within the conceptual framework of solar envelopes. Second, comparative analyses between categorized design methods in parallel with a database of design parameters are conducted, followed by an in-depth discussion of the criteria for the digital tools and case studies extracted from the selected references. Third, knowledge gaps are identified, and the future development of solar envelopes is discussed to complete the review. This study ultimately provides an inclusive understanding for designers and architects regarding the progressive methods of the development of solar envelopes during the conceptual design stage. [ABSTRACT FROM AUTHOR]

In recent decades, the international scientific debate has focused on maximizing the energy performance of the building organization during the operational phase. However, the energy performance is only partially in line with the strategic environmental objectives defined by the European Commission which, with Communication 2003/302, also defined the guidelines for the drafting of the National Action Plans on Green Public Procurement (NAP GPP). Law no. 296 of 27 December 2006 provided for "... the implementation and monitoring of an Action Plan for the environmental sustainability of public administration consumption", drawn up by the Ministry of the Environment and the Protection of Land and Sea. This work moves in the direction of identifying design strategies, relating to construction and urban restructuring, compatible with the criteria of energy and environmental sustainability provided for in the New Code of Public Procurement (Legislative Decree 50/2016), in accordance with the directives of the European Community. The parameters that define the methodological articulation (choice of case studies, scope of reference of stakeholders, etc.) orient the use of the results towards similar cases, i.e. design of urban districts located in regions with a Mediterranean climate. [ABSTRACT FROM AUTHOR]