Search

The metal–organic framework (MOF) materials with significant steadiness and a large specific surface area have been popular with supercapacitor material in recent years. However, its application in supercapacitors is restricted due to the low specific capacitance and poor conductivity. Herein, sulfur compounds with a high theoretical specific capacitance and highly conductive titanium nitride (TiN) were introduced into Co-based metal–organic frameworks/nickel foam (Co-MOF/NF) through a two-step hydrothermal technique (nickel sulfide/titanium nitride@ Co-based metal–organic frameworks/nickel foam). In detail, the fabricated nickel sulfide/titanium nitride@Co-based metal–organic frameworks/nickel foam (Ni3S2/TiN@Co-MOF/NF) electrode material exhibits a markedly high specific capacitance (2648.8 F g−1) at 1 A g−1, compared with that (770 F g−1) of the precursor Co-MOF/NF. And its mass specific capacitance is retained 88.3% (8 A g−1) after 5000 cycles. Furthermore, a non-symmetrical supercapacitor (ASC) composed of Ni3S2/TiN@Co-MOF/NF and AC exhibits excellent power density (801.8 W kg−1) and energy density (97.8 W h kg−1). Therefore, Ni3S2/TiN@Co-MOF/NF with excellent electrochemical properties and stability provides new ideas for the development of excellent supercapacitor electrode materials. [ABSTRACT FROM AUTHOR]

In order to realize the effective separation of palladium from high-level liquid waste (HLLW), a ligand-supported adsorbent (NTAamide(C8)/SiO2-P) was prepared by the impregnation method in a vacuum. The SiO2-P carrier was synthesized by in situ polymerization of divinylbenzene and styrene monomers on a macroporous silica skeleton. The NTAamide(C8)/SiO2-P adsorbent was fabricated by impregnating an NTAamide(C8) ligand into the pore of a SiO2-P carrier under a vacuum condition. The adsorption performance of NTAamide(C8)/SiO2-P in nitric acid medium has been systematically studied. In a solution of 0.2 M HNO3, the distribution coefficient of Pd on NTAamide(C8)/SiO2-P was 1848 mL/g with an adsorption percentage of 90.24%. With the concentration of nitric acid increasing, the adsorption capacity of NTAamide(C8)/SiO2-P decreases. Compared to the other 10 potential interfering ions in fission products, NTAamide(C8)/SiO2-P exhibited excellent adsorption selectivity for Pd(II). The separation factor (SFPd/other metals > 77.8) is significantly higher than that of similar materials. The interference of NaNO3 had a negligible effect on the adsorption performance of NTAamide(C8)/SiO2-P, which maintained above 90%. The adsorption kinetics of Pd(II) adsorption on NTAamide(C8)/SiO2-P fits well with the pseudo-second order model. The Sips model is more suitable than the Langmuir and Freundlich model for describing the adsorption behavior. Thermodynamic analysis showed that the adsorption of Pd(II) on NTAamide(C8)/SiO2-P was a spontaneous, endothermic, and rapid process. NTAamide(C8)/SiO2-P also demonstrated good reusability and economic feasibility. [ABSTRACT FROM AUTHOR]

Simple Summary: Research on the Cap protein is highly significant in the diagnosis, prevention, and control of porcine circovirus 3. In this study, we identified a novel B cell epitope of Cap protein using monoclonal antibody, and an epitope-blocking enzyme-linked immunosorbent assay was successfully developed to detect PCV3 antibodies in porcine sera. This established EB-ELISA has the advantages of being rapid, highly sensitive, re-producible, specific, and did not react with other porcine virus sera, which has great potential for the detection of PCV3 antiserum in porcine farms. Porcine circovirus type 3 (PCV3) is endemic in swine worldwide and causes reproductive disorders, dermatitis and nephrotic syndrome, and multi-organ inflammation. Currently, there is a growing need for rapid and accurate diagnostic methods in disease monitoring. In this study, four monoclonal antibodies (mAbs) against PCV3 capsid proteins were prepared (mAbs 2F6, 2G8, 6E2, and 7E3). MAb 7E3, which had the highest binding affinity for the Cap protein, was chosen for further investigation. A novel B cell epitope 110DLDGAW115 was identified using mAb 7E3. An epitope-blocking (EB) enzyme-linked immunosorbent assay (ELISA) was successfully developed using horseradish-peroxidase-labeled mAb 7E3 to detect PCV3 antibodies in porcine sera. Moreover, the EB-ELISA showed no specific reaction with other porcine disease sera, and the cut-off value was defined as 35%. Compared with the commercial ELISA, the percentage agreement was 95.59%. Overall, we have developed a novel EB-ELISA method that accurately and conveniently detects PCV3 in serum, making it a valuable tool for the clinical detection of PCV3 infection. [ABSTRACT FROM AUTHOR]

Agricultural non-point source pollution (ANPSP) is a primary cause of watershed water quality deterioration, and over 50% of NPS pollutants are estimated to come from ANPSP. Based on the "source-sink" theory and minimum cumulative resistance (MCR) model, ANPSP source and key resistance factors were integrated to identify areas at risk of ANPSP production and transportation into the waters of the upper Yangtze River basin. The results showed a spatial difference in the agricultural pollution sources of the basin, which were determined using both ANPSP loads and land-use types. Soil type, rainfall erosivity, and elevation were the three most important resistance factors in pollution transportation, weighting 0.373, 0.241, and 0.147, respectively. There was a spatial effect on the comprehensive resistance of ANPSP transportation, which was lower in mountainous terrain at the central basin. On the coupling of source and resistance processes, regions at serious risk of ANPSP were found to be concentrated in the southwest area. Areas at very high risk of NH3-N and TP pollution accounted for 37.6% and 38.1%, respectively, in the total town/street area. The spatial risk patterns identified in this study could be used for decision making and policy regulation of ANPSP and for aquatic environmental protection. [ABSTRACT FROM AUTHOR]

An easy prepared probe, BHMMP, was designed and synthesized, which displayed a significant fluorescence enhancement (over 38-fold) and obvious color change in the recognition of Al3+. The binding ratio of probe BHMMP to Al3+ was determined as 1:1, according to Job plot. The binding mechanism was fully clarified by the experiments, such as FT-IR spectrum, ESI–MS analysis, and 1H NMR titration. A DFT study further confirmed the binding mode of BHMMP to Al3+. The limit of detection (LOD) for Al3+ was determined as low as 0.70 µM, based on the fluorescence titration of BHMMP. Moreover, the results from real sample experiments, including real water samples, test papers, and cell images, well-demonstrated that BHMMP was capable of sensing Al3+ in environmental and biological systems. [ABSTRACT FROM AUTHOR]

Metal–organic frameworks (MOFs) have a good designability, a well-defined pore, stimulus responsiveness, a high surface area, and a controllable morphology. Up to now, various MOFs have been widely used as nanocarriers and have attracted lots of attention in the field of drug delivery and release because of their good biocompatibility and high-drug-loading capacity. Herein, we provide a comprehensive summary of MOF-based nanocarriers for drug delivery and release over the last five years. Meanwhile, some representative examples are highlighted in detail according to four categories, including the University of Oslo MOFs, Fe-MOFs, cyclodextrin MOFs, and other MOFs. Moreover, the opportunities and challenges of MOF-based smart delivery vehicles are discussed. We hope that this review will be helpful for researchers to understand the recent developments and challenges of MOF-based drug-delivery systems. [ABSTRACT FROM AUTHOR]

The use of tetra-alkylcarbamides as novel ligands: N,N-butyl-N',N'-hexylurea (L1: ABHU), and N,N-butyl-N',N'-pentylurea (L2: ABPU), for the solvent extraction and complexation behaviors of uranium(VI) was synthesized and investigated in this study. The effects of HNO3 and NO3− concentrations in the aqueous phase on the distribution ratio of U(VI) were examined. Under 5 mol/L HNO3 concentration, DU reached 5.02 and 4.94 respectively without third-phase formation. During the extraction, slope measurements and IR spectral analysis revealed that the U(VI) complexes are a form of UO2(NO3)2·2L for both ligands. In addition, thermodynamic studies showed that the uranium extraction reaction was a spontaneous exothermic reaction. The deep structural analysis of the complexes was realized with DFT calculation. The bond length, bond properties, and topology of the complexes were discussed in detail to analyze the extraction behavior. This study enriches the coordination chemistry of U(VI) by tetra-alkylcarbamides, which may offer new clues for the design and synthesis of novel ligands for the separation, enrichment, and recovery of uranium in the nuclear fuel cycle. [ABSTRACT FROM AUTHOR]

To evaluate the prediction model comprised of patients' laboratory results and single-nucleotide polymorphism (SNP) markers of host gene for the clearance of hepatitis B surface antigen (HBsAg) in patients with chronic hepatitis B (CHB) who underwent interferon (IFN)-α therapy, this prospective case–control study enrolled 131 patients with CHB who underwent IFN-α-based regimens in our hospital between January 2015 and September 2019. Among them, 56 cases were without HBsAg clearance, while the other 75 cases had HBsAg clearance. Multivariable logistic regression analysis showed that CYP27B1 rs4646536 (odd ratio [OR] = 0.155, 95% CI: 0.030–0.807, p = 0.027), PAK4 rs9676717 (OR = 11.237, 95% CI: 1.768–71.409, p = 0.010), IL28B rs12979860 (OR = 0.059, 95% CI: 0.006–0.604, p = 0.017), baseline HBsAg (OR = 0.170, 95% CI: 0.040–0.716, p = 0.016), and HBeAg status (OR = 3.971, 95% CI: 1.138–13.859, p = 0.031) were independently associated with HBsAg clearance. The model that included rs3077, rs4646536, rs9676717, rs2850015, rs12979860, baseline HBsAg, HBeAg status, and HBV DNA had the best prediction performance for HBsAg clearance prediction, with AUC = 0.877, 80% sensitivity, and 81% specificity. In conclusion, laboratory results and gene polymorphisms before treatment might have a good predictive value for HbsAg clearance after IFN-α treatment in CHB. [ABSTRACT FROM AUTHOR]

Equal channel angular pressing (ECAP) and multi-axial compression deformation (MAC) are severe plastic deformation (SPD) processes that produce bulk nanostructured materials with ultrafine grains. The grains could be observably refined by multi-pass of ECAP and MAC. This research proposed new routes of cyclic equal channel compression (CECC), which combines ECAP and MAC to increase the mechanical properties of 6061 aluminum alloy. The tests, which are conducted through electron backscattered diffraction (EBSD) and transmission electron microscope (TEM), were performed on the grain size, recrystallization distribution, misorientation distributions, dislocations, and secondary phase distributions of CECC-processed 6061 aluminum alloys on the purpose of exploring the mechanism of grain refinement. MEM is the short form for the CECC processing route of MAC + ECAP + MAC, which is one ECAP pass between two MAC passes. The tests results showed that the average grain size could reach to as much as 1.1 μm after two MEM deformation circles named MEM-MEM, with the non-annealing average grain size being 21 μm and recrystallization annealed average grain size being 28 μm. The dislocation cells, which could be transformed into sub-grains with the increase of the strain, were formed by the slip and the accumulation of dislocations. The secondary phase was Mg2Si, which could prevent the refined grains from growing up again by pinning at the grain boundaries. Above all, the dislocation proliferation and secondary phases will both lead to the grain refinement. [ABSTRACT FROM AUTHOR]

Aggregation-caused quenching (ACQ) effect, known as the main cause to restrain solid-state luminescence of carbon quantum dots (CQDs), hinders further application of CQDs in white light-emitting diodes (WLED). Here, a complex of CQDs and phthalimide crystals (CQDs/PC) was prepared through a one-step solvothermal method. CQDs/PC prevented CQDs from touching directly by embedding the CQDs in phthalimide crystal matrix in situ, which effectively reduced the ACQ effect. Furthermore, CQDs/PC exhibited multi-peak fluorescence spectra that span the green, yellow and orange spectral regions. Finally, a WLED fabricated based on CQDs/PC achieved a color-rendering index of 82 and a correlated color temperature of 5430 K. This work provides a quick and effective strategy to apply CQDs to WLED. [ABSTRACT FROM AUTHOR]