Search

Compared to diesel, liquefied natural gas (LNG), often used as an alternative fuel for marine engines, comes with significant advantages in reducing emissions of particulate matter (PM), SOx, CO2, and other pollutants. Promoting the use of LNG is of great significance for achieving carbon peaking and neutrality worldwide, as well as improving the energy structure. However, compared to diesel engines, medium- and high-speed marine LNG engines may produce higher methane (CH4) emissions and also have nitrogen oxide (NOx) emission issues. For the removal of CH4 and NOx from the exhaust of marine LNG engines, the traditional technical route of combining a methane oxidation catalyst (MOC) and an HN3 selective catalytic reduction system (NH3-SCR) will face problems, such as low conversion efficiency and high operation cost. In view of this, the technology of non-thermal plasma (NTP) combined with CH4-SCR is proposed. However, the synergistic mechanism between NTP and catalysts is still unclear, which limits the optimization of an NTP-CH4-SCR system. This article summarizes the synergistic mechanism of NTP and catalysts in the integrated treatment process of CH4 and NOx, including experimental analysis and numerical simulation. And the relevant impact parameters (such as electrode diameter, electrode shape, electrode material, and barrier material, etc.) of NTP reactor energy optimization are discussed. The work of this paper is of great significance for guiding the high-efficiency removal of CH4 and NOx for an NTP-CH4-SCR system. [ABSTRACT FROM AUTHOR]

Promoting the use of solar energy resources has always involved the challenges of instability and supply–demand mismatch. The key to solving these issues is to efficiently store and utilize solar energy resources using high-performance heat storage devices. This study designed a high-performance shell-and-tube phase-change thermal storage device and established a numerical model using ANSYS software to summarize the device's dynamic melting law. To verify the accuracy of the numerical simulation, a performance testing platform for the phase-change thermal storage device was built to investigate the impact of various factors, such as the inlet water temperature, inlet water flow rate, type of heat storage, and initial temperature of the device, and to reveal the change law of the device's performance. The results show that the inlet water temperature has the most significant impact on the device's heat storage and release performance. When the device's heat storage or release is used for heating, changing the inlet water flow rate has a weak and limited effect on the device's performance. However, when the device's heat release is used to provide domestic hot water, increasing the make-up water temperature and reducing the inlet water flow rate can significantly improve the device's effective heat release. Furthermore, based on the experimental validation of the model's correctness, this study further simulated and studied the impact of different factors on the device's heat storage process to optimize its structural design and provide technical references for the device's actual operation and installation. The results show that the placement of fins has a negligible effect on the performance of the heat storage device while reducing the fin spacing and increasing the fin thickness can significantly improve the melting efficiency of the phase-change material (PCM). Additionally, the heat storage characteristics of the device are significantly better in the vertical installation mode than in the horizontal installation mode. This study provides theoretical guidance and technical references for the design and use of phase-change thermal storage devices. [ABSTRACT FROM AUTHOR]

The thermal analysis kinetic method was employed to solve the activation energies of the thermal decomposition reactions of urea and cyanuric acid, with the purpose of understanding the formation of deposits in the diesel engine SCR system. The deposit reaction kinetic model was established by optimizing the reaction paths and reaction kinetic parameters based on the thermal analysis test data of the key components in the deposit. The result shows that the established deposit reaction kinetic model can accurately describe the decomposition process of the key components in the deposit. Compared to the Ebrahimian model, the simulation precision of the established deposit reaction kinetic model is significantly improved above 600 K. The activation energies of the urea and cyanuric acid decomposition reactions are 84 kJ/mol and 152 kJ/mol, respectively, after model parameters identification. The identified activation energies were closest to those of the Friedman one-interval method indicating that the Friedman one-interval method is reasonable to solve the activation energies of deposit reactions. [ABSTRACT FROM AUTHOR]

With the rapid increase in demand for the construction and development of island cities in the South China Sea, the urban heat island phenomenon in such cities should become a key factor to be considered in future urban planning. This paper took Sanya, China as a typical case, and long-term field experiments were conducted in the Mangrove Bay Area in summer and winter. An innovative urban green space cooling model was proposed, using the "green space cooling index" to quantitatively characterize the green space cooling effect, and aiming to minimize the intensity of urban heat islands. This paper studied the optimization method of green space planning and layout under the constraint of a centralized green space total area. Moreover, a genetic algorithm was adopted to optimize the calculation and the layout of the urban green space. The experimental results showed that the urban heat island intensity was more significant at night and was less effective in the daytime during summer. In winter, the urban heat island intensity had a greater effect in the daytime and was less influential at night. Finally, optimization results indicated that the average urban heat island intensity in summer was reduced by 8.8% under the optimal layout urban green space of 0.025 km2. The maximum reduction in heat island intensity occurred at 7:00 am (0.48 °C). When 0.0625 km2 urban green space was planned, the average urban heat island intensity index in summer was reduced to 0.27 °C, with a decrease of 20.5%. [ABSTRACT FROM AUTHOR]

There are still many unsolved mysteries in the thermal decomposition process of urea. This paper studied the thermal decomposition process of urea at constant temperatures by the thermal gravimetric–mass spectrometry analysis method. The results show that there are three obvious stages of mass loss during the thermal decomposition process of urea, which is closely related to the temperature. When the temperature was below 160 °C, urea decomposition almost did not occur, and molten urea evaporated slowly. When the temperature was between 180 and 200 °C, the content of biuret, one of the by-products in the thermal decomposition of urea, reached a maximum. When the temperature was higher than 200 °C, the first stage of mass loss was completed quickly, and urea and biuret rapidly broke down. When the temperature was about 240 °C, there were rarely urea and biuret in residual substance; however, the content of cyanuric acid was still rising. When the temperature was higher than 280°C, there was a second stage of mass loss. In the second stage of mass loss, when the temperature was higher than 330 °C, mass decreased rapidly, which was mainly due to the decomposition of cyanuric acid. When the temperature was higher than 380 °C, the third stage of mass loss occurred. However, when the temperature was higher than 400 °C, and after continuous heating was applied for a sufficiently long time, the residual mass was reduced to almost zero eventually. [ABSTRACT FROM AUTHOR]

To enhance the energy performance of a central air-conditioning system, an effective control method for the chilled water system is always essential. However, it is a real challenge to distribute exact cooling energy to multiple terminal units in different floors via a complex chilled water network. To mitigate hydraulic imbalance in a complex chilled water system, many throttle valves and variable-speed pumps are installed, which are usually regulated by PID-based controllers. Due to the severe hydraulic coupling among the valves and pumps, the hydraulic oscillation phenomena often occur while using those feedback-based controllers. Based on a data-calibrated water distribution model which can accurately predict the hydraulic behaviors of a chilled water system, a new Model Predictive Control (MPC) method is proposed in this study. The proposed method is validated by a real-life chilled water system in a 22-floor hotel. By the proposed method, the valves and pumps can be regulated safely without any hydraulic oscillations. Simultaneously, the hydraulic imbalance among different floors is also eliminated, which can save 23.3% electricity consumption of the pumps. [ABSTRACT FROM AUTHOR]

Promoting energy efficiency (EE) requirements for new residential buildings has been proven to be an effective way to slow down the rapid increase of energy consumption. Its successful implementation relies significantly on the attitudes and participation of various stakeholders within the industry, yet they are normally taken for granted. This paper explores and reports both the consensus among and the diversity of the attitudes of frontline stakeholders toward future EE requirements in the new residential building sector via a nationwide Delphi questionnaire distributed to 29 institutes and 25 experts. Results indicate that promotion of approximately 30% EE every five years until 2030 is suggested and that 20% EE promotion every five years is the most likely to be achieved. In addition, China should progressively adopt the energy intensity index into the current building EE evaluation system. This paper also gives a detailed description of opinions from frontline stakeholders. The findings are expected to help researchers and policymakers better understand the true attitudes of stakeholders, thereby enabling the formation of a proper outlook for new residential building EE promotion. [ABSTRACT FROM AUTHOR]

The energy-efficiency promotion of new residential buildings in China has achieved great progress in the past three decades. However, the expected policy outcomes cannot be fully achieved due to the barriers in the policy-making and implementation process. Whereas governments play a critical role in policy formation, perceptions of stakeholders involved in the building life cycle and the industrial value chain (such as developers, design institutes and relevant material manufactures) are fundamental to the successful implementation. To collect and identify the barriers of significant influence on the industry from stakeholders' perspectives, this paper used a nationwide institutes' questionnaire to collect stakeholders' voices regarding the barriers, the corresponding popularity and the severity. All the barriers were categorized according to institutions' scorings through cluster analysis. The relationships between barriers were also analyzed according to the framework based on policy cycle and policy environment. Results indicated that the core problem is the ineffectiveness translating energy savings into benefits and profits. Accordingly, three major barriers were identified, namely the (1) unsatisfied policy design and implementation; (2) stakeholders' lack of implementation capacity in developing and constructing high-performance new residential building projects and adopting relevant technologies; and (3) insufficient legalization of relevant market. Other identified barriers either were those not agreed by all institutions, or those could be eliminated easily after the removal of the above three barriers. [ABSTRACT FROM AUTHOR]

Nationwide energy efficiency (EE) promotion of new residential buildings is affected by multiple factors regarding policies, markets, technologies, capacities, and economics. The perceived influences of these factors by stakeholders are crucial to the effectiveness evaluation of current policies and the selection of policy instruments. However, they are normally assumed or taken for granted. The knowledge gap between stakeholders' perceptions and research assumptions may lead to researchers' recognition bias. Correspondingly, this paper aims to identify the significant factors, perceived by frontline stakeholders, influencing nationwide EE promotion of new residential buildings before 2020 and 2030. Factors were collected through literature review and their influence were evaluated via Analytical Hierarchy Process based on the data collected in the questionnaires distributed to 32 institutes. The theory of Nested Policy Design Framework and Policy Environment was used to structure the hierarchy and generate policy implications. Results indicate that (1) policy factors are of the greatest influence before 2020 and market perfection factors will have great influences from 2020 to 2030, indicating the transformation of governance arrangement to "market-based" and "network-based" from the current legal-based system; and (2) factors regarding market needs are of significant influence in both terms, revealing the way the transformation should be accomplished. [ABSTRACT FROM AUTHOR]

Simple Summary: With the advancements in diagnosis and treatment technology, the mortality of patients with cancer is gradually decreasing. However, further curbing cancer development requires searching for innovative and more effective drugs. Natural herbal medicine has apparent advantages in R&D and healthcare costs and is attracting increasing attention. Dihydromyricetin is a flavonoid compound with a promising anticancer effect extracted from the stems and leaves of Ampelopsis grossedentata. This paper reviews the different mechanisms of dihydromyricetin alone or in combination with other drugs against a variety of cancers to provide a comprehensive reference for the development of dihydromyricetin as an anticancer therapeutic agent. Dihydromyricetin (DHM) is a natural flavonoid compound extracted from Ampelopsis grossedentata that has been used for centuries in traditional Chinese medicine. DHM has attracted intensive attention due to its numerous beneficial activities, such as hepatoprotection, cardioprotection, antioxidant, and anti-inflammation. In addition, DHM inhibits the progression of cancers such as lung cancer, hepatocellular cancer, breast cancer, melanoma, and malignant reproductive systems through multiple mechanisms, including antiangiogenesis, antiproliferation, apoptosis, and inhibition of invasion and migration. Notably, DHM also activates autophagy at different levels, exerting a dual-regulatory effect on cancers. Mechanistically, DHM can effectively regulate mammalian target of rapamycin (mTOR), noncoding RNA-mediated signaling, phosphatidylinositol 3-kinase (PI3K)/protein kinase B (Akt) pathway, nuclear factor-κB (NF-κB), p53, and endoplasmic reticulum stress (ER stress)-driven signaling in different types of cancers. DHM has also been shown to have inhibitory effects on various regulators that trigger epithelial–mesenchymal transition (EMT). Furthermore, DHM exhibits a remarkable anticancer reversal ability when used in combination with drugs such as adriamycin, nedaplatin, and other drugs. However, the low bioavailability of DHM limits its potential applications, which are improved through structural modification and the exploration of novel dosage forms. Therefore, DHM may become a promising candidate for treating malignancies alone or combined with conventional anticancer strategies used in clinical practice. [ABSTRACT FROM AUTHOR]

As fossil fuels continue to be extracted and used, issues such as environmental pollution and energy scarcity are surfacing. For the transportation industry, the best way to achieve the goal of "carbon neutrality" is to research efficient power systems and develop new alternative fuels. As the world's largest product of chemicals, ammonia is a new renewable fuel with good combustion energy. It can be used as an alternative fuel to reduce carbon emissions because of its proven production process, low production and transportation costs, safe storage, the absence of carbon-containing compounds in its emissions, and its future recyclability. This paper firstly introduces the characteristics of ammonia fuel engine and its problems; then it summarizes the effects of various ammonia-blended fuels on the combustion and emission characteristics of the engine from the combustion problem of ammonia-blended engine; then the fuel storage of ammonia-blended hydrogen is discussed, the feasibility of hydrogen production instead of hydrogen storage is introduced. [ABSTRACT FROM AUTHOR]

For the National VI heavy-duty diesel vehicles, NOx emission regulations are becoming more and more stringent, and the selective catalytic reduction (SCR) system has become a necessary device. The design of the adblue nozzle in the SCR system is especially critical, directly affecting the NOx conversion efficiency and deposit formation. According to the structure of a National VI diesel engine exhaust pipe and SCR system, the nozzle is optimized by computational fluid dynamics (CFD) method to avoid the collision between the urea droplets and the exhaust pipe wall, to ensure that the exhaust gas and the urea droplets are as much as possible in full contact to ensure a sufficient urea pyrolysis. With the optimized nozzle, the NH3 distribution uniformity of the inlet face of the SCR catalyst can increase from 0.58 to 0.92. Additionally, test verifications are implemented based on the spray particle size test and the engine bench tests; the results show that the Sauter mean diameter of the optimized nozzle is more decreased than the initial nozzle and that the NOx conversion efficiency of the World Harmonized Transient Cycle (WHTC) and World Harmonized Stationary Cycle (WHSC) cycle improves by nearly 3%; additionally, it can also avoid deposit formation. [ABSTRACT FROM AUTHOR]