Search

Photosynthetic active radiation (PAR) refers to photons between 400 and 700 nm. These photons drive photosynthesis, providing carbohydrates for plant metabolism and development. Far-red radiation (FR, 701–750 nm) is excluded in this definition because no FR is absorbed by the plant photosynthetic pigments. However, including FR in the light spectrum provides substantial benefits for biomass production and resource-use efficiency. We investigated the effects of continuous FR addition and end-of-day additional FR to a broad white light spectrum (BW) on carbohydrate concentrations in the top and bottom leaves of sweet basil (Ocimum basilicum L.), a species that produces the raffinose family oligosaccharides raffinose and stachyose and preferentially uses the latter as transport sugar. Glucose, fructose, sucrose, raffinose, and starch concentrations increased significantly in top and bottom leaves with the addition of FR light. The increased carbohydrate pools under FR light treatments are associated with more efficient stachyose production and potentially improved phloem loading through increased sucrose homeostasis in intermediary cells. The combination of a high biomass yield, increased resource-use efficiency, and increased carbohydrate concentration in leaves in response to the addition of FR light offers opportunities for commercial plant production in controlled growth environments. [ABSTRACT FROM AUTHOR]

Eggshell strength is a critical quality factor for consumption eggs as it affects the probability of breakage in practice. In this study, a fast and low-cost methodology for the non-destructive determination of eggshell strength is presented. The method utilized a small steel ball to impact the egg and a microphone to analyse the impact characteristics. Hertz contact theory was applied to relate the measured impact characteristics to the local stiffness of the eggshell. Therefore, a total of 150 eggs were studied on which eight consecutive measurements per egg were taken around the equator at equidistant places. The results showed a strong correlation of 0.93 between the traditional static stiffness measured during quasi-static compression tests and the average stiffness obtained from the new methodology. This paves the way towards fast, low-cost and non-destructive in-line shell strength measurements to reduce the number of cracked eggs reaching the consumer. [ABSTRACT FROM AUTHOR]

In the egg industry, fast and highly reliable quality measurements are crucial. This study presents a novel method based on Hertz contact theory that allows for non-destructive determination of eggshell strength. The goal of the study was to evaluate the material strength (Young's Modulus) and structural strength (stiffness) of eggshells. To this end, an experimental setup was constructed to measure the collision of an eggshell with a small steel ball, which was recorded using a laser vibrometer. The study analyzed a sample of 120 eggs and found a correlation of 0.85 between the traditional static stiffness measured during quasi-static compression tests and the stiffness obtained from the Hertz contact theory. The results show that Hertz contact theory is valid for small steel spheres impacting eggshells, while a sensitivity analysis indicated that the most important factor in determining the strength of the eggshell is the contact duration between the egg and the impactor. These results open up the possibility of grading eggs based on their shell strength in a non-destructive manner. [ABSTRACT FROM AUTHOR]

Most automatic lameness detection system prototypes have not yet been commercialized, and are hence not yet adopted in practice. Therefore, the objective of this study was to simulate the effect of detection performance (percentage missed lame cows and percentage false alarms) and system cost on the potential market share of three automatic lameness detection systems relative to visual detection: a system attached to the cow, a walkover system, and a camera system. Simulations were done using a utility model derived from survey responses obtained from dairy farmers in Flanders, Belgium. Overall, systems attached to the cow had the largest market potential, but were still not competitive with visual detection. Increasing the detection performance or lowering the system cost led to higher market shares for automatic systems at the expense of visual detection. The willingness to pay for extra performance was €2.57 per % less missed lame cows, €1.65 per % less false alerts, and €12.7 for lame leg indication, respectively. The presented results could be exploited by system designers to determine the effect of adjustments to the technology on a system's potential adoption rate. [ABSTRACT FROM AUTHOR]

Due to its detrimental effect on cow welfare, health and production, lameness in dairy cows has received quite a lot of attention in the last few decades-not only in terms of prevention and treatment of lameness but also in terms of detection, as early treatment might decrease the number of severely lame cows in the herds as well as decrease the direct and indirect costs associated with lameness cases. Generally, lame cows are detected by the herdsman, hoof trimmer or veterinarian based on abnormal locomotion, abnormal behavior or the presence of hoof lesions during routine trimming. In the scientific literature, several guidelines are proposed to detect lame cows based on visual interpretation of the locomotion of individual cows (i.e., locomotion scoring systems). Researchers and the industry have focused on automating such observations to support the farmer in finding the lame cows in their herds, but until now, such automated systems have rarely been used in commercial herds. This review starts with the description of normal locomotion of cows in order to define 'abnormal' locomotion caused by lameness. Cow locomotion (gait and posture) and behavioral features that change when a cow becomes lame are described and linked to the existing visual scoring systems. In addition, the lack of information of normal cow gait and a clear description of 'abnormal' gait are discussed. Finally, the different set-ups used during locomotion scoring and their influence on the resulting locomotion scores are evaluated. [ABSTRACT FROM AUTHOR]

Despite the research on opportunities toautomatically measure lameness in cattle, lameness detection systems are notwidely available commercially and are only used on a few dairy farms. However, farmers need to be aware of the lame cows in their herds in order treat themproperly and in a timely fashion. Many papers have focused on the automatedmeasurement of gait or behavioral cow characteristics related to lameness. Inorder for such automated measurements to be used in a detection system, algorithms to distinguish between non-lame and mildly or severely lame cowsneed to be developed and validated. Few studies have reached this latter stageof the development process. Also, comparison between the different approachesis impeded by the wide range of practical settings used to measure the gait or behavioralcharacteristic (e.g., measurements during normal farming routine or duringexperiments; cows guided or walking at their own speed) and by the differentdefinitions of lame cows. In the majority of the publications, mildly lame cowsare included in the non-lame cow group, which limits the possibility of alsodetecting early lameness cases. In this review, studies that used sensortechnology to measure changes in gait or behavior of cows related to lamenessare discussed together with practical considerations when conducting lamenessresearch. In addition, other prerequisites for any lameness detection system onfarms (e.g., need for early detection, real-time measurements) are discussed. [ABSTRACT FROM AUTHOR]

Today, measurement of raw milk quality and composition relies on Fourier transform infrared spectroscopy to monitor and improve dairy production and cow health. However, these laboratory analyzers are bulky, expensive and can only be used by experts. Moreover, the sample logistics and data transfer delay the information on product quality, and the measures taken to optimize the care and feeding of the cattle render them less suitable for real-time monitoring. An on-farm spectrometer with compact size and affordable cost could bring a solution for this discrepancy. This paper evaluates the performance of microelectromechanical system (MEMS)-based near-infrared (NIR) spectrometers as on-farm milk analyzers. These spectrometers use Fabry–Pérot interferometers for wavelength tuning, giving them the advantage of very compact size and affordable price. This study discusses the ability of MEMS spectrometers to reach the accuracy limits set by the International Committee for Animal Recording (ICAR) for at-line analyzers of the milk content regarding fat, protein and lactose. According to the achieved results, the transmission measurements with the NIRONE 2.5 spectrometer perform best, with an acceptable root mean squared error of prediction (RMSEP = 0.21% w/w) for the measurement of milk fat and excellent performance (RMSEP ≤ 0.11% w/w) for protein and lactose. In addition, the transmission measurements using the NIRONE 2.0 module give similar results for fat and lactose (RMSEP of 0.21 and 0.10% w/w respectively), while the prediction of protein is slightly deteriorated (RMSEP = 0.15% w/w). These results show that the MEMS spectrometers can reach sufficient prediction accuracy compared to ICAR standard values for at-line and in-line fat, protein and lactose prediction. [ABSTRACT FROM AUTHOR]

As plants would benefit from adjusting and optimizing their architecture to changing environmental stimuli, ensuring a strong and healthy plant, it was hypothesized that different soil moisture levels would affect xylem and collenchyma development in basil (Ocimum basilicum L. cv. Marian) stems. Four different irrigation set-points (20, 30, 40 and 50% VWC), corresponding respectively to pF values of 1.95, 1.65, 1.30 and 1.15, were applied. Basil plants grown near the theoretical wilting point (pF 2) had a higher xylem vessel frequency and lower mean vessel diameter, promoting water transport under drought conditions. Cultivation at low soil moisture also impacted the formation of collenchyma in the apical stem segments, providing mechanical and structural support to these fast-growing stems and vascular tissues. The proportion of collenchyma area was significantly lower for the pF1.15 treatment (9.25 ± 3.24%) compared to the pF1.95 and pF1.30 treatments (16.04 ± 1.83% and 13.28 ± 1.38%, respectively). Higher fractions of collenchyma resulted in a higher mechanical stem strength against bending. Additionally, tracheids acted as the major support tissues in the basal stem segments. These results confirm that the available soil moisture impacts mechanical stem strength and overall plant quality of basil plants by impacting xylem and collenchyma development during cultivation, ensuring sufficient mechanical support to the fast-growing stem and to the protection of the vascular tissues. To our knowledge, this study is the first to compare the mechanical and anatomical characteristics of plant stems cultivated at different soil moisture levels. [ABSTRACT FROM AUTHOR]

Stomata, the microscopic pores surrounded by a pair of guard cells on the surfaces of leaves and stems, play an essential role in regulating the gas exchange between a plant and the surrounding atmosphere. Stomatal development and opening are significantly influenced by environmental conditions, both in the short and long term. The rapid rate of current climate change has been affecting stomatal responses, as a new balance between photosynthesis and water-use efficiency has to be found. Understanding the mechanisms involved in stomatal regulation and adjustment provides us with new insights into the ability of stomata to process information and evolve over time. In this review, we summarize the recent advances in research on the underlying mechanisms of the interaction between environmental factors and stomatal development and opening. Specific emphasis is placed on the environmental factors including light, CO2 concentration, ambient temperature, and relative humidity, as these factors play a significant role in understanding the impact of global climate change on plant development. [ABSTRACT FROM AUTHOR]

Close remote sensing approaches can be used for high throughput on-field phenotyping in the context of plant breeding and biological research. Data on canopy cover (CC) and canopy height (CH) and their temporal changes throughout the growing season can yield information about crop growth and performance. In the present study, sigmoid models were fitted to multi-temporal CC and CH data obtained using RGB imagery captured with a drone for a broad set of soybean genotypes. The Gompertz and Beta functions were used to fit CC and CH data, respectively. Overall, 90.4% fits for CC and 99.4% fits for CH reached an adjusted R2 > 0.70, demonstrating good performance of the models chosen. Using these growth curves, parameters including maximum absolute growth rate, early vigor, maximum height, and senescence were calculated for a collection of soybean genotypes. This information was also used to estimate seed yield and maturity (R8 stage) (adjusted R2 = 0.51 and 0.82). Combinations of parameter values were tested to identify genotypes with interesting traits. An integrative approach of fitting a curve to a multi-temporal dataset resulted in biologically interpretable parameters that were informative for relevant traits. [ABSTRACT FROM AUTHOR]