Search

Taopian is a traditional Chinese pastry made from cooked glutinous rice flour. The effects of heat–moisture treatment (110 °C, 4 h; moisture contents 12–36%, w/w) on the preparation of cooked glutinous rice flour and taopian made from it were compared with the traditional method of stir-frying (180 °C, 30 s). The color of heat–moisture-treated (HMT) flours was darker. HMT flours exhibited a larger mean particle size (89.5–124 μm) and a greater relative crystallinity of starch (23.08–42.92%) and mass fractal dimension (1.77–2.28). The flours exhibited water activity in the range of 0.589–0.631. Although the oil-binding capacity of HMT flours was largely comparable to that of stir-fried flours, HMT flours exhibited a lower water absorption index. Accordingly, the taopian produced with HMT flours exhibited a lower brightness, accompanied by a stronger reddening and yellowing. In addition, more firmly bound water was observed in the taopian produced with HMT flour. The taopian made with HMT flour with a moisture content of 24% exhibited moderate hardness, adhesiveness and cohesiveness and received the highest score for overall acceptability (6.80). These results may be helpful to improve the quality of taopian by applying heat–moisture treatment in the preparation of cooked glutinous rice flour. [ABSTRACT FROM AUTHOR]

In this study, we designed two series of novel anthraquinone-based benzenesulfonamide derivatives and their analogues as potential carbonic anhydrase inhibitors (CAIs) and evaluated their inhibitory activities against off-target human carbonic anhydrase II (hCA II) isoform and tumor-associated human carbonic anhydrase IX (hCA IX) isoform. Most of these compounds exhibited good inhibitory activities against hCA II and IX. The compounds that exhibited the best hCA inhibition were further studied against the MDA-MB-231, MCF-7, and HepG2 cell lines under hypoxic and normoxic conditions. Additionally, the compounds exhibiting the best antitumor activity were subjected to apoptosis and mitochondrial membrane potential assays, which revealed a significant increase in the percentage of apoptotic cells and a notable decrease in cell viability. Molecular docking studies were performed to demonstrate the presence of numerous hydrogen bonds and hydrophobic interactions between the compounds and the active site of hCA. Absorption, distribution, metabolism, excretion (ADME) predictions showed that all of the compounds had good pharmacokinetic and physicochemical properties. [ABSTRACT FROM AUTHOR]

Worldwide abatement of untreated sewage discharge into surface water is a challenging task. Sewage discharging into surface waters has a detrimental impact on water quality. This paper presents a MATLAB (R2018b) framework designed to identify sewage flow discharges into rivers from an inverse problem-solving perspective. The computational tool integrates a hydrodynamic model using the Hydrologic Engineering Center's River Analysis System (HEC-RAS 5.0.0) and an open-source toolbox for Differential Evolution Adaptive Metropolis (DREAM) as the inverse problem method. The proposed framework can effectively infer discharge sources in scenarios of highly transient flow based on hydraulic data at pre-set monitoring sites. To validate its capabilities, one hypothetical case and two real cases of sewage flow discharges entering a river were used to test the developed modeling framework. The results based on three performance metrics showed that this mathematical tool can be extended to simulate complex hydrodynamic flow patterns. This accomplishment underscores its potential as a valuable asset for environmental monitoring and water quality restoration efforts. [ABSTRACT FROM AUTHOR]

Perfluorodecanoic acid (PFDA), an enduring and harmful organic pollutant, is widely employed in diverse food-related sectors. Our previous studies have provided evidence that PFDA has the potential to facilitate obesity and hepatic fat accumulation induced by high-fat diet (HFD) intake. Epigallocatechin-3-gallate (EGCG), a polyphenol found in green tea, has been suggested to possess potential preventive effects against metabolic abnormalities and fatty liver. The purpose of this research was to investigate the effects of EGCG on PFDA-exacerbated adiposity and hepatic lipid accumulation in HFD-fed mice. The results showed that EGCG reduced body weight gain; tissue and organ weights; blood glucose, serum insulin, HOMA-IR, leptin, and lipid parameters; serum inflammatory cytokines (IL−1β, IL−18, IL−6, and TNF−α); and hepatic lipid accumulation in PFDA-exposed mice fed an HFD. Further work showed that EGCG improved liver function and glucose homeostasis in mice fed an HFD and co-exposed to PFDA. The elevated hepatic mRNA levels of SREBP-1 and associated lipogenic genes, NLRP3, and caspase−1 in PFDA-exposed mice fed an HFD were significantly decreased by EGCG. Our work provides evidence for the potential anti-obesity effect of EGCG on co-exposure to HFD and PFDA and may call for further research on the bioactivity of EGCG to attenuate the endocrine disruption effects of long-term exposure to pollutants. [ABSTRACT FROM AUTHOR]

With rapid infrastructure development worldwide, the generation of industrial solid waste (ISW) has substantially increased, causing resource wastage and environmental pollution. Meanwhile, tunnel engineering requires large quantities of grouting material for ground treatment and consolidation. Using ISW as a component in tunnel grouts provides a sustainable solution to both issues. This paper presented a comprehensive review of the recent advancements in tunnel grouting materials using ISW, focusing on their feasibility, mechanical characteristics, and future development directions. Initially, the concept and classification of ISW were introduced, examining its feasibility and advantages as grouting materials in tunnels. Subsequently, various performances of ISW in tunnel grouting materials were summarized to explore the factors influencing mechanical strength, fluidity, durability, and microstructure characteristics. Simultaneously, this review analyzed current research trends and outlines future development directions. Major challenges, including quality assurance, environmental risks, and lack of standardized specifications, are discussed. Future research directions, including multifunctional grouts, integrated waste utilization, and advanced characterization techniques, are suggested to further advance this field. These findings provided useful insights for the continued development of high-performance and environmentally friendly ISW-based grouting materials. [ABSTRACT FROM AUTHOR]

We are entering a new epoch characterized by pervasive digitization, where a significant proportion of our daily activities rely on advanced digital and informational technology. Consequently, this study intends to scrutinize the repercussions of digital media and digital financial inclusion on environmentally sustainable growth across 38 selected economies. The research incorporates four distinct empirical analysis techniques: two-stage least squares (2SLS) and the generalized method of moments (GMM). The assessment reveals a meaningful and positive association between digital financial inclusion and green growth per the 2SLS and GMM methodologies. This affirms the notion that digital financial aid fosters ecological sustainability. Conversely, the metrics linked with information and communication technology (ICT) have shown positive significance across all four utilized estimation models. This suggests that an increase in ICT utilization can play a vital role in advancing green growth. In the same vein, the estimated coefficients of research and development initiatives and renewable energy consumption have demonstrated positive significance across all four models. Furthermore, the metrics associated with trade openness have exhibited a positive significance in both the 2SLS and GMM models. Meanwhile, the metric linked with education has displayed a positive significance solely with the GMM technique. Upon evaluation, it can be concluded that digital media, the consumption of renewable energy, and research and development endeavors are principal contributors to green growth. [ABSTRACT FROM AUTHOR]

A successful urban renewal policy, process, and project implementation should advocate sustainable development from economic, social, and environmental perspectives. As different stakeholders have different interests and insights into the importance of the environment, housing, social wellbeing, and economic concerns, they often have different ideas concerning how to develop urban renewal strategies and implement projects. Although previous studies have focused on the opinions of governments and academics, fewer studies have considered the direct beneficiaries of urban renewal—the residents. This study examined the key factors that influence sustainable urban renewal from the perspective of multiple stakeholders, including local governments, residents, developers, and designers. Social network analysis (SNA) and the reliability interval method (RIM) were integrated to form a SNA-RIM analytical framework to analyze the importance of the influencing factors. The results showed that the adjustment of the regional industrial structure, employment opportunities, and environmental qualification improvement had the most significant influence on sustainable urban renewal from economic, social, and environmental perspectives, respectively. In addition, different types of stakeholders do not value sustainability indicators in the same way. Local governments place more emphasis on return on investment, employment opportunities, and environmental qualification improvement, whereas residents focus on per capita income growth rate, public service facilities, and convenience of municipal infrastructure. Developers are most interested in the land value growth rate, public service facilities, and effective land use space, whereas designers attach the greatest importance to the adjustment of regional industrial structure, public service facilities, and effective land use space. Therefore, this study can help urban planners and decision makers balance the interests, seek common benefits for different types of stakeholders, and improve sustainable and inclusive urban renewal. [ABSTRACT FROM AUTHOR]

Exploring the spatial differentiation and driving mechanism of labor flow can effectively promote the flow of urban and rural factors and provide a basis for rural revitalization. This paper used the theory of push and pull for reference to explain the role of push and pull in the process of labor migration. On this basis, the paper analyzed the social space characteristics of labor in Longxi County and explored the impact mechanism of local quality on labor migration. It was found that the characteristics of labor migration in Longxi County had a distance attenuation effect and gravitational effect, and the spatial agglomeration of labor attributes was obvious. This was closely related to local quality differences. The labor migration was conducted under the comprehensive effect of the local quality of the source and destination. The local quality of the source was the basic power of the labor migration. The difference in the local quality between destinations was the main reason for the spatial difference in the number and attributes of the labor force. Specifically, the degree of interconnection and cooperation affected the labor migration distance, and the relatively poor employment income-generating capacity and regional livability in the western underdeveloped regions affected the labor quantity. The young and middle-aged labor force was greatly affected by the regional environment. [ABSTRACT FROM AUTHOR]

Inter-species somatic cell nuclear transfer (iSCNT) is significant in the study of biological problems such as embryonic genome activation and the mitochondrial function of embryos. Here, we used iSCNT as a model to determine whether abnormal embryo genome activation was caused by mitochondrial dysfunction. First, we found the ovine-bovine iSCNT embryos were developmentally blocked at the 8-cell stage. The reactive oxygen species level, mitochondrial membrane potential, and ATP level in ovine-bovine cloned embryos were significantly different from both bovine-bovine and IVF 8-cell stage embryos. RNA sequencing and q-PCR analysis revealed that mitochondrial transport, mitochondrial translational initiation, mitochondrial large ribosomal subunit, and mitochondrial outer membrane genes were abnormally expressed in the ovine-bovine embryos, and the mitochondrial outer membrane and mitochondrial ribosome large subunit genes, mitochondrial fusion gene 1, and ATPase Na+/K+ transporting subunit beta 3 gene were expressed at lower levels in the ovine-bovine cloned embryos. Furthermore, we found that overexpression and knockdown of Mfn1 significantly affected mitochondrial fusion and subsequent biological functions such as production of ATP, mitochondrial membrane potential, reactive oxygen species and gene expressions in cloned embryos. These findings enhance our understanding of the mechanism by which the Mfn1 gene regulates embryonic development and embryonic genome activation events. [ABSTRACT FROM AUTHOR]

The incidence of hyperuricemia has increased globally due to changes in dietary habits. The sacha inchi oil press-cake is generally discarded, resulting in the waste of resources and adverse environmental impact. For the purpose of developing sacha inchi oil press-cake and identifying natural components with anti-hyperuricemic activities, we systemically investigated the underlying mechanisms of sacha inchi oil press-cake protein hydrolysates (SISH) in the hyperuricemic rat model. SISH was obtained from sacha inchi oil press-cake proteins after trypsin treatment, and 24 peptides with small molecular weight (<1000 Da) were identified. The results of animal experiments showed that SISH significantly decreased the serum uric acid (UA) level by inhibiting the xanthine oxidase (XOD) activity and regulating the gene expression related to UA production and catabolism in hyperuricemia rats, such as Xdh and Hsh. In addition, SISH attenuated the renal damage and reduced the gene expression related to inflammation (Tlr4, Map3k8, Pik3cg, Pik3ap1, Ikbke, and Nlrp3), especially Tlr4, which has been considered a receptor of UA. Notably, SISH reversed high purine-induced gut microbiota dysbiosis, particularly by enhancing the relative abundance of butyric acid-producing bacteria (unidentified_Ruminococcaceae, Oscillibacter, Ruminiclostridium, Intestinimonas). This research provided new insights into the treatment of hyperuricemia. [ABSTRACT FROM AUTHOR]

Featured Application: Nanosensors for extracellular oxygen-sensing. Three four-arm amphiphilic block copolymers with different chain lengths, consisting of a hydrophilic chain of polyethylene glycol (PEG) and hydrophobic segment of polycaprolactam (PCL), were synthesized and used to encapsulate the high-efficient and hydrophobic oxygen probe of platinum(II)-5,10,15,20-tetrakis-(2,3,4,5,6-pentafluorophenyl)-porphyrin (PtTFPP) to form polymer micelles. This approach enabled the use of PtTFPP in aqueous solution for biosensing. Experimental results demonstrated that the particle sizes of these nano-oxygen sensors between 40.0 and 203.8 nm depend on the structures of block copolymers. PtTFPP in these micelles showed an effective quantum yield under nitrogen environment, ranging from 0.06 to 0.159. The new sensors are suitable for analyzing dissolved oxygen concentrations in the range of 0.04–39.3 mg/L by using the linear Stern–Volmer equation at room temperature. In addition, it has been shown that these sensors are capable of in situ monitoring the dissolved oxygens in the culture medium of E. coli and Romas cells during the respiration process, and distinguishing the drug activity of antibiotic ampicillin from that of antimycin A. This study showed that the use of these nanostructured multi-arm block copolymer micelles can achieve efficient biological applications without specific structural modification of the hydrophobic PtTFPP probe, which is expected to have broad prospects. [ABSTRACT FROM AUTHOR]

In this study, we developed fluorescent dual pH and oxygen sensors loaded in multi-well plates for in-situ and high-throughput monitoring of oxygen respiration and extracellular acidification during microbial cell growth for understanding metabolism. Biocompatible PHEMA-co-PAM materials were used as the hydrogel matrix. A polymerizable oxygen probe (OS2) derived from PtTFPP and a polymerizable pH probe (S2) derived from fluorescein were chemically conjugated into the matrix to solve the problem of the probe leaching from the matrix. Gels were allowed to cure directly on the bottom of 96-well plates at room-temperature via redox polymerization. The influence of matrix’s composition on the sensing behaviors was investigated to optimize hydrogels with enough robustness for repeatable use with good sensitivity. Responses of the dual sensing hydrogels to dissolved oxygen (DO) and pH were studied. These dual oxygen-pH sensing plates were successfully used for microbial cell-based screening assays, which are based on the measurement of fluorescence intensity changes induced by cellular oxygen consumption and pH changes during microbial growth. This method may provide a real-time monitoring of cellular respiration, acidification, and a rapid kinetic assessment of multiple samples for cell viability as well as high-throughput drug screening. All of these assays can be carried out by a conventional plate reader. [ABSTRACT FROM AUTHOR]

The effect of hot working parameters on the microstructure and texture evolution of the hot-deformed Zr-45Ti-5Al-3V alloy was studied by the electron backscatter diffraction (EBSD) technique. It was found that a high density of dislocations were generated when the alloy was deformed at 700 °C/0.001 s−1 and 800 °C/1 s−1. With the increment in hot-deformation temperature and the decrease in strain rate, the dislocation density decreased due to the increase in dynamic recrystallization (DRX) degree. The discontinuous dynamic recrystallization (DDRX) and continuous dynamic recrystallization (CDRX) mechanisms co-existed during the hot working of the Zr-45Ti-5Al-3V alloy at a true strain of 0.7. The texture evolution of the alloy during hot working was characterized and the texture component mainly consisted of {001}<100>, {011}<100>, {110}<112>, and {112}<110> textures. The volume fractions of {001}<100> and {011}<100> textures obviously rose with the reduction in strain rate, whereas those of {110}<112> and {112}<110> textures gradually decreased. At a given strain rate, an increase trend in the volume fraction of the {001}<100> texture was observed with rising hot-deformation temperature, while the volume fraction of the {011}<100> texture first increased and then decreased. An opposite trend was visible in the {112}<110> and {110}<112> texture compared with {011}<100> textures. [ABSTRACT FROM AUTHOR]

Avoiding excessive or insufficient immune responses and maintaining homeostasis are critical for animal survival. Although many positive or negative modulators involved in immune responses have been identified, little has been reported to date concerning whether the long non-coding RNA (lncRNA) can regulate Drosophila immunity response. In this study, we firstly discover that the overexpression of lncRNA-CR11538 can inhibit the expressions of antimicrobial peptides Drosomycin (Drs) and Metchnikowin (Mtk) in vivo, thereby suppressing the Toll signaling pathway. Secondly, our results demonstrate that lncRNA-CR11538 can interact with transcription factors Dif/Dorsal in the nucleus based on both subcellular localization and RIP analyses. Thirdly, our findings reveal that lncRNA-CR11538 can decoy Dif/Dorsal away from the promoters of Drs and Mtk to repress their transcriptions by ChIP-qPCR and dual luciferase report experiments. Fourthly, the dynamic expression changes of Drs, Dif, Dorsal and lncRNA-CR11538 in wild-type flies (w1118) at different time points after M. luteus stimulation disclose that lncRNA-CR11538 can help Drosophila restore immune homeostasis in the later period of immune response. Overall, our study reveals a novel mechanism by which lncRNA-CR11538 serves as a Dif/Dorsal decoy to downregulate antimicrobial peptide expressions for restoring Drosophila Toll immunity homeostasis, and provides a new insight into further studying the complex regulatory mechanism of animal innate immunity. [ABSTRACT FROM AUTHOR]

The development of tourism is based on tourism flow and studying a tourism flow network can help to elucidate its mechanism of operation. Transportation network is the path to realize the spatial displacement of tourism flow. This study used "Tencent migration" big data to explore the spatial distribution characteristics and rules of tourism flow in China, providing suggestions for the development of tourism. The results demonstrate that the 361 cities studied can be divided into three types: destination-oriented, tourist-origin-oriented, and destination-oriented and tourist-origin-oriented. There are significant differences in the quantity of flow, the area of concentration, and the factors affecting the flow in the three types of cities. The larger the flow of tourism between cities, the higher the network level, and the wider the network range. The high-level nodes are closely related, while the peripheral nodes are more widely distributed, with weak attractiveness and inconvenient traffic, forming a "core-edge" structure. Different network patterns are established for different modes of transportation. The degree of response of different types of transportation to distance is the main factor influencing the network patterns of diverse paths. These findings have practical implications for the choice of appropriate travel destinations and transportation modes for tourists. [ABSTRACT FROM AUTHOR]

In recent years, environmentally-friendly, sustainable, and compact development has become increasingly popular with governments. An extensive body of literature has focused on the influence on housing prices from an economic perspective. Although residential urban planning from the perspective of individual needs must be considered, little attention has been paid to residents' demands in high-density and compact urban areas. In this study, we selected Hong Kong as the case and adopted a reliability interval method to rank residential attitude metrics, which indicated residents' neighborhood needs in densely populated cities. The influences of location attributes on residents' demands and residential value were compared. A hedonic price model was used to estimate the impacts of the attributes on housing prices. The results showed that both access to metro stations and median household income had important influences on residents' preferences and housing prices. However, access to the central business district contributed largely to housing prices but not to residents' attitudes. These findings support urban planners and policy makers during sustainable residential planning and policy formation by understanding residents' needs in compact urban areas, help them to optimize the match between housing attributes and residents' expectations, and balance the relationship between residents' needs and economic interest. [ABSTRACT FROM AUTHOR]

To constitute and adjust the injection and production pattern in fractured-vuggy reservoirs, we extracted twelve fractured-cave structures, fabricated them into physical models with acrylic plates, and performed experiments via these models. The results show that utilizing oil/water gravity segregation sufficiently and forming valid flow channels should be emphasized. Preferentially exploiting the reservoir body containing intermediate-scaled or large-scaled caves, arranging injection wells in fractures or small-scaled caves while placing production wells in large-scaled caves, and separately putting injection wells and production wells in low/high parts of an intermediate-scaled or large-scaled cave, were found to benefit oil/water gravity segregation and thus gain a better water flooding effect in these experiments. Experiments with combined models also figured out that, after adjusting the injection and production pattern, the valid flow channel newly formed must pass through caves containing enough residual oil to improve the water flooding effect and could be obtained by shutting down the old production well while adding a new production well, adding a new production well, or switching the production well into an injection well while adding a new production well. In the actual field, adjusting the well location and altering the flow channel were proposed to conduct together. This study may provide references on the production management of analogous reservoirs. [ABSTRACT FROM AUTHOR]

Luffa is a lightweight porous material with excellent biocompatibility and abundant resources. In this paper, three kinds of softening treatment methods, alkali-hydrogen peroxide (Method 1), alkali-acetic acid (Method 2), and alkali-urea (Method 3), were used to soften high-density (HD) cylindrical luffa (CL) mattress-filling materials (MFM). Microscopic observation, mechanical performance testing and other analyses were performed to evaluate the effects of the three kinds of softening methods on the wettability, compression resilience and support performance of CL MFM. The results showed that: (1) After the treatment by Method 1, Method 2 and Method 3, the peak stress of CL decreased by 73%, 10% and 27%, respectively. In addition, after three kinds of softening treatments, the uniformity of CL increased. (2) When the CL MFM of high density rank treated by Method 1 was compressed by 40%, the firmness values of the surface, core and bottom reduced by 53.49% 40.72%, and 46.17%, respectively, compared to that of untreated CL. In addition, for the CL MFM of high density rank treated by Method 3 and then compressed to 60%, the firmness of the surface layer, core layer and bottom layer reduced by 41.2%, 33.7%, and 36.9%, respectively. (3) The contact angle of luffa treated by Method 3 was the smallest, next came Method 1 and Method 2, and untreated was the largest. (4) After the treatment by Method 3, the fiber bundle of luffa was intact, and the compression resilience of the CL was obviously increased. Therefore, this method can effectively reduce the firmness of MFM and also improve the uniformity and wettability of CL. [ABSTRACT FROM AUTHOR]

DNA nanostructures, owing to their controllable and adaptable nature, have been considered as highly attractive nanoplatforms for biomedical applications in recent years. However, their use in the biological environment has been restricted by low cellular transfection efficiency in mammalian cells, weak stability under physiological conditions, and endonuclease degradation. Herein, we demonstrate an effective approach to facilitate fast transfection of DNA nanostructures and enhance their stability by encapsulating DNA origami with a biocompatible cationic protein (cHSA) via electrostatic interaction. The coated DNA origami is found to be stable under physiological conditions. Moreover, the cHSA coating could significantly improve the cellular transfection efficiency of DNA origami, which is essential for biological applications. [ABSTRACT FROM AUTHOR]

New amphiphilic star or multi-arm block copolymers with different structures were synthesized for enabling the use of hydrophobic oxygen probe of platinum (II)-tetrakis (pentafluorophenyl) porphyrin (PtTFPP) for bioanalysis. The amphiphilic star polymers were prepared through the Atom Transfer Radical Polymerization (ATRP) method by using hydrophilic 4-arm polyethylene glycol (4-arm-PEG) as an initiator. Among the five block copolymers, P1 series (P1a, P1b, and P1c) and P3 possess fluorine-containing moieties to improve the oxygen sensitivity with its excellent capacity to dissolve and carry oxygen. A polymer P2 without fluorine units was also synthesized for comparison. The structure-property relationship was investigated. Under nitrogen atmosphere, high quantum efficiency of PtTFPP in fluorine-containing micelles could reach to 22% and long lifetime could reach to 76 μs. One kind of representative PtTFPP-containing micelles was used to detect the respiration of Escherichia coli (E. coli) JM109 and macrophage cell J774A.1 by a high throughput plate reader. In vivo hypoxic imaging of tumor-bearing mice was also achieved successfully. This study demonstrated that using well-designed fluoropolymers to load PtTFPP could achieve high oxygen sensing properties, and long lifetime, showing the great capability for further in vivo sensing and imaging. [ABSTRACT FROM AUTHOR]

Luffa sponge (LS) is a resourceful material with fibro-vascular reticulated structure and extremely high porosity, which make it a potential candidate for manufacturing light mattress. In this study, two types of LS columns, namely high-density (HD) and low-density (LD) columns, were investigated as materials for filling the mattress. The results showed that the compressive strength of HD LS columns was significantly greater than that of LD LS columns. However, the densification strains of the two types of LS column were both in the range of 0.6 to 0.7. Besides, HD LS columns separately pressed to the smooth plateau region and the initial densification region exhibited a partial recovery of instant height when they were unloaded, and then both of them showed no more than 4.2% of height recovery after being allowed to rest at a constant temperature and humidity for 24 h. In contrast, when LD LS columns were compressed to the smooth plateau region, the height recovery was less than 1.62% compared to when they were pressed to the initial densification region, and that was more than 15.62%. Similar to other plant fibers used as mattress fillers, the two types of LS columns also showed good water absorption capacity—both of them could absorb water from as much as 2.07 to 3.45 times their own weight. At the same time, the two types of LS columns also showed good water desorption. The water desorption ratio of HD and LD LS columns separately reached 76.86 and 91.44%, respectively, after being let rest at a constant temperature and humidity for 13 h. [ABSTRACT FROM AUTHOR]

Perfluorodecanoic acid (PFDA), an enduring and harmful organic pollutant, is widely employed in diverse food-related sectors. Our previous studies have provided evidence that PFDA has the potential to facilitate obesity and hepatic fat accumulation induced by high-fat diet (HFD) intake. Epigallocatechin-3-gallate (EGCG), a polyphenol found in green tea, has been suggested to possess potential preventive effects against metabolic abnormalities and fatty liver. The purpose of this research was to investigate the effects of EGCG on PFDA-exacerbated adiposity and hepatic lipid accumulation in HFD-fed mice. The results showed that EGCG reduced body weight gain; tissue and organ weights; blood glucose, serum insulin, HOMA-IR, leptin, and lipid parameters; serum inflammatory cytokines (IL-1β, IL-18, IL-6, and TNF-α); and hepatic lipid accumulation in PFDA-exposed mice fed an HFD. Further work showed that EGCG improved liver function and glucose homeostasis in mice fed an HFD and co-exposed to PFDA. The elevated hepatic mRNA levels of SREBP-1 and associated lipogenic genes, NLRP3, and caspase-1 in PFDA-exposed mice fed an HFD were significantly decreased by EGCG. Our work provides evidence for the potential anti-obesity effect of EGCG on co-exposure to HFD and PFDA and may call for further research on the bioactivity of EGCG to attenuate the endocrine disruption effects of long-term exposure to pollutants.

(1) Background: Although a body of evidence demonstrates that acute exercise improves executive function, few studies have compared more complex, laboratory-based modes of exercise, such as soccer that involve multiple aspects of the environment. (2) Methods: Twelve experienced soccer players (24.8 ± 2 years) completed three counterbalanced 20 min sessions of (1) seated rest; (2) moderate intensity treadmill exercise; and (3) a game of futsal. Once heart rate returned to within 10% of pre-activity levels, participants completed the Stroop Color Word Conflict Task while reaction time (RT) and P300 event-related potentials were measured. (3) Results: Reaction time during Stroop performance was significantly faster following the futsal game and treadmill exercise compared to the seated rest. The P300 amplitude during Stroop performance was significantly greater following futsal relative to both treadmill and seated-rest conditions. (4) Conclusions: These findings suggest that single bouts of indoor soccer among college-aged soccer players, compared to treadmill and seated-rest conditions, may engender the greatest effect on brain networks controlling attention allocation and classification speed during the performance of an inhibitory control task. Future research is needed to determine if cognitively engaging forms of aerobic exercise may differentially impact executive control processes in less experienced and older adult participants., Competing Interests: The authors declare no conflict of interest.