Search

A mode-matching formulation is presented and used to analyze the dispersion properties of twist-symmetric transmission lines. The structures are coaxial lines periodically loaded with infinitely thin screens, which are rotated with respect to each other to possess twist symmetry. The results obtained using the proposed formulation are in good agreement with those of commercial simulators. Furthermore, using the presented mode-matching formulation, it is demonstrated that the propagation characteristics in the twist-symmetric structures are linked to the scattering and coupling of the higher order modes. The physical insight offered by this analysis is valuable for the design of various electromagnetic devices, such as filters, antennas, and phase-shifters. [ABSTRACT FROM AUTHOR]

This paper studies wave propagation in a periodic parallel-plate waveguide with equilateral triangular holes. A mode-matching method is implemented to analyze the dispersion diagram of the structure possessing glide and mirror symmetries. Both structures present an unexpected high degree of isotropy, despite the triangle not being symmetric with respect to rotations of 90°. We give some physical insight on the matter by carrying out a modal decomposition of the total field on the hole and identifying the most significant modes. Additionally, we demonstrate that the electrical size of the triangular hole plays a fundamental role in the physical mechanism that causes that isotropic behavior. Finally, we characterize the influence of the different geometrical parameters that conform the unit cell (period, triangle size, hole depth, separation between metallic plates). The glide-symmetric configuration offers higher equivalent refractive indexes and widens the stopband compared to the mirror-symmetric configuration. We show that the stopband is wider as the triangle size is bigger, unlike holey structures composed of circular and elliptical holes where an optimal hole size exists. [ABSTRACT FROM AUTHOR]

This work studies the propagation characteristics of a rectangular waveguide with aligned/misaligned double-sided dielectric-filled metallic corrugations. Two modes are found to propagate in the proposed double-sided configuration below the hollow-waveguide cutoff frequency: a quasi-resonant mode and a backward mode. This is in contrast to the single-sided configuration, which only allows for backward propagation. Moreover, the double-sided configuration can be of interest for waveguide miniaturization on account of the broader band of its backward mode. The width of the stopband between the quasi-resonant and backward modes can be controlled by the misalignment of the top and bottom corrugations, being null for the glide-symmetric case. The previous study is complemented with numerical results showing the impact of the height of the corrugations, as well as the filling dielectric permittivity, on the bandwidth and location of the appearing negative-effective-permeability band. The multi-modal transmission-matrix method has also been employed to estimate the rejection level and material losses in the structure and to determine which port modes are associated with the quasi-resonant and backward modes. Finally, it is shown that glide symmetry can advantageously be used to reduce the dispersion and broadens the operating band of the modes. [ABSTRACT FROM AUTHOR]

We discuss here under which conditions a periodic line with a twist-symmetric shape can be replaced by an equivalent non-twist symmetric structure having the same dispersive behavior. To this aim, we explain the effect of twist symmetry in terms of coupling among adjacent cells through higher-order waveguide modes. We use several waveguide modes to accurately derive the dispersion diagram of a line through a multimodal transmission matrix. With this method, we can calculate both the phase and attenuation constants of Bloch modes, both in shielded and open structures. In addition, we use the higher symmetry of these structures to further reduce the computational cost by restricting the analysis to a subunit cell of the structure instead of the entire unit cell. We confirm the validity of our analysis by comparing our results with those of a commercial software. [ABSTRACT FROM AUTHOR]

In this article, we demonstrate how twist symmetries can be employed in the design of flat lenses. A lens design is proposed, consisting of 13 perforated metallic sheets separated by an air gap. The perforation in the metal is a two-dimensional array of complementary split-ring resonators. In this specific design, the twist symmetry is local, as it is only applied to the unit cell of the array. Moreover, the twist symmetry is an approximation, as it is only applied to part of the unit cell. First, we demonstrate that, by varying the order of twist symmetry, the phase delay experienced by a wave propagating through the array can be accurately controlled. Secondly, a lens is designed by tailoring the unit cells throughout the aperture of the lens in order to obtain the desired phase delay. Simulation and measurement results demonstrate that the lens successfully transforms a spherical wave emanating from the focal point into a plane wave at the opposite side of the lens. The demonstrated concepts find application in future wireless communication networks where fully-metallic directive antennas are desired. [ABSTRACT FROM AUTHOR]

In this study, a bound-constrained optimization algorithm is applied for estimating physiological data (pulse and breathing rate) of human body using 60 GHz Doppler radar, by detecting displacements induced by breathing and the heartbeat of a human subject. The influence of mutual phasing between the two movements is analyzed in a theoretical framework and the application of optimization algorithms is proved to be able to accurately detect both breathing and heartbeat rates, despite intermodulation effects between them. Different optimization procedures are compared and shown to be more robust to receiver noise and artifacts of random body motion than a direct spectrum analysis. In case of a large-scale constrained bound, a parallel optimization procedure executed in subranges is proposed to realize accurate detection in a reduced span of time. [ABSTRACT FROM AUTHOR]