Search

A series of novel renewable copolymers based on poly(ethylene succinate) (PESu) and poly(isosorbide succinate) (PISSu), with the Isosorbide (Is)/PESu molar ratio varying from 5/95 to 75/25, were synthesized in-situ and studied in this work. A sum of characterization techniques was employed here for the structural and thermo-dynamical characterization. The sophisticated technique of dielectric spectroscopy, along with proper analysis, enabled the molecular dynamics mapping of both the local and segmental types, which is presented for such materials for the first time. With increasing the Is fraction, shorter copolymeric entities were gradually formed. Based on the overall findings, the systems were found to be homogeneous, e.g., exhibiting single glass transitions, with the two polymer segments being found to be excellently distributed. The latter is indirect, although strong, evidence for the successful copolymerization. The thermal degradation mechanism for the copolymers was exhaustingly explored employing analytical pyrolysis. The systems exhibited, in general, good thermal stability, according to the thermogravimetric analysis. Confirming one of the initial scopes for the present systems, isosorbide plays here the role of hardener (PISSu) over the soft polymer (PESu), and this is reflected in the monotonic increase of the glass transition temperature, Tg, from −16 to ~56 °C. The introduction of Is results in an increase in constraints (hardening of the matrix), while there seems to be an overall densification of the polymer (decrease of the free volume). [ABSTRACT FROM AUTHOR]

The continuous depletion of natural resources coupled with plastics pollution, has prompted the scientific community to explore alternative biobased and/or biodegradable polymers. Poly(ethylene succinate) (PESu) is a promising substitute due to its high processability and controllable biodegradation rate. Meanwhile, hemp possesses interesting properties such as being lightweight, exhibiting excellent long-term mechanical stability, and having low carbon emissions, making it an ideal option for wood replacement. Thus, PESu/hemp fiber composites (with and without compatibilizer) were prepared novel sustainable materials with improved properties. The present study aims to investigate the thermal degradation of PESu/hemp fiber composites. More specifically, thermogravimetric analysis (TGA) and pyrolysis-gas chromatography/mass spectrometry (Py–GC/MS) were employed to examine the degradation mechanism and identify decomposition products. The isoconversional methods of Vyazovkin and Friedman, as well as the model free methods, provided comparable results. Samples without compatibilizer were characterized by a two-step Cn autocatalytic mechanism, while those with compatibilizer showed a triple Cn mechanism. The main thermal degradation pathway of the composites was the β-hydrogen scission of the polymeric backbone. In conclusion, this study provides information about the thermal behavior of PESu/hemp fiber composites useful for their application as alternative "wood plastic composites (WPCs)". [ABSTRACT FROM AUTHOR]

Poly(ethylene succinate) (PES), poly(butylene succinate) (PBS), and poly(hexylene succinate) (PHS), were synthesized using succinic acid and different dihydric alcohols as materials. Enzymatic degradability by cutinase of the three kinds of polyesters was studied, as well as their solid-state properties. The biodegradation behavior relied heavily on the distance between ester groups, crystallinity, and the hydrophilicity-hydrophobicity balance of polyester surfaces. The weight loss through degradation of the three kinds of polyesters with different hydroxyl monomers took place in the order PHS > PBS > PES. The degradation behavior of the polyesters before and after degradation was analyzed by scanning electron microscopy, differential scanning calorimetry, powder X-ray diffraction, Fourier transform infrared spectroscopy, gel permeation chromatography, and thermogravimetric analysis. The decrease in relative intensity at 1800-1650 estedpolyesters were degraded simultaneously. The frequencies of the crystalline and amorphous bands were almost identical before and after degradation. Thus, enzymatic degradation did not change the crystalline structure but destroyed it, and the degree of crystallinity markedly decreased. The molecular weight and polydispersity index only changed slightly. The thermal stability of the three kinds of polyesters decreased during enzymatic degradation. [ABSTRACT FROM AUTHOR]

In this study, a thorough study of the crystallization behaviors of the biodegradable polymer composites of poly(ethylene succinate) (PESu) and hexagonal boron nitride (h-BN) was carried out. We found that h-BN had a significant nucleation effect on crystallization behaviors. DSC isothermal crystallization results demonstrated that the crystallization time of the PESu/h-BN composites became shorter after adding h-BN. The rate constant k values calculated from the Avrami equation were larger for the composites, demonstrating that PESu's crystallization rate was increased by adding h-BN. TEM and SEM images showed the well-dispersed h-BN in the PESu matrix. Optical microscopy revealed that the PESu/h-BN composites formed more and smaller spherulites than neat PESu did, which confirmed that h-BN caused the nucleation effect. H-BN also accelerated non-isothermal crystallization kinetics. We discussed the behaviors of the Mo model, which demonstrated that h-BN promoted the kinetics of non-isothermal crystallization. The XRD diffraction patterns showed that h-BN in the composites would not obviously change the crystalline structure of PESu. [ABSTRACT FROM AUTHOR]

Poly(ethylene succinate) (PES) is one of the most promising biodegradable and biocompatible polyesters and is widely used in different biomedical applications. However, little information is available on its solubility and precipitation properties, despite that these solution behavior properties affect its applicability. In order to systematically study these effects, biodegradable and biocompatible poly(ethylene succinate) (PES) was synthesized using ethylene glycol and succinic acid monomers with an equimolar ratio. Despite the optimized reaction temperature (T = 185 °C) of the direct condensation polymerization, relatively low molecular mass values were achieved without using a catalyst, and the Mn was adjustable with the reaction time (40–100 min) in the range of ~850 and ~1300 Da. The obtained crude products were purified by precipitation from THF ("good" solvent) with excess of methanol ("bad" solvent). The solvents for PES oligomers purification were chosen according to the calculated values of solubility parameters by different approaches (Fedors, Hoy and Hoftyzer-van Krevelen). The theta-solvent composition of the PES solution was 0.3 v/v% water and 0.7 v/v% DMSO in this binary mixture. These measurements were also allowed to determine important parameters such as the coefficients A (=0.67) and B (=3.69 × 104) from the Schulz equation, or the Kη (=8.22 × 10−2) and α (=0.52) constants from the Kuhn–Mark–Houwink equation. Hopefully, the prepared PES with different molecular weights is a promising candidate for biomedical applications and the reported data and constants are useful for other researchers who work with this promising polyester. [ABSTRACT FROM AUTHOR]