Search

Owing to the different quantities and processing times of sub-lots, intermingling sub-lots with each other, instead of fixing the production sequence of sub-lots of a lot as in the existing studies, is a more practical approach to lot-streaming flow shops. Hence, a lot-streaming hybrid flow shop scheduling problem with consistent and intermingled sub-lots (LHFSP-CIS) was studied. A mixed integer linear programming (MILP) model was established, and a heuristic-based adaptive iterated greedy algorithm (HAIG) with three modifications was designed to solve the problem. Specifically, a two-layer encoding method was proposed to decouple the sub-lot-based connection. Two heuristics were embedded in the decoding process to reduce the manufacturing cycle. Based on this, a heuristic-based initialization is proposed to improve the performance of the initial solution; an adaptive local search with four specific neighborhoods and an adaptive strategy has been structured to improve the exploration and exploitation ability. Besides, an acceptance criterion of inferior solutions has been improved to promote global optimization ability. The experiment and the non-parametric Kruskal–Wallis test (p = 0) showed the significant advantages of HAIG in effectiveness and robustness compared with five state-of-the-art algorithms. An industrial case study verifies that intermingling sub-lots is an effective technique to enhance the utilization ratio of machines and shorten the manufacturing cycle. [ABSTRACT FROM AUTHOR]

In 2007, China discovered a hydrothermal anomaly in the Longqi hydrothermal area of the Southwest Indian Ridge. It was the first seabed hydrothermal area discovered in the ultraslow spreading ocean ridge in the world. Understanding the types of seabed sediments in this area is critical for studying the typical topography and geological characteristics of deep-sea seabed hydrothermal areas. The traditional classification of deep-seabed sediments adopts box sampling or gravity column sampling and identifies the types of seabed sediments through laboratory analysis. However, this classification method has some shortcomings, such as the presence of discrete sampling data points and the failure of full-coverage detection. The geological sampling in deep-sea areas is particularly inefficient. Hence, in this study, the EM122 multibeam sonar data collected in the Longqi hydrothermal area, Southwest Indian Ridge, in April 2019 are used to analyze multibeam backscatter intensity. Considering various errors in the complex deep-sea environment, obtaining backscatter intensity data can truly reflect seabed sediment types. Through unsupervised and supervised classification, the seabed sediment classification in the Longqi hydrothermal area was studied. The results showed that the accuracy of supervised classification is higher than that of unsupervised classification. Thus, unsupervised classification is primarily used for roughly classifying sediment types without on-site geological sampling. Combining the genetic algorithm (GA) and the support vector machine (SVM) neural network, deep-sea sediment types, such as deep-sea clay and calcareous ooze, can be identified rapidly and efficiently. Based on comparative analysis results, the classification accuracy of the GA-SVM neural network is higher than that of the SVM neural network, and it can be effectively applied to the high-precision classification and recognition of deep-sea sediments. In this paper, we demonstrate the fine-scale morphology and surface sediment structure characteristics of the deep-sea seafloor by finely processing high-precision deep-sea multibeam backscatter intensity data. This research can provide accurate seabed topography and sediment data for the exploration of deep-sea hydrothermal resources and the assessment of benthic habitats in deep-sea hydrothermal areas. [ABSTRACT FROM AUTHOR]

Steelmaking and the continuous-casting (SCC) scheduling problem is a realistic hybrid flow shop scheduling problem with continuous-casting production at the last stage. This study considers the SCC scheduling problem with diverse products, which is a vital and difficult problem in steel plants. To tackle this problem, this study first presents the mixed-integer linear programming (MILP) model to minimize the objective of makespan. Then, an improved migrating birds optimization algorithm (IMBO) is proposed to tackle this considered NP-hard problem. In the proposed IMBO, several improvements are employed to achieve the proper balance between exploration and exploitation. Specifically, a two-level decoding procedure is designed to achieve feasible solutions; the simulated annealing-based acceptance criterion is employed to ensure the diversity of the population and help the algorithm to escape from being trapped in local optima; a competitive mechanism is developed to emphasize exploitation capacity by searching around the most promising solution space. The computational experiments demonstrate that the proposed IMBO obtains competing performance and it outperforms seven other implemented algorithms in the comparative study. [ABSTRACT FROM AUTHOR]

Disassembly lines are widely utilized to disassemble end-of-life products. Most of the research focuses on the complete disassembly of obsolete products. However, there is a lack of studies on profit and on carbon emission saved. Hence, this study considers the multi-objective partial disassembly line balancing problem with AND/OR precedence relations to optimize profit, saved carbon emission and line balance simultaneously. Firstly, a multi-objective mixed-integer programming model is formulated, which could optimally solve the small number of instances with a single objective. Meanwhile, an improved multi-objective artificial bee colony algorithm is developed to generate a set of high-quality Pareto solutions. This algorithm utilizes two-layer encoding of the task permutation vector and the number of selected parts, and develops two-phase decoding to handle the precedence relation constraint and cycle time constraint. In addition, the modified employed bee phase utilizes the neighborhood operation, and the onlooker phase utilizes the crossover operator to achieve a diverse population. The modified scout phase selects a solution from the Pareto front to replace the abandoned individual to obtain a new high-quality solution. To test the performance of the proposed algorithm, the algorithm is compared with the multi-objective simulated annealing algorithm, the original multi-objective artificial bee colony algorithm and the well-known fast non-dominated genetic algorithm. The comparative study demonstrates that the proposed improvements enhance the performance of the method presented, and the proposed methodology outperforms all the compared algorithms. [ABSTRACT FROM AUTHOR]

The construction of underwater geodetic networks (UGN) is crucial in marine geodesy. To provide high-precision kinematic positioning for underwater submersibles, an underwater acoustic geodetic network configuration of three seafloor base stations, one subsurface buoy, and one sea surface buoy is proposed. The simulation results show that, for a 3 km-deep sea, based on the proposed UGN, the submersible positioning range and positioning accuracy are primarily affected by the size of the seafloor base station array, while the height of the subsurface buoy has a greater impact on the submersible positioning accuracy than the positioning range. Considering current acoustic ranging technology, the kinematic positioning performance of the UGN is optimal when the seafloor base stations are 9~13 km apart and the subsurface buoy is less than 2.5 km above the seafloor, which can achieve a submersible positioning accuracy of less than 30 m within an underwater space of 25 km × 25 km × 3 km. The proposed cost-effective UGN configuration can provide high-precision submersible kinematic positioning performance for seafloor surveying and ocean precision engineering. The impact of the underwater environment on the acoustic transmission characteristics should be further investigated. [ABSTRACT FROM AUTHOR]

In modern manufacturing industry, the methods supporting real-time decision-making are the urgent requirement to response the uncertainty and complexity in intelligent production process. In this paper, a novel closed-loop scheduling framework is proposed to achieve real-time decision making by calling the appropriate data-driven dispatching rules at each rescheduling point. This framework contains four parts: offline training, online decision-making, data base and rules base. In the offline training part, the potential and appropriate dispatching rules with managers' expectations are explored successfully by an improved gene expression program (IGEP) from the historical production data, not just the available or predictable information of the shop floor. In the online decision-making part, the intelligent shop floor will implement the scheduling scheme which is scheduled by the appropriate dispatching rules from rules base and store the production data into the data base. This approach is evaluated in a scenario of the intelligent job shop with random jobs arrival. Numerical experiments demonstrate that the proposed method outperformed the existing well-known single and combination dispatching rules or the discovered dispatching rules via metaheuristic algorithm in term of makespan, total flow time and tardiness. [ABSTRACT FROM AUTHOR]

Shallow-water depth information is essential for ship navigation and fishery farming. However, the accurate acquisition of shallow-water depth has been a challenge for marine mapping. Combining Ice, Cloud, and Land Elevation Satellite-2 (ICESat-2) bathymetry data with multispectral data, satellite-derived bathymetry is a promising solution through which to obtain bathymetric information quickly and accurately. This study proposes a photon refraction correction method considering sea-surface undulations to address errors in the underwater photons obtained by the ICESat-2. First, the instantaneous sea surface and beam emission angle are integrated to determine the sea-surface incidence angle. Next, the distance of photon propagation in water is determined using sea-surface undulation and Snell's law. Finally, position correction is performed through geometric relationships. The corrected photons were combined with the multispectral data for bathymetric inversion, and a bathymetric map of the Yongle Atoll area was obtained. A bathymetric chart was created using the corrected photons and the multispectral data in the Yongle Atoll. Comparing the results of different refraction correction methods with the data measured shows that the refraction correction method proposed in this paper can effectively correct bathymetry errors: the root mean square error is 1.48 m and the R2 is 0.86. [ABSTRACT FROM AUTHOR]

Monitoring of CO2 column concentrations is valuable for atmospheric research. A mobile open-path system was developed based on tunable diode laser absorption spectroscopy (TDLAS) to measure atmospheric CO2 column concentrations. A laser beam was emitted downward from a distributed feedback diode laser at 2 μm and then reflected by the retroreflector array on the ground. We measured the CO2 column concentrations over the 20 and 110 m long vertical path. Several single-point sensors were distributed at different heights to provide comparative measurements for the open-path TDLAS system. The results showed that the minimum detection limit of system was 0.52 ppm. Some similarities were observed in trends from the open-path TDLAS system and these sensors, but the average of these sensors was more consistent with the open-path TDLAS system values than the single-point measurement. These field measurements demonstrate the feasibility of open-path TDLAS for measuring the CO2 column concentration and monitoring carbon emission over large areas. [ABSTRACT FROM AUTHOR]

Calibration/Validation (Cal/Val) of satellite altimeters is fundamental for monitoring onboard sensor performance and ensuring long-term data quality. As altimeter technology has been evolving rapidly from profile to wide swath and interferometric altimetry, different requirements regarding Cal/Val have emerged. Most current Cal/Val technology has been developed for conventional profile altimeters, whereby satellite observations are compared against measurements at one point along orbit lines. However, the application of this type of Cal/Val technique to swath interferometric altimeters with two-dimensional measurements is difficult. Here, we propose a new strategy for the evaluation of interferometric altimeters based on comparison of wave-induced sea surface elevation (WSSE) spectra from one- and two-dimensional measurements. This method assumes that the WSSE variance of an equilibrium wave field is uniform and can be measured equivalently in the space or time domains. The method was first tested with simulated data and then used to evaluate the performance of an airborne interferometric radar altimeter system (AIRAS) using Global Navigation Satellite System (GNSS) buoy measurements. The differences between the WSSE variances from the AIRAS and two GNSS buoys were below 8 cm2, corresponding to a standard deviation of 2.8 cm, which could serve as a reference for the WSSE error over the scale range of waves. The correlation coefficient between the AIRAS and GNSS buoys was approximately 0.90, indicating that the error was small relative to the WSSE signals. In addition, the sea surface height (SSH) difference measured by the AIRAS was compared with that derived from the GNSS buoys at two sites. The results indicated that the error of the SSH difference was 3 cm. This approach represents a possible technique for the Cal/Val of future spaceborne/airborne interferometric altimeters; however, additional experiments and applications are needed to verify the feasibility of this method. [ABSTRACT FROM AUTHOR]