Search

The correlation between the grain refining effect of TiC on the microstructure of Pr2Co14B melt-spun ribbons and the magnetic properties is presented in this study. TiC enabled greater control of microstructure both in the as-spun and heat treated Pr2Co14B, compared with the material without TiC. As a result, coercivity of the sample with TiC was nearly twice that of the sample without TiC. In addition to Pr2Co14B, two other phases were found in the sample with TiC: one rich in Co and the other having a composition near PrCo2. TiC was found near the grain boundaries and at triple junctions. Also no Ti or C was found in the matrix phase indicating extreme low solubility of the elements when both are present with Pr2Co14B. As expected, both the samples with and without TiC have similar anisotropy field but the presence of room temperature non-ferromagnetic phases (TiC and PrCo2), caused a small decrease in magnetization of the sample with TiC although the romance of the isotropic materials were comparable. [ABSTRACT FROM AUTHOR]

In biological micromanipulation, cell penetration is a typical procedure that precedes cell injection or oocyte enucleation. During this procedure, cells usually undergo significant deformation, which leads to cell damage. In this paper, we focus on modeling and evaluating the cell penetration process to reduce cell deformation and stress, thereby reducing cell damage. Initially, a finite element model (FEM) is established to simulate the cell penetration process. The effectiveness of the model is then verified through visual detection and comparison of cell deformation with experimental data. Next, various mechanical responses are analyzed, considering the influence of parameters, such as the radius and shape of the injection micropipettes, material properties, and size of the cells. Finally, the relationship between the intracellular stress and the cell penetration depth of biological cells is obtained. The evaluation results will be applied to develop optimized operation plans, enhancing the efficiency and safety of the cell penetration process.

Lithium-sulfur (Li-S) batteries offer a high theoretical energy density but suffer from poor cycling stability and polysulfide shuttling, which limits their practical application. To address these challenges, we developed a PANI-modified MoS 2 -NG composite, where MoS 2 nanoflowers were uniformly grown on graphene oxide (GO) through PANI modification, resulting in an increased interlayer spacing of MoS 2 . This expanded spacing exposed more active sites, enhancing polysulfide adsorption and catalytic conversion. The composite was used to prepare MoS 2 -NG/PP separators for Li-S batteries, which achieved a high specific capacity of 714 mAh g -1 at a 3 C rate and maintained a low capacity decay rate of 0.085% per cycle after 500 cycles at 0.5 C. The larger MoS 2 interlayer spacing was key to improving redox reaction kinetics and suppressing the shuttle effect, making the MoS 2 -NG composite a promising material for enhancing the performance and stability of Li-S batteries.

Hermansky-Pudlak syndrome (HPS)-associated pulmonary fibrosis (HPS-PF) is a progressive lung disease that is a major cause of morbidity and mortality in HPS patients. Previous studies have demonstrated that the HPS proteins play an essential role in the biogenesis and function of lysosome-related organelles (LROs) in alveolar epithelial type II (AT2) cells and found that HPS-PF is associated with dysfunction of AT2 cells and abnormal immune reactions. Despite recent advances in research on HPS and the pathology of HPS-PF, the pathological mechanisms underlying HPS-PF remain poorly understood, and no effective treatment has been established. Therefore, it is necessary to refresh the progress in the pathogenesis of HPS-PF to increase our understanding of the pathogenic mechanism of HPS-PF and develop targeted therapeutic strategies. This review summarizes the recent progress in the pathogenesis of HPS-PF provides information about the current treatment strategies for HPS-PF, and hopefully increases our understanding of the pathogenesis of HPS-PF and offers thoughts for new therapeutic interventions.

Blueberries ( Vaccinium spp.) are extremely sensitive to drought stress. Flavonoids are crucial secondary metabolites that possess the ability to withstand drought stress. Therefore, improving the drought resistance of blueberries by increasing the flavonoid content is crucial for the development of the blueberry industry. To explore the underlying molecular mechanism of blueberry in adaptation to drought stress, we performed an integrated analysis of the metabolome and transcriptome of blueberry leaves under drought stress. We found that the most enriched drought-responsive genes are mainly involved in flavonoid biosynthesis and plant hormone signal transduction pathways based on transcriptome data and the main drought-responsive metabolites come from the flavonoid class based on metabolome data. The UDP-glucose flavonoid 3-O-glucosyl transferase ( UFGT ), flavonol synthase ( FLS ), and anthocyanidin reductase ( ANR-2 ) genes may be the key genes for the accumulation of anthocyanins, flavonols, and flavans in response to drought stress in blueberry leaves, respectively. Delphinidin 3-glucoside and delphinidin-3-O-glucoside chloride may be the most important drought-responsive flavonoid metabolites. VcMYB1 , VcMYBPA1 , MYBPA1.2 , and MYBPA2.1 might be responsible for drought-induced flavonoid biosynthesis and VcMYB14, MYB14, MYB102 , and MYB108 may be responsible for blueberry leaf drought tolerance. ABA responsive elements binding factor ( ABF ) genes, MYB genes, bHLH genes, and flavonoid biosynthetic genes might form a regulatory network to regulate drought-induced accumulation of flavonoid metabolites in blueberry leaves. Our study provides a useful reference for breeding drought-resistant blueberry varieties.

Abandoned object detection is a critical task in the field of public safety. However, existing methods perform poorly when detecting small and occluded objects, leading to high false detection and missed detection rates. To address this issue, this paper proposes an abandoned object detection method that integrates an adaptive dual-background model with SAO-YOLO (Small Abandoned Object YOLO). The goal is to reduce false and missed detection rates for small and occluded objects, thereby improving overall detection accuracy. First, the paper introduces an adaptive dual-background model that adjusts according to scene changes, reducing noise interference in the background model. When combined with an improved PFSM (Pixel-based Finite State Machine) model, this enhances detection accuracy and robustness. Next, a network model called SAO-YOLO is designed. Key improvements within this model include the SAO-FPN (Small Abandoned Object FPN) feature extraction network, which fully extracts features of small objects, and a lightweight decoupled head, SODHead (Small Object Detection Head), which precisely extracts local features and enhances detection accuracy through multi-scale feature fusion. Finally, experimental results show that SAO-YOLO increases mAP@0.5 and mAP@0.5:0.95 by 9.0% and 5.1%, respectively, over the baseline model. It outperforms other advanced detection models. Ultimately, after a series of experiments on the ABODA, PETS2006, and AVSS2007 datasets, the proposed method achieved an average detection precious of 91.1%, surpassing other advanced methods. It significantly outperforms other advanced detection methods. This approach notably reduces false and missed detections, especially for small and occluded objects.

Background: The dramatic temperature fluctuations spurred by global warming and the accompanying extreme weather events inhibit mango growth and threaten mango productivity. Particularly, mango flowering is highly sensitive to temperature changes. The mango fruit setting rate was significantly positively correlated with pollen activity, and pollen activity was regulated by different metabolites., Methods: In this study, the in vitro pollen of two mango varieties ('Renong No.1' and 'Jinhuang'), in which sensitivity to temperature differed significantly, were subjected to different temperature stresses (15 °C, 25 °C and 35 °C), and their metabolomics were analyzed., Results: The present results showed that 775 differential metabolites were screened by liquid chromatography-mass spectrometry and divided into 12 categories. The two varieties had significant differences in metabolite expression under different temperature stresses and the effect of low temperature on 'Renong No.1' mainly focused on amino acid metabolism, while the effect on 'Jinhuang' was mainly related to glycolysis. However, under the 35 °C temperature stress, 'Renong No.1' responded by redistributing riboflavin and betaine in vivo and the most obvious metabolic pathway of 'Jinhuang' enrichment was pyrimidine metabolism, which had undergone complex main body formation and extensive regulatory processes. The changes of metabolites of different varieties under low temperature and high temperature stress were different. Among them, flavonoids or flavonoid derivatives were included in class A (216 metabolites), C (163 metabolites) and D (233 metabolites) metabolites, indicating that flavonoid metabolites had an obvious regulatory effect on mango pollen metabolism under different temperature stress., Conclusions: The present results provide valuable information for reproductive biology studies and breeding in mango, in particular, the selection and breeding of the most suitable varieties for different production areas.

The autophagy-lysosome axis is an evolutionarily conserved intracellular degradation pathway which constitutes an important component of host innate immunity against microbial infections. Here, we show that African swine fever virus (ASFV), one of most devastating pathogens to the worldwide swine industry, can reshape the autophagy-lysosome axis by recruiting the critical lysosome membrane proteins (LAMP1 and LAMP2) to viral factories while inhibiting autophagic induction in macrophages. The screening of viral membrane proteins led to the identification of several ASFV membrane proteins, exemplified by viral protein pEP153R, that could significantly alter the subcellular localization of LAMP1/2 when expressed alone in transfected cells. Further analysis showed that pEP153R was also a component of viral factories and could induce endoplasmic reticulum (ER) retention of LAMP1/2, leading to the inhibition of the fusion of autophagosomes with lysosomes. Interestingly, the ASFV mutant lacking EP153R could still actively recruit LAMP into viral factories (VFs) and inhibit autophagic flux, indicating the existence of a functional redundancy of other viral proteins in the absence of pEP153R and highlighting the complexity of ASFV replication biology. Taken together, our results reveal novel information about the interplay of ASFV with the autophagy-lysosome axis and a previously unrecognized function of ASFV protein pEP153R in regulating the cellular autophagic process.

The vitreous humor (VH) is a transparent gelatin-like substance that occupies two-thirds of the eyeball and undergoes the most significant changes during eye elongation. Quantitative proteomics on the normal growth period in the VH could provide new insights into understanding its progression mechanism in the early stages of myopia. In this study, a data-independent acquisition (SWATH-MS) was combined with targeted LC-ESI-MS/MS to identify and quantify the relative protein changes in the vitreous during the normal growth period (4, 7, 14, 21 and 28 days old) in the chick model. Chicks were raised under normal growing conditions (12/12 h Dark/light cycle) for 28 days, where ocular measurements, including refractive and biometric measurements, were performed on days 4 (baseline), 7, 14, 21 and 28 ( n = 6 chicks at each time point). Extracted vitreous proteins from individual animals were digested and pooled into a left eye pool and a right pool at each time point for protein analysis. The vitreous proteome for chicks was generated using an information-dependent acquisition (IDA) method by combining injections from individual time points. Using individual pool samples, SWATH-MS was employed to quantify proteins between each time point. DEPs were subsequently confirmed in separate batches of animals individually on random eyes ( n = 4) using MRMHR between day 7 and day 14. Refraction and vitreous chamber depth (VCD) were found to be significantly changed ( p < 0.05, n = 6 at each time point) during the period. A comprehensive vitreous protein ion library was built with 1576 non-redundant proteins (22987 distinct peptides) identified at a 1% false discovery rate (FDR). A total of 12 up-regulated and 26 down-regulated proteins were found across all time points compared to day 7 using SWATH-MS. Several DEPs, such as alpha-fetoprotein, the cadherin family group, neurocan, and reelin, involved in structural and growth-related pathways, were validated for the first time using MRMHR under this experimental condition. This study provided the first comprehensive spectral library of the vitreous for chicks during normal growth as well as a list of potential growth-related protein biomarker candidates using SWATH-MS and MRMHR during the emmetropization period.

As a part of the important species that form coral reef ecosystems, stony corals have become a potential source of pharmacologically active lead compounds for an increasing number of compounds with novel chemical structures and strong biological activity. In this study, the secondary metabolites and biological activities are reported for Aspergillus terreus C21-1, an epiphytic fungus acquired from Porites pukoensis collected from Xuwen Coral Reef Nature Reserve, China. This strain was cultured in potato dextrose broth (PDB) media and rice media with different salinities based on the OSMAC strategy. The mycelial morphology and high-performance thin layer chromatographic (HPTLC) fingerprints of the fermentation extracts together with bioautography were recorded. Furthermore, an untargeted metabolomics study was performed using principal component analysis (PCA), orthogonal projection to latent structure discriminant analysis (O-PLSDA), and feature-based molecular networking (FBMN) to analyze their secondary metabolite variations. The comprehensive results revealed that the metabolite expression in A. terreus C21-1 differed significantly between liquid and solid media. The metabolites produced in liquid medium were more diverse but less numerous compared to those in solid medium. Meanwhile, the mycelial morphology underwent significant changes with increasing salinity under PDB cultivation conditions, especially in PDB with 10% salinity. Untargeted metabolomics revealed significant differences between PDB with 10% salinity and other media, as well as between liquid and solid media. FBMN analysis indicated that alkaloids, which might be produced under high salt stress, contributed largely to the differences. The biological activities results showed that six groups of crude extracts exhibited acetylcholinesterase (AChE) inhibitory activities, along with 1,1-diphenyl-2-picrylhydrazyl (DPPH) free radical scavenging and antibacterial activities. The results of this study showed that the increase in salinity favored the production of unique alkaloid compounds by A. terreus C21-1.

Plant-derived medicinal materials have significant potential and promising applications in wound healing and skin regeneration. This study aims to develop a plant-based extract hydrogel from Bletilla striata (Thunb.Reichb.f.), specifically a glucosyloxybenzyl 2-isobutylmalates extract (B), and characterize its potential effects on wound healing. We synthesized the hydrogel using carbomer (C), glycerol (G), and triethanolamine (T) as the matrix, incorporating B into the hydrogel base, and evaluated its physical and chemical properties. In vitro tests assessed the biocompatibility of the glucosyloxybenzyl 2-isobutylmalates-carbomer-glycerol-triethanolamine (B-CGT) hydrogel and its effects on cell proliferation, migration, and adhesion. Animal model experiments evaluated its potential to promote wound healing. The results showed that the prepared B-CGT hydrogel possessed a good three-dimensional network structure and stability, demonstrating significant free radical scavenging capacity in antioxidant tests. In cell experiments, the B-CGT hydrogel exhibited no potential cytotoxicity and showed good hemocompatibility and promotion of cell proliferation. Animal experiments indicated that wounds treated with the B-CGT hydrogel healed significantly faster, with improved formation of new epithelial tissue and collagen. This study suggests that the developed B-CGT hydrogel is a promising candidate for wound dressings, with excellent physicochemical properties and controlled drug release capabilities, effectively promoting the wound healing process.

LSPwC is an important development of Laser shock peening (LSP) technology, and surface texturing is an effective method to improve tribological properties. The combination of these is expected to innovate a new surface texturing technology with a strengthing effect, but no one has attempted it. In this paper, a new LSPTwC technology combining them is innovatively proposed and validated on AISI 9310 steel, which is commonly used in helicopter transmission components for surface texturing. The LSPTwC surface was studied using an optical microscope, electron microscope, energy dispersive spectrometer, and so on. The results proved that LSPTwC is an effective texturing method of AISI 9310 steel, which modulates the texture and improves the properties, such as the microhardness increased by more than 10%. A model for calculating the texture and process parameters is also constructed on a statistical basis, and a modeling method for textured surfaces is proposed. It is verified that the calculation results and the constructed model are highly consistent with the test, with a diameter deviation <3% and depth deviation <4%. The above results can provide the experimental basis, process design method, and calculation model for single-point LSPwC texturing of AISI 9310 steel parts for helicopters, which have application value.

Currently, there is limited research on the in situ forming process of thermoplastic prepreg tape winding, and the unclear impact of process parameters on mechanical properties during manufacturing is becoming increasingly prominent. The study aimed to investigate the influence of process parameters on the mechanical properties of thermoplastic composite materials (CFRP) using laser-assisted CF/PPS winding forming technology. The melting point and decomposition temperature of CF/PPS materials were determined using DSC and TGA instruments, and based on the operating parameters of the laser-assisted winding equipment, the process parameter range for this fabrication technology was designed. A numerical model for the temperature of laser-heated CF/PPS prepreg was established, and based on the filament winding process setup, the heating temperature and tensile strength were simulated and tested. The effects of process parameters on the heating temperature of the prepreg and the tensile strength of NOL rings were then analyzed. The non-dominated sorting genetic algorithm (NSGA-II) was employed to globally optimize the process parameters, aiming to maximize winding rate and tensile strength. The results indicated that core mold temperature, winding rate, laser power, and their interactions significantly affected mechanical properties. The optimal settings were 90 °C, 418.6 mm/s, and 525 W, achieving a maximum tensile strength of 2571.51 MPa. This study provides valuable insights into enhancing the forming efficiency of CF/PPS-reinforced high-performance engineering thermoplastic composites., Competing Interests: The authors declare no conflicts of interest.

Chimeric antigen receptor (CAR) T cell therapy has emerged as a groundbreaking treatment for hematological cancers, yet it faces significant hurdles, particularly regarding its efficacy in solid tumors and concerning associated adverse effects. This review provides a comprehensive analysis of the advancements and ongoing challenges in CAR-T therapy. We highlight the transformative potential of nanotechnology in enhancing CAR-T therapy by improving targeting precision, modulating the immune-suppressive tumor microenvironment, and overcoming physical barriers. Nanotechnology facilitates efficient CAR gene delivery into T cells, boosting transfection efficiency and potentially reducing therapy costs. Moreover, nanotechnology offers innovative solutions to mitigate cytokine release syndrome (CRS) and immune effector cell-associated neurotoxicity syndrome (ICANS). Cutting-edge nanotechnology platforms for real-time monitoring of CAR-T cell activity and cytokine release are also discussed. By integrating these advancements, we aim to provide valuable insights and pave the way for the next generation of CAR-T cell therapies to overcome current limitations and enhance therapeutic outcomes.

The nanofiber materials of three-dimensional spatial structure synthesized by electrospun have the characteristics of high porosity, high specific surface area, and high similarity to the natural extracellular matrix (ECM) of the human body. These are beneficial for absorbing wound exudate, effectively blocking the invasion of external bacteria, and promoting cell respiration and proliferation, which provides an ideal microenvironment for wound healing. Moreover, electrospun nanofiber dressings can flexibly load drugs according to the condition of the wound, further promoting wound healing. Recently, electrospun nanofiber materials have shown promising application prospects as medical dressings in clinical. Based on current research, this article reviewed the development history of wound dressings and the principles of electrospun technology. Subsequently, based on the types of base material, polymer-based electrospun nanofiber dressing and electrospun nanofiber dressing containing drug-releasing factors were discussed. Furthermore, the application of electrospun nanofiber dressing on skin tissue is highlighted. This review aims to provide a detailed overview of the current research on electrospun nanomaterials for wound healing, addressing challenges and suggesting future research directions to advance the field of electrospun dressings in wound healing.

Glycolysis of poly(ethylene terephthalate) (PET) is a prospective way for degradation of PET to its monomer bis(hydroxyethyl) terephthalate (BHET), providing the possibility for a permanent loop recycling. However, most reported glycolysis catalysts are homogeneous, making the catalyst difficult to recover and contaminating the products. Herein, we reported on the Pd-Cu/γ-Al 2 O 3 catalyst and applied it in the glycolysis of PET as catalyst. The formed structure gave Pd-Cu/γ-Al 2 O 3 a high active surface area, which enabled these micro-particles to work more efficiently. The PET conversion and BHET yield reached 99% and 86%, respectively, in the presence of 5 wt% of Pd-Cu/γ-Al 2 O 3 catalyst within 80 min at 160 °C. After the reaction, the catalyst can be quickly separated by filtration, so it can be easily reused without significant loss of reactivity at least five times. Therefore, the Pd-Cu/γ-Al 2 O 3 catalyst may contribute to an economically and environmentally improved large-scale recycling of PET fiber waste.

To explore the effects of altered amino acids (AAs) and the carnitine metabolism in non-pregnant women with infertility (NPWI), pregnant women without infertility (PWI) and infertility-treated pregnant women (ITPW) compared with non-pregnant women (NPW, control), and develop more efficient models for the diagnosis of infertility and pregnancy, 496 samples were evaluated for levels of 21 AAs and 55 carnitines using targeted high-performance liquid chromatography with tandem mass spectrometry (HPLC-MS/MS). Three methods were used to screen the biomarkers for modeling, with eight algorithms used to build and validate the model. The ROC, sensitivity, specificity, and accuracy of the infertility diagnosis training model were higher than 0.956, 82.89, 66.64, and 82.57%, respectively, whereas those of the validated model were higher than 0.896, 77.67, 69.72, and 83.38%, respectively. The ROC, sensitivity, specificity, and accuracy of the pregnancy diagnosis training model were >0.994, 96.23, 97.79, and 97.69%, respectively, whereas those of the validated model were >0.572, 96.39, 93.03, and 94.71%, respectively. Our findings indicate that pregnancy may alter the AA and carnitine metabolism in women with infertility to match the internal environment of PWI. The developed model demonstrated good performance and high sensitivity for facilitating infertility and pregnancy diagnosis.

Conventional pulp capping materials have limited anti-inflammatory capacity. It is necessary to develop more effective pulp capping material for the treatment of inflamed pulps. Tannic acid (TA) is a natural, water-soluble polyphenol with antimicrobial and anti-inflammatory properties. This study aimed to investigate the effects of a tannin-containing hydroxypropyl chitin hydrogel (HPCH/TA hydrogel) as an innovative pulp capping material. The physicochemical properties of the composite hydrogels were characterized. The effects of HPCH/TA hydrogel as a pulp capping material were evaluated in vitro and in vivo. The underlying mechanism of the anti-inflammatory effects of HPCH/TA hydrogel was explored. The HPCH/TA hydrogel demonstrated favorable temperature sensitivity, injectability, and antibacterial properties. In vitro, the HPCH/TA hydrogel effectively promoted the proliferation of human dental pulp cells and inhibited interleukin-1β, interleukin-6, and tumor necrosis factor-α expression, possibly by suppressing the nuclear factor kappa-B pathway. In vivo, on the fourth day after capping, the HPCH/TA hydrogel group showed lower inflammatory scores compared to the control and iRoot BP Plus (commercial pulp capping material) group. By the sixth week, complete reparative dentin formation was observed in the HPCH/TA hydrogel group, with no difference in thickness compared to the iRoot BP Plus group. Collectively, the HPCH/TA hydrogel holds promise as a bioactive pulp capping material for promoting the repair of inflamed pulp in vital pulp therapy.

Aluminum-activated malate transporter ( ALMT ) genes play an important role in aluminum ion (Al 3+ ) tolerance, fruit acidity, and stomatal movement. Although decades of research have been carried out in many plants, there is little knowledge about the roles of ALMT in Orchidaceae. In this study, 34 ALMT genes were identified in the genomes of four orchid species. Specifically, ten ALMT genes were found in Dendrobium chrysotoxum and D. catenatum , and seven were found in Apostasia shenzhenica and Phalaenopsis equestris . These ALMT genes were further categorized into four clades (clades 1-4) based on phylogenetic relationships. Sequence alignment and conserved motif analysis revealed that most orchid ALMT proteins contain conserved regions (TM1, GABA binding motif, and WEP motif). We also discovered a unique motif (19) belonging to clade 1, which can serve as a specifically identified characteristic. Comparison with the gene structure of AtALMT genes ( Arabidopsis thaliana ) showed that the gene structure of ALMT was conserved across species, but the introns were longer in orchids. The promoters of orchid ALMT genes contain many light-responsive and hormone-responsive elements, suggesting that their expression may be regulated by light and phytohormones. Chromosomal localization and collinear analysis of D. chrysotoxum indicated that tandem duplication (TD) is the main reason for the difference in the number of ALMT genes in these orchids. D. catenatum was chosen for the RT-qPCR experiment, and the results showed that the DcaALMT gene expression pattern varied in different tissues. The expression of DcaALMT1-9 was significantly changed after ABA treatment. Combining the circadian CO 2 uptake rate, titratable total acid, and RT-qPCR data analysis, most DcaALMT genes were highly expressed at night and around dawn. The result revealed that DcaALMT genes might be involved in photosynthate accumulation. The above study provides more comprehensive information for the ALMT gene family in Orchidaceae and a basis for subsequent functional analysis.

An important family of transcription factors (TFs) in plants known as NAC (NAM, ATAF1/2, and CUC2) is crucial for the responses of plants to environmental stressors. In this study, we mined the NAC TF family members of tree peony ( Paeonia suffruticosa Andrews) from genome-wide data and analyzed their response to heat and waterlogging stresses in conjunction with transcriptome data. Based on tree peony's genomic information, a total of 48 PsNAC genes were discovered. Based on how similar their protein sequences were, these PsNAC genes were divided into 14 branches. While the gene structures and conserved protein motifs of the PsNAC genes within each branch were largely the same, the cis-acting elements in the promoter region varied significantly. Transcriptome data revealed the presence of five PsNAC genes ( PsNAC06 , PsNAC23 , PsNAC38 , PsNAC41 , PsNAC47 ) and one PsNAC gene ( PsNAC37 ) in response to heat and waterlogging stresses, respectively. qRT-PCR analysis reconfirmed the response of these five PsNAC genes to heat stress and one PsNAC gene to waterlogging stress. This study lays a foundation for the study of the functions and regulatory mechanisms of NAC TFs in tree peony. Meanwhile, the NAC TFs of tree peony in response to heat and waterlogging stress were excavated, which is of great significance for the selection and breeding of new tree peony varieties with strong heat and waterlogging tolerance.

Zirconium alloys possess excellent wear resistance, which ensures the durability and longevity of the components, making them widely used in medical and other fields. To enhance the functionality of these materials, it is often necessary to fabricate functional microstructures on their surfaces. Electrochemical machining (ECM) techniques demonstrate excellent machining performance for these metals, particularly in the processing of microstructures on complex curved surfaces. However, ECM often faces challenges due to the fluid nature of the electrolyte, resulting in low machining accuracy and localization. This paper proposes a novel method for fabricating complex patterned microstructures using a maskless electrochemical direct writing technique with a polyacrylamide (PAM) polymer electrolyte. By leveraging the non-Newtonian properties of PAM, this method effectively confines the electrolyte to specific areas, thus addressing the issue of poor localization in traditional ECM and reducing stray corrosion. To elucidate the electrochemical removal mechanism of Zr702 in the presence of PAM, polarization curves, viscosity characteristics, and current efficiency parameters were analyzed. Additionally, an experimental study was conducted using a custom-designed nozzle structure. The results showed that the PAM electrolyte could effectively reduce the EF, positively impacting machining accuracy and localization. By controlling the nozzle's motion trajectory, complex microstructures were successfully fabricated through direct writing, demonstrating promising application prospects.

Cotton aphids ( Aphis gossypii Glover) cause harm by feeding on phloem sap and spreading plant viruses to lily. Understanding the mechanisms by which aphids infest lily plants is crucial for effective aphid management and control. In this study, we investigated the activity of antioxidants, integrated nontargeted metabolomes and transcriptomes of lilies infested by cotton aphids to explore the changes in lily leaves. Overall, the results indicated that the catalase (CAT) activity in the leaves of the lily plants was greater than that in the leaves of the control plants. A comprehensive identification of 604 substances was conducted in the leaves. Furthermore, the differentially abundant metabolite analysis revealed the enrichment of phenylalanine metabolism and α-linolenic acid metabolism. Moreover, 3574 differentially expressed genes (DEGs), whose expression tended to increase, were linked to glutathione metabolism and phenylpropanoid biosynthesis. In addition, the integrated analysis revealed that the defensive response of lily leaves to aphids is manifested through antioxidant reactions, phenylpropane and flavonoid biosynthesis, and α-linolenic acid metabolism. Finally, the key metabolites were CAT, glutathione, coumaric acid, and jasmonic acid, along with the key genes chalcone synthase ( CHS ), phenylalanine ammonia-lyase ( PAL ), and 12-oxo-phytodienoic acid reductase ( OPR ). Accordingly, the findings of this research elucidate the molecular and metabolic reactions of A. gossypii in lily plants, offering valuable insights for developing aphid resistance strategies in lily farming.

Triglycerides are the main storage form of oil in plant seeds. Both fatty acids and triglycerides possess important functions in the process of plant growth and development. To improve the seed oil content and improve its fatty acid composition, this paper analyzed the research progress on the oil regulation and synthesis metabolism process of plant seeds and summarized the strategies for the improvement of plant seed oil: (a) To regulate carbon distribution by inhibiting the expression of genes encoding key enzymes, allocating carbon sources into the protein synthesis pathway, and enhancing the expression of key genes encoding key enzymes, leading carbon sources into the synthesis pathway of fatty acids; (b) To intervene in lipid synthesis by promoting the biosynthesis of fatty acids and improving the expression level of key genes encoding enzymes in the triacylglycerol (TAG) assembly process; (c) To improve seed oil quality by altering the plant fatty acid composition and regulating the gene expression of fatty acid desaturase, as well as introducing an exogenous synthesis pathway of long chain polyunsaturated fatty acids; (d) To regulate the expression of transcription factors for lipid synthesis metabolism to increase the seed oil content. In addition, this article reviews the key enzymes involved in the biosynthesis of plant fatty acids, the synthesis of triacylglycerol, and the regulation process. It also summarizes the regulatory roles of transcription factors such as WRI , LEC , and Dof on the key enzymes during the synthesis process. This review holds significant implications for research on the genetic engineering applications in plant seed lipid metabolism.

The modulation of electrical properties in composite materials is critical for applications requiring tailored electrical functionality, such as electromagnetic shielding and absorption. This study focuses on Ti64/B 4 C composites, a material combination promising enhanced electromagnetic properties. Laser direct manufacturing (LDM) was utilized to fabricate coaxial samples of Ti64 blended with TiB and TiC in various mass ratios, with sample thicknesses ranging from 0.5 mm to 3.5 mm. The electrical characterization involved assessing the dielectric and magnetic permeability, as well as impedance and reflectance, across a frequency spectrum of 2 to 18 GHz. The result reveals that TiC, when incorporated into Ti64, exhibits strong dielectric polarization and achieves a reflectivity as low as -40 dB between 7 and 14 GHz. Conversely, TiB demonstrates effective electromagnetic absorption, with reflectivity values below -10 dB in the frequency band of 8.5 to 11.5 GHz. The study also notes that a lower B 4 C content enhances electronic polarization and increases the dielectric coefficient, while higher contents favor ionic polarization. This shift can lead to a timing mismatch in the establishment of electron and ion polarization, resulting in a decreased dielectric coefficient. In addition, adjusting the B 4 C content in Ti64/B 4 C composites effectively modulates their electrical properties, suggesting a strategic approach to designing materials for specific electromagnetic functions.

Guangdong Province, home to 21 cities and a permanent population of 127.06 million people, boasts the largest provincial economy in China, contributing 11.76% to the national GDP in 2023. However, it is prone to geological hazards due to its geological conditions, extreme weather, and extensive human activities. Geohazards not only endanger lives but also hinder regional economic development. Monitoring surface deformation regularly can promptly detect geological hazards and allow for effective mitigation strategies. Traditional ground subsidence monitoring methods are insufficient for comprehensive surveys and rapid monitoring of geological hazards in the whole province. Interferometric Synthetic Aperture Radar (InSAR) technology using satellite images can achieve wide-area geohazard monitoring. However, current geological hazard monitoring in Guangdong Province based on InSAR technology lacks regional analysis and statistics of surface deformation across the entire province. Furthermore, such monitoring fails to analyze the spatial-temporal characteristics of surface deformation and disaster evolution mechanisms by considering the local geological features. To address these issues, current work utilizes Sentinel-1A/B satellite data covering Guangdong Province from 2015 to 2022 to obtain the wide-area surface deformation in the whole province using the multi-temporal (MT) InSAR technology. Based on the deformation results, a wide-area deformation region automatic identification method is used to identify the surface deformation regions and count the deformation area in each city of Guangdong Province. By analyzing the results, we obtained the following findings: (1) Using the automatic identification algorithm we identified 2394 deformation regions. (2) Surface subsidence is concentrated in the delta regions and reclamation areas; over a 4 cm/year subsidence rate is observed in the hilly regions of northern Guangdong, particularly in mining areas. (3) Surface deformation is closely related to geological structures and human activities. (4) Sentinel-1 satellite C-band imagery is highly effective for wide-area geological hazard monitoring, but has limitations in monitoring small-area geological hazards. In the future, combining the high-spatial-temporal-resolution L-band imagery from the NISAR satellite with Sentinel-1 imagery will allow for comprehensive monitoring and early warning of geological hazards, achieving multiple geometric and platform perspectives for geological hazard monitoring and management in Guangdong Province. The findings of this study have significant reference value for the monitoring and management of geological disasters in Guangdong Province.

This work primarily reviewed the response mechanism of fluorescent probes for H 2 S detection in foodstuffs in recent years, as well as the methodologies employed for detecting foodstuffs. Firstly, the significance of studying H 2 S gas as an important signaling molecule is introduced. Subsequently, a review of the response mechanism of the scientific community on how to detect H 2 S in foodstuffs samples by fluorescent probe technology is carried out. Secondly, the methods commonly used for detecting foodstuffs samples are discussed, including the test strip method and the spiking recovery methods. Nevertheless, despite the significant advancements in this field, there remain some research gaps. Finally, the article identifies the remaining issues that require further attention in current research and proposes avenues for future investigation. More importantly, this work identifies the current limitations of research in this field and proposes future applications of fluorescent probes for H 2 S in assessing food freshness and determining food spoilage. Therefore, this review will provide robust technical support for the protection of consumer health and the advancement of the sustainable development of the food industry and also put forward some new ideas and suggestions for future research.

The electrochemical conversion of glycerol into high-value chemicals through the selective glycerol oxidation reaction (GOR) holds importance in utilizing the surplus platform chemical component of glycerol. Nevertheless, it is still very limited in producing three-carbon chain (C 3 ) chemicals, especially glyceric acid/glycerate, through the direct oxidation of its primary hydroxyl group. Herein, Pd microstructure electrodeposited on the Ni foam support (Pd/NF) is designed and fabricated to achieve a highly efficient GOR, exhibiting a superior current density of ca. 120 mA cm -2 at 0.8 V vs. reversible hydrogen electrode (RHE), and high selectivity of glycerate at ca. 70%. The Faradaic efficiency of C 3 chemicals from GOR can still be maintained at ca. 80% after 20 continuous electrolysis runs, and the conversion rate of glycerol can reach 95% after 10-h electrolysis. It is also clarified that the dual-component interfaces constructed by the adjacent Pd and Ni sites are responsible for this highly efficient GOR. Specifically, Ni sites can effectively strengthen the generative capacity of the active adsorbed hydroxyl (OH ad ) species, which can steadily immigrate to the Pd sites, so that the surface adsorbed glycerol species are quickly oxidized into C 3 chemicals, rather than breaking the C-C bond of glycerol; thus, neither form the C 2 /C 1 species. This study may yield fresh perspectives on the electrocatalytic conversion of glycerol into high-value C 3 chemicals, such as glyceric acid/glycerate.

Positioned at the dynamic interface between terrestrial and marine realms, mangroves embody a vibrant tapestry of biodiversity, encompassing an array of plants, animals, and microorganisms. These microbial inhabitants of mangrove habitats have emerged as a pivotal resource for antimicrobials and a plethora of pharmaceutically valuable compounds, spanning enzymes, antineoplastic agents, pesticides, immunosuppressants, and immunomodulators. This review delves into the recent landscape (January 2021 to May 2024, according to the time of publication) of novel secondary metabolites isolated from mangrove-associated microorganisms, analyzing 41 microbial strains that collectively yielded 165 distinct compounds. Our objective is to assess the productivity and potential of natural products derived from microbial populations within mangrove ecosystems in recent times. Notably, fungi stand out as the preeminent contributors to the emergence of these novel natural products, underscoring their pivotal role in the bioprospecting endeavors within these unique environments., Competing Interests: The authors declare no conflicts of interest.

The inhibition of dipeptidyl peptidase-IV (DPP-IV) is a promising approach for regulating the blood glucose levels in patients with type 2 diabetes (T2D). Oysters, rich in functional peptides, contain peptides capable of inhibiting DPP-IV activity. This study aims to identify the hypoglycemic peptides from oysters and investigate their potential anti-T2D targets and mechanisms. This research utilized virtual screening for the peptide selection, followed by in vitro DPP-IV activity assays to validate the chosen peptide. Network pharmacology was employed to identify the potential targets, GO terms, and KEGG pathways. Molecular docking and molecular dynamics simulations were used to provide virtual confirmation. The virtual screening identified LRGFGNPPT as the most promising peptide among the screened oyster peptides. The in vitro studies confirmed its inhibitory effect on DPP-IV activity. Network pharmacology revealed that LRGFGNPPT exerts an anti-T2D effect through multiple targets and signaling pathways. The key hub targets are AKT1, ACE, and REN. Additionally, the molecular docking results showed that LRGFGNPPT exhibited a strong binding affinity with targets like AKT1, ACE, and REN, which was further confirmed by the molecular dynamics simulations showcasing a stable peptide-target interaction. This study highlights the potential of LRGFGNPPT as a natural anti-T2D peptide, providing valuable insights for potential future pharmaceutical or dietary interventions in T2D management.

Four new polyketides, namely furantides A-B ( 1 - 2 ), talamin E ( 3 ) and arugosinacid A ( 4 ), and two known polyketides were obtained from the mangrove-derived fungus Penicillium sp. HDN15-312 using the One Strain Many Compounds (OSMAC) strategy. Their chemical structures, including configurations, were elucidated by detailed analysis of extensive NMR spectra, HRESIMS and ECD. The DPPH radicals scavenging activity of 3 , with an IC 50 value of 6.79 µM, was better than vitamin C.

Cardiovascular diseases pose a significant public health challenge globally, necessitating the development of effective treatments to mitigate the risk of cardiovascular diseases. Recently, circular RNAs (circRNAs), a novel class of non-coding RNAs, have been recognized for their role in cardiovascular disease. Aberrant expression of circRNAs is closely linked with changes in various cellular and pathophysiological processes within the cardiovascular system, including metabolism, proliferation, stress response, and cell death. Functionally, circRNAs serve multiple roles, such as acting as a microRNA sponge, providing scaffolds for proteins, and participating in protein translation. Owing to their unique properties, circRNAs may represent a promising biomarker for predicting disease progression and a potential target for cardiovascular drug development. This review comprehensively examines the properties, biogenesis, and potential mechanisms of circRNAs, enhancing understanding of their role in the pathophysiological processes impacting cardiovascular disease. Furthermore, the prospective clinical applications of circRNAs in the diagnosis, prognosis, and treatment of cardiovascular disease are addressed., Competing Interests: The authors declare no conflicts of interest.

Plants communicate underground by secreting multiple amino acids (AAs) through their roots, triggering defense mechanisms against cadmium (Cd) stress. However, the specific roles of the individual AAs in Cd translocation and detoxification remain unclear. This study investigated how exogenous AAs influence Cd movement from the roots to the shoots in Cd-resistant and Cd-sensitive Chinese cabbage cultivars (Jingcui 60 and 16-7 cultivars). The results showed that methionine (Met) and cysteine (Cys) reduced Cd concentrations in the shoots of Jingcui 60 by approximately 44% and 52%, and in 16-7 by approximately 43% and 32%, respectively, compared to plants treated with Cd alone. However, threonine (Thr) and aspartic acid (Asp) did not show similar effects. Subcellular Cd distribution analysis revealed that AA supplementation increased Cd uptake in the roots, with Jingcui 60 preferentially storing more Cd in the cell wall, whereas the 16-7 cultivar exhibited higher Cd concentrations in the organelles. Moreover, Met and Cys promoted the formation of Cd-phosphate in the roots of Jingcui 60 and Cd-oxalate in the 16-7 cultivar, respectively. Further analysis showed that exogenous Cys inhibited Cd transport to the xylem by downregulating the expression of HMA2 in the roots of both cultivars, and HMA4 in the 16-7 cultivar. These findings provide insights into the influence of exogenous AAs on Cd partitioning and detoxification in Chinese cabbage plants.

Background: Cognitive impairment is common in patients with Parkinson's disease (PD) and occurs through multiple mechanisms, including Alzheimer's disease (AD) pathology and the involvement of α-synucleinopathies. We aimed to investigate the pathological biomarkers of both PD and AD in plasma and neuronal extracellular vesicles (EVs) and their association with different types of cognitive impairment in PD patients., Methods: A total of 122 patients with PD and 30 healthy controls were included in this cross-sectional cohort study between March 2021 and July 2023. Non-dementia PD patients were divided into amnestic and non-amnestic groups according to the memory domain of a neuropsychological assessment. Plasma and neuronal EV biomarkers, including α-synuclein (α-syn), beta-amyloid (Aβ), total tau (T-tau), phosphorylated tau181 (p-tau181), and glial fibrillary acidic protein (GFAP), were measured using a single-molecule array and a chemiluminescence immunoassay, respectively., Results: Neuronal EV but not plasma α-syn levels, were significantly increased in PD as compared to healthy controls, and they were positively associated with UPDRS part III scores and the severity of cognitive impairment. A lower plasma Aβ42 level and higher neuronal EV T-tau level were found in the amnestic PD group compared to the non-amnestic PD group., Conclusions: The results of the current study demonstrate that neuronal EV α-syn levels can be a sensitive biomarker for assisting in the diagnosis and disease severity prediction of PD. Both AD and PD pathologies are important factors in cognitive impairment associated with PD, and AD pathologies are more involved in amnestic memory deficit in PD.

A novel AgCuTi brazing foil with a unique microstructure was developed, which could achieve strong vacuum brazing of Ti6Al4V (TC4) and sapphire. The brazing foil was composed of Ag solid solution (Ag(s,s)), Cu solid solution (Cu(s,s)), and layered Ti-rich phases, and had a low liquidus temperature of 790 °C and a narrow melting range of 16 °C, facilitating the defect-free joining of TC4 and sapphire. The sapphire/TC4 joint fabricated by using this novel AgCuTi brazing foil exhibited an outstanding average shear strength of up to 132.2 MPa, which was the highest value ever reported. The sapphire/TC4 joint had a characteristic structure, featuring a brazing seam reinforced by TiCu particles and a thin Ti 3 (Cu,Al) 3 O reaction layer of about 1.3 μm. The fracture mechanism of the sapphire/TC4 joint was revealed. The crack originated at the brazing seam with TiCu particles, then propagated through the Ti 3 (Cu,Al) 3 O reaction layer, detached the reaction layer from the sapphire, and finally penetrated into the sapphire. This study offers valuable insights into the design of active brazing alloys and reliable metal-ceramic bonding.

Human physical activity monitoring plays a crucial role in promoting personalized health management. In this work, inspired by an ancient Chinese belt, a belt-type wearable sensor (BWS) based on a triboelectric nanogenerator (TENG) is presented to monitor daily movements and collect the body motion mechanical energy. The developed BWS consists of a soft silicone sheet and systematically connected sensing units made from triboelectric polymer materials including polytetrafluoroethylene (PTFE) and polyamide (PA). A parameter study of the sensing units is firstly conducted to optimize the structure of BWS. The experimental studies indicate that the parameter-optimized BWS unit achieves a maximum output voltage of 47 V and a maximum current of 0.17 μA. A BWS with five sensing units is manufactured to record body movements, and it is able to distinguish different physical activities including stillness, walking, running, jumping, normal breathing, cessation of breathing, and deep breathing. In addition, the developed BWS successfully powers electronic devices including a smartphone, digital watch, and LED lights. We hope this work provides a new strategy for the development of wearable self-powered intelligent devices.

Sorghum is an important C 4 crop with various food and nonfood uses. Although improvements through hybridization and selection have been exploited, the introduction of genetic variation and the development of new genotypes in sorghum are still limited. Fast-neutron (FN) mutagenesis is a very effective method for gene functional studies and to create genetic variability. However, the full spectrum of FN-induced mutations in sorghum is poorly understood. To address this, we generated an FN-induced mutant population from the inbred line 'BTx623' and sequenced 40 M 1 seedlings to evaluate the mutagenic effects of FNs on sorghum. The results show that each line had an average of 43.7 single-base substitutions (SBSs), 3.7 InDels and 35.15 structural variations (SVs). SBSs accounted for approximately 90.0% of the total number of small mutations. Among the eight treatment groups, FN irradiation at a dose of 19 Gy generated the highest number of mutations. The ratio of transition/transversion ranged from 1.77 to 2.21, and the G/C to A/T transition was the most common substitution in all mutant lines. The distributions of the identified SBSs and InDels were similar and uneven across the genome. An average of 3.63 genes were mutated in each mutant line, indicating that FN irradiation resulted in a suitable density of mutated genes, which can be advantageous for improving elite material for one specific or a few traits. These results provide a basis for the selection of the suitable dose of mutagen and new genetic resources for sorghum breeding.

Developing reusable and easy-to-operate biocatalysts is of significant interest in biodiesel production. Here, magnetic whole-cell catalysts constructed through immobilizing recombinant Escherichia coli cells (containing MAS1 lipase) into Fe 3 O 4 -chitosan magnetic microspheres (termed MWCC@MAS1) were used for fatty acid methyl ester (FAME) production from waste cooking oil (WCO). During the preparation process of immobilized cells, the effects of chitosan concentration and cell concentration on their activity and activity recovery were investigated. Optimal immobilization was achieved with 3% ( w / v ) chitosan solution and 10 mg wet cell/mL cell suspension. Magnetic immobilization endowed the whole-cell catalysts with superparamagnetism and improved their methanol tolerance, enhancing the recyclability of the biocatalysts. Additionally, we studied the effects of catalyst loading, water content, methanol content, and reaction temperature on FAME yield, optimizing these parameters using response surface methodology and Box-Behnken design. An experimental FAME yield of 89.19% was gained under the optimized conditions (3.9 wt% catalyst loading, 22.3% ( v / w ) water content, 23.0% ( v / w ) methanol content, and 32 °C) for 48 h. MWCC@MAS1 demonstrated superior recyclability compared to its whole-cell form, maintaining about 86% of its initial productivity after 10 cycles, whereas the whole-cell form lost nearly half after just five cycles. These results suggest that MWCC@MAS1 has great potential for the industrial production of biodiesel.

Neuroinflammation is one of the main mechanisms involved in the progression of neurodegenerative diseases (NDs), and microglial activation is the main feature of neuroinflammation. Polaprezinc (Pol), a chelator of L-carnosine and zinc, is widely used as a clinical drug for gastric ulcers. However, its potential effects on NDs remain unexplored. In LPS-induced BV-2 microglia, we found that Pol reduced the generation of NO and ROS and revealed inhibited expression of iNOS, COX-2, and inflammatory factors such as IL-6, TNF-α, and 1L-1β by Pol using qRT-PCR and Western blotting. These effects were found to be associated with the suppression of the NF-κB signaling pathway. Moreover, we evaluated the potential synergistic effects of aspergillusidone G (Asp G) when combined with Pol. Remarkably, co-treatment with low doses of Asp G enhanced the NO inhibition by Pol from approximately 30% to 80% in LPS-induced BV2 microglia, indicating a synergistic anti-inflammatory effect. A bioinformatics analysis suggested that the synergistic mechanism of Asp G and Pol might be attributed to several targets, including NFκB1, NRF2, ABL1, TLR4, and PPARα. These findings highlight the anti-neuroinflammatory properties of Pol and its enhanced efficacy when combined with Asp G, proposing a novel therapeutic strategy for managing neuroinflammation in NDs.

Promoting appropriate behaviors in early childhood is crucial for children's future development. This systematic review aimed to explore the efficacy of social story (SS) intervention in teaching expected behaviors among preschool children. A structured search strategy was applied to five online electronic databases. The references were systematically screened in accordance with the PRISMA statements. Randomized or non-randomized controlled studies, as well as single-subject studies, in which SSs served as a behavioral training approach for children aged 2 to 6 years were included. Information related to study design, characteristics of the participants, target behaviors, and implementation of SS intervention was extracted. A meta-analysis was performed using the random-effects model, where similar outcomes were evaluated by similar intervention across multiple studies. Twenty-one studies were identified for qualitative analysis, while two studies formed the basis of the meta-analysis. SS interventions were employed to teach a variety of behaviors among typically developing children as well as those with various disabilities, such as autism, developmental delay, hearing impairments, attention deficit hyperactivity disorder, or other disabilities. The target behaviors included oral health practices, peer interaction, staying on-task, self-regulation, sleep habits, and controlling aggressive behavior during group activities. The SSs were used either alone or combined with other strategies, such as positive reinforcement, music therapy, role play, group discussion, video self-modeling, immediate practices, or additional audio commentary. Most studies reported improvements in appropriate behaviors and/or reductions in unfavorable behaviors. The meta-analysis indicated that children practiced more toothbrushing steps when using SS interventions compared to conventional oral health instruction (Z = 3.60, MD = 0.66, 95%CI 0.30 to 1.02, p < 0.001). SS interventions have the potential to teach target behaviors, particularly toothbrushing behaviors, among preschool children. More well-designed randomized controlled trials are warranted to determine the efficacy of SS interventions among children with various developmental profiles.

Plants of the Meliaceae family have long attracted researchers' interest due to their various insecticidal activities, with triterpenes being the main active ingredients. In this paper, we discuss 93 triterpenoids with insecticidal activity from 37 insecticidal plant species of 15 genera ( Munronia , Neobeguea , Pseudocedrela , Nymania , Quivisia , Ruagea , Dysoxylum , Soymida , Lansium , Sandoricum , Walsura , Trichilia , Swietenia , Turraea , and Xylocarpus ) in the family Meliaceae. Among these genera, Trichilia deserves further research, with twelve species possessing insecticidal activity. The 93 insecticidal molecules included 27 ring-seco limonoids (comprising 1 ring A-seco group chemical, 1 ring B-seco group chemical, 5 ring D-seco group chemicals, 14 rings A,B-seco group chemicals, 5 rings B,D-seco group chemicals, and 1 rings A,B,D-seco group chemical), 22 ring-intact limonoids (comprising 5 cedrelone-class chemicals, 6 trichilin-class chemicals, 7 havanensin-class chemicals, 2 azadirone-class chemicals, 1 vilasinin-class chemical, and 1 other chemical), 33 2,30-linkage chemicals (comprising 25 mexicanolide-class chemicals and 8 phragmalin-class chemicals), 3 1,n-linkage-group chemicals, 3 onoceranoid-type triterpenoids, 2 apotirucallane-type terpenoids, 2 kokosanolide-type tetranortriterpenoids, and 1 cycloartane triterpene. In particular, 59 molecules showed antifeedant activity, 30 molecules exhibited poisonous effects, and 9 molecules possessed growth regulatory activity. Particularly, khayasin, beddomei lactone, 3β,24,25-trihydroxycycloartane, humilinolides A-E and methyl-2-hydroxy-3β-isobutyroxy-1-oxomeliac-8(30)-enate showed excellent insecticidal activities, which were comparable to that of azadirachtin and thus deserved more attention. Moreover, it was noteworthy that various chemicals (such as 12α-diacetoxywalsuranolide, 11β,12α-diacetoxycedrelone, 1α,7α,12α-triacetoxy-4α-carbomethoxy-11β-hydroxy-14β,15β-epoxyhavanensin, and 11-epi-21-hydroxytoonacilide, etc.) from Turraea showed excellent insecticidal activity. Specially, the insecticidal activity of khayasin from Neobeguea against the coconut leaf beetle were similar to that of rotenone. Therefore, it was a promising candidate insecticide for the control of the coconut leaf beetle.

Gastrodin (GAS) is the main chemical component of the traditional Chinese herb Gastrodia elata (called "Tianma" in Chinese), which has been used to treat neurological conditions, including headaches, epilepsy, stroke, and memory loss. To our knowledge, it is unclear whether GAS has a therapeutic effect on Huntington's disease (HD). In the present study, we evaluated the effect of GAS on the degradation of mutant huntingtin protein (mHtt) by using PC12 cells transfected with N-terminal mHtt Q74. We found that 0.1-100 μM GAS had no effect on the survival rate of Q23 and Q74 PC12 cells after 24-48 h of incubation. The ubiquitin-proteasome system (UPS) is the main system that clears misfolded proteins in eukaryotic cells. Mutated Htt significantly upregulated total ubiquitinated protein (Ub) expression, decreased chymotrypsin-like, trypsin-like and caspase-like peptidase activity, and reduced the colocalization of the 20S proteasome with mHtt. GAS (25 μM) attenuated all of the abovementioned pathological changes, and the regulatory effect of GAS on mHtt was found to be abolished by MG132, a proteasome inhibitor. The autophagy-lysosome pathway (ALP) is another system for misfolded protein degradation. Although GAS downregulated the expression of autophagy markers (LC3II and P62), it increased the colocalization of LC3II with lysosomal associated membrane protein 1 (LAMP1), which indicates that ALP was activated. Moreover, GAS prevented mHtt-induced neuronal damage in PC12 cells. GAS has a selective effect on mHtt in Q74 PC12 cells and has no effect on Q23 and proteins encoded by other genes containing long CAGs, such as Rbm33 (10 CAG repeats) and Hcn1 (>30 CAG repeats). Furthermore, oral administration of 100 mg/kg GAS increased grip strength and attenuated mHtt aggregates in B6-hHTT130-N transgenic mice. This is a high dose (100 mg/kg GAS) when compared with experiments on HD mice with other small molecules. We will design more doses to evaluate the dose-response relationship of the inhibition effect of GAS on mHtt in our next study. In summary, GAS can promote the degradation of mHtt by activating the UPS and ALP, making it a potential therapeutic agent for HD.

Oil palm ( Elaeis guineensis Jacq.) is a typical tropical oil crop with a temperature of 26-28 °C, providing approximately 35% of the total world's vegetable oil. Growth and productivity are significantly affected by low-temperature stress, resulting in inhibited growth and substantial yield losses. To comprehend the intricate molecular mechanisms underlying the response and acclimation of oil palm under low-temperature stress, multi-omics approaches, including metabolomics, proteomics, and transcriptomics, have emerged as powerful tools. This comprehensive review aims to provide an in-depth analysis of recent advancements in multi-omics studies on oil palm under low-temperature stress, including the key findings from omics-based research, highlighting changes in metabolite profiles, protein expression, and gene transcription, as well as including the potential of integrating multi-omics data to reveal novel insights into the molecular networks and regulatory pathways involved in the response to low-temperature stress. This review also emphasizes the challenges and prospects of multi-omics approaches in oil palm research, providing a roadmap for future investigations. Overall, a better understanding of the molecular basis of the response of oil palm to low-temperature stress will facilitate the development of effective breeding and biotechnological strategies to improve the crop's resilience and productivity in changing climate scenarios.

Background: As an important part of the tongue, the tongue coating is closely associated with different disorders and has major diagnostic benefits. This study aims to construct a neural network model that can perform complex tongue coating segmentation. This addresses the issue of tongue coating segmentation in intelligent tongue diagnosis automation., Method: This work proposes an improved TransUNet to segment the tongue coating. We introduced a transformer as a self-attention mechanism to capture the semantic information in the high-level features of the encoder. At the same time, the subtraction feature pyramid (SFP) and visual regional enhancer (VRE) were constructed to minimize the redundant information transmitted by skip connections and improve the spatial detail information in the low-level features of the encoder., Results: Comparative and ablation experimental findings indicate that our model has an accuracy of 96.36%, a precision of 96.26%, a dice of 96.76%, a recall of 97.43%, and an IoU of 93.81%. Unlike the reference model, our model achieves the best segmentation effect., Conclusion: The improved TransUNet proposed here can achieve precise segmentation of complex tongue images. This provides an effective technique for the automatic extraction in images of the tongue coating, contributing to the automation and accuracy of tongue diagnosis.

The objective of this research was to create a prognostic model focused on genes related to ubiquitination (UbRGs) for evaluating their clinical significance in head and neck squamous cell carcinoma (HNSCC) patients. The transcriptome expression data of UbRGs were obtained from The Cancer Genome Atlas (TCGA) database, and weighted gene co-expression network analysis (WGCNA) was used to identify specific UbRGs within survival-related hub modules. A multi-gene signature was formulated using LASSO Cox regression analysis. Furthermore, various analyses, including time-related receiver operating characteristics (ROCs), Kaplan-Meier, Cox regression, nomogram prediction, gene set enrichment, co-expression, immune, tumor mutation burden (TMB), and drug sensitivity, were conducted. Ultimately, a prognostic signature consisting of 11 gene pairs for HNSCC was established. The Kaplan-Meier curves indicated significantly improved overall survival (OS) in the low-risk group compared to the high-risk group ( p < 0.001), suggesting its potential as an independent and dependable prognostic factor. Additionally, a nomogram with AUC values of 0.744, 0.852, and 0.861 at 1-, 3-, and 5-year intervals was developed. Infiltration of M2 macrophages was higher in the high-risk group, and the TMB was notably elevated compared to the low-risk group. Several chemotherapy drugs targeting UbRGs were recommended for low-risk and high-risk patients, respectively. The prognostic signature derived from UbRGs can effectively predict prognosis and provide new personalized therapeutic targets for HNSCC.

Structural-colored fabrics have been attracting much attention due to their eco-friendliness, dyelessness, and anti-fading properties. Monodisperse microspheres of metal, metal oxide, and semiconductors are promising materials for creating photonic crystals and structural colors owing to their high refractive indices. Herein, Cu 2 O microspheres were prepared by a two-step reduction method at room temperature; the size of Cu 2 O microspheres was controlled by changing the molar ratio of citrate to Cu 2+ ; and the size of Cu 2 O microspheres was tuned from 275 nm to 190 nm. The Cu 2 O microsphere dispersions were prepared with the monodispersity of Cu 2 O microspheres. Furthermore, the effect of the concentration of Cu 2 O microsphere and poly(butyl acrylate) on the structural color was also evaluated. Finally, the stability of the structural color against friction and bending was also tested. The results demonstrated that the different structural colors of fabrics were achieved by adjusting the size of the Cu 2 O microsphere, and the color fastness of the structural color was improved by using poly(butyl acrylate) as the adhesive.

Both bacteria product flagellin and macrophages are implicated in HIV-1 infection/disease progression. However, the impact of their interaction on HIV-1 infection and the associated mechanisms remain to be determined. We thus examined the effect of the flagellins on HIV-1 infection of primary human macrophages. We observed that the pretreatment of macrophages with the flagellins from the different bacteria significantly inhibited HIV-1 infection. The mechanistic investigation showed that the flagellin treatment of macrophages downregulated the major HIV-1 entry receptors (CD4 and CCR5) and upregulated the CC chemokines (MIP-1α, MIP-1β and RANTES), the ligands of CCR5. These effects of the flagellin could be compromised by a toll-like receptor 5 (TLR5) antagonist. Given the important role of flagellin as a vaccine adjuvant in TLR5 activation-mediated immune regulation and in HIV-1 infection of macrophages, future investigations are necessary to determine the in vivo impact of flagellin-TLR5 interaction on macrophage-mediated innate immunity against HIV-1 infection and the effectiveness of flagellin adjuvant-based vaccines studies.

In this work, a kind of side chain liquid crystalline poly(urethane-acrylate)s was synthesized by free polymerization based on self-made liquid crystalline monomers, and a series of liquid crystalline polyurethane/shape memory polyurethane composite membranes were prepared by electrospinning. The synthesized liquid crystalline poly(urethane-acrylate)s have excellent thermal stability. Due to the regular arrangement of azobenzene on the side chains, polymers can rapidly undergo a photoinduced transition from trans-isomerism to cis-isomerism in THF solution and restore reversible configurational changes under visible light. The composite membranes prepared by electrospinning can also undergo photoinduced deformation within 6 s, and the deformation slowly returns under visible light. Meanwhile, the composites have shape memory, and after deformation caused by stretching, the membranes can quickly recover their original shape under thermal stimulation. These results indicate that the composites have triple response performances of photoinduced deformation, photo-, and thermal recovery.

With the ongoing promotion and adoption of electric vehicles, intelligent and connected technologies have been continuously advancing. Electrical control systems implemented in electric vehicles have emerged as a critical research direction. Various drive-by-wire chassis systems, including drive-by-wire driving and braking systems and steer-by-wire systems, are extensively employed in vehicles. Concurrently, unavoidable issues such as conflicting control system objectives and execution system interference emerge, positioning integrated chassis control as an effective solution to these challenges. This paper proposes a model predictive control-based longitudinal dynamics integrated chassis control system for pure electric commercial vehicles equipped with electro-mechanical brake (EMB) systems, centralized drive, and distributed braking. This system integrates acceleration slip regulation (ASR), a braking force distribution system, an anti-lock braking system (ABS), and a direct yaw moment control system (DYC). This paper first analyzes and models the key components of the vehicle. Then, based on model predictive control (MPC), it develops a controller model for integrated stability with double-layer torque distribution. The required driving and braking torque for each wheel are calculated according to the actual and desired motion states of the vehicle and applied to the corresponding actuators. Finally, the effectiveness of this strategy is verified through simulation results from Matlab/Simulink. The simulation shows that the braking deceleration of the braking condition is increased by 32% on average, and the braking distance is reduced by 15%. The driving condition can enter the smooth driving faster, and the time is reduced by 1.5 s~5 s. The lateral stability parameters are also very much improved compared with the uncontrolled vehicles.