Search

To ensure the safe and stable operation of small and medium-sized wind turbine generators within distributed energy systems, a new active pitch adjustment method for a 1.5 kW distributed pitch wind turbine generator is proposed in this article. The stress and displacement responses of blades under uniform inflow and extreme operating gust inflow conditions were calculated and analyzed using a two-way fluid–structure coupling method. The results showed that under the two different flow conditions, as the pitch angle increased, the stress and displacement responses of the wind turbine blades both significantly decreased, and the decrease was greater with increasing wind speed. The feasibility of the proposed variable-pitch adjustment for blade load reduction under different inflow conditions was further illustrated. The peak of the blade stress response was located at the leading-edge position in the middle of the blades (0.55R) for the different inflow conditions, while the displacement response of the blades was mainly along the waving direction. Through comparative analysis of the blade stress and displacement responses at the same wind speed under different flow conditions, it was found that the maximum mean ratio of the blade displacement and stress responses reached 1.66 and 1.67, respectively. [ABSTRACT FROM AUTHOR]

This article proposes and designs a novel variable pitch adjustment device for small wind turbines. The generator spindle is designed to be hollow so that the drive rod passes through it and connects the pitch drive mechanism to the pitch actuator. The article introduces the basic structure and working principle of the pitch mechanism and verifies the feasibility of the pitch device by using 3D printing technology to produce a small-scale model. The stress analysis of the wind turbine was carried out using the unidirectional fluid–structure coupling method. The results show that the maximum equivalent stress of the pitch mechanism is 27.42 MPa, the maximum tooth surface contact stress of the gear is 38.40 MPa, and the maximum tooth root bending stress is 18.13 MPa. The rack synchronous disk, blade handle, and gear rack mechanism were designed with light weight using various optimization schemes. The results of the optimization showed that the overall mass of the pitch mechanism was reduced by 33.2%, improving the applicability of the new pitch mechanism. [ABSTRACT FROM AUTHOR]