Search

In our study, the effect of the use of autofluorescence (Visually Enhanced Lesion Scope—VELscope) on increasing the success rate of surgical treatment in oral squamous carcinoma (OSCC) was investigated. Our hypothesis was tested on a group of 122 patients suffering from OSCC, randomized into a study and a control group enrolled in our study after meeting the inclusion criteria. The preoperative checkup via VELscope, accompanied by the marking of the range of a loss of fluorescence in the study group, was performed before the surgery. We developed a unique mucosal tattoo marking technique for this purpose. The histopathological results after surgical treatment, i.e., the margin status, were then compared. In the study group, we achieved pathological free margin (pFM) in 55 patients, pathological close margin (pCM) in 6 cases, and we encountered no cases of pathological positive margin (pPM) in the mucosal layer. In comparison, the control group results revealed pPM in 7 cases, pCM in 14 cases, and pFM in 40 of all cases in the mucosal layer. This study demonstrated that preoperative autofluorescence assessment of the mucosal surroundings of OSCC increased the ability to achieve pFM resection 4.8 times in terms of lateral margins. [ABSTRACT FROM AUTHOR]

The lignicolous saprotrophic genus Entonaema contains six formally accepted species: E. liquescens (type species), E. cinnabarinum, E. globosum, E. dengii, E. moluccanum, and E. siamensis. Its stromatic ascomata develop on the surface of dead wood remnants; they are rather large, globose to irregularly shaped, and vividly coloured. The fresh stroma interior is filled with a liquid matter. In early studies, the genus was considered to have a preference for tropical habitats, while in more recent field research, numerous collections have been added from warm, temperate areas of Europe, North America, and Asia. Our taxonomic and phylogenetic studies were based on freshly collected E. cinnabarinum from Croatia and E. liquescens from the USA. A phylogenetic study of the sequence alignment of four concatenated gene regions (ITS, LSU, rpb2, and β-tub) revealed the true taxonomic position of Entonaema within Hypoxylaceae (Xylariales), a sister to Hypoxylon carneum. Detailed macroscopic and microscopic descriptions of E. cinnabarinum are accompanied by drawings and colour photographs, while the study of E. liquescens is focused on stromatal microchemical reaction. With new information, the worldwide identification key to the putative species of Entonaema is proposed. Ecological data and biogeographical patterns were studied using all available and reliable sources of recorded data. Climatic preferences of the two most widespread Entonaema species, E. liquescens and E. cinnabarinum, are discussed in detail. [ABSTRACT FROM AUTHOR]

This article presents woven carbon-fiber-reinforced polymer (CFRP) tubular mesh used as a reinforcement on the inner surface of hollow beams made of high-performance concrete (HPC). The tubular mesh was designed to serve as both the tensile and shear reinforcement of hollow beams intended for the construction of small self-supporting structures that could be assembled without mechanization. The reinforcement was prepared with a tri-axial weaving machine from carbon filament yarn and was homogenized using epoxy resin. The interaction of the composite reinforcement with the cementitious matrix was investigated, and the surface of the reinforcement was modified using silica sand and polyvinyl alcohol (PVA) fibers to improve cohesion. The sand coating enhanced bond strength, resulting in the significantly higher flexural strength of the hollow beam of 128%. The PVA fibers had a lower positive effect of 64% on the flexural strength but improved the ductility of the beam. Individual beams were connected by gluing steel parts directly inside the hollow core of the HPC beam. This procedure provides good interaction between the CFRP reinforcement and the glued steel insert and allows for the fast and simple assembly of structures. The weaving of additional layers of the CFRP reinforcement around HPC beams was also explored. A small structure made of the hollow HPC beams with inner composite reinforcement was constructed to demonstrate the possibilities of the presented technology. [ABSTRACT FROM AUTHOR]

Seventeen collections of the genus Parasola from Croatia were studied with integrative taxonomic methods. Parasola papillatospora is described as a new species, based on morphology and multigene phylogenetic analyses. Its basidiomata were growing on soil in temperate deciduous forests (Quercus petraea, Fagus sylvatica, and Carpinus betulus) on two different localities in NW Croatia. Based on publicly available molecular data, the species is also recorded in Hungary. The most distinctive morphological features of the new species are the characteristics of its basidiospores, (1) the papillate apex and (2) central germ pore (both present in most spores), as well as (3) a highly variable shape. A morphological description of P. papillatospora is accompanied by colour photographs of basidiomata, basidiospores, and cystidia. In this study, a total of 64 DNA sequences from 17 specimens belonging to 10 Parasola species were newly generated. As a result of Bayesian Inference and Maximum Likelihood phylogenetic analyses of the concatenated ITS, LSU, tef-1α, and β-tub gene alignment of Parasola species, P. papillatospora was resolved as an independent clade, a sister to the clade comprising the P. plicatilis species complex. Eight Parasola species (P. auricoma, P. crataegi, P. cuniculorum, P. kuehneri, P. malakandensis, P. megasperma, P. nudiceps, P. plicatilis-similis) are reported for the first time for Croatia and P. malakandensis also for Europe. Colour photographs of basidiomata are provided for all Parasola species new to Croatia except P. kuehneri. [ABSTRACT FROM AUTHOR]

Integrative taxonomic studies of macrofungal diversity in the Brijuni National Park (Istria County, Croatia) led to the discovery of a second species of Inocybe (Agaricales, Inocybaceae) new to science. Inocybe istriaca sp. nov. is described on the basis of morphological, ecological, and multigene phylogenetic analyses, and its placement within the family Inocybaceae is discussed. The combination of most important morphological characters that distinguish I. istriaca from the other similar Inocybe species are smooth, (sub)amygdaliform, (sub)phaseoliform, or ellipsoid basidiospores (ca. 8.5–12 × 5–7 μm), large basidia (36–45 × 9–15 μm), mostly (sub)fusiform and weakly thick-walled (up to 1.5 μm) metuloid pleurocystidia, and lamellar edge and stipe apex partially covered by a dark resinous substance. The species was collected on the edge of grassland and Mediterranean evergreen holm oak (Quercus ilex) forest. In this study, a total of 14 DNA sequences from four Inocybe species were generated. Two-gene (ITS, LSU) and four-gene (ITS, LSU, rpb2, tef1) phylogenetic analyses confirmed the status of I. istriaca as an independent species. [ABSTRACT FROM AUTHOR]

About a century after the first finding in northern Vietnam (1908), Coprinus leucostictus is rediscovered on 12 localities in southern India and southern to southeastern China, growing in evergreen subtropical or tropical forests. It is morphologically a rather unique species with coprinoid basidiomata, strongly branched and diverticulate veil hyphae, and a hymeniderm pileipellis. The BLAST search of ITS and tef-1α sequences showed its close relationship to Hausknechtia floriformis, which is not clear based on morphological characters. Multigene phylogenetic analysis of a concatenated dataset of ITS, LSU, tef-1α, and β-tubulin sequences, revealed C. leucostictus and H. floriformis as separate, but sister species. Molecular phylogenetic relationships within the family Psathyrellaceae (including 17 genera) are presented in the phylogram. The genera Hausknechtia and Candolleomyces formed two well-supported lineages and were recovered as a monophyletic group. A total of 27 sequences from the genus Hausknechtia were newly generated in this study. Coprinus leucostictus is combined as Hausknechtia leucosticta, its epitype is designated, and the hitherto monotypic genus Hausknechtia is emended. A detailed morphological description of H. leucosticta supplemented with colour photographs and line drawings is provided. [ABSTRACT FROM AUTHOR]

Titanium dioxide (TiO2) is used as a UV light absorber to protect wood matter from photodegradation. In this paper, interactions between wood and TiO2 coating are studied, and the efficiency of the coating is evaluated. For the experiments, two wood species were chosen: beech (Fagus sylvatica) and pine (Pinus sylvestris). Molecular and physical modifications in coated and uncoated wood exposed to UV radiation were investigated with Fourier transform infrared spectroscopy with attenuated total reflectance (FTIR-ATR) and transmission electron microscopy (TEM). UV-VIS spectroscopy was used to describe the absorption of UV light by the TiO2 planar particles chosen for the experiment. It was demonstrated that TiO2 coating protects wood against photodegradation to a limited extent. TEM micrographs showed fissures in the wood matter around clusters of TiO2 particles in beech wood. [ABSTRACT FROM AUTHOR]

A new ectomycorrhizal species was discovered during the first survey of fungal diversity at Brijuni National Park (Croatia), which consists of 14 islands and islets. The National Park is located in the Mediterranean Biogeographical Region, a prominent climate change hot-spot. Inocybe brijunica sp. nov., from sect. Hysterices (Agaricales, Inocybaceae), is described based on morphology and multilocus phylogenetic data. The holotype collection was found at the edge between grassland and Quercus ilex forest with a few planted Pinus pinea trees, on Veli Brijun Island, the largest island of the archipelago. It is easily recognized by a conspicuous orange to orange–red–brown membranaceous surface layer located at or just above the basal part of the stipe. Other distinctive features of I. brijunica are the medium brown, radially fibrillose to rimose pileus; pale to medium brown stipe with fugacious cortina; relatively small, amygdaliform to phaseoliform, and smooth basidiospores, measuring ca. 6.5–9 × 4–5.5 µm; thick-walled, utriform, lageniform or fusiform pleurocystidia (lamprocystidia) with crystals and mostly not yellowing in alkaline solutions; cheilocystidia of two types (lamprocystidia and leptocystidia); and the presence of abundant caulocystidia only in the upper 2–3 mm of the stipe. Phylogenetic reconstruction of a concatenated dataset of the internal transcribed spacer region (ITS), the nuclear 28S rRNA gene (nrLSU), and the second largest subunit of RNA polymerase II (rpb2) resolved I. brijunica and I. glabripes as sister species. [ABSTRACT FROM AUTHOR]