Search

Forest managers need inventory data and information to address sustainability concerns over extended temporal horizons. In situ information is usually derived from field data and computed using appropriate equations. Nonetheless, fieldwork is time-consuming and costly. Thus, new technologies like Light Detection and Ranging (LiDAR) have emerged as an alternative method for forest assessment. In this study, we evaluated the accuracy of geostatistical methods in predicting the Site Index (SI) using LiDAR metrics as auxiliary variables. Since primary variables, which were obtained from forestry inventory data, were used to calculate the SI, secondary variables obtained from LiDAR surveying were considered and multivariate kriging techniques were tested. The ordinary cokriging (CK) method outperformed the simple cokriging (SK) and Inverse Distance Weighted (IDW) methods, which was interpolated using only the primary variable. Aside from having fewer SI sample points, CK was proven to be a trustworthy interpolation method, minimizing interpolation errors due to the highly correlated auxiliary variables, highlighting the significance of the data's spatial structure and autocorrelation in predicting forest stand attributes, such as the SI. CK increased the SI prediction accuracy by 36.6% for eucalyptus, 62% for maritime pine, 72% for pedunculate oak, and 43% for cork oak compared to IDW, outperforming this interpolation approach. Although cokriging modeling is challenging, it is an appealing alternative to non-spatial statistics for improving forest management sustainability since the results are unbiased and trustworthy, making the effort worthwhile when dense secondary variables are available. [ABSTRACT FROM AUTHOR]

Antimony (Sb) has gained significance as a critical raw material (CRM) within the European Union (EU) due to its strategic importance in various industrial sectors, particularly in the textile industry for flame retardants and as a component of Sb-based semiconductor materials. Moreover, Sb is emerging as a potential alternative for anodes used in lithium-ion batteries, a key element in the energy transition. This study explored the feasibility of identifying and quantifying Sb mineralisations through the spectral signature of soils using laboratory reflectance spectroscopy, a non-invasive remote sensing technique, and by employing convolutional neural networks (CNNs). Standard signal pre-processing techniques were applied to the spectral data, and the soils were analysed by inductively coupled plasma mass spectrometry (ICP-MS). Despite achieving high R-squared (0.7) values and an RMSE of 173 ppm for Sb, the study faces a significant challenge of generalisation of the model to new data. Despite the limitations, this study provides valuable insights into potential strategies for future research in this field. [ABSTRACT FROM AUTHOR]

In this work, we present and describe a spectral library (SL) with 15 vascular plant species from Montesinho Natural Park (MNP), a protected area in Northeast Portugal. We selected species from the vascular plants that are characteristic of the habitats in the MNP, based on their prevalence, and also included one invasive species: Alnus glutinosa (L.) Gaertn, Castanea sativa Mill., Cistus ladanifer L., Crataegus monogyna Jacq., Frangula alnus Mill., Fraxinus angustifolia Vahl, Quercus pyrenaica Willd., Quercus rotundifolia Lam., Trifolium repens L., Arbutus unedo L., Dactylis glomerata L., Genista falcata Brot., Cytisus multiflorus (L'Hér.) Sweet, Erica arborea L., and Acacia dealbata Link. We collected spectra (300–2500 nm) from five records per leaf and leaf side, which resulted in 538 spectra compiled in the SL. Additionally, we computed five vegetation indices from spectral data and analysed them to highlight specific characteristics and differences among the sampled species. We detail the data repository information and its organisation for a better understanding of the data and to facilitate its use. The SL structure can add valuable information about the selected plant species in MNP, contributing to conservation purposes. This plant species SL is publicly available in Zenodo platform. [ABSTRACT FROM AUTHOR]

Due to the current energetic transition, new geological exploration technologies are needed to discover mineral deposits containing critical materials such as lithium (Li). The vast majority of European Li deposits are related to Li–Cs–Ta (LCT) pegmatites. A review of the literature indicates that conventional exploration campaigns are dominated by geochemical surveys and related exploration tools. However, other exploration techniques must be evaluated, namely, remote sensing (RS) and geophysics. This work presents the results of the INOVMINERAL4.0 project obtained through alternative approaches to traditional geochemistry that were gathered and integrated into a webGIS application. The specific objectives were to: (i) assess the potential of high-resolution elevation data; (ii) evaluate geophysical methods, particularly radiometry; (iii) establish a methodology for spectral data acquisition and build a spectral library; (iv) compare obtained spectra with Landsat 9 data for pegmatite identification; and (v) implement a user-friendly webGIS platform for data integration and visualization. Radiometric data acquisition using geophysical techniques effectively discriminated pegmatites from host rocks. The developed spectral library provides valuable insights for space-based exploration. Landsat 9 data accurately identified known LCT pegmatite targets compared with Landsat 8. The user-friendly webGIS platform facilitates data integration, visualization, and sharing, supporting potential users in similar exploration approaches. [ABSTRACT FROM AUTHOR]

Optical and thermal remote sensing data have been an important tool in geological exploration for certain deposit types. However, the present economic and technological advances demand the adaptation of the remote sensing data and image processing techniques to the exploration of other raw materials like lithium (Li). A bibliometric analysis, using a systematic review approach, was made to understand the recent interest in the application of remote sensing methods in Li exploration. A review of the application studies and developments in this field was also made. Throughout the paper, the addressed topics include: (i) achievements made in Li exploration using remote sensing methods; (ii) the main weaknesses of the approaches; (iii) how to overcome these difficulties; and (iv) the expected research perspectives. We expect that the number of studies concerning this topic will increase in the near future and that remote sensing will become an integrated and fundamental tool in Li exploration. [ABSTRACT FROM AUTHOR]

The growing importance and demand of lithium (Li) for industrial applications, in particular rechargeable Li-ion batteries, have led to a significant increase in exploration efforts for Li-bearing minerals. To ensure and expand a stable Li supply to the global economy, extensive research and exploration are necessary. Artificial neural networks (ANNs) provide powerful tools for exploration target identification. They can be cost-effectively applied in various geological settings. This article presents an integrated approach of Li exploration targeting using ANNs for data interpretation. Based on medium resolution geological maps (1:50,000) and stream sediment geochemical data (1 sample per 0.25 km2), the Li potential was calculated for an area of approximately 1200 km2 in the surroundings of Bajoca Mine (Northeast Portugal). Extensive knowledge about geological processes leading to Li mineralisation (such as weathering conditions and diverse Li minerals) proved to be a determining factor in the exploration model. Furthermore, Sentinel-2 satellite imagery was used in a separate ANN model to identify potential Li mine sites exposed on the ground surface by analysing the spectral signature of surface reflectance in well-known Li locations. Finally, the results were combined to design a final map of predicted Li mineralisation occurrences in the study area. The proposed approach reveals how remote sensing data in combination with geological and geochemical data can be used for delineating and ranking exploration targets of almost any deposit type. [ABSTRACT FROM AUTHOR]

Reflectance spectroscopy has been used to identify several deposit types. However, applications concerning lithium (Li)-pegmatites are still scarce. Reflectance spectroscopic studies complemented by microscopic and geochemical studies were employed in the Fregeneda–Almendra (Spain–Portugal) pegmatite field to analyze the spectral behavior of Li-minerals and field lithologies. The spectral similarity of the target class (Li-pegmatites) with other elements was also evaluated. Lepidolite was discriminated from other white micas and the remaining Li-minerals. No diagnostic feature of petalite and spodumene was identified, since their spectral curves are dominated by clays. Their presence was corroborated (by complementary techniques) in petalite relics and completely replaced crystals, although the clay-related absorption depths decrease with Li content. This implies that clays can be used as pathfinders only in areas where argillic alteration is not prevalent. All sampled lithologies present similar water and/or hydroxide features. The overall mineral assemblage is very distinct, with lepidolite, cookeite, and orthoclase exclusively identified in Li-pegmatite (being these minerals crucial targets for Li-pegmatite discrimination in real-life applications), while chlorite and biotite can occur in the remaining lithologies. Satellite data can be used to discriminate Li-pegmatites due to distinct reflectance magnitude and mineral assemblages, higher absorptions depths, and distinct Al–OH wavelength position. The potential use of multi- and hyperspectral data was evaluated; the main limitations and advantages were discussed. These new insights on the spectral behavior of Li-minerals and pegmatites may aid in new Li-pegmatite discoveries around the world. [ABSTRACT FROM AUTHOR]

Coal-mining subsidence causes ground fissures and destroys surface structures, which may lead to severe casualties and economic losses. Time series interferometric synthetic aperture radar (TS-InSAR) plays an important role in surface deformation detection and monitoring without the restriction of weather and sunlight conditions. In addition, the probability integral method (PIM) is a surface movement model that is widely used in the field of mining subsidence. In recent years, the integration of TS-InSAR and the PIM has been extensively studied. In this paper, we propose a new method to estimate mining subsidence with the PIM based on TS-InSAR results. This study focuses on the improvement of a boundary constraint and dynamic parameter estimation in the PIM through the inversion of the line-of-sight (LOS) time series deformation derived by TS-InSAR. In addition, 45 Sentinel-1A images from 17 June 2015 to 27 December 2017 of a coal mine in Jiaozuo are utilized to acquire the surface displacement. We apply a time series deformation analysis using small baseline subsets (SBAS) and place the results into an improved PIM to estimate the mining parameters. The simulated mining subsidence is highly consistent with the leveling data, exhibiting an RMSE of 0.0025 m. Compared with the conventional method, the proposed method is more accurate in discovering displacement in mining areas. In the final section of this paper, some sources of error that affect the experiment are discussed. [ABSTRACT FROM AUTHOR]

Machine learning (ML) algorithms have shown great performance in geological remote sensing applications. The study area of this work was the Fregeneda–Almendra region (Spain–Portugal) where the support vector machine (SVM) was employed. Lithium (Li)-pegmatite exploration using satellite data presents some challenges since pegmatites are, by nature, small, narrow bodies. Consequently, the following objectives were defined: (i) train several SVM's on Sentinel-2 images with different parameters to find the optimal model; (ii) assess the impact of imbalanced data; (iii) develop a successful methodological approach to delineate target areas for Li-exploration. Parameter optimization and model evaluation was accomplished by a two-staged grid-search with cross-validation. Several new methodological advances were proposed, including a region of interest (ROI)-based splitting strategy to create the training and test subsets, a semi-automatization of the classification process, and the application of a more innovative and adequate metric score to choose the best model. The proposed methodology obtained good results, identifying known Li-pegmatite occurrences as well as other target areas for Li-exploration. Also, the results showed that the class imbalance had a negative impact on the SVM performance since known Li-pegmatite occurrences were not identified. The potentials and limitations of the methodology proposed are highlighted and its applicability to other case studies is discussed. [ABSTRACT FROM AUTHOR]