Search

The high-performance determination of heavy metal ions (Cd2+) in water sources is significant for the protection of public health and safety. We have developed a novel sensor of nanograss boron and nitrogen co-doped diamond (NGBND) to detect Cd2+ using a simple method without any masks or reactive ion etching. The NGBND electrode is constructed based on the co-doped diamond growth mode and the removal of the non-diamond carbon (NDC) from the NGBND/NDC composite. Both the enlarged surface area and enhanced electrochemical performance of the NGBND film are achievable. Scanning electron microscopy, Raman spectroscopy, X-ray photoelectron spectroscopy, cyclic voltammetry, electrochemical impedance spectroscopy, and differential pulse anodic stripping voltammetry (DPASV) were used to characterize the NGBND electrodes. Furthermore, we used a finite element numerical method to research the current density near the tip of NGBND. The NGBND sensor exhibits significant advantages for detecting trace Cd2+ via DPASV. A broad linear range of 1 to 100 μg L−1 with a low detection limit of 0.28 μg L−1 was achieved. The successful application of this Cd2+ sensor indicates considerable promise for the sensitive detection of heavy metal ions. [ABSTRACT FROM AUTHOR]

Nano-needle boron-doped diamond (NNBDD) films increase their performance when used as electrodes in the determination of Pb2+. We develop a simple and economical route to produce NNBDD based on the investigation of the diamond growth mode and the ratio of diamond to non-diamond carbon without involving any templates. An enhancement in surface area is achievable for NNBDD film. The NNBDD electrodes are characterized through scanning electron microscopy, Raman spectroscopy, X-ray diffraction, cyclic voltammetry, electrochemical impedance spectroscopy, and differential pulse anodic stripping voltammetry (DPASV). Furthermore, we use a finite-element numerical method to research the prospects of tip-enhanced electric fields for sensitive detection at low Pb2+ concentrations. The NNBDD exhibits significant advantages and great electrical conductivity and is applied to detect trace Pb2+ through DPASV. Under pre-deposition accumulation conditions, a wide linear range from 1 to 80 µgL−1 is achieved. A superior detection limit of 0.32 µgL−1 is achieved for Pb2+, which indicates great potential for the sensitive detection of heavy metal ions. [ABSTRACT FROM AUTHOR]

Identifying unbalanced phase currents is crucial for control and fault alarm rates in power grids, especially in urban distribution networks. The zero-sequence current transformer, specifically designed for measuring unbalanced phase currents, offers advantages in measurement range, identity, and size, compared to using three separate current transformers. However, it cannot provide detailed information on the unbalance status beyond the total zero-sequence current. We present a novel method for identifying unbalanced phase currents based on phase difference detection using magnetic sensors. Our approach relies on analyzing phase difference data from two orthogonal magnetic field components generated by three-phase currents, as opposed to the amplitude data used in previous methods. This enables the differentiation of unbalance types (amplitude unbalance and phase unbalance) through specific criteria and allows for the simultaneous selection of an unbalanced phase current in the three-phase currents. In this method, the amplitude measurement range of magnetic sensors is no longer a critical factor, allowing for an easily attainable wide identification range for current line loads. This approach offers a new avenue for unbalanced phase current identification in power systems. [ABSTRACT FROM AUTHOR]

The acoustic non-linearity parameter of Rayleigh waves can be used to detect various defects (such as dislocation and micro-cracks) on material surfaces of thick-plate structures; however, it is generally low and likely to be masked by noise. Moreover, conventional methods used with non-linear Rayleigh waves exhibit a low detection efficiency. To tackle these problems, a method of exciting reversed-phase Rayleigh waves in opposite directions is proposed to measure the acoustic non-linearity parameter of materials. For that, two angle beam wedge transducers were placed at the two ends of the upper surface of a specimen to excite two Rayleigh waves of opposite phases, while a normal transducer was installed in the middle of the upper surface to receive them. By taking specimens of 0Cr17Ni4Cu4Nb martensitic stainless steel subjected to fatigue damage as an example, a finite element simulation model was established to test the proposed method of measuring the acoustic non-linearity parameter. The simulation results show that the amplitude of fundamentals is significantly reduced due to offset, while that of second harmonics greatly increases due to superposition because of the opposite phases of the excited signals, and the acoustic non-linearity parameter thus increases. The experimental research on fatigue damage specimens was carried out using this method. The test result was consistent with the simulation result. Thus, the method of exciting reversed-phase Rayleigh waves in opposite directions can remarkably increase the acoustic non-linearity parameter. Additionally, synchronous excitation with double-angle beam wedge transducers can double the detection efficiency. [ABSTRACT FROM AUTHOR]

Energy transfer is known to have a significant influence on random lasers. However, the study about the effect of energy transfer between metallic salt and dye molecules on random lasers is still lacking at present. Here, we investigate random lasing actions in Pyrromethene-597 (PM597), PM597-doped MnCl₂ (manganese (II) chloride), PM597-doped polymer-dispersed liquid crystal (PDLC) and PM597-doped PDLC with MnCl₂ capillary systems. We find that random lasing of the systems with MnCl₂ exhibits lower threshold, higher intensity, sharper peak and variable resonance wavelength in comparison with the systems without MnCl₂. This behavior is closely related to the decrease of fluorescence quenching effect and the enhancement of local field induced by energy transfer between MnCl₂ and PM597. Red-shift of wavelength is observed with increasing dosage concentration of MnCl₂ in the PM597-doped PDLC with MnCl₂ system. Through the analysis of single-shot emission spectra of PM597-doped PDLC without and with MnCl₂ systems, the role of MnCl₂ in the coupling of lasing modes is confirmed. Lengths of laser oscillation cavities of the PM597-doped PDLC without and with MnCl₂ systems are calculated by a power Fourier transform (PFT) analysis of their emission spectra. It well accounts for the effect of MnCl₂ on the variation of the oscillation cavity.