Search

The limited understanding of the structure of the urban surface atmospheric boundary layer can be attributed to its inherent complexity, as well as a deficiency in comprehensive measurements. We analyzed one year of meteorological data and Doppler wind lidar measurements in Beijing to explore how atmospheric stability is influenced by wind speed, radiation, turbulence, and pollution levels. Results indicate that the predominant state of the urban boundary layers in Beijing is an active condition (characterized by strong unstable and unstable stability regimes) throughout the day, attributed to the significant heat storage capacity of the urban canopy. Strong stable regimes are more frequently observed during winter and autumn, peaking during transitions from night to day. Furthermore, both strong unstable and strong stable regimes occur under very weak wind conditions (indicating weak dynamic instability), with strong instability associated with high net radiation levels while strong stability correlates with low net radiation conditions (indicative of robust thermal stability). The unstable regime manifests under strong winds (reflecting strong dynamic instability) alongside moderate net radiation environments, characterized by elevated values of turbulence kinetic energy and urban boundary height, highlighting the critical role of mechanical turbulence generation during periods of high wind activity. Additionally, six instances of pronounced stable conditions observed during daytime can be partially attributed to low radiation coupled with high pollutant concentrations near the surface, resulting from prolonged temperature inversions due to intense radiative cooling effects and weak dynamic forcing. Our findings presented herein are expected to have urban boundary layer climate and environment implications for other cities with high pollution and dense urban infrastructure all over the world. [ABSTRACT FROM AUTHOR]

Many studies have been conducted on air pollution in Ulaanbaatar city. However, most have focused on the sources of pollutants and their characteristics and distribution. Although the location of the city subjects it to unavoidable natural conditions where air pollution accumulates during the cold season, nature-based solutions have not yet been considered in the projects implemented to mitigate air pollution levels. Therefore, this study aims to determine the combined influence of geography and atmospheric factors on cold season air pollution. The spatiotemporal variations in the variables were investigated using meteorological observation data from 1991 to 2020 in the different land-use areas. Then, atmospheric stagnation conditions and air pollution potential parameters were estimated from daily radiosonde data. Subsequently, the temporal variations in air pollutants were studied and correlated with estimates of the above parameters. In the Ulaanbaatar depression, the stable cold air lake (colder than −13.5 °C), windless (34–66% of all observations), and poor turbulent mixing conditions were formed under the near-surface temperature inversion layer in the cold season. Moreover, due to the mountain topography, the winds toward the city center from all sides cause polluted air to accumulate in the city center for long periods. Air pollution potential was categorized as very high and high (<4000 m2·s−1), in the city in winter, indicating the worst air quality. Thus, further urban planning policy should consider these nature factors. [ABSTRACT FROM AUTHOR]

The planetary boundary layer height is a very important parameter in the atmosphere because it determines the range where the most effective dispersion processes take place, and it serves as a medium for the vertical transport of heat, moisture, and pollutants. The accurate estimation of boundary layer height (BLH) is vital for air pollution prediction. In this paper, the BLH estimated by AD-Net was compared with that from the ECMWFs over East Asia from September 2015 to August 2018. A continuous 24 h BLH estimation from AD-Net generally matched with the aerosol vertical structures. Diurnal and seasonal variation and spatial variation of BLH can also be shown, suggesting the good performance of AD-Net BLH. The comparison of seasonal mean BLH between AD-Net and ECMWFs was conducted at 20 lidar sites. On average, there was an underestimation of the ECMWFs, mostly in summer and winter. A significant disagreement between AD-Net and the ECMWFs was noted, especially over coastal areas and mountain areas. In order to investigate the difference between them, two BLHs were compared under different land cover types and climate conditions. In general, the BLH of the ECMWFs was less than that of AD-Net over most of the land cover types in summer and winter. The smallest differences (0.26 km) existed over water surfaces in winter compared with AD-Net, and the largest underestimation (1.42 km) occurred over grassland surfaces in summer. Similarly, all the BLHs of the ECMWFs were lesser than those of AD-Net under different climatological conditions in summer and winter. The mean difference between AD-Net BLH and ECMWFs BLH was 1.05, 0.71, and 0.48 km for arid regions, semi-arid and semi-wet regions, and wet regions, respectively. The largest underestimation occurred over arid regions in winter, with a value of 1.42 km. The smallest underestimation occurred over wet regions, with a value of 0.27 km. The present research provides better insight into the BLH performance in the ECMWFs reanalysis data. The new continuous PBL dataset can be used to improve the model parameterization of PBL and our understanding of the atmospheric transport of pollutants which affect air quality and human health. [ABSTRACT FROM AUTHOR]

Based on multiple linear regression (MLR) models, we estimated the PM2.5 at Seoul using a number of aerosol optical depth (AOD) values obtained from ground-based and satellite remote sensing observations. To construct the MLR model, we consider various parameters related to the ambient meteorology and air quality. In general, all AOD values resulted in the high quality of PM2.5 estimation through the MLR method: mostly correlation coefficients >~0.8. Among various polar-orbit satellite AODs, AOD values from the MODIS measurement contribute to better PM2.5 estimation. We also found that the quality of estimated PM2.5 shows some seasonal variation; the estimated PM2.5 values consistently have the highest correlation with in situ PM2.5 in autumn, but are not well established in winter, probably due to the difficulty of AOD retrieval in the winter condition. MLR modeling using spectral AOD values from the ground-based measurements revealed that the accuracy of PM2.5 estimation does not depend on the selected wavelength. Although all AOD values used in this study resulted in a reasonable accuracy range of PM2.5 estimation, our analyses of the difference in estimated PM2.5 reveal the importance of utilizing the proper AOD for the best quality of PM2.5 estimation. [ABSTRACT FROM AUTHOR]

Energy consumption in Bangladesh increased for economic, industrial, and digitalization growth. Reductions in conventional sources such as natural gas (54%) and coal (5.6%) are calls to enhance renewable resources. This paper aims to investigate the atmospheric variables for potential wind zones and develop a statistical power-forecasting model. The study-site is Bangladesh, focusing on eight divisions across two regions. First, the southern zone includes Dhaka (Capital), Chittagong, Barishal, and Khulna. The northern regions are Rajshahi, Rangpur, Mymensingh, and Sylhet. This investigation illustrates wind (m/s) speeds at various heights (m) and analyzes the boundary layer height (BLH) from the European Center for Medium Range Weather Forecast reanalysis 5th generation (ERA5). The data is from a period of 40 years from 1979 to 2018, assessing with a climatic base of 20 years (1979 to 2000). The climatological analysis comprises trends, time series, anomalies, and linear correlations. The results for the wind speed (BLH) indicate that the weakest (lower) and strongest (higher) regions are Sylhet and Barishal, respectively. Based on power-curve relationships, a simple power predictive model (SPPM) is developed using global wind atlas (GWA) data (sample: 1100) to estimate the power density (W/m2) and found an accuracy of 0.918 and 0.892 for Exponential (EXP) and Polynomial (PN) with mean absolute percentage errors (MAPE) of 22.92 and 21.8%, respectively. For validation, SPPM also forecasts power incorporating historical observations for Chittagong and obtains correlations of 0.970 and 0.974 for EXP and PN with a MAPE of 10.26 and 7.69% individually. Furthermore, calculations for annual energy production reveal an average megawattage of 1748 and 1070 in the southern and northern regions, with an MAPE of 15.71 and 5.85% for EXP and PN models, except Sylhet. The SPPM's predictability can be improved with observed wind speeds and turbine types. The research wishes to apply SPPM for estimating energy in operational power plants. [ABSTRACT FROM AUTHOR]

Satellite-based monitoring can retrieve ground-level PM2.5 concentrations with higher-resolution and continuous spatial coverage to assist in making management strategies and estimating health exposures. The Sichuan Basin has a complex terrain and several city clusters that differ from other regions in China: it has an enclosed air basin with a unique planetary boundary layer dynamic which accumulates air pollution. The spatiotemporal distribution of 1-km resolution Aerosol Optical Depth (AOD) in the Sichuan Basin was retrieved using the improved dark pixel method and Moderate Resolution Imaging Spectroradiometer (MODIS) data in this study. The retrieved seasonal AOD reached its highest values in spring and had the lowest values in autumn. The higher correlation (r = 0.84, N = 171) between the ground-based Lidar AOD and 1-km resolution MODIS AOD indicated that the high-resolution MODIS AOD could be used to retrieve the ground-level PM2.5 concentration. The Lidar-measured annual average extinction coefficient increased linearly with the Planetary Boundary Layer Height (PBLH) in the range of 100~670 m, but exponentially decreased between the heights of 670~1800 m. Both the correlation and the variation tendency of simulated PBLH from the Weather Research and Forecasting (WRF) model & Shin-Hong (SHIN)/California Meteorological (CALMET) model (WRF_SHIN/CALMET) were closer to the Lidar observation than that of three other Planetary Boundary Layer (PBL) schemes (the Grenier-Bretherton-McCaa (GBM) scheme, the Total Energy-Mass Flux (TEMF) scheme and the University ofWashington (UW) scheme), which suggested that the simulated the Planetary Boundary Layer Height (PBLH) could be used in the vertical correction of retrieval PM2.5. Four seasonal fitting functions were also obtained for further humidity correction. The correlation coefficient between the aerosol extinction coefficient and the fitted surface-level PM2.5 concentration at the benchmark station of Southwest Jiao-tong University was enhanced significantly from 0.62 to 0.76 after vertical and humidity corrections during a whole year. During the evaluation of the retrieved ground-level PM2.5 with observed values from three cities, Yibin (YB), Dazhou (DZ), and Deyang (DY), our algorithm performed well, resulting in higher correlation coefficients of 0.78 (N = 177), 0.77 (N = 178), and 0.81 (N = 181), respectively. [ABSTRACT FROM AUTHOR]

The aerosol optical depth (AOD) from satellites or ground-based sun photometer spectral observations has been widely used to estimate ground-level PM2.5 concentrations by regression methods. The boundary layer height (BLH) is a popular factor in the regression model of AOD and PM2.5, but its effect is often uncertain. This may result from the structures between the stable and convective BLHs and from the calculation methods of the BLH. In this study, the boundary layer is divided into two types of stable and convective boundary layer, and the BLH is calculated using different methods from radiosonde data and National Centers for Environmental Prediction (NCEP) reanalysis data for the station in Beijing, China during 2014–2015. The BLH values from these methods show significant differences for both the stable and convective boundary layer. Then, these BLHs were introduced into the regression model of AOD-PM2.5 to seek the respective optimal BLH for the two types of boundary layer. It was found that the optimal BLH for the stable boundary layer is determined using the method of surface-based inversion, and the optimal BLH for the convective layer is determined using the method of elevated inversion. Finally, the optimal BLH and other meteorological parameters were combined to predict the PM2.5 concentrations using the stepwise regression method. The results indicate that for the stable boundary layer, the optimal stepwise regression model includes the factors of surface relative humidity, BLH, and surface temperature. These three factors can significantly enhance the prediction accuracy of ground-level PM2.5 concentrations, with an increase of determination coefficient from 0.50 to 0.68. For the convective boundary layer, however, the optimal stepwise regression model includes the factors of BLH and surface wind speed. These two factors improve the determination coefficient, with a relatively low increase from 0.65 to 0.70. It is found that the regression coefficients of the BLH are positive and negative in the stable and convective regression models, respectively. Moreover, the effects of meteorological factors are indeed related to the types of BLHs. [ABSTRACT FROM AUTHOR]

The top of the boundary layer, referred to as the planetary boundary layer height (BLH), is an important physical parameter in atmospheric numerical models, which has a critical role in atmospheric simulation, air pollution prevention, and climate prediction. The traditional methods for determining BLHs using Doppler lidar vertical velocity variance ( σ w 2 ) can be classified into the variance and peak methods, which depend on atmospheric conditions due to their use of a single threshold, hence limiting their ability to estimate diurnal BLHs. Edge detection (ED) was later introduced in BLH estimation due to its ability to identify the 2D gradient of an image. A key step in ED is automatically identifying the edge of BLHs based on the peaks of the profile, hence avoiding the influence of extreme atmospheric conditions. Two cases in the diurnal cycle on 4 March 2019 and 8 July 2019 reveal that ED outperforms both the variance and peak methods in nighttime and extreme atmospheric conditions. The retrieved BLHs from 2018 to 2020 were compared with radiosonde (RS) measurements for the same time at the neutral, stable, and convective boundary layers. The correlation coefficient (R: 0.4 vs. 0.05, 0.14; 0.26 vs. −0.10, −0.16; 0.35 vs. 0.01, 0.16) and root mean square error (RMSE (km): 0.58 vs. 0.82, 0.90; 0.37 vs. 1.01, 0.50; 0.66 vs. 0.98, 0.82) obtained by the ED method were higher and lower than those obtained by the variance and peak methods, respectively. The mean absolute error (MAE) of the ED method under the NBL, SBL, and CBL conditions are lower than the variance and peak methods (MAE (km): 0.44, 0.14, 0.50 vs. 0.62, 0.34, 0.64; 0.59, 0.75, 0.74), respectively. The mean relative error (MRE) of the ED method is lower than the variance and peak methods under the NBL condition (MRE: −8.88% vs. −18.39%, 13.91%). Under the SBL, the MRE of the ED method is lower than the variance method and higher than the peak method (−38.64%, vs. −152.23%; 14.02%). Under the CBL, the MRE of the ED method is lower than the variance method and higher than the peak method (−15.07% vs. 2.24%; 5.64%). In addition, the comparison between ED and wavelet covariance transform (WCT) method and RS measurements showed that the ED method has a similar performance with the WCT method and is even better. In the long-term analysis, the hourly and monthly BLHs in the diurnal and annual cycles, respectively, as obtained by ED, were highly consistent with the RS measurements and obtained the lowest standard error. In the annual cycle, the retrieved BLHs in summer and autumn were higher than those retrieved in spring and winter. [ABSTRACT FROM AUTHOR]

High-precision and -resolution atmospheric boundary layer height (BLH) has received increasing attention in air pollution research in recent years. The low time resolution of sounding data is the main challenge to validate BLH retrieval from lidar observations. To resolve this issue, we conducted simultaneous tethered balloon sounding and lidar observations at the Semi-Arid Climate and Environment Observatory of Lanzhou University (SACOL) during winter 2019–2020. The BLHs derived from the tethered balloon sounding data were 170, 210, 393, 676, 423, and 190 m at 02:00, 08:00, 11:00, 14:00, 17:00, and 20:00 (Beijing time), respectively. The diurnal evolution of BLH was reasonably captured by lidar observation-based wavelet covariance transform and ideal profile fitting methods, which exhibited correlation coefficients of 0.91 and 0.89, respectively, with the BLHs determined from tethered balloon sounding data. The lidar results slightly overestimated the BLHs, though all results were acceptable when considering both the absolute and relative errors with respect to BLHs from the tethered balloon data. Our results revealed high-precision and -resolution diurnal variations in BLH at SACOL in Northwest China and suggest the importance of validating lidar-based BLHs using simultaneous sounding data. [ABSTRACT FROM AUTHOR]

The planetary boundary layer height (PBLH) is the atmospheric region closest to the earth's surface and has important implications on weather forecasting, air quality, and climate research. However, lidar-based methods traditionally used to determine PBLH—such as the ideal profile fitting method (IPF), maximum gradient method, and wavelet covariance transform—are not only heavily influenced by cloud layers, but also rely heavily on a low signal-to-noise ratio (SNR). Therefore, a random sample fitting (RANSAF) method was proposed for PBLH detection based on combining the random sampling consensus and IPF methods. According to radiosonde measurements, the testing of simulated and satellite-based signals shows that the proposed RANSAF method can reduce the effects of the cloud layer and significantly fluctuating noise on lidar-based PBLH detection better than traditional algorithms. The low PBLH bias derived by the RANSAF method indicates that the improved algorithm has a superior performance in measuring PBLH under a low SNR or when a cloud layer exists where the traditional methods are mostly ineffective. The RANSAF method has the potential to determine regional PBLH on the basis of satellite-based lidar backscatter profiles. [ABSTRACT FROM AUTHOR]

The diurnal evolution of the atmospheric boundary layer—the lowermost part of the atmosphere where the majority of human activity and meteorological phenomena take place—is described by its depth. Additionally, the boundary layer height (BLH) and the turbulence intensity strongly impact the pollutant diffusion, especially during transition periods. Based on integrated observations from a 325-m meteorological tower and a Doppler Wind lidar in the center of Beijing, the entire diurnal cycle of urban BLH in December 2016 was characterized. Results highlight that the Doppler lidar exhibited it is well suited for monitoring convective BLH while it trudges in monitoring stable BLH, while a 325-m meteorological tower provided an important supplement for Doppler lidar under nocturnal boundary layer and heavily polluted conditions. For the diurnal cycle, under light wind condition, the pattern of urban BLH was largely modulated by thermal forcing of solar radiation and may partly be affected by wind speed. While under strong wind condition, the pattern of urban BLH was largely modulated both by thermal forcing and dynamical forcing. The present work also presented evidence for several new features in the morning and afternoon transitions of the urban boundary layer, showing the duration of the morning transition varied between 1 and 5 h, with the largest value occurring under weak wind with high PM2.5 concentration; while the afternoon transition ranged from 3 to 6 h, which was positively (negatively) correlated to wind speed (PM2.5 concentration). Our work highlights that weak wind speed (weak dynamic motion) and heavy aerosol pollution (weak thermal forcing due to the effect of cooling) can dramatically affect the evolution of the boundary layer. [ABSTRACT FROM AUTHOR]

A detailed understanding of atmospheric boundary layer (ABL) processes is key to improve forecasting of pollution dispersion and cloud dynamics in the context of future climate scenarios. International networks of automatic lidars and ceilometers (ALC) are gathering valuable data that allow for the height of the ABL and its sublayers to be derived in near real time. A new generation of advanced methods to automatically detect the ABL heights now exist. However, diversity in ALC models means these algorithms need to be tailored to instrument-specific capabilities. Here, the advanced algorithm STRATfinder is presented for application to high signal-to-noise ratio (SNR) ALC observations, and results are compared to an automatic algorithm designed for low-SNR measurements (CABAM). The two algorithms are evaluated for application in an operational network setting. Results indicate that the ABL heights derived from low-SNR ALC have increased uncertainty during daytime deep convection, while high-SNR observations can have slightly reduced capabilities in detecting shallow nocturnal layers. Agreement between the ALC-based methods is similar when either is compared to the ABL heights derived from temperature profile data. The two independent methods describe very similar average diurnal and seasonal variations. Hence, high-quality products of ABL heights may soon become possible at national and continental scales. [ABSTRACT FROM AUTHOR]

The turbulent mixing and dispersion of air pollutants is strongly dependent on the vertical structure of the wind, which constitutes one of the major challenges affecting the determination of boundary layer height (BLH). Here, an adaptive method is proposed to estimate BLH from measurements of radar wind profilers (RWPs) in Beijing (BJ), Nanjing (NJ), Chongqing (CQ), and Wulumuqi (WQ), China, during the summer of 2019. Validation against simultaneous BLH estimates from radiosondes (RSs) yielded a correlation coefficient of 0.66, indicating that the method can be used to derive BLH from RWPs. Diurnal variations of BLH and the ventilation coefficient (VC) at four sites were then examined. A distinct diurnal cycle of BLH was observed over all four cities; BLH gradually increased from sunset, reached a maximum in the afternoon, and then dropped sharply after sunset. The maximum hourly average BLH (1.426 ± 0.46 km) occurred in WQ, consistent with the maximum hourly mean VC larger than 5000 m2/s observed there. By comparison, the diurnal variation of VC was not strong, with values ranging between 2000 and 3000 m2/s, likely owing to the high-humidity environment. Furthermore, surface sensible heat flux, latent heat flux, and dry mass of particulate matter with aerodynamic diameter ≤2.5 µm (PM2.5) concentrations were found to somehow affect the vertical structure of wind and thermodynamic features, leading to a difference between RS and RWP BLH estimates. This indicates that the atmospheric environment can affect BLH estimates using RWP data. The BLH results from RWPs were better in some specific cases. These findings show great potential of RWP measurements in air quality research, and will provide key data references for policy-making toward emission reductions. [ABSTRACT FROM AUTHOR]

Air pollution can endanger human health, especially in urban areas. Assessment of air quality primarily relies on ground-based measurements, but these provide only limited information on the spatial distribution of pollutants. In recent years, satellite derived Aerosol Optical Depth (AOD) has been used to approximate particulate matter (PM) with varying success. In this study, the relationship between hourly mean concentrations of particulate matter with a diameter of 10 micrometers or less (PM10) and instantaneous AOD measurements is investigated for Berlin, Germany, for 2001–2015. It is found that the relationship between AOD and PM10 is rarely linear and strongly influenced by ambient relative humidity (RH), boundary layer height (BLH), wind direction and wind speed. Generally, when a moderately dry atmosphere (30% < RH ≤ 50%) coincides with a medium BLH (600–1200 m), AOD and PM10 are in the same range on a semi-quantitative scale. AOD increases with ambient RH, leading to an overestimation of the dry particle concentration near ground. However, this effect can be compensated if a low boundary layer (<600 m) is present, which in turn significantly increases PM10, eventually leading to satellite AOD and PM10 measurements of similar magnitude. Insights of this study potentially influence future efforts to estimate near-ground PM concentrations based on satellite AOD. [ABSTRACT FROM AUTHOR]