Search

Radiative cooling is an approach that maximizes the thermal emission through the atmospheric window in order to dissipate heat, while minimizing the absorption of incoming atmospheric radiation, to realize a net cooling effect without consuming energy. Electrospun membranes are made of ultra-thin fibers with high porosity and surface area, which makes them suitable for radiative cooling applications. Many studies have investigated the use of electrospun membranes for radiative cooling, but a comprehensive review that summarizes the research progress in this area is still lacking. In this review, we first summarize the basic principles of radiative cooling and its significance in achieving sustainable cooling. We then introduce the concept of radiative cooling of electrospun membranes and discuss the selection criteria for materials. Furthermore, we examine recent advancements in the structural design of electrospun membranes for improved cooling performance, including optimization of geometric parameters, incorporation of highly reflective nanoparticles, and designing multilayer structure. Additionally, we discuss dual-mode temperature regulation, which aims to adapt to a wider range of temperature conditions. Finally, we provide perspectives for the development of electrospun membranes for efficient radiative cooling. This review will provide a valuable resource for researchers working in the field of radiative cooling, as well as for engineers and designers interested in commercializing and developing new applications for these materials. [ABSTRACT FROM AUTHOR]

Plastic electrodes are desirable for the rapid development of flexible organic electronics. In this article, a plastic electrode has been prepared by employing traditional conducting polymer poly(3,4-ethylenedioxythiophene):poly(styrene sulfonate) (PEDOT:PSS) and plastic substrate polyethersulfone (PES). The completed electrode (Denote as HC-PEDOT:PSS) treated by 80% concentrated sulfuric acid (H2SO4) possesses a high electrical conductivity of over 2673 S/cm and a high transmittance of over 90% at 550 nm. The high conductivity is attributed to the regular arrangement of PEDOT molecules, which has been proved by the X-ray diffraction characterization. Temperature-dependent conductivity measurement reveals that the HC-PEDOT:PSS possesses both semiconducting and metallic properties. The binding force and effects between the PEDOT and PEI are investigated in detail. All plastic solar cells with a classical device structure of PES/HC-PEDOT:PSS/PEI/P3HT:ICBA/EG-PEDOT:PSS show a PCE of 4.05%. The ITO-free device with a structure of Glass/HC-PEDOT:PSS/Al4083/PM6:Y6/PDINO/Ag delivers an open-circuit voltage (VOC) of 0.81 V, short-circuit current (JSC) of 23.5 mA/cm2, fill factor (FF) of 0.67 and a moderate power conversion efficiency (PCE) of 12.8%. The above results demonstrate the HC-PEDOT:PSS electrode is a promising candidate for all-plastic solar cells and ITO-free organic solar cells. [ABSTRACT FROM AUTHOR]

In recent years, golden tides caused by drifting Sargassum horneri (Turner) C. Agardh have caused serious ecological disasters in coastal areas of China. Eutrophication is an important cause of the formation of the golden tide. Additionally, the drifting population on the surface of the ocean is exposed to more ultraviolet radiation (UVR) than the attached population on the sea floor. In this study, the thalli of S. horneri were cultivated under two levels of nitrogen (LN: natural seawater, in which the concentration of NO3−-N was 1 µmol L−1; HN: NO3−-enriched seawater, in which the concentration of NO3−-N was 200 μmol L−1) for 6 days with low photosynthetically active radiation (PAR), and then exposed to three levels of radiation (P: photosynthetically active radiation (PAR), 400–700 nm; PA: PAR + UVA, 320–700 nm; PAB: PAR + UVA + UVB, 280–700 nm) under each level of nitrogen for 2 h to investigate the effects of high UVR and nitrogen on photosynthesis. The results showed that the high level of N (HN) only enhanced the synthesis of pigments after 6 days of pre-cultivation under low PAR. After 2 h of high UVR exposure, high P, PA, and PB decreased the maximum photochemical quantum yield (Fv/Fm) and increased non-photochemical quenching (NPQ) in S. horneri regardless of the N level, and PAB significantly decreased Fv/Fm compared to PA under the LN condition alone. Under the LN condition, compared to the P group, PA and PAB significantly promoted the synthesis of carotenoids. Under the HN condition, compared to the P group, PAB increased the absorbed flux by active RCs (ABS/RC) and dissipated the energy flux by active RCs (DI0/RC) in S. horneri alone. Furthermore, HN increased Fv/Fm, ABS/RC, and DI0/RC more in S. horneri with PAB in comparison to those in the LN and PAB group. However, no significant differences in these parameters were observed between the LN and HN conditions under the same UVR treatments. These results demonstrate that drifting S. horneri on the surface of seawater could be inhibited by the high P; however, S. horneri living in eutrophic high-nitrogen seawater may have a stronger ability to resist high UVR damage, especially with regard to PAB radiation, which may be one of the reasons for the formation of golden tides in coastal seawater. [ABSTRACT FROM AUTHOR]

Sargassum golden tides (GT) are common in numerous coastal areas all over the world, and it adversely affects local marine life. Eutrophication is critical for Sargassum GT development. However, its physiological and ecological mechanism remains unclear. To investigate the responses of drifting Sargassum horneri, the species causing GT in the western Pacific, to light and enriched nitrogen, we set three light conditions (Low-light (LL), 10 μmol photons m−2 s−1; Middle-light (ML), 60 μmol photons m−2 s−1; and High-light (HL), 300 μmol photons m−2 s−1) and three nitrogen conditions (Natural seawater, the final concentration of N was 31.8 μmol L−1, including 30.5 μmol L−1 of NO3− and 1.3 μmol L−1 of NH4+; Enrichment of NO3−, final concentration of N was 200 μmol L−1; and Enrichment of NH4+, the final concentration of N was 200 μmol L−1), and grew the thalli under varying conditions for 10 days before determining the growth and utilization of carbon and nitrogen. Based on the accumulated data, the elevated light level led to a higher growth rate of alga. In the LL culture, the higher capacity for carbon utilization, which was reflected by the higher maximum photosynthetic carbon fixation rate (Vmax), resulted in the elevated growth rates of thalli in the nitrogen-enriched media as compared with the natural seawater. Furthermore, a higher growth rate was found in the enrichment of NH4+ despite a low affinity for inorganic carbon indicated by a higher value of the half-saturation constant (K0.5). In the ML treatment, an insignificant difference in growth rate was found in three nitrogen cultures, except for a slight increase in the enrichment of NH4+ than the enrichment of NO3−. In the HL treatment, compared with natural seawater culture, enrichment of NO3− or NH4+ accelerated the growth of alga, with no significant difference between the two nitrogen sources. Such enhancement in growth was related to the more photosynthetic carbon fixation, indicated by the higher value of Vmax and soluble carbohydrates content of alga cultured with NO3− and NH4+ enrichments. Additionally, the uptake and assimilation products of nitrogen, such as pigments and soluble proteins, remained unaffected by nitrogen source enrichment of NO3− or NH4+ at all three light levels. In conclusion, enrichment of NO3− and NH4+ exhibited different influences on the growth of S. horneri at different light levels, which was mainly associated with the capacity and efficiency of photosynthetic carbon utilization. At the HL level, both the enrichment of NO3− and NH4+ dramatically accelerate the growth of alga by stimulating the photosynthetic carbon fixation. Accordingly, we speculated that drifting S. horneri, exposed to HL level on the surface of the sea, were likely to develop rapidly to form GT in eutrophic oceanic areas with upwelled and river plume NO3− or NH4+ nutrients. [ABSTRACT FROM AUTHOR]

Fire is indeed one of the major contributing factors to fatalities, property damage, and economic disruption. A large number of fire incidents across the world cause devastation beyond measure and description every year. To minimalize their impacts, the implementation of innovative and effective fire early warning technologies is essential. Despite the fact that research publications on fire detection technology have addressed the issue to some extent, fire detection technology still confronts hurdles in decreasing false alerts, improving sensitivity and dynamic responsibility, and providing protection for costly and complicated installations. In this review, we aim to provide a comprehensive analysis of the current futuristic practices in the context of fire detection and monitoring strategies, with an emphasis on the methods of detecting fire through the continuous monitoring of variables, such as temperature, flame, gaseous content, and smoke, along with their respective benefits and drawbacks, measuring standards, and parameter measurement spans. Current research directions and challenges related to the technology of fire detection and future perspectives on fabricating advanced fire sensors are also provided. We hope such a review can provide inspiration for fire sensor research dedicated to the development of advanced fire detection techniques. [ABSTRACT FROM AUTHOR]

Biomass burning (BB) plays an important role in the formation of heavy pollution events during harvest seasons in the Beijing–Tianjin–Hebei (BTH) region by releasing trace gases and particulate matter into the atmosphere. A better understanding of spatial-temporal variations of BB in BTH is required to assess its impacts on air quality, especially on heavy haze pollution. The fourth version of the Global Fire Emissions Database (GFED4)'s fire counts and carbon emissions data were used in this research, which shows the varying number of fire counts in China from 2003 to 2020 demonstrated a fluctuating but generally rising trend, with a peak in 2013. Most fire counts were concentrated in three key periods: March (11%), June–July (33%), and October (9.68%). The increase in fire counts will inevitably lead to the growth of carbon emissions. The four major vegetation types of the fires were agriculture (58.1%), followed by grassland (35.5%), and forest (4.1%), with the fewest in peat. In addition, a separate study for the year 2020 found that the fire counts and carbon emissions were different for this year, with the overall average trend in the study time. For example, the monthly peak fire counts changed from June to March. The cumulative emissions of carbon, CO, CO2, CH4, dry matter, and particulate matter from BB in BTH reached 201 Gg, 39 Gg, 670 Gg, 2 Gg, 417 Gg, and 3 Gg in 2020, respectively. [ABSTRACT FROM AUTHOR]

Biofouling is a common but significant issue in the membrane process as it reduces permeate flux, increases energy costs, and shortens the life span of membranes. As an effective antibacterial agent, a small amount of silver nanoparticles (AgNPs) immobilized on membrane surfaces will alleviate the membrane from biofouling. However, loading AgNPs on the membrane surface remains a challenge due to the low loading efficiency or the lack of bonding stability between AgNPs and the membrane surface. In this study, a substrate-independent method is reported to immobilize silver nanoparticles on polymeric membrane surfaces by firstly modifying the membrane surface with functional groups and then forming silver nanoparticles in situ. The obtained membranes had good anti-biofouling properties as demonstrated from disk diffusion and anti-biofouling tests. The silver nanoparticles were stably immobilized on the membrane surfaces and easily regenerated. This method is applicable to various polymeric micro-, ultra-, nano-filtration and reverse osmosis (RO) membranes. [ABSTRACT FROM AUTHOR]